ATQ s.r.o.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: WT 1104, total height: 3,421 mm, total width: 4,704 mm, total length: 9,550 mm, load capacity: 200 kg, construction height: 3,421 mm, Vacuum Turning Portal for Panels The turning unit offers two different "automatic" operating modes: I. Component is conveyed without rotation The component is only shifted laterally, aligned to the reference edge (zero line) of the machining center, and then fed further to the CNC machining center (BAZ). II. Component is conveyed with rotation The component is shifted laterally and rotated along its longitudinal axis before being fed further to the CNC machining center. Each function can also be manually controlled in "manual" mode. SPECIFICATIONS: Dedsyta R Uepfx Adysup Max. panel dimensions: LWH: 8000mm x 2500mm x 100mm Max. weight: 200kg Min. panel dimensions: LWH: 1500mm x 1500mm x 12mm The turning portal is equipped with a total of 24 vacuum suction cups, ensuring gentle handling of the panels. The panels are always lifted via suction, then either moved horizontally to the zero line of the machining center or additionally rotated 180° en route before being delivered to the reference edge. The rotational movement is monitored via absolute encoders; the lateral positioning is controlled by adjustable photoelectric sensors. Vacuum is generated by a blower. The roller table, measuring 8500 mm x 4300 mm with roller diameter 108 mm, is fitted with material-friendly rubber rings and is driven by a SEW gear motor. Control of the roller table is via frequency inverter, adjustable speed up to 45 m/min. GENERAL INFORMATION: The entire area is enclosed by fencing; the longitudinal side of the system is secured by two sliding doors, which are safety-monitored. An operator touchpanel (12") is integrated into the fence area. The installed PLC (Siemens S7-1500) is programmed with three modes: • Automatic operation • Manual operation • Maintenance operation Input signals, loading side: – Start roller table – Rotate yes/no – EMERGENCY STOP complete system Input signals, unloading side: – Start roller table – EMERGENCY STOP complete system System output signals: – EMERGENCY STOP complete system – Panel infeed confirmed

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: matricola 1853594, total height: 3,200 mm, total width: 1,200 mm, total length: 2,400 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 860 kg, load capacity: 25 kg, Manipulator with rigid arms, never used, like new (new value € 15,000) – max. operating radius 2,500 mm – vertical stroke 1,900 mm – max. lifting speed 0.5 m/s – voltage 400 V 50Hz – video available Dedpfeynlq Asx Adyjup

Condition: like new (used), arm lifting capacity 120 kg, length 370 + 240 cm Dusdjynhz Djpfx Adysp air suction cup lifting capacity 120 kg MANUT Siemens pump motor power 3 kW base length 365 cm

Condition: like new (used), Arm lifting capacity 120 kg, length 600 cm Duodpfx Aoynhvnedyop Vacuum suction cup, lifting capacity 120 kg MANUT, year 2006 Siemens pump motor power 3 kW Base length 365 cm

Condition: used, machine/vehicle number: Nr. 84064. Nr. 86016 Nr. 82013, 3 winding machines, 4-fold flyer Winding diameter: 40 mm, laying width: 150 mm Max. wire diameter: 1.0 mm Dsdeylzurjpfx Adyeup HKW 2/7 no. 82013, 4-fold reversing bar Tool EI 84/20/5

Condition: used, machine/vehicle number: 85252. und 85122, Coil winding machine Aumann WG 85253 Winding diameter 160 mm, laying width 550 mm Wire guide DF 50 No. 85099 defective Duedpfx Adeylztuoyjp Coil winding machine Aumann PW 85122 Winding diameter 100 mm, laying width 200 mm Wire guide DF 70 No. 85115

Condition: used, machine/vehicle number: 423. 1245102, 4-strand flyer with reversing beam Wire diameter: 0.05 to 1.0 mm 2-strand flyer with reversing beam Winding diameter: 90 mm, traverse width: 120 mm Max. wire diameter: 1.0 mm Dodpjylzlkefx Adyjup

Condition: new, Year of construction: 2023, New ManutLM manipulator available due to order cancellation – see description. New price: €27,000.00 excl. VAT; OFFER: €15,000.00. Never installed, still in crate. Dedsylv Rbspfx Adysup

