Alfa Personal GmbH

Condition: new, Year of construction: 2020, Electric furnace MELTEC Typ ZC50/180 TOC incl. iron steel crucible, isolated coverand substructure. Without control cabinet (can be ordered aditionally) Electric heating with heating elements. Transfer of melt below bath level from melting to casting chamber by pump to provide constant bath level together with shot to shot consistency. Crucible content: 820,0 kg/Zn Melting capacity: 180,0 kg/Zn/h Electrical connection: 27,0 kW Type: ZC 50/180 TOC Nwjdpfxjy E Tyne Aaasf suitable for DAW 50F and W50Zn

Condition: new, Year of construction: 2023, Electric furnace MELTEC Typ ZC80/180F ECO V2 incl. iron steel crucible, isolated coverand substructure. Without control cabinet (can be ordered aditionally) The EcoMelTec furnace combines the advantages of the proven multi chamber furnace with many new functions for double savings. New functions help to optimize the handling of the casting process just as: - Good accessibility for cleaning purposes via flexibly mountable flap cover - New pump design enables longer cleaning intervals - Storage for slag container - facilitates cleaning the melt bath - Symmetrical furnace design - no right-hand/left-hand version required Crucible content: 820,0 kg/Zn Melting capacity: 180,0 kg/Zn/h Electrical connection: 27,0 kW Type: ZC 80/180 F ECO V2 suitable for DAW 80F and W80Zn Nwodpfx Aasy E Tyhsasf

Condition: new, Year of construction: 2022, Electric furnace MELTEC Typ ZC20/120F ECO V2 incl. iron steel crucible, isolated coverand substructure. Without control cabinet (can be ordered aditionally) The EcoMelTec furnace combines the advantages of the proven multi chamber furnace with many new functions for double savings. New functions help to optimize the handling of the casting process just as: - Good accessibility for cleaning purposes via flexibly mountable flap cover - New pump design enables longer cleaning intervals - Storage for slag container - facilitates cleaning the melt bath - Symmetrical furnace design - no right-hand/left-hand version required Nwedpfxoy E Tybe Aaajf Crucible content: 420,0 kg/Zn Melting capacity: 120,0 kg/Zn/h Electrical connection: 21,5 kW Type: ZC 20/120 F ECO V2 suitable for DAW 20F and W20Zn

Condition: used, Year of construction: 2017, workpiece weight max. 2000 g Nwsdpfjy Diausx Aaasf used weightcontrol WC2000 for die casting machines up to a unit weight of 2000 grams. The device has been checked and repaired by the manufacturer

Condition: used, Year of construction: 2015, 2015 Kurtz AZ9.20 Low-Pressure Automated Die-Casting System with Balzer Low-Pressure Furnace and Holding Furnace Nwedpsy Amnyofx Aaaef High-Specification Kurtz AZ79.20 Low-Pressure Die Casting Machine, Manufactured In 2015, Designed For Precision Aluminium Casting Applications. This Industrial-Grade Unit Features A Robust Hydraulic Closing System, Integrated Mould Cooling Circuits, And Automated Part Removal System, Making It Suitable For High-Reliability Production Environments. German-Built By Kurtz Gmbh, A Globally Recognised Manufacturer Of Die Casting Systems. The System Was Used To Manufacture 4-Cylinder Car Crankcases. By Simply Changing The Casting Molds, The System Can Be Quickly Converted To Produce Any Component Manufactured Using The Low-Pressure Casting Process. This Means It Can Produce Pump Housings, Oil Pans, Cylinder Heads, Cam Carriers, Transmission Housings, And Much More. Travel Movements (Section 2.4) Hydraulic Movements: Closing Unit (Upper Platen): Stroke: Max. 1,400mm. Maximum Opening: 2,400 Mm. Minimum Opening 600mm. Ejector Stroke 50mm. Part Removal: Stroke 1,365mm. Swivel: 180°. Drop Protection Ratio-Clamp RCS 100: Piston Rod Ø 100 Mm. Max Axial Load: 160 Kn. Max Unlocking Pressure: 160 Bar. Min Unlocking Pressure: 65 Bar. Hydraulic Cylinders. Closing Cylinder: 2 × Ø125/60 – 1,400 Mm Stroke. Ejector Cylinder: 4 × Ø100/63 – 50 Mm Stroke. Side Core Pull: 2 × Ø125/60 – 250 Mm Stroke. Front Core Pull: 2 × Ø160/80 – 270 Mm Stroke. Hydraulic Motors: Removal Lift/Swivel Motor: HSE 4.0.0 / SM4.80 – 180° (Manufacturer: Eckart) Pneumatic Movements: Removal Arm Lift: Max Stroke 400 Mm. Pneumatic Cylinder: DNC Ø63-400-PPV-A (Festo). Cooling System: 24 Water Cooling Circuits. 22 Air Cooling Circuits. Total Return Manifold Ø 88.9 Mm. Compressed Air Requirement: 6 Bar. Air Connection: ½". With A Movable And Height-Adjustable BALZER Pression Furnace And A BALZER Holding Furnace. S/No.FM1000063 (2015)

