AB BLRT Grupp Invest

Condition: used, Year of construction: 2011, controller manufacturer: Fanuc, controller model: 30i, _____ Description: Year of manuf. : 2011 Control : Fanuc 30i In General: Year of manufacture:2011 Control system:Fanuc 30i Maximum table load:100 kg Travel range X/Y/Z:300/300/370 mm Installation weight:approx. 33,000 kg Machining station I (X/Y/Z/B): Technology:1 x vertical spindle Speed:8,000 rpm Tool holder:HSK-A 63 Power:31 kW Torque:197 Nm Tool changer:12 stations B-axis:0.001°, pneumatic indexing, clamping force Tool diameter/length:125/250 mm Machining station II (X/Y/Z/B): Technology:1 x vertical spindle + 1 x horizontal spindle Speed:8,000 rpm Tool holder:HSK-A 63 Power:31 kW Torque:197 Nm Tool changer:12 stations B-axis:0.001°, pneumatic indexing, clamping force Tool diameter/length:125/250 mm Machining station III (X/Y/Z/B): Technology:1 x vertical spindle Speed:8,000 rpm Tool holder:HSK-A 63 Power:31 kW Torque:197 Nm Tool changer:12 stations B-axis:0.001°, pneumatic indexing, clamping force Tool diameter/length:125/250 mm Machining station IV (X/Y/Z/B): Technology:1 x vertical spindle + 1 x horizontal spindle Speed:8,000 rpm Tool holder:HSK-A 63 Power:31 kW Torque:197 Nm Tool changer:12 stations B-axis:0.001°, pneumatic indexing, clamping force Tool diameter/length:125/250 mm Loading station: Numbers:2 pieces (front and rear) Psdpfezfu Rfsx Al Nopu Equipment: Position measurement systems:Direct on all axes Chip removal:Chip conveyor Coolant supply:IKZ system, 30 bar Tool breakage monitoring:Artis, type CTM V5 Zero-point clamping system:Erowa Emulsion mist separator:Reven

Condition: ready for operation (used), A complete Winema CNC rotary transfer production line including interlinking, peripherals and a washing system is available. 1) Winema RV20 Flexmaster rotary transfer machining center, stations: 6, machining positions: 12, max. material passage: 42mm, internal thread 1: M16x1.5, internal thread 2: M20x1.5, holes: 8.7mm/15mm/17mm/18mm, reaming: 9mm/15mm/18mm, cycle time: approx. 7s, throughput capacity: approx. 500parts/h, control system: Siemens Sinumerik 840D. 2) Winema bar loading magazine, tube support: 800mm, max. tube thickness: 2mm, max. bar length: 3200mm. 3) Knoll Turbofilter coolant cleaning system, dirty tank volume: 500l, clean tank volume: 150l, filter fineness: 50mm. 4) Knoll cooling unit, cooling capacity: 15kW, max. oil temperature: 30°C. 5) UAS oil mist extraction system, separation efficiency: 96%-98%. 6) Interlinked continuous washing system with automatic parts transfer. 7) Hydraulic system. 8) Conveyor units. 9) Fire extinguishing system. This is a complete and interlinked system for NC control valve production. The production of additional components can presumably be set up. Documentation available. An on-site inspection is possible. Pjdpfezbl N Ssx Al Nepu

Condition: used, Year of construction: 2017, BTB ROTARY TRANSFER MACHINE – MDL. TRO 8S 14U ISO CNEL – NEW 2017 MANUFACTURER – BTB COUNTRY OF ORIGINE – ITALY STATUS – INSTALLED TYPE – ROTARY TRANSFER MACHINE YEAR – 2017 MODEL – TRO 8S 14U ISO CNEL WEIGHT – 23,000 KG NUMBER OF STATIONS – 8 MACHINING STATIONS UNITS – 14 MACHINING UNITS CNC CONTROL – FANUC Ppsdjzafbxepfx Al Nju MACHINE CAPABILITIES – SIMULTANEOUS MULTI-AXIS OPERATIONS INCLUDING DRILLING, MILLING, TAPPING AND TURNING WORKPIECE HANDLING - AUTOMATED LOADING AND UNLOADING SYSTEMS COOLANT SYSTEM – INTEGRATED HIGH-PRESSURE COOLLANT DELIVERY SPINDLE TAPER SYSTEM – ISO 40 TOOL TAPER CNEL – EUROPEAN NOISE EMISSION STANDARDS DIAGNOSTIC SYSTEM EQUIPPED LIFTING/HANDLING UNIT – CASTELLETTO UZZONE ERI-2000 LIFTING UNIT – 2000 KG CAPACITY, 2.2 KW MOTOR ROBOTS – AUTOAZIONE INDUSTRIALI AUTOMATION TYPE - R.C.S.T./C.VIS. ROBOTS – DUAL MH24 UNITS FROM YASKAWA MOTOMAN ROBOT PAYLOAD – 24 KG REACH – 1717MM REPEATABILITY – 0.08MM (+/-) AXIES – 6 AXIS ARTICULATED ARM WEIGHT – APPROX 540 KG PER ROBOT CONTROL – DX200 OR NX100 DEPENDING ON CONFIGURATION MAXIMUM SPEED J1 (S-axis): 170°/sec J2 (L-axis): 170°/sec J3 (U-axis): 175°/sec

