Radhika Engneers

Year of construction: 2020, condition: like new (used),

Year of construction: 2020, condition: like new (used),

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,250 kg, maximum load weight: 14,750 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 10,020 mm, total width: 2,550 mm, total height: 1,250 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with central-axle trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with sturdy 20"-based arms for 7.15 m, 7.45 m, and 7.82 m swap bodies (Note: When used in combination with the impact guard, the guard protrudes beyond the 7.15 m swap body) 1 pair of front transmission support legs, with straight lower section and single-side operation on the right rear 1 pair of transmission support legs at the rear, with straight lower section and single-side operation on the right side 2 wheel chocks with holders Aluminum side impact protection Side impact protection set inward, for optimal clearance to the swap body supports Steel underrun protection Rear mud flaps across the entire width Half-shell fenders Mud flaps *Towing Equipment for Central-Axle Trailers Towing beam with certified 50 mm tow eye, freight carrier version Flat flange plate for tractors with a clearance-type low-bed trailer, connected to the towing beam at the top and bottom Towing beam clamped/bolted, easily replaceable, and partially adjustable in length! Lower coupler drawbar, free drawbar length approx. 2200 mm Fold-down bracket with spring assistance on the drawbar, for routing the connection cables to the truck *Axles + Suspension BPW disc brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Iaedpjzd Udcofx Aa Ieu Air suspension *Brake system 2-line compressed air brake system Color-coded wiring for easy servicing. Air reservoir: 208 liters Air-spring parking brake, Control panel at the rear right Duomatic connection at the front, with connecting line to the tractor unit, connection at the rear right 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, connection at the rear right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift and lower valve, hold function in both lower and lift positions Vehicle - Vehicle Stability Control System *Wheels and Tires 385/65 R22.5" Manufacturer's choice Steel rims, factory silver *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting Connectors for electrical and air connections on the drawbar 2 white front position lights 2 white/red rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, connection at FR-right 2 additional LED work lights, recessed and integrated into the rear, activated via the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light *Country of Registration/License Plates Germany With DEKRA approval and certification (per §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Warning sign per ECE - 70 Night parking sign front and rear Contour markings with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint finish Frame Hot-dip galvanized or painted according to customer specifications

Condition: used, overall weight: 16,000 kg, loading space length: 7,700 mm, loading space width: 2,460 mm, GERMAN DEALER offers: Swap body 7.82 m Galvanized Lashing rings Low frame Internal dimensions: 7700x2460 mm Many swap bodies and drawbar trailers in stock! ##### PLEASE CALL – NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES DELIVERING SINCE 1983! VIEWING BY APPOINTMENT ONLY! Iaodezd Uc Sopfx Aa Ieu #####

Condition: excellent (used), Kuka Robot Here, we offer a Kuka robot for sale. (As new/unused) Kuka robot KR 60L30-3 Arm length: 1220 mm Number of axes: 6 Weight: 665 kg Axis 1 (A1) ± 150˚: 128˚/s Axis 2 (A2) +75˚/-105˚: 102˚/s Axis 3 (A3) +158˚/-120˚: 128˚/s Axis 4 (A4) ±350˚: 260˚/s Iodpszd Uc Ejfx Aa Ieau Axis 5 (A5) ±119˚: 245˚/s Axis 6 (A6) ±350˚: 322˚/s With sealed software Rated payload: 30 kg Controller: KRC4 Type: KR 60 L30-3 Scope of delivery: (See pictures) We are happy to answer any further questions you may have by phone. Written orders can be placed via email or fax.