Condition: ready for operation (used), Year of construction: 2006, Two vacuum manipulators Dalmec for the window construction industry are available. Reach: 2800mm, working range: 300mm-1800mm, load capacity: 140kg, min. ceiling height: 6000mm, weight: approx. 350kg, cycle counter: 78191. Documentation available. An on-site inspection is possible. Dodpfx Adjykbfusyoup

Condition: used, We offer for sale manipulators (new) as well as used single axes, accessories, and wiring. Dusdpfx Adoyc Rv Tsyop Delivery term: EXW Trstena Minimum order value: €5,000

Condition: used, Year of construction: 2017, Manufacturer: Manut LM Model : MAN Year: 2017 Body type : Vacuum Tube Manipulator Application : Handling of bags and boxes Maximum load : 30 kg Classification: ATEX Dsdox R A Nvepfx Adyjup Vacuum pump : Becker SV 8 400/2 Dimensions : see photo drawing.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 332113-01-01, overall weight: 172 kg, maximum load weight: 70 kg, Equipment: CE marking, Manipulator for furniture racks. Device facilitating the lifting of finished cabinet furniture components. Dujdpfxoxz Dw Tj Adyop

Condition: used, Year of construction: 2000, 2 Schmalz vacuum lifters, year of manufacture 2000 The lifting devices were stored in working condition but are no longer needed. Duodpoxxv Eqofx Adyep The smaller unit has a lifting capacity of 500 kg, the larger one 2,000 kg. The price is per unit. Only the vacuum lifters are being offered, not the other items visible in the photos (such as tires, pallets, trolleys, metal buckets, etc.). Collection in Bremen. _____ Our terms and conditions apply; furthermore, the seller is not liable for typographical or data transmission errors. The appearance of the items offered corresponds to their age and the images provided. The technology and wear of the items offered are consistent with their age. Used machines are sold exclusively to commercial buyers and without any warranty.

Condition: like new (used), Year of construction: 2017, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 1750851, load capacity: 100 kg, Dalmec manipulator with vacuum generator and column. Dismantled from an unused production line, perfect condition. Tested, fully functional, practically new. Working range: 2,530 mm Vertical lift: min. 950 mm, max. 1,850 mm (lower edge of flange) Load capacity: max. 100 kg Dsdoxxbczspfx Adyjup Manipulator weight: 450 kg + column Our company can arrange professional transport and commissioning if you need. Feel free to call us for more details. (English is preferred). The indicated price is for 1 unit. (3 units available.)

Condition: new, Year of construction: 2026, Vacuum lifter for glass GLASS SYSTEM DS600C Device dedicated for window production and narrow glazing Lifter features • Equipped with suction pad covers. • Individual adjustment of each suction pad on the Y-axis • Manual control – vacuum suction/release • Smooth manual rotation around its own axis by 45 degrees • Smooth adjustment from vertical to horizontal position • Easy suction pad configuration without tools • Power supply: 230V Duedpsxqfwyefx Adysp • Own weight: approx. 80 kg • Lifting capacity: 200 kg • 3 suction pads Ø 250 • CE certified

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 4,000 mm, overall weight: 820 kg, load capacity: 500 kg, The offer concerns the following set: (possibility to adjust device parameters or to purchase the vacuum lifter or jib crane separately) - Vacuum lifter for boards, suitable for handling MDF, laminated boards, raw boards, particle boards, etc. (model WOOD SYSTEM DS 250) Djdpfx Adoxln Drsysup - Stationary jib crane - Electric chain hoist - Manual trolley Features of the WOOD SYSTEM DS 250 vacuum lifter: - Designed for handling boards - Actuator for rotation between vertical and horizontal positions - 6 suction cups Ø 200 mm - Frame allows for adjustment of suction cup positioning to match the material being handled - Beam length: 2500 mm - Each suction cup is equipped with a ball valve for individual deactivation - Integrated air pulse function to prevent material adhesion - Individual X and Y axis adjustment for each suction cup - Control from the operating console (control panel): - Power on/off for the generator - Vacuum engagement/release - Thumb-operated control of the electric hoist – raising/lowering the lifter - Pressure gauge - Pneumatic supply – equipped with vacuum generators - Lifting capacity: 400 kg - Device weight: 100 kg - CE certificate Stationary jib crane Technical data: • Column height: 4 m • Height under the jib: 3 m • Jib length: 4 m • Lifting capacity: 400 kg • Slewing range: 270 degrees • Lifting speed: approx. 3 m/min • Colour: any RAL palette colour on request • Manual slewing • Manual trolley • Quadruple/double needle bearing on the jib arm for smooth rotation • Electric chain hoist • CE certificate INCLUDED IN THE PRICE: • Pillar jib crane • Electric hoist – single phase • Manual trolley • CE certification • Complete documentation Standard warranty: 12 months

