Wieland Hülsken Werkzeugbau KG

Condition: used, Year of construction: 2012, x-travel 635 mm y-travel 510 mm z-travel 460 mm control SLIMline Siemens turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 13 / 9 kW Torque 83 / 57 Nm tool taper SK 40 table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min rapid traverse 30 m/min total power requirement 17 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V Ecoline - only 9.290 Spindle-Hours Fjdpfx Aex S Rxnsdajft

Condition: repair required (used), Hyundai SPT-V30T machining centre with automatic tool changer. Powers on but does not start, servo error. Sold for repair or for parts. If you have further questions, we will be happy to assist. Ffedox S I Iaspfx Adast

Condition: used, Year of construction: 2012, operating hours: 5,991 h, functionality: fully functional, machine/vehicle number: 11415584024, For sale is a 5-axis CNC machining center DMG MORI DMU 50 from the year 2012, equipped with Siemens control. The machine is in good, well-maintained condition and was in operation until recently. A powered inspection can be arranged by appointment at any time. The DMU 50 is a vertical machining center with an integrated NC rotary/swivel table, ideally suited for precise 5-axis complete machining of complex workpieces. Typical areas of use include tool and mold making, the manufacturing of precision parts, as well as prototyping and small to medium batch production. Technical data (excerpt): Manufacturer: DMG MORI / Deckel Maho Model: DMU 50 Machine type: Vertical 5-axis CNC machining center Year of construction: 2012 Control: Siemens Number of axes: 5 simultaneous X-travel: approx. 500 mm Y-travel: approx. 450 mm Z-travel: approx. 400 mm Spindle: Vertical motor spindle, up to approx. 14,000 rpm Tool changer: automatic, approx. 30 tool positions Country of manufacture: Germany Working table Swiveling rotary table with simultaneous capability Control system 3D control Siemens 840D solutionline Main drive Spindle speed up to 14,000 rpm SK40 Ffedsx S D N Tspfx Adaet Tool magazine Tool magazine with 60 positions SK40 vertical chain Automation / Measurement / Monitoring Infrared probe TS649 DMG Direct measuring systems X/Y/Z Coolant / Chip disposal Coolant and compressed air switching Flush pistol for chip removal Siemens control options Electronic handwheel General options Operation mode 4 Second cabin door Special features Rotating viewing window (S-K3008) Operating hours (according to meter): Machine hours: approx. 5,991 h Spindle hours: approx. 10,489 h Condition & Scope of delivery: Used, fully functional, regularly in operation. Scope of delivery includes the machine as shown; further accessories available upon request. Other information: Location: Birkenfeld (75217)

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, For sale is a fully functional machining center of the Chiron type FZ 08 W. Ffedpfxjx Swg Ss Adast

Condition: good (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 380 mm, controller model: Siemens Shopmill, rotational speed (max.): 10,000 rpm, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, X-axis: 450 mm Y-axis: 350 mm Z-axis: 380 mm Fodox Stazepfx Adasft Table size: 700 x 320 mm Spindle speeds: 10.000 rpm Spindle nose: ISO40 Toolchanger: 12 pockets Controller: Siemens Shopmill Featured with: - Cooling unit - Chipconveyor - ISO40 tools - Machine Manuals Country of origin: Taiwan Motor power: 8,5 kW Machine LxWxH: 2450 x 1550 x 2200 mm Machine weight: 2000 kg

Condition: good (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 15,000 rpm, Fanuc Oi-MD CNC control electronical handwheel 24-fold tool changer coolant device chip conveyor Technische Daten / technical details: X-Weg / X-travel 450 mm Y-Weg / Y-travel 400 mm Ffsdpfxex Slbws Adajt Z-Weg / Z-travel 400 mm Spindelaufnahme / spindle taper SK40 Drehzahl / spindle speed 15000 UpM /rpm Eilgang / rapid feed 36 m/min Tischaufspannfläche / table clamping area 770x410 mm Werkzeugwechselmagazinplätze / number of tool places in changer 24 Antriebsleistung Spindel / drive capacity spindle 16 kW Gewicht ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2019, operating hours: 17,200 h, functionality: fully functional, machine/vehicle number: Fanuc RB-A, nominal power (apparent): 11 kVA, controller manufacturer: FANUC, rotational speed (max.): 10,000 rpm, overall weight: 2,300 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 13,600 h, number of spindles: 1, number of slots in tool magazine: 21, input voltage: 220 V, type of input current: three-phase, Equipment: chip conveyor, FANUC ROBODRILL α-D21iB5 Vertical Machining Center, year of manufacture 03/2019. Commissioned in 2020. Spindle speed: 10,000 RPM. Operating hours: 17,200 h, spindle hours: 13,600 h. The milling machine is equipped with a DDR-T 4th axis rotary table, two independent Schunk pneumatic vices, a Renishaw workpiece probe and tool probe, automatic front doors, automatic side doors, chip flushing system, high-capacity coolant tank, chip conveyor, and oil mist filter. The machine has been operated exclusively in our company since new. Condition: very good. The machine can be inspected in operation – it is still in daily use. Type: ROBODRILL α-D21iB5 Catalogue No.: A04B-0120-B133#BHB Serial No.: P193ZH375 Production date: 2019-03 Ffedpfx Adox Rqkuoajt Weight: 2,300 kg Power supply phases: 3 Voltage: 200-220 V Frequency: 50/60 Hz Power consumption: 11 kVA SCCR: 2.5 kA EMC class: EN55011 Group 1 Class A If you have any questions or require further information, please feel free to message or call us.

