FEMIS d.o.o.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10670 Manufacturer: STARRAG HECKERT Type: CWK 500 D Year of construction: 2002 Type of control: CNC Control: HEIDENHAIN TNC 426 Storage location: Halberstadt Tsdpfx Aj Ahky Eekied Country of origin: Germany X-Travel: 750 mm Y-Travel: 750 mm Z-Travel: 700 mm Max. Tool Weight: 10 kg Max. Tool Length: 400 mm Max. Tool Diameter: 160 mm Max. Size Of Workpiece Lxwxh: 85 mm Tool Piece Magazine With: 80 Pcs./pcs. Spindle taper: HSK63 Spindle Speed: 15.000 RPM Max. Torque: 350 Nm axes: 4 Rapid Traverse: 40 m / min Internal cooling: 50 bar Numbers Of Pallets: 2 Max pallet load: 500 kg Size Of Pallet: 500 x 500 mm pallet change time: 9 s Machine width: 4000 mm Machine Height: 3300 mm Weight Of The Machine Ca.: 15 t Further information: The machine is currently in active production and can be inspected under power and in operation by prior arrangement.

Condition: good (used), Year of construction: 2005, Ref. -No.: 10669 Manufacturer: STARRAG HECKERT Type: CWK 400D Year of construction: 2005 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 625 mm Y-Travel: 650 mm Z-Travel: 650 mm Max. Tool Weight: 10 kg Max. Tool Length: 350 mm Max. Tool Diameter: 80 mm Tool Taper: HSK-A63 nach DIN 69893 Numbers Of Tools In Magazin: 60 Spindle Turning Speed - Stepless: 50-10.000 RPM Numbers Of Pallets: 2 Max pallet load: 400 kg Size Of Pallet: 500 x 400 mm pallet change time: 8/5 s coolant reservoir: 1100 L. Machine length: 5800 mm Machine width: 4800 mm Weight Of The Machine Ca.: 12,8 t Spindle power: 24 / 37 kW Further information: Equipment Pallet changer Chain-type tool magazine with 60 tool positions KNOLL coolant system with fleece filter Internal and external emulsion cooling Renishaw probing system Tool breakage detection in the tool magazine Chip conveyor Sound shower (noise reduction system) Paper band filter Coolant gun at the setup station Fully enclosed working area in accordance with safety regulations Automatic pallet sequence operation Network connection Ethernet interface Tjdpfxe Ahkyzs Akijd Technical documentation Installation layout / foundation plan The machine is currently in active production and can be inspected under power and in operation by prior arrangement

Condition: good (used), Year of construction: 2011, Ref. -No.: 10668 Manufacturer: HELLER Type: H6000 Year of construction: 2011 Type of control: CNC Control: Siemens 840D solution line Storage location: Halberstadt Country of origin: Germany X-Travel: 1.000 mm Y-Travel: 1.000 mm Z-Travel: 1.000 mm Tool Taper: HSK-A100 nach DIN 69893 Numbers Of Tools In Magazin: 50 Turning Speeds: 8.000 RPM Max. Workpiece height: 1200 mm Spindle Speed: 8000 RPM Max. Torque: 822 Nm Feed Speeds X/Y/Z Axis: 1-50.000 mm / min Rapid Traverse: 50.000 m / min Todpfx Ae Ahkywskiod Drive Capacity - Spindle Motor: 43 kW Internal cooling: 70 bar Rapid Traverse: 50000 mm / min nominal voltage: 400 V frequency: 50 Hz Speed range - main spindle: 8000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 × 630 mm pallet change time: 13 s Further information: Additional Equipment / Optional Features 5-port media interface for workpiece clamping (60 bar hydraulic pressure) Additional 630 × 630 mm pallet Fast drill breakage detection Comfort operator terminal at the tool setup station KNOLL paper band filtration system High-pressure coolant system (70 bar through-spindle coolant) Working area flushing system Air blow-off system for the operator door window Integrated tool monitoring system Collision monitoring system to minimize machine damage Handheld control unit including interface SK50 high-performance milling spindle Production Data Acquisition System (PDA/BDE) Workpiece clamping via media coupling, 60 bar Included Features SIEMENS 840D Solution Line CNC control SK50 high-performance milling spindle Dual pallet changer 70 bar through-spindle coolant system KNOLL filtration unit Tool breakage monitoring Collision monitoring Production data acquisition (PDA/BDE) Additional pallet Workpiece clamping via 60 bar media coupling The machine is currently in active production and can be inspected under power and in operation by prior arrangement.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10666 Manufacturer: GLEASON - PFAUTER Type: P 1600 / 2000 S Year of construction: 2008 Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany Machine length: 6900 mm Machine width: 8400 mm Machine Height: 3700 mm Max. Wheel Diameter: 2000 mm Gear Width: 700 mm Weight Of The Machine Ca.: 35 t Tedpfxj Ahkyto Akiod Further information: The machine is currently in active production and can be inspected under power and in operation by prior arrangement