Condition: like new (used), Year of construction: 2023, functionality: fully functional, The company sells Ransburg NO-2-701A. The machine is brand new. Ransburg No.2 Electrostatic Spray Gun The Ransburg No.2® electrostatic spray gun provides ultra-fine atomization and nearly 100% paint transfer efficiency. The system uses an air-driven rotating spray bell to create a high-quality electrostatic finish with minimal overspray. It is designed for professional coating applications and is especially suitable for intricate metal parts, fences, gates, railings, wire products, office furniture refurbishment, and other industrial painting tasks. Technical Specifications Maximum output voltage: 90 kV Air consumption: max. 150 l/min Weight: 1.25 kg Length: 500 mm Power supply: 230 V / 50 Hz Protection class: IP54 Included in the complete system: Electrostatic hand spray gun with 4” bell 7.5 m high voltage cable 7.5 m fluid hose 7.5 m air hose High voltage control unit Air filter/regulator Ppedpsy Tbtfjfx Al Nsu 10 L pressure tank Cart frame system

Condition: used, ZUMBACH - JUROCA Z 14 is a Rotary transfer machine of high precision, engineered for excellent accuracy and reliability. Capacities: 14 working positions, 6 CNC-controlled and 8 mechanical; 1 loading/unloading station; table travel 20 mm; workspace 40 mm; screw diameters 75/35/42 mm; spindle speeds 3000–18000 t/min; production 35 pcs/min. Technical data: 3x400 V 50 Hz supply; machine weight ~3500 kg; footprint 2000×2000×2400 mm; control cabinet 1200×1200×2100 mm. Equipment: integrated control cabinet (dimensions given). Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Ppjdpfx Aley S Dfzj Nsu

Condition: used, Year of construction: 2002, Article: Rotary transfer machine Manufacturer: Pfiffner Type: Hydromat HB-32/45 Yob: 2002 Ppsdpfxey N Agrs Al Nju Please, contact us for getting more information and pictures on mail(at) or *

Condition: ready for operation (used), Year of construction: 2011, A horizontal CNC rotary transfer machine Sinico for tube and bar processing is available. Throughput capacity: approx. 2500pieces/h, max. cutting capacity: 110mm, max. workpiece length: 350mm, max. tube diameter: 81mm, max. bar diameter: 40mm, tool holder: HSK-63, machine weight: approx. 16000kg. The machine has an unknown defect. Documentation available. An on-site inspection is possible. Ppjdpoy Nm U Hofx Al Nou

Condition: ready for operation (used), Year of construction: 2005, A horizontal CNC rotary transfer machine Sinico for tube and bar processing is available. Throughput capacity: approx. 2500pieces/h, max. cutting capacity: 81mm, max. workpiece length: 340mm, max. tube diameter: 81mm, max. bar diameter: 40mm, tool holder: HSK-63, machine weight: approx. 16000kg. Documentation available. An on-site inspection is possible. Pedpfx Aoy Nm U Tel Nepu

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, coolant tank capacity: 1,800 l, Equipment: documentation/manual, - 16 TOOL STATIONS - YEAR OF PRODUCTION 2000 (ONLY 3 YEARS PRODUCTIVE USE) - INCL. BAR FEEDER “IEMCA” (2 t CAPACITY) - INCL. OIL TANK SYSTEM (1.400 l COOLENT CONTENT) - INCL. CHIP CONVEYOR (WITH MUD CLEARING) - INCL. TOOL SETTING EQUIPMENT Pedpsy Nmb Hefx Al Njpu - MAX RATED POWER 40KW / 3 x 400 V - “BOSCH” HYDRAULIC UNITS - “SYNUMERIC 840” OPERATING SYSTEM - DOCUMENTATION - UNDER POWER AVAILABLE FOR INSPECTION - VERY GOOD CONDITION

