Scheuter Barneveld

Condition: good (used), Year of construction: 2005, functionality: fully functional, pressing force: 50 t, stroke length: 215 mm, Hydraulic Press Brake Make: TRUMPF Model: TrumaBend V500 Year: 2005 Technical Data Manufacturer: Trumpf Model: TrumaBend V500 Year of Manufacture: 2005 Press Force: 50 t Usable Bending Length: 1250 mm Stroke: 215 mm Distance Between Frames:1040 mm Throat Depth (C-frame): 420 mm Installation Height: max. 385 mm Working Speed: 10 mm/s Return Speed: 220 mm/s Voltage: 3 x 400V Rated Current: 21.5 A Connected Load: 8.6 kVA Compressed Air: 6 bar Dimensions (approx.): L 2.00 x W 2.00 x H 2.40 m Weight: 4.9 t Equipment • Trumpf TASC 6000 CNC control • Pneumatic die shifting • Hydraulic upper and lower tool clamping Wila/Trumpf • Controlled axes: Y1, Y2, X, R, Z1, Z2 • Bend-Guard safety light curtain at the front Redjy Icckjpfx Afnot All information without guarantee. A powered demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, pressing force: 50 t, overall weight: 3,350 kg, Equipment: safety light barrier, We are offering this ready-to-use Amada HFE MK2 5012, 50 ton, 4-axis CNC press brake. Year of manufacture: 2016 Press force: 50 tons Max. bending length: 1250 mm Rjdpey H Hgwsfx Afnjt If you have any questions or need further information, please feel free to send us a message or give us a call. The seller assumes no liability for typing or data transmission errors. The machine's condition in terms of appearance, technology, and wear corresponds to its age; used machines are sold without any guarantee or warranty.

Condition: used, Year of construction: 1996, pressure 0050 t chamfer lenght 1270 mm distance between columns 1040 mm stroke 215 mm throat 410 mm dayligth 385 mm back stop - adjustable 860 mm working feed 1 - 10 mm/sec return speed 135 mm/sec total power requirement 8,6 kVA weight of the machine ca. 4750 kg dimensions of the machine ca. 2000 x 2100 x 2400 mm - controlled axes: Y1, Y2, X, R - Pneumatic die shift - hydraulic WILA/TRUMPF upper tool clamp - hydraulic WILA/TRUMPF lower tool clamp - LAN network connection Rodpfjy Hxmiox Afnjt - 4 stop fingers manually adjustable, foldable to the rear, pneumatic clampable - CNC control, operation on the front left - 2-hand operation / foot switch - rear + side protection

Condition: used, Year of construction: 1997, functionality: fully functional, Nominal force: 500 kN Max. eccentric load: 80 kN Max. bending length: 2000 mm Table length: 2000 mm Table width: 60 mm Table height: 965 mm Clearance between press beams: 370 mm Stroke: 100 mm Throat depth: 400 mm Distance between columns: 1690 mm Max. pressure: 31.6 MPa Number of cylinders: 1 Oil capacity: 45 l Rjdpfey Hqkaox Afnjt Motor power: 6 kW Max. approach speed: 79 mm/s Max. working speed: 10 mm/s Max. return speed: 80 mm/s

Condition: used, Year of construction: 2003, pressure 50 t chamfer lenght 1550 mm distance between columns 1150 mm Control CYBELEC DNC 1200 PS Eco column arm 405 mm table height 900 mm stroke of ram 400 mm Rjdpsy D T Tlofx Afnot distance between table / ram 720 mm total power requirement 9,5 kW weight of the machine ca. 5.200 kg dimensions of the machine ca. 2000x1900x2920 mm Accessories/Equipment: - CYBELEC DNC 1200 PS Eco controller - 2 support arms - 4 stop fingers - Lasersafe - Foot switch

Condition: good (used), functionality: fully functional, HACO ERMS 2650 Rsdpfx Aey D A Npefnet