Condition: good (used), Year of construction: 2003, Ref. -No.: 10663 Manufacturer: UNION Type: PCR 150 Year of construction: 2003 Type of control: CNC Control: Sinumerik 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 6000 mm Y-Travel: 3000 mm Z-Travel: 1000 mm W-Axis: 700 mm V-axis: 1500 mm B-Axis: 360 ° Bore Spindle Diameter: 150 mm Number of gear stages: 2 Max. Tool Weight: 30 kg Max. Tool Length: 500 mm Workpiece Diameter At Full Load: 125 mm Workpiece Diameter With 2 Vacant Positions: 250 mm Turning Speeds: 2800 RPM Max. Torque On The Boring Spindle: 1751 Nm Max. Torque: 2415 Nm Rapid Traverse X-Axis: 15 m / min Rapid Travel Y-Axis: 15 m / min Rapid Traverse Z-Axis: 15 m / min Rapid Traverse (W-Axis): 15 m / min Table surface: 2000 x 2500 mm Further information: The machine is currently in active production and can be inspected under power and in operation by prior arrangement. Tsds Ahkypepfx Akied UNION PCR 150 CNC 840 D – horizontal boring and milling machine (floor type) with rotary/traversing table DV 20 Control: Siemens Sinumerik 840D Travels: - X-axis (cross): 6,000 mm - Y-axis (vertical): 3,000 mm - Z-axis (ram): 1,000 mm - W-axis (boring spindle): 700 mm - V-axis (table longitudinal): 1,500 mm - B-axis (table rotation): 360° Main spindle: - Boring spindle diameter: 150 mm - Gear steps: 2 - Speed range: 5 – 2,800 rpm - Drive power: 37 kW (S1) / 51 kW (S2, 30 min) - Torque: 1,751 Nm (S1) / 2,415 Nm (S2) Feeds: - Feed X, Y, Z, W: 1 – 6,000 mm/min - Rapid traverse: 15 m/min - Feed force: 25 kN Tool changer: - Chain magazine with 60 pockets - Max. tool diameter: 125 mm (250 mm with free adjacent pockets) - Max. tool length: 500 mm, max. tool weight: 30 kg Rotary/traversing table DV 20: - Clamping surface: 2,000 x 2,500 mm - Max. table load: 20,000 kg - T-slots: 28 mm, spacing 160 mm Floor plate: 2,000 x 2,500 x 300 mm, T-slots 36 mm Accuracy (VDI/DGQ 3441): - Positioning uncertainty: 0.020 mm (up to 5,000 mm) - Repeatability: ± 0.003 mm Connection: 90 kVA, 400 V / 50 Hz, compressed air 6 bar Documentation, foundation and installation plans available.

Condition: good (used), Year of construction: 1998, Ref. -No.: 10661 Manufacturer: MAZAK Type: SQT 200 MS Year of construction: 1998 Type of control: CNC Control: Mazatrol Fusion 640T Storage location: Halberstadt Country of origin: Japan Turning Speeds: 6000 RPM Swing Dia.: 525 mm Turning Diameter: 300 mm Turning Length: 500 mm Spindle Speeds: 5000 RPM Spindle Bore: 51 mm Spindle power: 18,5 kW Turret places: 1 Pcs Tool places: 12 Machine length: 3023 mm Machine width: 1700 mm Todo Ahkyljpfx Akied Machine Height: 1999 mm Weight Of The Machine Ca.: 5,3 t Pole work up to max.: 51 mm Further information: - The Mazak SQT 200 MS is built for durability and reliability - Its design ensures stability and precision during machining, even at high speeds or during long production runs. - This model features powered tools and C-axis capabilities - This model is typically equipped with the Mazatrol Fusion 640T CNC control. The machine can be viewed while powered on by appointment.