Condition: good (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, total height: 4,820 mm, total width: 15,000 mm, total length: 20,000 mm, type of input current: AC, input voltage: 400 V, SOCO SYSTEM End-of-Line Packaging Line with Robotic Palletizer, Carton Erectors & Sealers (Year of manufacture: 2020) This offer includes our complete SOCO SYSTEM shipping and end-of-line packaging line, exactly as installed in our facility. The system is fully operational, well-maintained, and was used until recently for pallet dispatch. This line is ideal for companies with high shipping or packaging volumes that value automated, efficient, and modular packaging processes. The system can be taken over in full or in part – we are happy to advise you on the optimal configuration. Technical Equipment / Components - 2 x Carton Erectors BE-2300 ATS and BE-2200 ATS Automatic carton erectors for folding and sealing bottom flaps (self-adhesive tape, width = 50 mm). - Long Flap Spreader For precise feeding and alignment of cartons onto the main conveyor line. - Powered Conveyors & Labelling Sections Roller conveyors, curves, and distribution lines with integrated label transport. - Carton Sealer T-4000 with Tape Alarm Automated top carton sealing with self-adhesive tape. - Labeller LOGOPAK Logomatik 415-T (integration ready) Transfers cartons for automatic labelling and verification via scanner. - Palletizing Robot SOCO PRS-LRS-1218-H3 Industrial robot for fully automated palletizing according to customer-specific patterns. - Pallet magazine for 14 pallets Automatic provision of empty pallets. - Safety Features: Swing doors / light curtains, emergency stop interlinking, Type 2 control, controller, CE certification. - Additional Modules: T-55 with conveyor system and ball table, F-100 + T-2000 conveyor system, RAL 9006 special colour. Complete assembly, factory testing, installation, and commissioning included (original system price according to SOCO SYSTEM offer: €243,700). Function Description The line automatically erects cartons, seals the bottoms, conveys them on the main packaging conveyor, closes and seals the tops, labels and inspects them. Error-free cartons are then picked up by the robotic palletizer and stacked according to defined pallet layouts. The entire system is modular and can be integrated into existing production or shipping operations. General Information Year of manufacture: 2020 Manufacturer: SOCO SYSTEM A/S Condition: used / very good / immediately operational Location: Norderstedt (near Hamburg) Scope of delivery: complete shipping line including robot, sealer, and conveyor technology. Dodpfxsxdb Sae Adyeup

Condition: new, Year of construction: 2025, This handling device is suitable for safely and stably handling large-area materials with just one operator. The device can be provided as an independent unit to any machine. The price-performance ratio is impressive, as the payback period is less than one year. Comprises the following main components (also available individually): Dusdpow Nh Dzsfx Adyjp • Column stand • Pivot arm • Lifting traverse with controls Technical data VT 1000: Lifting capacity: 1000 kg Max. lifting height: 1295 mm Lifting speed: 4 and 8 m/min Max. rotation radius: 3900 mm Power supply: 400 V / 50 Hz Max. product dimensions: 4000 x 2000 mm² (weight dependent) Overall height: 2990 mm Total weight: 1350 kg Alternatively, we also offer this handling device with a lifting capacity of 500 kg.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,619 h, functionality: fully functional, machine/vehicle number: PEC 50 2158273, total height: 3,000 mm, total width: 1,000 mm, total length: 1,000 mm, type of input current: three-phase, input voltage: 400 V, Arm-mounted manipulator with a gripper for cylindrical parts. Dodpfow Hwq Tex Adysup