Condition: used, Year of construction: 1990, operating hours: 7,248 h, total length: 3,000 mm, total width: 1,400 mm, total height: 2,200 mm, Weight: 3.450 kg - Year: 1990 - Documentation available: Yes - CE certificate present: No - Serial number: ITPS 050 20 P00356 - Operating hours: 7248 - Drive system: CNC - Power [kW]: 6.5 Redpfxey Dcpve Afnst - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 50 - Max. working width [mm]: 2000 - Column gap [mm]: 1730 - Backgauge depth [mm]: 800 - Max. stroke [mm]: 105 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 3000mm x 1400mm x 2200mm (l x w x h) - Transport weight [kg]: 3450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, machine/vehicle number: C15_2, functionality: fully functional, Electric press brake C15 with spindle drive CoastOne - Made in Finland New machine Pressing force: 52t Bending length: 1600mm Controlled axes: X-R axis (2x manual stop fingers) Rsdpsy A Nmlsfx Afnjt Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: - 4 or 5-axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS + light barrier system angle measuring system - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system - 2 sheet followers 36 months warranty after installation

Condition: new, Year of construction: 2026, machine/vehicle number: C12_2, functionality: fully functional, Electric press brake C12 with spindle drive CoastOne - Made in Finland New machine Pressing force: 52t Bending length: 1300mm Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: - 4 or 5-axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system Rodpfx Ajy A Nl Ijfnjt - Lazersafe IRIS + light barrier system angle measuring system - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system - 2 sheet followers 36 months warranty after installation

Condition: new, Year of construction: 2026, machine/vehicle number: G20_2, Electromechanical CNC press Manufacturer: CoastOne Oy Type: Cone G20 Pressing force: 600 kN Bending spindles: 3 Controlled axes: X-R axis (2x manual stop fingers) Standard Type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touch screen Options: - 4 or 5 axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS+ light barrier system angle measuring system - extra screen with 3D bending software - support table - Light front and rear - WILA / Trumpf / Type B - tool holder system - 2x bending aids 36 months warranty after installation Redjy A Nlzepfx Afnet

Condition: ready for operation (used), Year of construction: 1998, operating hours: 80,162 h, pressing force: 51 t, stroke length: 200 mm, controller manufacturer: AMADA, controller model: Operateur, number of axes: 8, This 8-axis AMADA HFBO 5020 press brake was manufactured in 1998. It features a bending length of 2090 mm and a press capacity of 500 kN. The machine includes a stroke of approximately 200 mm and an open height of around 480 mm. If you are looking to get high-quality bending capabilities, consider the AMADA HFBO 5020 press brake we have for sale. Contact us for further details. • Stroke: approx. 200 mm • CNC control: OP-2 CNC • Controlled axes: 8 (Y1, Y2, X1, X2, R1, R2, Z1, Z2) • Open height: approx. 480 mm • Throat depth (frame throat/gap): approx. 400 mm • Distance between uprights: approx. 1,665–1,690 mm • Table width (bottom beam width): 60 mm Redpfjy Alvpex Afnst • Working height (table height from floor): 910 mm • Max. hydraulic pressure: 270 bar • Number of cycles: 4 cycles/min (at nominal conditions) • Main motor power: 4.5 kW Technical Specification Bending Length 2090 mm

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 230, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, table width: 3,100 mm, table length: 10 mm, year of last overhaul: 2025, Amada hydraulic shear, 3100 mm cutting width, in very good condition, 20 hp, weight 7 t, stroke 190 mm. Rodpfxjy Ahpfo Afnjt

Condition: new, Year of construction: 2026, OSTERBERGER HTAP.Servo Brand new 3-axis CNC press brake equipped with CYBELEC CNC control system CybTouch8, featuring automatic bend angle calculation, bend sequence computation, and full-color graphical display. Maximum pressing force: 630 kN Maximum bending length: 2,000 mm / 2,500 mm / 3,200 mm Distance between side frames: 1,580 mm / 2,080 mm / 2,700 mm Throat depth in side frames: 250 mm Ram stroke: 100 mm Maximum installation height: 320 mm Ram travel speeds: - Down: 50/6 mm/sec - Up: 60 mm/sec Table width: 160 mm Oil tank capacity: 120 liters Redpfxey Afans Afnet Approximate dimensions: 2.6 / 3.1 / 3.6 m x 1.5 m x height 2.4 m Motor power: 5.5 kW Weight approx.: 4.8 / 5.5 / 6 t Two-axis precision back gauge - Adjustment range: 500 mm - R-axis: 90 mm Back gauge fingers glide on double linear guides Equipment: - Die block - Gooseneck bending punch - Quick-change upper tool system - 2 support arms on linear guides - Bending area lighting