Condition: good (used), Year of construction: 1973, Ref. -No.: 10658 Manufacturer: SCHARMANN Type: Opticut FB 140 Year of construction: 1973 Type of control: CNC Control: Heidenhain Storage location: Halberstadt Country of origin: Germany Machine-No.: 162XXX X-Travel: 3.000 mm Y-Travel: 2.000 mm Z-Travel: 1.250 mm Spindle Diameter: 140 mm Spindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1800 x 1500 mm Table Load: 15000 kg Turning Speeds: 2,3 - 810 RPM Spindle stroke: max.800 mm Total Power Requirement: 30 kW Table size: 2.000 x 1.500 mm Machine length: 7300 mm Machine width: 5600 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 31 t Further information: Tedpfx Ao Ahkyhjkijd - Faceplate with NC face slider and NC rotary table - Heidenhain digital readout - Various tool holders - Various clamping devices The machine can be viewed while powered on by prior arrangement.

Condition: good (used), Year of construction: 2006, Ref. -No.: 10651 Manufacturer: CHIRON Type: Mill 2000 Year of construction: 2006 Type of control: CNC Control: SIEMENS SINUMERIK 840 D - Safety Integrated Storage location: Halberstadt Country of origin: Germany Machine-No.: 498-XX X-Travel: 2000 mm Y-Travel: 500 mm Z-Travel: 640 mm Total Power Requirement: 29 kW Weight Of The Machine Ca.: 9,6 t Further information: 3-axis machining center equipped with a Siemens CNC control system and a 40-position tool magazine. The machine allows pendulum operation on two separate machining areas. Tool Interface: SK40 Working Area: X-axis: 2,000 mm (can be divided into 2 × 850 mm) Y-axis: 500 mm Z-axis: 640 mm Equipment: Screw chip conveyor with discharge to the left side Stand-alone Knoll coolant system for tool coolant supply and machine sump flushing The machine can be inspected under power. Tjdpj Ahkyaofx Akiod

Condition: good (used), Year of construction: 2026, Ref. -No.: 10648 Manufacturer: HAITIAN Type: V10 Year of construction: 2026 Type of control: CNC Control: FANUC 0i-MF Storage location: Halberstadt Country of origin: China X-Travel: 1000 mm Y-Travel: 600 mm Z-Travel: 600 mm Spindle Taper: SK 40 Table Dimensions (Lengthxwidth): 1200 x 600 mm Table Load: 800 kg Max. Tool Weight: 8 kg Max. Tool Length: 300 mm Max. Tool Diameter: 80 mm Numbers Of Tools In Magazin: 24 Turning Speeds: 8000 RPM Rapid Traverse X-Axis: 36 m / min Rapid Travel Y-Axis: 36 m / min Rapid Traverse Z-Axis: 36 m / min Distance between spindle nose and table: 150 - 750 mm Machine length: 2800 mm Machine width: 3550 mm Machine Height: 2700 mm Weight Of The Machine Ca.: 6,5 t Tool-tool change time: 2,5 sec Feed rate X-axis: 15 m / min Feed rate Y-axis: 15 m / min Z-axis feed rate: 15 m / min Positioning accuracy: 0,008 / 0,006 / 0,006 X/Y/Z Repeatability: 0,005 / 0,004 / 0,004 X/Y/Z T-slot in the table: 5 x 18 x 100 mm Further information: - Documentation / Manual - Steplessly adjustable spindle speed - Chip conveyor - Drive type: Belt drive - Pull stud: MAS P40T-I (45°) - Power supply: 30 kVA - Pneumatic and hydraulic lubrication system - Coolant system - Internal coolant tank with chip conveyor Tedpfe Ahkx Sex Akied - Full enclosure - Air gun - 3-color signal tower light - Standard accessories - Chip trolley This is a brand-new machine available at short notice, with a wide range of customization options to meet individual customer requirements. Various control systems, including FANUC, HEIDENHAIN, and Siemens, as well as different spindle configurations and a wide range of additional equipment options, are available. This allows the machine to be tailored to specific production requirements and machining applications.

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Tjdpfxo Ahkx Ie Akisd Table size: 1800 x 2200 mm Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment.