Condition: used, Year of construction: 2024, machine/vehicle number: LC649, Used Complete Bottling line for vine - glass - 10.000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for high-quality wine production and industrial packaging applications. Centered around a Sympak Master Tronic 40/48/8-8 platform from 2005, it integrates depalletizing, rinsing, isobaric filling, capsuling, wirehooding, labeling, case handling, palletizing, and end-of-line printing. The system is optimized for glass bottles and includes microfiltration for beverage production quality assurance.Manufacturer: Sympak Bottling & Canning S.p.A.Main platform model: Master Tronic 40/48/8-8Manufacturing year: 2005Container types: Designed for Glass bottle handlingProduct types: Ideal for Wine production applications (still and sparkling)Filling principle: IsobaricFiller capacity: up to 16,000 bphCapsuling capacity: up to 7,200 bphLabeling capacity: up to 5,200 bphElectrical supply: 380 V, 50 HzInstalled power (main monoblock): 33 kWOperating pressure: up to 7 barTemperature limits: TS min 5 °C; TS max +85 °CStandards: CE marked; EN 60204-compliant control rulesAdvanced Automation & Control SystemsThe line incorporates industrial automation for coordinated operation across depalletizing, bottle preparation, filling, and end-of-line packaging. Safety interlocks, guarding, and emergency stop circuits are built in according to CE and EN 60204 electrical safety rules. The isobaric filling environment is pressure-rated for beverage production, supporting stable filling performance and product integrity.Production Line Integration CapabilitiesThis second hand packaging machinery set integrates smoothly as a turnkey used bottling line. Infeed depalletizing, conveyors, bottle washer/rinser/dryer, isobaric filler, capsuling and wirehooding stations, labeling, coding, case forming/packing/sealing, palletizing, and stretch wrapping are harmonized for inline operation. The equipment mix supports traditional cork and synthetic closures and integrates microfiltration for quality control. Typical wine bottle sizes and formats can be accommodated through format changeovers as defined by the installed components. The overall line throughput is typically balanced by labeling and capsuling stages, with nominal outputs up to approximately 5,200 bph depending on product and format.Machine Condition & Maintenance HistoryThe line is presented in ready-for-operation working condition, with components noted as reconditioned in Italy. Routine service and reconditioning practices have been applied to ensure reliable performance across the integrated stations. The system reflects professional upkeep, maintaining production quality for industrial bottling and beverage production.Operational Performance & VersatilityDesigned for wine bottling, the isobaric filling configuration combined with dedicated capsuling and wirehooding enables both still... Iodszd Ucxspfx Aa Isau

Condition: used, empty load weight: 3,155 kg, maximum load weight: 14,845 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2014, next inspection (TÜV): 09/2026, loading space length: 7,820 mm, suspension: air, tire size: 235/75R17,5, maximum speed: 210 km/h, Equipment: ABS, GERMAN DEALER offers: Jumbo tandem trailer Galvanized 235/75R17.5 Twin tires BPW axles Drum brakes Spare wheel 3 storage boxes We have many trailers and interchangeable platforms in stock! ##### Iedozd Ucropfx Aa Ieau PLEASE CALL - NO EMAILS! ##### DELIVERY THROUGHOUT GERMANY IS POSSIBLE! MEPO COMMERCIAL VEHICLES HAS BEEN PROVIDING VEHICLES SINCE 1983! VIEWING BY APPOINTMENT ONLY! #####

Condition: used, Year of construction: 1978, 1 used Vollmer circular saw blade sharpening machine, model CNE Grinding wheel diameter: 200 mm Suitable for circular saw blades up to 750 mm in diameter 16A plug Iedpfxozd Ucls Aa Ijau

