Gebra Gitterrostbau GmbH

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Wire EDM machine type Agiecut Classic 2s, year of manufacture 2004, for sale. The machine is in good condition and operates flawlessly. An inspection under power is gladly possible. A video is also available upon request. Technical machine data: Agiecut Classic 2S • Manufacturer: AGIE SA, CH-6616 Losone (Made in Switzerland) • Model / Type: AGIECUT CLASSIC 2S • Year of manufacture: 2004 (with CE marking) • Serial number (unit): 663 • Equipment list No.: C32.102 • Circuit diagram No.: 629.412 Electrical connection values & performance • Voltage: 3 x 400 V Hnsdpfxsy Snm Nj Aagol • Frequency: 50 Hz • Power: 9 kVA • Rated current: 14 A • Short-circuit current: 10K Weight & components • Total weight: 2,580 kg • Subcomponents (serial numbers): o MC 2S CLASSIC (unit): Serial 663 / Equipment List 002.354 o DA CLASSIC 2S: Serial 659 / Equipment List 033.804 o CABINET CLASSIC 2S (control cabinet): Serial 665 / Equipment List 028.254 Loading can be arranged by us upon agreement. If you have any questions, please feel free to contact us at any time.

Condition: good (used), Year of construction: 2006, MACHINE Wire EDM Machine Manufacturer: Mitsubishi Machine Model: FA 20 Control: Year of Manufacture: 2006 TECHNICAL DATA Hnjdpfx Aajy Snbmjgsl Travel distances - X-axis: (mm) 500 - Y-axis: (mm) 350 - Z-axis: (mm) 300 Machine Table - Table size, fixed table L x W: (mm) 780 x 630 - Max. table load: (kg) 1,500 - Workpiece dimensions: (mm) 1,050 x 800 x 295

Condition: used, Year of construction: 2010, Agie Charmilles FI 640 CC Wire-Cut Electro-Discharge Machine. Serial No. 113 (2010) Please Note: this lot has been professionally decommissioned and secured for transit Hnjdoy Rz Iwjpfx Aagel Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2007, Wire EDM machine Sodick AQ537L, year 2007, with low operating hours. It is equipped with a total operating hours counter (powered-on hours), which shows approximately 4,500 hours. Of these, about 70% are actual wire EDM machining hours, equating to roughly 3,100–3,500 true working hours. Hnsdpfx Asy Rxtksagsl

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total width: 1,050 mm, wire diameter (max.): 0.3 mm, overall weight: 3,500 kg, controller manufacturer: MITSUBISHI, controller model: D‑CUBES / M800 series, product length (max.): 3,030 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi MV2400R wire-cut EDM machine was manufactured in 2017. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 310 mm, accommodating workpieces up to 1050 × 820 × 305 mm and weighing up to 1500 kg. If you are looking to get high-quality wire-cutting capabilities, consider the Mitsubishi MV2400R machine we have for sale. Contact us for further details. • Axis travels: U ±75 mm, V ±75 mm • Max. workpiece dimensions (W × D × H): 1050 × 820 × 305 mm • Max. workpiece weight: 1500 kg • Table dimensions (W × D): 840 × 640 mm • Max. taper angle: 15° at 260 mm workpiece height • Wide‑angle taper (option): up to 45° at 60 mm (with special guides) • Positioning accuracy: ≤ ±2 μm over full stroke (MV‑R series spec) • Dielectric tank capacity: 860 L Hedoy Rrcfopfx Aagonl • CNC control: Mitsubishi D‑CUBES / M800 series; Industry 4.0 ready (networking and monitoring interface) • Machine condition: Excellent condition; very low hours • Industry 4.0: Prepared for connectivity

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 700 mm, workpiece length (max.): 550 mm, empty load weight: 1,800 kg, travel speed (max.): 1,300 mm/min, Equipment: documentation/manual, Mitsubishi BA 8 (5-axis) including Aqua Pinoneer Maxi 100x404 (conductivity control) Hnodpsy Nmx Sofx Aagel