Condition: good (used), Year of construction: 2022, Ref. -No.: 10631 Manufacturer: DECKEL MAHO Type: 160 U duoblock Year of construction: 2022 Type of control: CNC-Steuerung Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Germany X-Travel: 1600 mm Tjdo Ahkx Djpfx Akisd Y-Travel: 1400 mm Z-Travel: 1100 mm B-Axis: 210 ° C-Axis: 360 ° Table Load: 3000 kg Max. Workpiece Weight: 3500 kg Max. Tool Weight: 15 kg Max. Tool Length: 650 mm Max. Tool Diameter: 110 mm Clamping Area: Ø 1400 mm Tool Taper: SK 50 Numbers Of Tools In Magazin: 240 Turning Speeds: 2300 RPM Spindle Turning Speed - Stepless: 20 - 10.000 RPM Max. Torque: 14840 Nm Feed Speeds X/Y/Z Axis: 60000 mm / min Metric thread feeds: Ø 100 mm Rapid Travel X/Y/Z: 60 mm / min Drive Capacity - Spindle Motor: 100% ED 25,00 kW Weight Of The Machine Ca.: 55 t Dimensions Of The Machine Ca.: 12,5 x m Spindle speed gear stage 1: min Spindle speed gear stage 2: min Holding torque: 14840 Nm Max. rotation of the table top: 15 rpm Feed: 5400 °/min. Resolution of the measuring system: 0,001 ° Further information: - Coolant system 980 l - Platform - Electronic handwheel - Operating mode 4 - 4-fold pallet storage system - TS641 measuring probe - BLUM laser - Coolant system - Coolant through the spindle - Chip conveyor The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10629 Manufacturer: MICHAEL DECKEL Type: S20 Turbo Year of construction: 2004 Type of control: CNC-Steuerung Storage location: Halberstadt Tsdj Ahkxyjpfx Akied Country of origin: Germany Workpiece Diameter: 250 mm Max. Grinding length: 340 mm Max. Workpiece Weight: 50 kg Grinding wheel diameter (max.): 150 mm Turning Speeds: 8000 RPM Workpiece holder: SK 50 Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10621 Manufacturer: PAMA Type: Speedmat 3/TR16 Year of construction: 2008 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840 D PL Storage location: Halberstadt Tedps Ahkxvefx Akiod Country of origin: Italy X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 2200 mm W-Axis: 800 mm Bore Spindle Diameter: 160 mm Table Load: 12000 kg Tool Taper: ISO 50 BIG PLUS Turning Speeds: 3500 RPM Max. Torque: 2.765 Nm Rapid Travel X/Y/Z: 25000 mm / min Drive Capacity - Spindle Motor: 46 kW Internal cooling: 15 / 45 bar External cooling: 50 / 4 bar Table surface: 1600 x 2000 mm Spindle speed gear stage 1: 2.120 1 / min Spindle speed gear stage 2: 2.765 1 / min Further information: Automatic tool changer SK50 DIN 69871, 80 positions. Automatic angle milling head TS 35 with 360 positions, speed 2,000 rpm and torque 2,000 Nm. Automatic universal milling head TU25C (2-axis), speed 3,000 rpm and torque 800 Nm. Automatic accessory changer, 2+1 units. Touch probe (Renishaw). The machine can be inspected under power.

Condition: good (used), Year of construction: 2003, Ref. -No.: 10618 Manufacturer: KELLENBERGER Type: 600 U Nr. 33 Year of construction: 2003 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Teds Ahkxcepfx Akisd Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Tedpo Ahkw Hofx Akied Type of control: CNC-Steuerung Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10604 Manufacturer: UNION Type: TC 110 Year of construction: 2004 Type of control: CNC-Steuerung Control: SINUMERIK 840 D Powerline Storage location: Halberstadt Tedpfxs Ahkwus Akiod Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1250 mm Z-Travel: 1000 mm W-Axis: 550 mm Table Height: 1050 mm Spindle Diameter: 110 mm Table Dimensions (Lengthxwidth): 1600 x 1250 mm Number of T-slots: 10 Max. Workpiece Weight: 6000 kg Clamping Area: 1250 mm T - groove width: 22 mm T - slot spacing: 125 mm Tool Taper: ISO 50 Max. Torque: 1639 Nm Feed Speeds X/Y/Z Axis: 6000 mm / min Rapid Traverse X-Axis: 15000 m / min Rapid Travel Y-Axis: 15000 m / min Rapid Traverse Z-Axis: 15000 m / min Feed Capacities X/Y/Z: 16000 x 16000 x 20000 N swivel angle: 360 ° Further information: Includes angle head 0,001° The machine can be viewed under power.