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, overall weight: 110 kg, Vacuum Lifter GLASS SYSTEM DS600 L Vacuum lifter for installation of large glass panes, shopfronts, and for glass transport. Thanks to its design, it allows for the installation of long, narrow panes as well as standard sizes. Specification: LIFTING CAPACITY – 450 kg CONTROL – radio remote control POWER SUPPLY – battery powered (up to 12 hours operation) BATTERY CHARGE INDICATOR – yes VERTICAL-HORIZONTAL ROTATION – yes Dsdpfx Adsw Hq I Eeysup AXIAL ROTATION – yes NUMBER OF SUCTION PADS – 4 NUMBER OF ARMS — HST GLASS LIFTING CAPABILITY – no GLASS SIZE – min. 0.3 x 1.5 m, max. 3 x 4.5 m NUMBER OF CIRCUITS – 2 ACTUATOR FOR ROTATION OPTION – yes MACHINE WEIGHT – 110 kg Lifting capacity can be increased to 650 kg and additional suction pads can be supplied at extra cost. Machine customization to individual requirements and purchase with a crane are available. Check our offer or contact us – we will surely find a solution tailored to your company’s needs!

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, overall weight: 62 kg, Vacuum lifter designed for handling black steel, stainless steel, and other sheet metal. The device can be optionally equipped with a compressed air impulse system for easy sheet release. It is compatible with all types of cranes and overhead hoists. Sample specification: Lifting capacity – 600 kg Power supply – Permanent 230V Working position – Horizontal Number of suction cups – DS.250-8 Minimum working area dimensions – 0.6m x 0.4m Maximum working area dimensions – 1.5m x 3.0m Duodew Elttepfx Adyep Compressed air impulse – Optional upgrade Device weight – 62 kg The listed price applies to the machine with the above parameters. Custom configuration – available upon request.

Condition: good (used), overall weight: 280 kg, FANUC positioner. manufactured in 2012. tested and serviced. collection only Dsdpfx Aowzk Syedyjup

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 600, overall weight: 60 kg, warranty duration: 12 months, GLASS SYSTEM DS600 MINI VACUUM LIFTER For facade installation, glass window assembly, and glass transportation. Device size optimized for operation between façades and scaffolding. Technical specifications Lifting capacity: Maximum lifting capacity: 350 kg Control system: Radio remote control (remote range up to 200 m) Battery charge indicator: Yes Power supply: Battery-powered, up to 12 hours of operation Construction: Number of suction cups: 4 Number of circuits: 1 Number of arms: — Device weight: 60 kg Movement capabilities: Vertical/horizontal rotation: No Rotation around own axis: No Option to use rotation actuator: No Supported material dimensions: Dusdswzafpjpfx Adyep Minimum: 0.8 x 0.8 m Maximum: 2.5 x 2.5 m Ability to lift HST glazing: No Compatibility: For use with cranes and HDS (truck-mounted cranes) Flexible device configuration – can be tailored to individual customer needs

Condition: ready for operation (used), Year of construction: 2019, A conveyor belt is available for buffering and transferring PCBs between processing systems. Transport height: 870mm-970mm, max. transport width: 460mm, min. PCB dimensions X/Y: 70mm/50mm, max. PCB dimensions X/Y: 460mm/460mm, PCB thickness: 0.5mm-4.5mm, max. PCB weight: 3kg. Machine dimensions X/Y/Z: approx. 1590mm/800mm/925mm, weight: approx. 170kg. Documentation available. On-site inspection is possible. Djdpfxewwvvve Adysup

Condition: excellent (used), Year of construction: 2005, Industrial manipulators (2 units) Mounting: ceiling-mounted Ceiling guide length: approx. 15 meters Number of axes: 4 Load capacity: Manipulator 1: 30 kg Manipulator 2: 35 kg Dujdpjwvi Upofx Adyjp Gripper: pneumatic part gripper (for each manipulator) Year of manufacture: 2005