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: HB32-305, Hydromat HB32/16, double cycle, year of manufacture 2020, location: LOGA Präzisionsteile GmbH, Himmelreich 4-6, 78554 Aldingen. Control: Bosch MTX, HME operating interface Coolant system: Knoll (oil), vacuum rotary filter, low-pressure and high-pressure pumps for internal tool cooling Machine table with 8 collet chucks and 8 two-jaw chucks 1x Stäubli robot for transferring workpieces from the first to the second clamping position 1x loading magazine, 4.2m 1x VE 40/80 sawing unit 8x feed units: VE 36/100 or VE 35/60 5x CNC 50/100 turning units 2x 3-axis CNC milling units Nordmann tool monitoring Pickup conditions: The machine base measures approximately 4 meters in length, 3 meters in height, and 2.5 meters in width. The weight is approx. 6 tons. The other components are demountable. Pjdpfx Aey Nkhdol Nepu The hall is very spacious. There is no crane runway; a forklift is required for disassembly. No forklift is available on site! The aisles are 3 meters wide. There is a large roller gate, and trucks can drive directly up to, or even through, the gate for loading.

Condition: used, Hydromat HB45-12 Ppedpjyzkd Ajfx Al Nsu SN 220291-81 12 Stations Capacity: 45mm Saw, Bar Feed, Inverter Configured as pictured (3-Axis CNC Slide, not included)

Condition: ready for operation (used), Year of construction: 2015, Two similar CNC rotary transfer machines Winema are available. 1) Winema RV20 Evolution Flexmaster, year of manufacture: 2016, stations: 8, cycle time: 12s, machining scope: turning/drilling/milling/grooving/slot machining, collet feed stroke: 400mm, bar diameter: 25mm, length: 4200mm, coolant pressure: 30bar, production output: approx. 2100parts/8h, control: Bosch MTX CNC. Including material handling, Knoll turbo filter system, cooling unit, discharge conveyor, oil mist extraction and bar loading magazine. 2) Winema RV20 Evolution Flexmaster, year of manufacture: 2015, stations: 8, cycle time: 12s, machining scope: turning/drilling/milling/grooving/slot machining, collet feed stroke: 400mm, bar diameter: 25mm, length: 4200mm, coolant pressure: 30bar, production output: approx. 2100parts/8h, control: Bosch MTX CNC (Sinumerik). Including material handling, Knoll turbo filter system, cooling unit, discharge conveyor, oil mist extraction and bar loading magazine. Both machines are specifically designed for the production of rotationally symmetrical components. Documentation available. An on-site inspection is possible. Individual sale possible. Psdpfoyyplvex Al Nspu

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 61062, bar passage: 24 mm, TECHNICAL DETAILS Spindle bore: 24 mm Bar loader Model: IEMCA PRA52 F33 Year of manufacture: 2004 Maximum bar length: 3300 mm Maximum bar diameter: 9.1 mm Control system: Siemens S7-200 Drive for parting unit Stroke per slide: 7.15 mm Actuation angle: 26.565° Facing chuck PKD 80 MACHINE DETAILS Operating voltage: 230 / 400V Frequency: 50 Hz EQUIPMENT Nordmann tool monitoring with touchscreen Tool Monitor Chip conveyor (Knoll 500 K-1/450, year 2004) Oil filtering system (Knoll FKA 150) Scraper conveyor with coolant system High-pressure unit FKA / 250 Tubes with coolant connections Hydraulic unit Central lubrication Hydraulic schematic and accessories Pressure intensifier HC3 - 4.0 - B Deflection plate T-T Pneumatic accessories (for 4 cylinders) Ppedpfoyx Ia Nsx Al Nsu Compressed air service unit DA 300 Clamping plate for chuck TK420 Oil distributor 2-jaw chuck (Röhm, ID no. 431074, stroke 4.25 mm) Cut-off saw with gear transmission Clamping flange (diameter: 100 mm) Spindle unit complete with toothed belt drive Coolant supply Cover plates for empty stations Material stop (stroke: 60 mm) Parting unit extended by 35 mm Measuring system Z-axis Spindle unit with hydraulic NC-axis Device for rinsing the clamping jaws Change parts for material clamping Stops for hydraulic unit carrier Change parts for bar loading magazine Tools Tool holders Additional clamping with collet Further details about the machine can be found in the attached documents.