Condition: good (used), Year of construction: 2012, Ref. -No.: 10591 Manufacturer: DMG MORI Type: NLX 2500 Y/700 Year of construction: 2012 Type of control: CNC-Steuerung Control: M730BM Storage location: Halberstadt Country of origin: Germany Machine-No.: NL25XXXXX Turning Length: 705 mm Rapid Travel Speed X-Axis: 30 m / min Rapid Travel Speed Y-Axis: 10 m / min Todpfx Ake Ahkwmoisd Rapid Travel Speed Z-Axis: 30 m / min Turning diameter over cross slide: 742 mm Max. Turning diameter: 356 mm X-axis travel: 260 mm Z-axis travel: 795 mm Operating hours: 6500 Hours Driven tool holder: 12 Stc Statistics. Tool holder: 17 Pcs Further information: - Coolant system with increased pressure 5 bar - Hinge belt conveyor, ejection on the right - Integrated parts catcher for main spindle - I/F for bar feed, LNS - Double foot switch with protective cover - Signal light (red, yellow, green) - Total counter - Workpiece counter - 15 bar Grundfos pump incl. Hydac filter - Overhang length for driven tools 100 mm (limited Y-axis travel) - MSQP transformer 45.0 kVA - Hollow clamping device KITAGAWA BB210A821 + KITAGAWA SS1881K21 for the main spindle - An external programming system for the PC The machine can be viewed under power by appointment.

Condition: good (used), Year of construction: 1998, Ref. -No.: 10583 Manufacturer: MTE Tedpfx As Ahkwiskisd Type: BF 4200 Year of construction: 1998 Type of control: CNC-Steuerung Control: Heidenhain TNC 426 Storage location: Halberstadt Country of origin: Germany X-Travel: 4000 mm Y-Travel: 1200 mm Z-Travel: 1500 mm Turning Speeds: 2.500 RPM Rapid Traverse X/Y/Z: 400 m / min Table surface area (LxW): 4200 x 1000 mm Tool changer: 40 Table load max.: 13.000 kg Tool Taper: SK 50 Weight: 20 t Number Of T-Slots: 7 Pcs Width of the T-slots: 22 mm Distance between the grooves: 140 mm Further information: - Heidenhain HR410 handwheel - 3D scanner, infrared - The ball screw on axes Z and Y runs clamped and supported on combined radial/axial roller bearings and radial ball bearings with 250 N/sqm stiffness. The machine can be viewed while powered up.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 26050/2, Year of construction: 2009, operating hours: 10,207 h, load capacity: 3,000 kg, load center: 600 mm, fuel type: electric, mast type: triplex, empty load weight: 5,750 kg, Equipment: 3rd hydraulic function, 4th hydraulic function, UVV, clamp, lighting, sideshift, Equipment: Triplex mast with full free lift, load capacity: 3000 kg at LSP: 600 mm, overall height: 2250 mm, lifting height: 4705 mm, fork positioner with side shifter, opening max.: 1700 mm, min.: 310 mm, fork length: 1600 mm, semi-cabin, work lights at the front, battery 80V/775Ah, charger 80V/100A, SE tires (non-marking), operating manual included. Technical condition at the time of sale: Forklift truck has been technically overhauled! Major service newly performed! UVV inspection passed without any defects! Delivery: In perfect condition! 20 years of professional experience! INSPECTION AND TEST DRIVE: Tjdpj Ahkv Nofx Akisd Available at any time during opening hours after prior arrangement: Monday to Friday. From 8:00 a.m. to 6:00 p.m. Saturday from 8:00 a.m. to 1:00 p.m. TRANSPORT: Low-loader or covered truck available at a reasonable price.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10474 Manufacturer: SPINNER Type: TC77 MCY Year of construction: 2008 Type of control: CNC-Steuerung Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: AP0XXXXX Chuck diameter: 210 mm Tailstock - diameter: 110 mm Feed speed X / Z: 15/24 mm / min Turning Diameter: 500 mm Max. Torque: 113 Nm Travel -X Axis: 350 mm Travel -Y Axis: 230mm (-110mm +120mm) mm Travel -Z Axis: 1160 mm Distance Between Centres: 800 mm Spindle 1 spindle head diameter (flange): A8 mm Spindle 2 spindle head diameter (flange): A6 mm Quills Morse taper: MK4 Turret places: 12 Pcs Machine length: 3250 mm Machine width: 1980 mm Machine Height: 2090 mm Weight Of The Machine Ca.: 7,5 t Max. swing diameter: 690 mm Further information: Spindle head: A8 Todj Ahkvzjpfx Akiod Bar capacity: 77mm Bar capacity: 52mm Number of rotating tool positions: 12 Y axis + C axis. Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC-Steuerung Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm Todpfo Ahkuvjx Akiod travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement.