Condition: excellent (used), Denso industrial robot with Denso controller Here we offer a Denso industrial robot with a Denso controller. Industries and applications The VS-068 series offers high speed and high performance in a compact, slim housing. In addition, numerous options are available, enabling operation in a wide variety of environments. Thanks to its high-speed performance, accuracy, and the wide range of available options, the VS-068 can be used in almost all areas, including the automotive, chemical, consumer goods, electronics, food, greenhouse, machine tool, medical device and pharmaceutical, plastics, and metalworking industries. The robot model can be used for assembly, inspection, alignment, material handling, material tending, packaging, palletizing, and custom applications. Denso 6-axis robot VS-068 with Denso robot controller 410200-2611 This compact model impresses with its outstanding performance and speed. Robot model VS068A4-AV6-C3N-ANNDN-NNNN Arm reach 710 mm Payload 7.0 kg Cycle time 0.31 sec Repeatability ±0.02 mm Weight: 49 kg Isdpfx Aozd Ucfsa Ijau Year of manufacture: 2016 Type: Denso 6-axis robot VS-068 / Controller 410200-2611 Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Denso Industrial Robot with Denso Controller Iajdpfx Aaozd Ub Uo Ieu Here we offer a Denso industrial robot with a Denso controller. Industries and Applications The VS-068 series offers high speed and high performance in a compact, slim housing. In addition, numerous options are available, enabling operation in a wide variety of environments. Thanks to its high-speed performance, accuracy, and diverse available options, the VS-068 can be used in almost all areas, including the automotive, chemical, consumer goods, electronics, food, greenhouse, machine tool, medical device and pharmaceutical, plastics, and metalworking industries. The robot model can be used for assembly, inspection, alignment, material handling, material management, packaging, palletizing, and custom applications. Denso 6-axis robot VS-068 with Denso robot controller 410200-2611 This compact model impresses with outstanding performance and speed. Robot model VS068A4-AV6-C3N-ANNDN-NNNN Arm reach 710 mm Payload 7.0 kg Cycle time 0.31 sec Repeatability ±0.02 mm Weight: 49 kg Year of manufacture 2016 Type: Denso 6-axis robot VS-068 / Controller 410200-2611 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Denso industrial robot with Denso controller Here we offer a Denso industrial robot with a Denso controller. Industries and applications The VS-068 series offers high speed and high performance in a compact, slim housing. In addition, numerous options are available, enabling operation in a wide variety of environments. Thanks to its high-speed performance, accuracy, and the wide range of available options, the VS-068 can be used in almost all areas, including the automotive, chemical, consumer goods, electronics, food, greenhouse, machine tool, medical device and pharmaceutical, plastics, and metal industries. The robot model can be used for assembly, inspection, matching, material handling, material processing, packaging, palletizing, and custom applications. Denso 6-axis robot VS-068 with Denso Robot Controller 410200-2611 The compact model impresses with outstanding performance and speed. Robot model VS068A4-AV6-C3N-ANNDN-NNNN Arm reach 710 mm Payload 7.0 kg Cycle time 0.31 sec Repeatability ±0.02 mm Weight: 49 kg Year of manufacture: 2016 Type: Denso 6-axis robot VS-068 / Controller 410200-2611 Condition: used Iasdpfxozd Ub Ie Aa Iou Scope of supply: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Denso Type: Denso 6-axis Robot VS-087 / Controller 410200-2611 A VS087-AV6-C3N model features a Cleanroom Class 3 protection specification. Denso industrial robot with Denso controller. Industries and Applications: The VS-087 series delivers high speed and high performance in a compact, slim housing. In addition, numerous options are available, making operation possible in a wide range of environments. Thanks to its high-speed performance, precision, and the variety of available options, the VS-087 can be used in nearly any sector, including automotive, chemical, consumer goods, electronics, food, greenhouse, machine tool, medical devices & pharmaceutical, plastics, and metal industries. The robot model can be used for assembly, inspection, alignment, material handling, tending, packaging, palletizing, and custom applications. Denso 6-axis Robot VS-087 with Denso Robot Controller 410200-2611 The compact model impresses with outstanding performance and speed. Robot model VS-087A4-AV6-C3N-ANNDN-NNNN Iaodpfx Aaozd Ubzo Iou Reach: 905 mm Payload: 7.0 kg Cycle time: 0.34 sec Repeatability: ±0.03 mm Weight: 51 kg Year of manufacture: 2016 Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: ready for operation (used), Year of construction: 2000, Saw blade diameter: 800 mm Cutting height (max.): 300 mm Cutting width (max.): 550 mm Overall length: 2,000 mm Overall weight: 1,000 kg Overall width: 2,300 mm Iajdpfx Aozd Ubuea Iou Overall height: 2,000 mm Working height: 940 mm Input voltage: 400 V Saw drive: 11 kW Saw blade arbor: 40 mm Operating pressure: 8 bar 8 roller conveyors, each 2 m long; roller width: 500 mm

Condition: new, Year of construction: 2026, THE LARGEST BANDSAW IN ITS CLASS – the high-performance industrial bandsaw Wravor WRC 1250 AC – robust, precise, and suitable for cutting large logs. Equipped with automatic control and advanced features for maximum efficiency! ✔ strong and stable construction ✔ high precision ✔ large cutting capacity ✔ automatic control ✔ reliable and robust design ✔ main wheels made of cast steel, double-bearing (EXTREMELY STABLE CONSTRUCTION!), wheel diameter: 1250 mm, width 135 mm ✔ saw blade length: 160/180 (DOUBLE-SIDED) L = 9045 mm ✔ motor power: 55kW – 110kW, frequency converter optional Saw width: approx. 4500 mm (depending on equipment) Track width: approx. 2300 mm (depending on equipment) Saw weight: approx. 23,500 kg (depending on equipment and chassis length) Ijdpfx Aaszd Ua Rj Ijau Maximum cutting width (between guides): 1300 mm