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 410 mm, controller model: Fanuc Alpha 180is-WB, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified deadline, by 08.06.26! TECHNICAL DETAILS Workpiece weight: 1,000 kg Travel distance X-axis: 550 mm Travel distance Y-axis: 370 mm Travel distance U-axis: 410 mm Travel distance V-axis: 120 mm Travel distance Z-axis: 120 mm Maximum cutting angle: 30° Number of axes: 5 Rapid traverse X-axis: 900 mm/min Rapid traverse Y-axis: 900 mm/min Rapid traverse U-axis: 450 mm/min Rapid traverse V-axis: 450 mm/min Rapid traverse Z-axis: 900 mm/min MACHINE DETAILS Hnjdpfx Aasy Nmxxjgjl Control system: Fanuc Alpha 180is-WB Operating hours: approx. 32,000 h Machine weight: 3,100 kg EQUIPMENT Automatic wire threading Note: Sale does not include the monitor above the control unit.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 55DM2752, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 400 mm Travel range Z-axis: 310 mm Travel range U-axis: ±75 mm Travel range V-axis: ±75 mm Wire diameter: 0.1 - 0.3 mm Max. workpiece dimensions: 1,050 x 820 x 305 mm Max. workpiece weight: 1,500 kg Table dimensions: 840 x 560 mm Table design: U-shaped Taper angle: max. 15° Taper angle at workpiece height: max. 260 mm MACHINE DETAILS Dielectric tank Tank capacity: 860 l Filtered particle size: 3 µm Water purifier: 10 l Hsdey I Uvcepfx Aagjnl Dry weight: 350 kg General power supply: 13.5 kVA Air pressure: 0.5 - 0.7 MPa Air consumption: 75 l/min or more Dimensions & Weight Dimensions (W x H): 2,022 x 2,150 mm Weight: 3,500 kg

Condition: used, Year of construction: 2018, Technical details: x-travel: 650 mm y-travel: 450 mm z-travel: 420 mm Hnodey I Ak Iopfx Aagsl control: MAKINO Hyper i U-axis: ± 75 mm V-axis: ± 75 mm max. size of workpiece LxWxH: 1000 x 800 x 400 mm workpiece weight: max. 1500 kg Table dimensions: 910 x 710 mm weight of the machine ca.: 5 t Dimensions (L/W/H): 3 x 3 x 2,3 mm Accerories Memory 10 GB Ethernet I/P Interface Wire EDM in good condition. *

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, overall weight: 2,650 kg, input frequency: 50 Hz, Possible accessories can be discussed on site. Hedpfxsy Irdks Aagonl

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Charmilles Robofil 440 CC Hedpfoy Ifrhox Aagonl Year of manufacture: 2004 Charmilles Millenium control Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Machine dimensions (complete): 2600 x 2810 x 2240 mm Total machine weight: 3300 kg The machine is currently connected to power and can be inspected under power. On request, we offer the following services: - Commissioning of the machine at your site - Overhaul with 6 months warranty - Control system training - Accessories such as chiller and clamping devices

Condition: used, Year of construction: 2008, GF Agie Charmilles AC Progress V4 CNC Wire Eroder with GF Agie Charmilles CNC Control & Pendant, 1200 x 800 Bed. Serial No. 72 (2008) Weight 6870kg. Country of Origin: Switzerland Hodpfx Aoy Idcxeagonl Location: This lot is located in Birmingham, UK. A charge of £550 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1320, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,080 mm, total length: 1,650 mm, total width: 2,225 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 400 mm, workpiece length (max.): 600 mm, table width: 400 mm, table length: 600 mm, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 220 mm, tank capacity: 600 l, Equipment: compressor, cooling unit, documentation/manual, fridge, For sale: SODICK CNC Wire EDM - Model: AQ325L LN 1W - Year: 2002 Hedsy Ib Ewopfx Aagjnl - Serial No.: 1320 The machine has been regularly maintained by BTS COMPANY d.o.o. and CELADA d.o.o.. It has been used for machining workpieces up to 5 kg and various toolmaking tasks. Due to its high precision, it can also be used as a measuring machine. It is connected to the electrical grid and ready for operation.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 0120, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, type of input current: three-phase, overall weight: 4,400 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 13 A, Equipment: documentation/manual, We offer this used AGIE AGIECUT EVOLUTION 3 wire EDM machine, year of manufacture 1998. Serial number: 0120 Machine list: C31001,8 Year of manufacture: 1998 Wiring diagram number: 627232,2 Weight: 4,400 kg Voltage: 3 x 400 V Frequency: 50 Hz Power: 9 kVA Rated current: 13.1 A Hnsdpfx Aasy Hfa Aogsl If you have any questions or require further information, please feel free to contact us by message or phone.