Condition: used, functionality: fully functional, conveyor belt length: 6,500 mm, conveyor belt width: 1,190 mm, total length: 6,500 mm, total width: 1,950 mm, total height: 450 mm, Equipment: type plate available, Plastic modular belts/belt conveyors Condition: Used Year of manufacture: 2016/2017 Overall length: approx. 6500 mm Overall width incl. motor/feet: approx. 1950 mm Overall width without motor: approx. 1320 mm Conveyor width: approx. 1190 mm Conveyor height (height-adjustable): approx. 410 to 450 mm Material: Steel/Plastic Belt type: Plastic Color: Light gray/Dark gray Including SEW motor (0.75 KW) with Movimot (speed adjustable) Including feet (height-adjustable) Stock quantity: 3 units Price per unit Internal article number: 2026021103 Todpfx Aks Ahkureijd The conveyor system was in operation until it was dismantled. Thanks to the excellent workmanship of the conveyor system, your material glides gently to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We will gladly create a customized offer for you or advise you on design or assembly issues. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, pharmaceuticals, crafts, or the electronics industry. Together, we will develop solutions to optimize your processes and material flow in a cost-effective and sustainable way. We can also offer you fully automatic sorting technology or complementary components such as picking shelves or containers. Features: Condition: fully functional, with signs of use Ideal for fast material transport Professionally disassembled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst)

Condition: used, Year of construction: 2021, operating hours: 50 h, functionality: fully functional, input voltage: 230 V, laser power: 130 W, type of cooling: water, total width: 1,900 mm, total height: 1,040 mm, total length: 1,405 mm, overall weight: 430 kg, laser wavelength: 10,600 nm, input frequency: 50 Hz, Thunder Laser Nova 51 – 130 W CO₂ Laser Cutter & Engraver Thunder Laser Nova 51 CO₂ laser cutter and engraver for sale. Purchased in December 2021 from the Czech supplier, Narran. Suitable for cutting and engraving wood, acrylic, and other laser-compatible non-metallic materials. Ideal for sign making, model making, and workshop production. Technical specifications: - Laser power: 130 W - Working area: 1,300 × 900 mm - Overall dimensions (W × D × H): 1,900 × 1,405 × 1,040 mm Tjdpfx Aj Ahkucskied - Net weight: approximately 430 kg - Water-cooled laser tube - Laser wavelength: 10.6 μm

Condition: good (used), Year of construction: 2011, operating hours: 1,582 h, load capacity: 1,400 kg, lifting height: 6,455 mm, fuel type: electric, mast type: triplex, construction height: 2,725 mm, empty load weight: 3,200 kg, mileage: 1,582 km, - Outdoor reach truck with large tires - Brand: Still - Year of manufacture: 2011 - Only 1,582 hours - Capacity: 1,400 kg Tsdpfx Ae Ahktuekied - Lifting height: 6,455 mm - Mast height (fully raised): 2,725 mm - Equipped with FREELIFT - SIDESHIFT - Battery: 2011 - Includes charger - Video to follow

Condition: used, functionality: fully functional, Year of construction: 2009, total length: 18,000 mm, total width: 870 mm, motor manufacturer: SEW, Belt Conveyor / Conveyor Belt / Belt Band 18000x870 Approx. 18 meters Manufacturer: Costo Year of manufacture: 2009 Model: Gurt Condition: Used Total length: approx. 18,000 mm Total width incl. motor: approx. 870 mm Total width without motor: approx. 790 mm Belt width: approx. 700 mm Belt type: Smooth Frame made of steel Frame height: approx. 105 mm Color: Dark grey The conveyor system consists of 8 segments: 7 segments: approx. 2,250 mm 1 segment: approx. 2,330 mm Supports must be ordered separately Including SEW motor Internal item number: 2026022103 Tjdpfx Akj Ahktbjisd The conveyor system was fully operational up to dismantling. Condition: Fully functional, with signs of wear Ideal for rapid material transport Professionally dismantled and packed Thanks to the excellent workmanship of this conveyor system, your materials glide smoothly to their destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic systems for loading and unloading your goods, we are your competent partner! We are happy to provide you with a custom quote or advise you on system design or assembly questions. Simply let us know your requirements and local conditions. Benefit from our many years of experience and vast network of specialists. We have already successfully completed projects for companies across a wide range of industries, such as logistics, pharmaceuticals, craft, and electronics. Together, we will develop solutions to optimize your processes and material flow cost-effectively and sustainably. We can also offer you fully automated sorting technology or complementary components such as order picking racks or containers.