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, operating pressure: 200 bar, total length: 1,100 mm, high-pressure hose length: 10,000 mm, total height: 850 mm, total width: 670 mm, pressure: 200 bar, empty load weight: 20 kg, fuel: super 95, overall weight: 80 kg, warranty duration: 12 months, power: 8.09 kW (11.00 HP), pressure (max.): 200 bar, water pressure: 200 bar, Equipment: chassis, The BMK series high-pressure cleaners are powered by a Honda gasoline engine and therefore do not require an external power connection. They offer maximum mobility and flexibility for work in areas with limited infrastructure. These devices are particularly characterized by their simple and, as a result, durable design. The machine can optionally be equipped with an electric starter (E-start). Included accessories: - 10 m high-pressure hose DN10, with kink protection on both sides - HP350 Soft CL high-pressure gun with swivel joint at the inlet - CL twin nozzle with nozzle protection, including flat jet high-pressure nozzle Dimensions: 1100 x 670 x 850 mm Weight: 80 kg Available models: BMK 160-25 | 160 bar | 25 l/min Iodpfx Aezd Uawea Isau BMK 200-20 | 200 bar | 20 l/min BMK 250-15 | 250 bar | 15 l/min

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, AXA VHC-3-4500-XTS CNC Machining Center Manufacturer: AXA Entwicklungs- und Maschinenbau GmbH, Germany Model: VHC-3-4500-XTS Year of Manufacture: 2006 Control System: Heidenhain iTNC 530 B Machine Number: 86698 Iodezd Uadepfx Aa Ijau Technical Specifications Heavy-duty CNC machining center Long-bed configuration with approximately 4,500 mm X-axis travel Heidenhain iTNC 530 B CNC control 3-axis machining capability (additional axes depending on machine configuration) Electrical connection: 3 × 400 V / 230 V / N / PE Installed power: 69 kVA Main fuse protection: max. 125 A Control voltage: 24 V DC Frequency: 50 Hz Equipment Fully enclosed work area with safety guarding Automatic lubrication system Electrical cabinet equipped with an industrial cooling unit Chip conveyor system CE-marked machine Included cooling unit Manufacturer: Fuhrmeister / DKC Model: R5KLMFUH15021LT Cooling capacity: approx. 1.4 – 1.6 kW Refrigerant: R134a Power supply: 230 V Application

Condition: excellent (used), Year of construction: 2017, Technical Specifications: Total pressing force 1500 kN Setting range 10 – 100 % Total pressing surface 3100 x 1350 mm Specific pressure at full charge 3,6 daN/cm² (kp/cm²) 6 cylinders 90 mm diameter 400 mm stroke Operating hydraulic pressure 395 bar Daylight height 400 mm Daylights 2 Iasdpfozd T Uyjx Aa Iou Daylight opening 150 mm 400V 50Kz 3 phase CE 3 pieces heating devices each with 18 kW for heating up the fluid medium water to a working temperature of 130°C.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2021, suspension: air, tire size: 385/65R22.5, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Rear doors - Air suspension = Additional Information = Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Iaodpfx Aaezd T Uto Isu Rear axle 1: Max. axle load: 9000 kg; Axle brand: SAF CD; Tire tread depth left: 50%; Tire tread depth right: 50% Rear axle 2: Max. axle load: 9000 kg; Axle brand: SAF CD; Tire tread depth left: 50%; Tire tread depth right: 50% Rear axle 3: Max. axle load: 9000 kg; Axle brand: SAF CD; Tire tread depth left: 40%; Tire tread depth right: 40% Unladen weight: 7,240 kg Please contact Bob Beukers for further information.

Condition: excellent (used), Mitsubishi Industrial 6-Axis Articulated Arm Robot Here, we offer a Mitsubishi Industrial 6-Axis Articulated Arm Robot. Mitsubishi Industrial 6-Axis Articulated Arm Robot 6-Axis Articulated Arm Robot RV-3SB Maximum payload: 3.5 kg Weight: 38 kg Robot controller CR2B-574-S312 Iasdpjzd T Uajfx Aa Iou Teach pendant R46TB with color/touch display Type: Mitsubishi Melfa RV-3SB Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, DECKEL MAHO DMF 220 linear Machine Type: Vertical CNC Machining Center Manufacturer: DECKEL MAHO Model: DMF 220 linear Control System: Siemens 840D ShopMill Technical Specifications - X-axis travel: 2,200 mm - Y-axis travel: 560 mm - Z-axis travel: 720 mm - Table size: 2,600 × 600 mm - Table load capacity: 2,200 kg - Tool holder: SK40 / HSK-A63 DIN 69893 - Spindle speed: 20 – 18,000 rpm - Feed rate: up to 20,000 mm/min - Rapid traverse X-axis: 100 m/min - Rapid traverse Y/Z-axis: 50 m/min - Tool magazine: 30 positions - Spindle hours: approx. 7,086 h - Idle running hours: approx. 24,652 h - Total power requirement: approx. 70 kVA - Machine weight: approx. 12.5 tons Equipment & Features - Mineral cast machine bed - Chip conveyor with coolant tank - Cooling lubricant unit with compact filter system - AC servo drives on X, Y and Z axes - Hydraulic/mechanical tool clamping - Linear measuring system on all axes Iodjzd T T Nopfx Aa Ijau