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 4,500 h, stroke length: 200 mm, Hydraulic Press Brake Manufacturer: TRUMPF Model: TruBend 3066 B26 Year: 2017 As new, only 4,500 operating hours! Technical Data Rjdpfxsyz Smfo Afnot Manufacturer: TRUMPF Model: TruBend 3066 Year of manufacture: 2017 (B26) Bending length: 2040 mm Pressing force: 66 t Operating hours: 4,500h (read off) Clear distance between uprights: 2364 mm Throat depth: 400 mm Drive power: 17 kW Stroke: 200 mm Y-axis rapid traverse speed: max. 200 mm/s Y-axis working speed: max. 15 mm/s Dimensions: L 2587 x W 1644 x H 2370 mm Weight: 5650 kg Equipment - Electro-hydraulic top-drive - Block hydraulic system - Controlled axes: Y1, Y2, X, R - 3 backgauge fingers - TRUMPF upper and lower tool clamping system - Self-regulating crowning system - Control: Delem T3500T multi-touch control - Front light barrier BendGuard - Integrated TRUMPF technology data - Foot pedal - Tooling as per photo All information without guarantee. Machine demonstration under power is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 50 t, overall weight: 50,000 kg, working width: 2,500 mm, For sale is a GÉFI LE50/2500, Hungarian-made edge bender in excellent condition, in working condition, can be tested. Rjdpfx Afsyznhlenot Technical data of the pres brake : Manufacturer: GÉFI Type: LE 50/2500 Year of manufacture: 1983 Pressing force: 50 tons Maximum bending length: 2500 mm Dimensions: 2720x1550x2245 mm Weight: 5500 kg We are adding 1 1500 mm and 1 2500 mm knife, these need to be renovated.

Condition: excellent (used), Year of construction: 2015, Model Amada HFE MK2 5012 50 tons x 1250 , 4 axis CNC Press Brake Year 2015 Rsdsyym Hkspfx Afnot Tonnage 50 tonnes Max. Bend Length 1250 mm Stroke Length 150 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 55L Motor Power 6KW Weight 2550 Kg guarding Erwin Sick machine mounted light screen,side and rear interlocked fencing Dimensions Machine Length 2710 mm Machine Depth 2300 mm Machine Height 2300 mm Distance Between Side Frames 1035mm Beam width 60 mm Table height 960 mm Open Height 370 mm Throat Depth 100 mm

Condition: good (used), Year of construction: 2004, Used Safan E Brake press brake Type: E Brake 50 2050 HS TS1 Capacity: 2050 x 50 ton Rjdpsyykk Hefx Afnet WIla clamping with 1 set of tools TS1 CNC control Y1, Y2, X, R, Z1 and Z2 CNC controlled HS High Speed version