Condition: used, Year of construction: 2000, closing pressure 900 kN clamping plate 540x540 mm Nwedpfx Ajyzt D Eoaajf distance between columns 350x350 mm weight of the machine ca. 5,5 t lock stroke 280 mm capacity of ejector 60 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 75 kN casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm casting volume (DIN 24480) 119, 163, 214 cm 2 volume cast pressure 380, 315, 265 kp/cm² casting area 236, 285, 340 cm 2 Traverse Stroke 150 m/m General overhauled Die Casting machine DAW 80 GO with DataLogic control for the use of zinc alloys. Excerpt from the overhaul: · Upgrade of the machine with new control cabinet and operator panel including new electric machine installation · Renewal of the hydraulic system (blocks and valves) · locking unit overhaul Details available upon request The machine is equipped with the following options: Front door motorized, rear door manual handling Cover for drop through area at the subframe Hanging operating desk with monitor 1.0.2 Cover for drop through area at the subframe with scale / chute 3.2.4 Multi-chamber furnace with pump TOC 3.2.1 furnace control cabinet 4.0.1 Hydraulic system for water glycol 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.5.2 Equipment package, Remote Service Dialog (RSD) with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.3.1 Lubricant container TD 20 7.4.0.3 Spray rail CR 275 Other options can be offered upon request

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 10306675, type of input current: three-phase, input voltage: 400 V, clamping force: 8,400 kN, input frequency: 50 Hz, Horizontal die casting machine Manufacturer: Bühler, Model: SC D/84, Year: 1999 Serial number: 10306675 Max. locking force: 8,400 kN Cycle time: 30 s Casting piston speed: 5.0 m/s Including Gerlieva GS 1200/1400Z mould spraying unit Including Westomat W900SLDG 900kg holding furnace Including ABB IRS5 45kg extraction robot Nsdpeynh Dlsfx Aaaowf

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 10499123, clearance between the columns: 780 mm, column diameter: 150 mm, ejector force: 225,000 N, ejector stroke: 175 mm, mold height (min.): 360 mm, type of input current: three-phase, input voltage: 400 V, clamping force: 6,615 kN, input frequency: 50 Hz, Horizontal Die Casting Machine Make: Bühler, Model: GKS EVO B66D, Year: 2011 Nwjdpfx Asynhzksaasf Serial number: 10499123 Mold height: 360 - 900 mm Mold opening stroke: 800 mm Max. surface pressure: 100 N/mm² Min. clamping dimensions: 620 x 620 mm Clear tie bar distance: 780 x 780 mm Tie bar diameter: 150 mm Ejector stroke: 175 mm Ejector force: 150 kN Max. clamping force: 6615 kN Cycle time: 30 s Plunger speed: 5.0 m/s Incl. mold spraying unit Gerlieva GS 1000/1400Z Incl. holding furnace Westomat ProDos DPC 900kg Incl. extraction robot ABB IRB4400

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 10298440, clearance between the columns: 640 mm, column diameter: 125 mm, ejector force: 150,000 N, ejector stroke: 145 mm, mold height (min.): 300 mm, type of input current: three-phase, input voltage: 400 V, clamping force: 4,200 kN, input frequency: 50 Hz, Horizontal die casting machine Make: Bühler, Model: SC D/42, Year: 1998, Serial number: 10298440 Mold height: 300 - 750 mm Mold opening stroke: 640 mm Max. surface pressure: 100 N/mm² Njdpfx Asyngyfjaajwf Min. clamping dimensions: 500 x 500 mm Clear tie bar distance: 640 x 640 mm Tie bar diameter: 125 mm Ejector stroke: 145 mm Ejector force: 150 kN Max. clamping force: 4200 kN Cycle time: 30 s Plunger speed: 5.0 m/s Incl. die spraying unit Gerlieva GS 1200/1400Z Incl. holding furnace Westomat ProDos DPC 900kg Incl. extraction robot ABB BUHL ROB 46002004