Condition: ready for operation (used), Year of construction: 1993, A multi-station transfer machine Riello with drilling and tapping units is available. Horizontal working units: 2x drilling units, 2x tapping units, 1x combined unit. Radial working units: 1x drilling unit, 1x tapping unit, 1x combined unit. Quill stroke: 100mm, spindle holder: SK40, rotary table type: TG 320, turret stations: 5, chuck diameter: 200mm, jaw opening travel: 12mm+12mm, spindle holder-chuck center distance: 225mm, total connected load: 23kW. Machine dimensions X/Y/Z: approx. 3700mm/3400mm/3050mm, weight: approx. 5800kg. Documentation available. An on-site inspection is possible. Pjdoytgpwspfx Al Nepu

Condition: new, Year of construction: 2024, working width: 1,500 mm, sheet thickness steel (max.): 20 mm, Hydraulic guillotine shear – built-to-order machine (delivery time approx. 10–14 weeks) – including foot switch, touchscreen, rear installation area with light barrier monitoring, automatic/electric cutting gap adjustment, automatic/electric cutting angle adjustment, hydraulic hold-down, motorized backgauge up to 1000 mm depth Ppsdpjynatlsfx Al Neu - Images similar -

Condition: new, Year of construction: 2025, working width: 3,000 mm, sheet thickness (max.): 10 mm, Hydraulic guillotine shear – made to order (delivery time approx. 10–14 weeks) – includes foot pedal, touchscreen, rear operating area with light curtain monitoring, automatic/electric blade gap adjustment, automatic/electric cutting angle adjustment, hydraulic hold-down, motorized backgauge up to 1000 mm depth Psdsym Uv Ejpfx Al Njpu -Images similar-

Condition: new, Year of construction: 2026, functionality: fully functional, Flexbility: Our Rotaflex machines stand out due to their exceptional flexibility, surpassing that of competitors. These machines are versatile, capable of performing a variety of operations including turning, milling, threading, and recessing. Each station operates independently with up to 5-Axes, ensuring efficient and precise machining. Advanced Turning Capabilities: Rotaflex machines are designed for real turning operations, featuring chucks that can simultaneously position on the B axis and perform turning at speeds up to 6,500 RPM. Please find the demonstration videos below: Psdpfjyg Nwdsx Al Nopu Innovative Plug-and-Run Chucks: Our Plug-and-Run Chucks enable swift chuck changes within seconds, allowing for seamless transitions between jobs. This technology sets Technica apart in the rotary transfer machine industry. Why Choose Technica Rotaflex Machines: Technica machines offer unparalleled versatility and precision, making them ideal for mass production environments that demand high-quality and adaptable machinery. Combining Swiss engineering precision with the multifunctionality, our machines provide reliable and efficient performance.

Condition: used, Technica brand, Stemoflex model rotary transfer machine Ppedpsydcm Hsfx Al Nju

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: HB32-287, TECHNICAL DETAILS Station 1: Sawing Station 2: Drilling Station 3V: Drill Station 3H: Drilling Station 4: CNC Station 5: CNC Station 6V: Thread cutting Station 6H: Drilling Station 7: Turning Station 8: CNC Facing Station 9: CNC Thread Cutting Station 10: Drill Station 11: Drilling Station 12: No Unit Station 13: CNC Station 14: 45° Milling Station 15: 45° Drilling Station 16: 45° Drilling Ppjdpfxsx U Tgas Al Nou MACHINE DETAILS Condition: Dismantled In storage since: August 2024 Connection rating: 400 V, 40 kW EQUIPMENT - Loading magazine - Knoll chip conveyor - Knoll vacuum rotary filter VRF 500 - Machine is sold without the black platform

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 8450-02-001, rotary table diameter: 4,000 mm, Equipment: chip conveyor, TECHNICAL DETAILS Rotary indexing table diameter: 4,000 mm Machining stations: 12 Axis configuration: 4 × 3 axes, 8 × 2 axes Clamping chucks: 12 units for tool holders Drilling units: NC-controlled Accessory systems Chip conveyor: Knoll, type 500K-1/500, year of manufacture 2001 Coolant system: available Filtration system: available Measuring device: integrated MACHINE DETAILS Identification number: 8450-02-001 Customs tariff number: 84573010 Weight Machine: 6,000 kg Control cabinet: 800 kg Coolant system: 600 kg Dimensions Ppodpfx Alexur Rus Neu Working height: 1,170 mm Machine height: 2,220 mm Footprint: 5,231 x 4,540 mm EQUIPMENT - Rotary indexing table with large 4,000 mm diameter for extensive machining operations - 12 NC drilling units with 12-piece clamping chuck setup - Integrated chip conveyor of type Knoll 500K-1/500 - Complete system with filtration and coolant system - Measuring system and automatic loading and unloading for seamless automation

Condition: good (used), Year of construction: 2010, Rotary table Fabr.WEISS Type: TC 220T Year: 2010. Ppjdpfxjxr Dh Ho Al Nou

