WEYRAUCH oHG

Condition: used, Year of construction: 1987, We are offering this used Donau DR 40-Z high-speed radial drilling machine, year of manufacture 1987. Hjdey Dn E Njpfx Ampol Manufacturer: Donau Model: DR 40-Z Serial number: 1146-3 If you have any questions or require further information, please feel free to send us a message. The machine is located in Osterode/Harz. Viewing can be arranged by appointment. This is a used machine, therefore we sell under exclusion of any warranty.

Condition: used, Year of construction: 1989, bore capacity in steel (diameter) 32 mm arm length 1230 mm table surface area 1200 x 500 mm bore stroke 180 mm Hedpfx Asy Aa H Nsmpsl feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds 60 - 1800 U/min taper MK 4 total power requirement 2,7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device

Condition: good (used), Year of construction: 1979, functionality: fully functional, Drilling capacity into full 32 mm Tapping capacity into full M 32 mm Hodpfoyzxzijx Ampol Motor power 1.5 / 3 kW Tool holder MK 4 Quill stroke 170 mm Stroke approx. 400 mm Speeds : Range 1 , infinitely variable from 38 - 192 rpm Range 2 , infinitely variable from 119 - 596 rpm Range 3 , infinitely variable from 400 - 2000 rpm

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Traversing arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Hedpfx Ameyxw Ddepol Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacities Drilling capacity (solid): St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Condition: refurbished (used), Year of construction: 2002, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Completely overhauled in 2026 • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drilling spindle Morse taper 4 • Infinitely variable speed adjustment • Stepless quill feed • Thread cutting device • Two 18 mm T-slots each on the machine base at rear and left • Machine lamp • Central lubrication • Table surface machined all around • Safety guard on drill • Coolant system Dimensions and Travel Tool holder: MT 4 Column diameter: 195 mm Table dimensions: 1200 x 750 mm Number of T-slots: 5 T-slot spacing: 125 mm Quill stroke: 220 mm Column stroke: 450 mm Distance, spindle nose — min. 40 mm to top of table: max. 710 mm Distance, spindle nose — min. 840 mm to base plate: max. 1510 mm Drilling radius: min. 540 mm max. 1590 mm Work table height: 900 mm Machining Data Drilling capacity (solid): St 60 up to Ø 45 mm GG 22 up to Ø 55 mm Tapping: St 60 up to M36 GG 22 up to M45 Hjdpoyv A Ucjfx Ampel Main Spindle Drive AC motor, frequency-controlled Power: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: up to 250 Nm, constant across 15 – 200 rpm Feed Drives Infinitely variable feed: 0.02 – 0.7 mm/rev Feed force: 12,000 N Electrical Data Operating voltage / freq.: 400 V / 50 Hz Control voltage: 24 V Total connected load: 9.3 kVA Weight DANUFLEX 145 (without packaging) With 750 x 1200 mm table: 2600 kg Documentation Operating manual, including Lubrication and hydraulic diagram Electrical schematic

Condition: good (used), Year of construction: 2003, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine configuration • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device Dimensions and Travel Ranges Tool holder SK 40 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill travel (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle lower edge – table top min mm 70 / max mm 680 Distance spindle lower edge – floor min mm 970 / max mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacities Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 @ 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis AC servo motor kW 0.25 Y-axis AC servo motor kW 0.25 Z-axis AC servo motor kW 4.50 W-axis AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feed rate stepless mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, values absolute or incremental Units: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions by machining operation, material-dependent cutting data suggestions Tool management: up to 500 tools Subroutine technology: yes Machining Cycles Hjdpeyuqmiofx Ampol Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X,Y,Z axes, program re-start with selectable functions for targeted entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - arbitrarily mounted rectangular parts - arbitrarily mounted round parts - alignment of cast and flame-cut parts - angular position detection for round parts by probing reference edges or surfaces Test graphic: Graphical display of drilling patterns.

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Model: Donauflex 135 Year of manufacture: 2020 Hodpfxeyucahj Ampol Condition: Very good, used but like new Available immediately from stock.

Condition: refurbished (used), functionality: fully functional, table length: 1,200 mm, table width: 500 mm, spindle mount: MK 3, height adjustment type: electric, Donau DR23 Radial Drilling Machine – Robust Quality Machine For sale is a reliable Donau DR23 radial drilling machine, ideal for workshops, metalworking, or industrial applications. The machine impresses with its sturdy design, high precision, and versatile applications for drilling, countersinking, and thread cutting. Details: Manufacturer: Donau Model: DR23 Radial drilling machine overhauled by Vaumtec Quick-change chuck Stable cast construction Adjustable arm for flexible machining of large workpieces Hodpfx Amsyrtkxspjl Suitable for steel, aluminum, and other metals Forward and reverse rotation

Condition: ready for operation (used), Donau Danumeric 440 Radial Drilling Machine Drilling capacity (steel): Ø 40 mm Thread cutting: up to approx. M36 (depending on material) Tool holder: SK 40 Hodpfsyrdc Sex Ampjl Spindle speed: approx. 15 – 2,800 rpm (infinitely variable) Feed: infinitely variable approx. 5 – 2,000 mm/min Quill stroke (Z): 200 mm Column stroke (W): 410 mm Arm traverse: 1,050 mm Drilling radius: approx. 540 – 1,290 mm Arm swivel range: approx. 330° Column diameter: 195 mm You are welcome to arrange a viewing. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued (a valid VAT ID number is required). Interim sale reserved. Visit our shop and take a look at our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may vary and errors in the item description are reserved.