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10380840, clearance between the columns: 640 mm, column diameter: 125 mm, ejector force: 150,000 N, ejector stroke: 145 mm, mold height (min.): 300 mm, type of input current: three-phase, input voltage: 400 V, clamping force: 4,200 kN, Horizontal die casting machine Make: Bühler, Model: Evolution B42D, Year: 2004, Serial number: 10380940 Mould height: 300 - 700 mm Mould opening stroke: 640 mm Max. surface pressure: 100 N/mm² Min. clamping plate dimensions: 500 x 500 mm Clear tie bar spacing: 640 x 640 mm Tie bar diameter: 125 mm Ejector stroke: 145 mm Nsdpfjyngv Tjx Aaaewf Ejector force: 150 kN Max. closing force: 4200 kN Cycle time: 30 s Casting piston speed: 5.0 m/s Incl. die spraying system Gerlieva GS 1200/1400Z Incl. holding furnace Westomat ProDos DPC 900kg Incl. extraction robot ABB IRB 4600 M2004

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total height: 3,100 mm, total width: 3,100 mm, stroke length: 950 mm, column diameter: 130 mm, mold height (min.): 900 mm, clamping force: 35,000 kN, pressure: 400 bar, Installed and commissioned with dry, test run only. - Two‑platen machine - Max locking force: 35,000kN - Injection force: Approx. 390–420kN (varies by plunger size) - Plunger diameter: Ø130mm - Plunger stroke: 950mm - Shot weight (Al): 6.5–8.5kg, depending on plunger - Projected area at 400 bar: 8,750–9,000cm² (calculated from 35,000kN clamping force) - Platen size (H × W): 3100× 3100mm - Distance between tie bars (H × W): 1950×1950mm - Die height (min / max): 900/1350mm - Die opening stroke: 1200mm Støtek melting system with - Støtek SMG 3.0_7.0 two chamber gas fired melting shaft furnace with ingot charging elevator, furnace melting capacity approx. 1.5t/h - Støtek DTI 6020 holding furnace with Fuco-Heg MBS 2000 molten metal treatment/rinsing station - Støtek AMET 1700 dosing furnace LK Impress Plus DCC 3500 die casting machine with - Siemens PLC S7-1500 controls - ABB IRB 6650S die release agent spray robot - Wollin OSA 15-2-C die release agent supply system and spray head - AED 181-080 die lubrication dilution system - Fondarex Highvac Premium 2C 200 die casting vacuum system with air tank and vacuum pumps - 5x IECI PFN 330 2-Z oil temperature control units - 5x IECI PF-ZH 1802-Z water temperature control units Nedpfx Aaoygxr Rsaswf - KMA Ultravent UV 20000EE fume extraction and filter system - ABB IRB 7600 robot for die casting machine unload, trim press load/unload and cooling station load - LK WB-100 1,000kN trim press with trim conveyor - ABB robot for cooling station unload, laser marking and outfeed - Keyence MD-X 1500C 3 axis laser marking system - Outfeed conveyor with cooling tunnel A quantity of spare parts is available with the line.

Condition: new, Year of construction: 2025, closing pressure 240 kN clamping plate 380x380 mm distance between columns 250x250 mm weight of the machine ca. 3,0 t lock stroke 180 mm capacity of ejector 28 kN ejector stroke 50 mm height of form 120-300 mm column diameter 45 mm casting capacity 43 kN casting plunger stroke 85 m/m injection plunger diameter 36,40,45 mm casting volume (DIN 24480) 47,63,87 cm ³ volume cast pressure 420,340,270 da/cm² casting area 56,70,88 cm 2 Traverse Stroke 150 m/m Equipment of the machine 1.0.2 Cover for drop through area at the subframe with scale/chute 1.0.3 Cover for small parts in the subframe 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1.2 Ejector function package "Technology" including SensiEject 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.0.1.2 Casting assistance package Technology including SensiInject 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.5 Maintenance plus package 5.6.0 Special cable lengths 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional Nsdpsx Hp E Asfx Aaaewf machine 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.1 Spray rail CR 155