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 310 mm, Wire EDM machine Fanuc a-1iB Type A04B Year of manufacture: 2003 Technical data: x = 550 mm y = 370 mm z = 310 mm Hnsdpfx Aaey Hb T Ssgol Machining area approx. 550x400 mm Table load: 1,000 kg Rapid traverse x/y/z: 450-900 mm/min Machine weight: 3.0 t Space requirement (WxDxH) approx. 2.60x2.90x2.2 m electronic handwheel Additional photos available upon request.

Condition: used, Year of construction: 2006, Wire erosion / EDM Travel distance X: 570 mm Travel distance Y :370 mm Travel distance Z: 350 mm max. workpiece size X: 770 mm max. workpiece size Y: 520 mm max. workpiece size Z: 340 mm max. workpiece weight: 1000 kg table size X: 806 mm table size Y: 496 mm with AWF ( Automatic Wire Feeding ) U / V axis: 120 x 120 mm Hnsdpfxoy Egfks Aagol generator: 60 Ampere 3-sided rise and fall tank Linear drives on axes X, Y, U, V Linear scales on axes X, Y, U, V Automatic high-speed wire threading unit Ceramic components integrated in working table, Z axis quill, clamping block, wire guide Dielectric cooling controlled by thermostat 15" TFT colour monitor Max. matching current 60 A CNC power supply unit LQ33W

Condition: reconditioned (used), Year of construction: 2006, operating hours: 3,422 h, functionality: fully functional, machine/vehicle number: 214, workpiece weight (max.): 400 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 430 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! The machine was overhauled in 2025! The corresponding invoice is included. TECHNICAL DETAILS Maximum workpiece weight: 400 kg Travel X-axis: 500 mm Travel Y-axis: 350 mm Travel Z-axis: 430 mm Maximum wire diameter: 0.3 mm Table load: 400 kg Maximum workpiece height: 420 mm Positioning accuracy: 0.001 mm Hedpfx Aajy Ed E Isgsnl MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 17 A Voltage: 3 x 400 V Power: 12.1 kVA Rated current: 17.5 A Short-circuit current: 10 kA Total weight: 2,650 kg Operating hours: 17,800 h EDM hours: 3,422 h EQUIPMENT Wire alignment device

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2013 Travel ranges: X= 500 mm, Y= 350 mm, Z= 256 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Hedpfx Aey Ed Enoagjnl Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.33 mm (incl. KIT 50) Submerged-type machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes automatic wire changer AWC (use of 2 wire spools) Includes Conic-Plus option Includes Fast-Threading option Includes Smart-Threading option VISION 5 control system AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine has been thoroughly cleaned, overhauled, and extensively tested. A laser measurement of the axes was performed in-house. We are happy to carry out an individual test on the CUT 3000 for you. Including user training at Techma on your overhauled machine Optional services we offer: - Transport - Commissioning - Chiller - Clamping devices - Consumables

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 570 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 350 mm, total height: 2,000 mm, total width: 725 mm, wire diameter (max.): 0.33 mm, overall weight: 4,600 kg, number of axes: 5, wire diameter (min.): 0.15 mm, This 5-axis Sodick AQ537L wire EDM machine was manufactured in 2005. It features an X-axis travel of 570 mm, Y-axis travel of 370 mm, and Z-axis travel of 350 mm, along with a work table size of 806 x 496 mm. With a maximum workpiece weight of 1000 kg, this machine is designed for precision cutting. If you are looking to get high-quality wire EDM capabilities, consider the Sodick AQ537L machine we have for sale. Contact us for further details. • U: 120 mm • V: 120 mmTable / tank Hnjdpfsy D R Tcox Aagsl • Work table (W x D): 806 x 496 mm • Work tank (W x D): 1050 x 720 mm • Distance from floor to table top: 995 mmWorkpiece capacity • Max workpiece height: 340 mm (standard), 280 mm (submerged) • Max workpiece weight: 1000 kgWire system • Taper angle: ±25° / 100 mm • Wire tension: 3–23 N • Max wire feed speed: 420 mm/s • Max wire spool weight: 8 kgMachine dimensions / weight • Installation space (W x D): 3700 x 3900 mmDielectric tank • External dimensions (W x D x H): 725 x 2550 x 2000 mm • Empty weight: 600 kg • Capacity: 800 L • Deionizer: Ion-exchange resin (18-liter type) • Filtration system: 3 replaceable paper filters (internal-pressure type)