Condition: like new (used), Year of construction: 2018, operating hours: 4,788 h, functionality: fully functional, machine/vehicle number: NB01, spindle bore: 83 mm, turning length: 1,000 mm, center width: 350 mm, turning diameter over bed slide: 570 mm, bed width: 350 mm, total length: 2,850 mm, total width: 2,400 mm, total height: 1,800 mm, overall weight: 3,800 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 2,500 rpm, three-jaw chuck diameter: 250 mm, torque: 1,300 Nm, The machine is still connected to the power supply and can be inspected at the factory. It is in like-new condition. Equipped with a SIEMENS SINUMERIK 840 D SL control system. Technical data and equipment details can be found in the PDF attachment. Iajdpfszd T T Aex Aa Isu

Condition: used, Compact Vegetable Washer with Discharge Conveyor Available from STC Food Solutions Iasdpfx Aozd T Tvea Ieu This compact stainless steel vegetable washer is designed for efficient washing and conveying of vegetables and fresh produce. The machine features an integrated discharge conveyor, water recirculation system, spray rinsing section, and collection tank, making it a practical solution for small to medium-sized processing operations. Features - Stainless steel construction - Compact footprint - Integrated discharge conveyor - Water recirculation and filtration system - Product rinsing spray bar - Collection/sedimentation tank - Easy-to-clean hygienic design - Adjustable support legs - Electrical control panel included Suitable for - Leafy vegetables - Herbs - Root vegetables - Salad crops - Other fresh produce Condition The machine is in good working condition and forms a solid basis for further use. It will still pass through the STC workshop for inspection and servicing prior to delivery or sale. A compact and cost-effective solution for companies looking to expand or upgrade their vegetable washing capacity. For more information, photos, pricing, or a viewing appointment, please contact STC Food Solutions.

Condition: good (used), load capacity: 200 kg, SWP PTA 2000 Welding Positioner / Manipulator Type 2-axis welding positioner (rotation + tilting) Nominal load capacity 2,000 kg Rotation 360° continuous Rotation speed approx. 0.01 – 2 rpm (infinitely variable, depending on drive option) Tilt range 0° – 135° Drive system Electric motor (optional servo/brushless version) Iaodpfx Aszd T Tpea Iou Power supply 3 × 400 V, 50 Hz Table diameter approx. 800 – 1000 mm (depends on configuration) Max. eccentric load approx. 150 – 200 mm Max. load moment approx. 1,500 – 3,000 Nm (configuration dependent) Center height approx. 850 – 950 mm Machine weight approx. 600 – 1,200 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2019, operating hours: 31,732 h, clamping force: 2,300 kN, screw diameter: 55 mm, total height: 2,160 mm, overall weight: 12,000 kg, product length (max.): 5,871 mm, This HAITIAN ZE2300 was manufactured in 2019. It features a clamping force of 2300 kN, a platen opening stroke of 1150 mm, and a screw diameter of 55 mm. Equipped with a robot and Euromap 67 interface, it remains in excellent condition and is still in production. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN ZE2300 machine we have for sale. Contact us for more information. • Platen opening stroke: 1150 mm • Minimum mould height: 220 mm • Maximum mould height: 600 mm • Tie-bar distance: 620 × 620 mm Iodozd T S Sepfx Aa Isau • Platen dimensions: 920 × 920 mm • Centering ring diameter: 160 mm • Maximum injection volume: 570 cm³ • Injection nozzle radius (tip): R10 • Motor power: 47 kW • Heater power: 25 W • Number of electrical connection pins: 32 • Robot interface: Euromap 67 • Operating hours: 31,732 h • Condition: Excellent • Status: In production Additional equipment • Robot (installed)

Condition: used, Year of construction: 2010, machine/vehicle number: 00100060311, Item No. 26090 Technical data: Iaedpfx Aajzd T S Ej Iou - Design: vertical - Max. operating pressure: 10 bar - Pressure vessel capacity: 270 l - Suction volume: 585 l/min - Delivery rate: 440 l/min - Compressor speed: 1200 rpm - Drive: 400 V / 4.0 kW - Boiler diameter, approx.: 600 mm - Space requirement, approx.: W 800 x H 1850 x D 900 mm - Weight, approx.: 150 kg