Condition: used, Year of construction: 1994, functionality: limited functionality, Used Oskar Frech DAW 125 with control cabinet and crucible Nwsdpfx Aaewywn Eeasf

Condition: good (used), Year of construction: 2020, Foundry machine for aluminum, IDRA 320PRP Refurbished Ontogepszerviz in year 2020 Nsdpfx Aaowpr Ufsaswf Good working condition AVAILABLE FOR SALE STARTING WITH 1ST OF SEPT 2025 SALE CONDITION IS EXW - DISMATLING AND TRANSPORT NOT INCLUDED IN THE SALE PRICE

Condition: used, Year of construction: 1997, functionality: fully functional, clearance between the columns: 579 mm, casting force: 350 N, stroke length: 420 mm, column diameter: 125 mm, overall weight: 12,000 kg, power: 22 kW (29.91 HP), Locking Force: 350 metric tons Tie Bar Diameter: 125 mm Clearance Between Tie Bars: 579 x 579 mm Die Thickness (Minimum - Maximum): 300 - 700 mm Die Stroke: 420 mm Moving Platen Size: 940 x 940 mm Injection Position: -125 mm Nedpfxjv D Dwpj Aaaowf Power Requirement: 22 kW Machine Weight: 11,974 kg (26,400 pounds) Sold with trimming press and manipulator.

Condition: like new (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, overall weight: 56,000 kg, Clamping force: 11.168 kN Clamping force: 1.138 Ton Nsdpfx Aaeu Svaceaewf Ejection force: 433 kN Max. die height: 1,050mm Min. die height: 450mm Plate dimensions HxV: 1.620 x 1.620mm Tie bar spacing: 1.000 x 1.000mm Tie bar diameter: 200mm Movable platen stroke: 960mm Ejection stroke: 230mm Working pressure: 180 bar Dry Cyclyng: 2.5 n/1" Pump motor power: 45kW Machine weight: 56T Machine dimensions: 10.8 x 4.5x 4.3m

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Nwjdpfjucfwpex Aaasf

Condition: new, Year of construction: 2024, closing pressure 900 kN clamping plate 540x540 mm Nwjdpfer Hwf Aox Aaajf distance between columns 350x350 mm weight of the machine ca. 5,3 t lock stroke 280 mm capacity of ejector 61 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 78 kN casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm casting volume (DIN 24480) 147, 191, 241 cm 2 volume cast pressure 396, 327, 275 da/cm² casting area 226, 274, 326 cm 2 Traverse Stroke 220 m/m Equipment of the machine 1.0.2Cover for drop through area at the subframe with scale/chute 1.1.0Motorized guard in casting direction left 1.4.0Machine positioning mounting pads 1.5.4Machine interior illumination 1.11.0Convenience package energy efficiency 2.0.1Ejector assistance packages 2.6.4Machine assistance system SensiLock 2.8.0Hydraulic adjustment of locking unit for shot positioning 3.0.1Casting assistance package Basic 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4Prefilling process 3.4.5Simplified piston removal 3.4.6Piston stop during return stroke 3.5.2Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0Shut-off facility for hydraulic locking and injection unit 4.6.1.3Integrated water circuit 2+6 circuits 5.1.0Machine control DATADIALOG - Realtime Control (RC) 5.1.5Maintenance plus package 5.6.1Special cable lengths 6.1.3.1Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1Hanging operating desk with monitor 6.5.2Service Package RSD with Switch for each additional machine 7.2.2.2Spraymotion 611 E with servo drive, 1-circuit 7.2.10Extended spraying program for spraymotion 7.3.1Lubricant container TD 20 7.4.0.3Spray rail CR 275

Condition: like new (used), Year of construction: 2000, machine/vehicle number: 32577, Automated high-pressure die casting machine Bühler. 7900 kN clamping force. 500 mm plunger stroke Njdpfefbl E Sjx Aaajwf Air conditioning KMA / Bentleon type Ultravent / AFS 6000 (2000) The machine is DISMANTLED. Has been repainted recently.

Condition: like new (used), Year of construction: 1995, machine/vehicle number: 10262342, Automated high pressure die casting machine Bühler. 9800 kN clamping force. Machine is DISMANTLED Nodjfbl Enjpfx Aaajwf