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, total height: 1,843 mm, total width: 1,970 mm, wire diameter (max.): 0.3 mm, overall weight: 4,200 kg, number of axes: 5, wire diameter (min.): 0.15 mm, This 5-axis Sodick AQ535L wire EDM machine was manufactured in 2007. It features an X-axis travel of 550 mm, Y-axis travel of 350 mm, and Z-axis travel of 300 mm. The work table size is 790 x 500 mm, with a maximum workpiece weight capacity of 800 kg. If you are looking to get high-quality wire EDM capabilities, consider the Sodick AQ535L machine we have for sale. Contact us for further details. • Axis travels: • U: 80 mm • V: 80 mm • Table / Tank: • Work table size (W x D): 790 x 500 mm • Work tank dimensions (W x D): 1100 x 720 mm • Distance from floor to table top: 1005 mm Hnedpfxoy D Rvdo Aagel • Workpiece capacity: • Maximum workpiece height: 290 mm (standard) / 270 mm (submerged) • Maximum workpiece weight: 800 kg (standard) / 680 kg (submerged) • Wire system: • Taper angle: 20° / 80 mm • Wire tension: 300 g to 2300 g • Max wire feed speed: 250 mm/sec • Max wire spool weight: 6 kg • Dielectric tank: • External dimensions (W x D x H): 640 x 2400 x 1843 mm • Empty weight: 350 kg • Capacity: 730 L • Deionizer: 10 L • Filtration system: 2 replaceable paper filters

Condition: ready for operation (used), Year of construction: 2006, operating hours: 37,021 h, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, total height: 2,220 mm, total width: 2,400 mm, wire diameter (max.): 0.33 mm, overall weight: 4,400 kg, controller manufacturer: AGIE, controller model: Software version 07.08.01., product length (max.): 2,800 mm, number of axes: 3, wire diameter (min.): 0.07 mm, This AGIE Agiecut VERTEX 3 Erosion machine was manufactured in the year 2006 in Switzerland and has 37021 erosion hours. It is equipped with an Agievision 5 Software version 07.08.01 control unit. • Control: Agievision 5 (software version 07.08.01) • Condition: Excellent; regular maintenance; major service recently completed; fully operational; can be tested under power • EDM operating hours: approx. 37,021 h • Travels (U/V): ±70 / 70 mm • Distance for clamping: 1,100 mm • Max workpiece dimensions: 1050 × 650 × 250 mm • Max workpiece weight: submerged 400 kg / non-submerged 800 kg • Max cutting height: up to 250 mm • Taper capability: ±30° / 100 mm • Positioning • Max manual speed: 2 m/min • Max programmable speed: 3 m/min • Resolution: 0.0001 mm • Geometric tolerances: per manufacturer specifications • Wire system • Wire diameter range: 0.07–0.33 mm (standard 0.20 mm) • Wire spool capacity: up to 25 kg Hsdpfx Aasy D N I Eogsnl • Wire tension: 0–25 N • Wire speed: 60–300 mm/s • Wire feed: semi-automatic • Wire disposal: chopper system • Equipment & features • Automatic wire threading system • Threading nozzles: 2 mm (optional 1 mm / 0.6 mm) • Combined wire guide system and cylindrical wire guide • Electronic handwheel (manual control) • Remote control with LCD display • TFT control screen (1024 × 768) • Keyboard and mouse control Dimensions Machine Depth 2800 mm