Condition: used, _____ 2 Pieces of Pfiffner RT 100-12 Description: Year of manuf. : 2013 Control : Siemens 840 D Rotary-Indexing-table/Spindle: Clamping stations:12 motorised spindles Drive:Torque drive, water-cooled Position measuring system:Direct Switching time:1.5 seconds Spindles:Water-cooled motor spindles C-axes:0.001°, hydraulic clamping Speed:5,500 rpm Power:11 kW Clamping device:Chuck Basic modules: Technology:Positioning module, 3-axis X-axis:50 mm Y-axis:100 mm Z-axis:100 mm Position measuring systems:Direct in all axes Coolant supply:Integrated : : Workpiece size (max.):100 x 100 x 100 mm Station 1: Horizontal:feeding of raw parts (indexing conveyor + Stäubli robot) Vertical:Measuring raw part Station 2: Horizontal:4-fold turret without drive Vertical:Measuring reclamping error (C-axis zeroing) Station 3: Horizontal:4-fold turret without drive Vertical:Not used Station 4: Horizontal:4-fold turret without drive Vertical:Not used Station 5: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 6: Horizontal:4-fold turret without drive Vertical:Not used Station 7: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 8: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 9: Horizontal:4-fold turret without drive Vertical:Not used Station 10: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 11: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 12: Horizontal:Charging/discharging unit with double swivelling gripper + discharging belt Podpfx Ajw Si T Ajl Nopu Equipment: Chipmanagement:Chip conveyor High preassure unit:Cooling unit 50 bar Toolmonitoring:Toolbreaktagecontrol ARTIS Rawmaterialfeed:Conveyorbelt with robot Finishpartremoval:Conveyor with 3-way switch Oilmistseparation:Electrostatic filter Fire extraction system:Kraft + Bauer Part labelling:Laser Parts cleaning:HESO cleaning system

Condition: not inspected (used), Year of construction: 1967, Manufacturer: Steinel Model: 5 Station Rotary Transfer Drilling Machine BE 10 VK Year of Manufacture: 1967 Weight: approx. 3,000 kg General / Technical Data: 5-station rotary transfer special drilling machine for horizontal drilling with multi-spindle heads Drilling units: 4 units Station 1 – loading and unloading Station 2 – horizontal drilling unit type: BE 10 VK Station 3 – horizontal drilling unit type: BE 10 VK Station 4 – horizontal drilling unit type: BE 10 VK Station 5 – horizontal drilling unit type: BE 10 VK Feed of drilling units: mechanical feed via quill Drill heads: multi-spindle drilling units Rotary table: mechanical indexing in 5 positions, Ø 400 mm Workpiece clamping: hydraulic, via centric mandrel, workpiece Ø approx. 80 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380 Volt, 50 Hz Accessories / Special features: • Machine is designed for large-scale production • Features a robust cast iron machine table with lateral chip removal and separate coolant tank Podpfxow H Rh So Al Njpu • Automatic safety guard door • Equipped with a 5-station rotary indexing table • Heavy cast iron machine table, ideal for the retrofit or rebuilding of a special purpose machine • Suitable for refurbishment or conversion

Condition: not inspected (used), Year of construction: 1969, Manufacturer: Steinel Model: 6-Station BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg General / Technical specifications: 6-station rotary transfer special-purpose drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 pcs Station 1 – Loading and unloading Station 2 – Vertical drilling unit, type: BE 10 VK Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit, type: BE 6 VK Station 5 – Horizontal spindle unit, type: BE VK, with additional guide. Mounting: slip bush Ø 28 mm Station 6 – Horizontal drilling unit and vertical tapping unit, type: BE 6 VK Feed advance for drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Rotary index table: mechanically indexed in 8 positions, Ø 400 mm Workpiece clamping: manual, via collet Ø 30 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380V, 50 Hz Accessories / Special equipment: • The machine is designed for mass production use • The machine is equipped with a robust cast iron machine table with chip disposal at the rear and a separate large coolant tank (rear outlet) • Safety light curtain (Sick) Ppsdpfx Aljw H I R Re Neu • Extensive accessories: spare parts, spindle units, and rotary indexing table • The machine features a 6-station rotary indexing table • Heavy cast iron machine table, ideal for rebuilding as a special-purpose machine

Condition: ready for operation (used), Two identical rotary transfer machines Eubama including filtration systems are available. Workpiece diameter: 60mm, workpiece length: 320mm, clamping stations: 10, cycle rate: 20/min, spindle stroke: 100mm, drilling capacity steel/brass: 20mm/30mm, threading capacity steel/brass: M30/M40. Documentation available. An on-site inspection is possible. Psdpfew Hglmox Al Njpu