Condition: used, Year of construction: 2010, total length: 3,200 mm, total width: 1,800 mm, total height: 2,000 mm, Colour: White Weight: 4.500 kg - Year: 2010 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 7121/13220 - Drive system: Conventional - Power [kW]: 4.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 63 - Max. working width [mm]: 2550 - Max. stroke [mm]: 102 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Additional finger stop - Transport dimensions: 3200mm x 1800mm x 2000mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 1 Rjdoywuzdspfx Afnjt Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2022, machine/vehicle number: P 710, functionality: fully functional, power: 5.5 kW (7.48 HP), oil tank capacity: 120 l, overall weight: 6,500 kg, control type: CNC control, Machine is in as-new condition. The High Quality Press Brake (HQPB) represents the top model of the Placke range of press brakes. The entire manufacturing process, from hydraulic cylinders to control cabinet assembly, is performed in-house. By combining state-of-the-art technology with many years of expertise in forming technology, the HQPB series enables precision bending at the highest level. Even the standard configuration provides a fully functional press brake. This package of safety, reliability and efficiency, together with user-friendly operation, allows us to meet the highest demands and tolerances in the bending process. Machine Frame: - Base machine constructed from S 355 N steel - Side supports with 2 pressure pipes and an overhead oil tank, welded - Above-floor design - Coating (2-component structured lacquer), light grey (RAL 7035) and signal grey (RAL 7004) Upper Beam: - Press beam stress-relief annealed - Depth of stroke measurement, reading head guided by ball bearing rails - Separate Y1 and Y2 control, electronic monitoring of parallelism Hydraulic System: - Hydraulic proportional control valve with electronically monitored cylinder synchronization - Solid steel cylinders with inductively hardened piston rod - Low-noise internal gear pump Punch Clamping: - Upper tool holder system WILA, hydraulic clamping system, Type NSCL-II-HC, fully hardened, Maximum load: head bearing = 250 t/m, shoulder bearing = 300 t/m Lower Beam: Rodjyvzkiopfx Afnst - Narrow table incl. manual clamping strip, dimensions: 48 mm high, 70 mm wide - Reinforced lower beam. Mechanical crowning compensation is structurally unnecessary. - Single V-die holder (13x20) - Working height: 1050 mm (with 55 mm die height) Front Side of Machine: 2 aluminum support arms at the front, approx. 600 mm long, incl. 2 flip stops, measuring tape, and plastic wear strip. The support arms are adjustable via ball guides and height-adjustable from 55 mm to 100 mm die height using a slotted adjustment. The ball guide is milled into the lower beam. Control and Regulation Technology: - Operating voltage 400V / 3Ph / 50Hz - Switching and safety components by Telemecanique - Backgauge with AC servo technology - Pilz safety PLC Backgauge “2-axis control”: - X and R axes CNC-controlled - Z-axis manual Delem DA 66 Touch control panel on swivel arm. Safety devices in accordance with CE standard Technical Data and Working Range: Press force: 600 kN Working length: 1550 mm Distance between frames: 1200 mm Installation height: 400 mm Throat depth: 255 mm Ram stroke: 215 mm Ram Speeds: Rapid approach max. 280 mm/s Press speed max. 9.8 mm/s Return speed max. 170 mm/s Ram positioning accuracy: ± 0.01 mm Ram tilt: ± 10 mm Electronically limited to ± 5 mm Lower beam height above floor: 947 mm Motor power: 5.5 kW Main dimensions: Below-floor depth: 0 mm Pit depth for side frames: 0 mm Machine weight: approx. 6.5 t Tank capacity (hydraulic oil): 120 l (Specifications subject to change) Rear machine lighting: Work area illumination via LED light strip in the area between the side frames.

Condition: good (used), functionality: fully functional, Press brake AMADA HFP220-4S Type: HFP Number of axes: 8 Touchscreen CNC: AMNC Backgauge stroke: 680 mm Rodpfxsytb Rcj Afnjt Working speed: 200 mm/sec Safety light barrier Sold without tooling Machine is fully functional

Condition: used, Year of construction: 1992, Press Brake Manufacturer: Beyeler Model: Euro III 60x2050 Year of manufacture: 1992 Press force: 60 t Bending width: 2,050 mm Rated current: 16 A Machine weight: approx. 4,600 kg Equipment Comprehensive tool assortment Various upper and lower tools Rsdpfx Asyni H Usfnst Operational and immediately ready for use Machine is fully functional ä16426

Condition: good (used), working width: 2,500 mm, bending force (max.): 60 t, Max. pressing force 60 tons Total working width 2500 mm Working width between columns 2050 mm Throat depth 210 mm Rodpfxoymguyo Afnst Transport dimensions: length 260 cm width 120 cm height 210 cm weight approx. 4 t Note: The information on this page has been obtained and assembled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we advise you to verify all relevant details. Financial information VAT/margin: Margin: The displayed price includes VAT (VAT not deductible for business customers)

Condition: good (used), Year of construction: 2002, working width: 3,000 mm, bending force (max.): 70 t, control type: manual, LVD PPN 70/30 press brake Max. press force: 70 tons Total working width: 3000 mm Working width between uprights: 2550 mm Throat depth: 210 mm Transport dimensions: length: 380 cm width: 180 cm height: 230 cm weight: approx. 6 t Please note: The information on this page has been compiled to the best of our knowledge and belief, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend that you verify all relevant details. Rjdpfx Afoymgr Esnet Financial information VAT/margin: VAT: The listed price is excluding VAT (VAT is deductible for businesses)

Condition: used, pressure 60T t chamfer lenght 2000 mm distance between columns / mm height of stroke / mm Redpfeylz Dyjx Afnet work feed / mm/s control / total power requirement / kW weight of the machine ca. / t

Condition: used, Year of construction: 1995, pressure 60T t chamfer lenght 2000 mm distance between columns 1640 mm height of stroke 325 mm work feed 15 mm/s control SOMABEND total power requirement 12,5 kW Rjdpfjyk Ikdex Afnet weight of the machine ca. 4,3 t Serial No: 22161