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, wire diameter (max.): 0.3 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis ONA U 400 wire EDM machine was manufactured in 2000. It features a table travel of 600 x 400 mm and a Z-axis travel of 400 mm, accommodating a maximum workpiece size of 1200 x 880 x 400 mm with a weight capacity of 850 kg. If you are looking to get high-quality wire EDM capabilities, consider the ONA U 400 machine we have for sale. Contact us for further details. • Auxiliary table travel (U/V): 80 x 80 mm • Maximum workpiece size (X/Y/Z): 1200 x 880 x 400 mm • Maximum workpiece weight: 850 kg • Taper cutting angle at 100 mm (Z): 18° • Maximum taper cutting angle: 30° • Wire characteristics (bare): Cu 63% / Zn 37% • Wire tensile strength: 900 N/mm² • Wire spool type: DIN 125 / DIN 160 Hnodpfx Aasy Dgrzjgel • Guide type: Closed diamond • Position resolution (X/Y/U/V): 0.001 mm • Minimum programmable increment: 0.001 mm

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 02DC2563, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, The machine will remain in operation until 08/04/2026! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 310 mm U/V-axis travel: 150 mm Max. workpiece weight: 1,500 kg Maximum workpiece dimensions: 1,050 x 820 x 305 mm Taper angle (workpiece height): 15 mm / 260 mm or 30 mm / 110 mm Table dimensions: 840 x 560 mm Possible wire diameters: 0.10 - 0.30 mm Wire spool capacity: 10 kg MACHINE DETAILS Dimensions & Weight Machine dimensions: 2,687 x 3,030 x 2,150 mm Machine weight: 3,500 kg EQUIPMENT Hjdpfx Aeyzh Dasagjnl Hardened 3-sided table

Condition: good (used), Year of construction: 2006, FOR SALE Mitsubishi FA20S Wire EDM Machine Technical Data: - Model: FA20S (High Performance Series) - Travel (X x Y x Z): 500 x 350 x 300 mm - U/V Axis Travel: ±32 mm - Maximum workpiece dimensions: 1050 x 800 x 295 mm - Maximum workpiece weight: 1,500 kg - Maximum taper angle: ±15° (over 100 mm height) Year: 2006 Included Equipment and Options: - Filtration system: TFA20SM dielectric fluid tank - Automatic wire threading (AT) for efficient unmonitored machining - Mitsubishi CNC with user-friendly interface - Generator featuring anti-electrolysis technology for improved surface integrity Key Advantages: This machine offers excellent thermal stability and high reliability. Furthermore, spare parts and consumables (guides, filters) are readily available on the market. Condition: Used machine in good overall condition. Please do not hesitate to contact me for further information or to discuss the price. BT MACHINES PURCHASE AND SALE ALL TYPES OF INDUSTRIAL EQUIPMENT Hnodpfx Asyzct Asagol ALL TYPES OF MACHINE TOOLS

Condition: like new (used), Year of construction: 2024, operating hours: 2,200 h, functionality: fully functional, workpiece weight (max.): 850 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,245 mm, total length: 3,445 mm, total width: 2,595 mm, wire diameter (max.): 0.3 mm, type of input current: three-phase, overall weight: 3,684 kg, input frequency: 60 Hz, Equipment: cooling unit, We are offering this Sodick VN 600Q wire EDM machine, year of manufacture 2024. Manufacturer: Sodick Hjdpfx Asyyy Disagenl Model: VN 600Q Year: 2024 Condition: like new The machine currently has 1,137 hours of cutting time and approx. 2,200 operating hours. • 10-year warranty on positioning accuracy • Linear motors (X, Y, U, V axes) • Absolute linear glass scales (X, Y, U, V axes) • Ceramic components • LN3W generator • Remote control • Enhanced operator-friendliness • Energy-saving circuit • Automatic water level control • Fixed Jet AWT with pop-up function • Heart NC software • Wire end remover • Dielectric cooling unit • Voltage stabilizer • LAN interface • USB port Further specifications for this machine: Travel (X/Y/Z axis, mm): 600 x 400 x 310 Travel (U/V axis, mm): 90 x 90 Max. workpiece weight (kg): 850 Table height from floor (mm): 1,000 Machine dimensions (W x D x H, mm): 2,595 x 3,445 x 2,245 Machine weight (kg): 3,684 Air pressure: 0.65 MPa, 30 NL/min Total power consumption: 11.5 kVA, 3 phase, 50/60 Hz Taper angle: ±15° (workpiece thickness: 120 mm) Wire diameter (mm): ø 0.1 ~ ø 0.3 mm Wire tension (N): 3 ~ 23 N Category ID: 1896 Type ID: 2593 Machine type: Wire EDM machine If you have any questions or require further information, feel free to send us a message or call us.