Condition: good (used), Year of construction: 1998, DONAU DANUMERIC 440, year of manufacture 1998 Technical specifications: - Table 1800 x 600 mm, 4 T-slots - Drilling radius 540 – 1590 mm - Spindle taper SK40 - Speed range 15 – 2800 rpm Hodpeyplb Rofx Ampel - Motor power 5.5 kW - Weight approx. 2,800 kg

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Hsdpoynt Ucofx Ampel Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Hjdpeylnpijfx Ampjl Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Hsdpfxoyhdvko Ampol Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: used, Year of construction: 1984, bore capacity in steel (diameter) 32 mm arm length 950 mm turning speed range 51 - 1000 U/min turning speeds steps 12 bore spindles - Morse Taper MK 4 quill stroke 160 mm feed range 0,075 x 0,3 mm/min table surface area 1200 x 510 mm total power requirement 2 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 1,8 x 1,2 x 2,25 m High-speed radial end mill with Hedpfx Ajyfwzbempsl - Thread cutting attachment - Vertical table 750 x 620 mm - Horizontal table 1200 x 510 mm - Emergency stop device - Documentation Machine-No. 445

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 (MK 4) • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting attachment • Two 18 mm T-slots each on rear and left of machine base • 3-axis digital readout • Machine lamp • Central lubrication • Table top machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column travel mm 450 Distance spindle nose - table top min 40 mm, max 710 mm Distance spindle nose - base plate min 840 mm, max 1510 mm Drilling radius min 540 mm, max 1590 mm Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 mm GG 22 ⌀ 55 mm Tapping St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Hsdpfsx Uwpxox Ampol Speed range min⁻¹ 15 – 2,800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Feed, stepless mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic system diagram Electrical wiring diagram

Condition: refurbished (used), Year of construction: 1980, Worktable 500mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Hedpfxex N Ih Ie Ampol Coolant system Safety device at the drill Completely overhauled in 2026

Condition: used, Year of construction: 1991, spindle mount: MK 4, Work table 600mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 40mm in steel Thread cutting device Coolant system Hsdpfex N Iftsx Ampel Documentation

Condition: ready for operation (used), Offered is a rapid radial/column drilling machine. Drilling capacity: up to approx. Ø50mm. Speed range: 58-1275rpm. Thread cutting device: available, outreach: 920mm, machine lamp: available, baseplate/table size X/Y: approx. 1100mm/400mm, T-slots: 2 at the rear left, motor power: approx. 1.5kW without coolant system, machine weight: approx. 1200kg. Inspection under power by arrangement possible. Hodpfx Amjx Db U Uspjl

Condition: used, Year of construction: 1960, Technical details: workpiece height max.: 600 mm Arm length: ca. 700 mm Hjdpfex Afn Nsx Ampjl bore capacity in steel (diameter): 25 mm Table dimensions: 1100 x 400 mm

Condition: good (used), DONAU DR 23 – High-Speed Radial Drilling Machine - Drilling capacity / steel approx. 28 mm - Arm reach 700 mm - Morse taper MK3 - Speed range 70-1550 rpm (gearbox) - Automatic feeds 0.075-0.3 mm - Thread cutting device - Drilling depth approx. 130 mm - Hydraulic clamping - Documentation Dimensions: Hedpfx Amsxzqauopel LxWxH 2x1.7x1.9 meters / Weight 1900 kg Subject to errors and input mistakes

Condition: new, Year of construction: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 1,000 mm, table length: 4,000 mm, table width: 2,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, X: 3000x2000 mm Y: 1500 mm Z: 1000 mm C-axis 360° Positioning resolution Feed range 3000 mm/min Traverse speed 18000 mm/min Working area 4000*2000*1250 mm Table size 3200*1600 mm Distance between head and table without C-axis is 1500 mm and with C-axis 1470 mm Max table load 25,000 kg Hjdpexr Uzwefx Ampjl Machine dimensions 6640 x 5800 x 4120 mm Machine weight 37,000 kg

Condition: used, Year of construction: 1987, Work table 750mm x 1200mm Arm travel 800mm Tool holder MK 3 Drilling capacity 28mm in steel Thread cutting device Hodsxpfhvopfx Ampsl Coolant system Documentation

Condition: used, Year of construction: 1991, Work table 600mm x 1200mm Hjdpfxjxpfgle Ampjl Column travel 600mm Tool holder MK 3 Drilling capacity 28mm in steel Tapping device Coolant system Documentation

Condition: like new (used), Year of construction: 2021, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Hodpfxjxn A Spo Ampjl Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: used, bore capacity in steel (diameter) 32 mm arm length 950 mm turning speed range 102 - 2000 U/min turning speeds steps 12 bore spindles - Morse Taper MK 4 quill stroke 160 mm feed range 0,075 x 0,3 mm/min Hsdpfexfb Haox Ampsl table surface area 1200 x 510 mm total power requirement 2 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 1,8 x 1,2 x 2,25 m Compact style with hydraulic fast-clamping, motorised height adjustment, feeder device and thread-cutting device. Integrated coolant container in machine frame. Main switch.