Condition: used, Year of construction: 2019, operating hours: 12,300 h, functionality: fully functional, machine/vehicle number: Fanuc RoboDrill B, nominal power (apparent): 11 kVA, overall weight: 2,300 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 21, input voltage: 200 V, type of input current: three-phase, FANUC Robodrill α-D21iB5 Vertical Machining Centre, year of manufacture 07/2019. Commissioned in 2021. Total operating hours: 16,000 h, machining hours: 12,300 h. Used exclusively in our company since new. The milling machine is equipped with a 4th axis DDR-t rotary table featuring two independent Schunk pneumatic vices, a tool probe and a Renishaw workpiece probe, chip flushing system, automatic front doors, oil mist extractor, chip conveyor, and a high-capacity coolant tank. The machine is in continuous operation. Inspection under power possible. Condition: very good. Type: FANUC ROBODRILL α-D21iB5 Serial number: A04B-01213B#B Year of manufacture: 2019-07 Weight: 2,300 kg (machine only) Power supply: 3~ Rated power: 11 kVA Supply voltage: 200–220 V Frequency: 50/60 Hz Fjdpfx Asx Rqfrodasft EMC standard: EN55011 EMC group: 1 EMC class: A SCCr (Short-circuit current rating): 2.5 kA If you have any questions or require further information, please send us a message or contact us by phone.

Condition: defective spare-parts repository (used), Year of construction: 1999, operating hours: 20,151 h, functionality: not functional, machine/vehicle number: 490-43, travel distance X-axis: 750 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, table width: 460 mm, table length: 1,150 mm, overall weight: 5,500 kg, spindle speed (min.): 7,200 rpm, number of slots in tool magazine: 20, The hydraulics are faulty and therefore the machine is no longer operational. The machine features a Siemens Sinumerik 840 M control unit and an SK 40 tool holder. The mineral cast machine bed ensures high thermal stability and damping. Possibly suitable for spare parts. Ffedex Rdyiopfx Adaet

Condition: used, Year of construction: 2008, Haas Super Mini MILL +4 axis Ffedpfsx Rcp Njx Adast

Condition: good (used), Year of construction: 2022, spindle speed (min.): 12,000 rpm, Machine type: CNC-BAZ vertical Model: M1 Pro with 4th axis including tailstock Manufacturer: DMGMORI Control: Siemens 828 D Year of manufacture: 2022 Location: Germany Technical data Travel range X-axis approx. 550 mm Y-axis approx. 550 mm Z-axis approx. 510 mm Table size approx. 850 x 650 mm Max. workpiece weight approx. 600 kg Max. speed approx. 12,000 rpm Spindle motor approx. 13/9 KW Number of tool positions approx. 24 Rapid traverse X / Y / Z approx. 24 m/min Holder taper approx. SK40 Footprint L x W x H approx. 3.1 x 2.7 x 2.9 m Machine weight approx. 5,600 kg Equipment Main spindle 12,000 rpm 13/9 kW - Separate electronic handwheel - 24-place chain magazine - SK40 - Coolant tank - IKZ pump 20 bar - Filter for coolant - Bed flushing switchable via M function - Coolant - Spray gun - Spindle blow air switchable via M function - Cabin roof - Measuring probe - 4th axis - Tailstock Fedpfjx Rbiuox Adaoft (Errors in the technical data and information excepted)

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1536000043E, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, total height: 2,500 mm, total length: 3,400 mm, total width: 2,500 mm, table length: 630 mm, table load: 300 kg, rotary table diameter: 630 mm, overall weight: 4,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 8,000 rpm, Machine is still powered on. Technical Specification: Travel distances X = 500 mm Y = 450 mm Z = 400 mm Swivel rotary table (B/C-axis) B-axis: -5° to +110° Fodpfx Aox N Swmsdasft C-axis: 360° (mostly indexed, partially simultaneous operation possible) Table Clamping surface: Ø 630 mm × 500 mm (round/square) Max. table load: 200 kg (for full 5-axis use; up to 300 kg horizontal) Main spindle Taper: SK 40 (DIN 69871) Speed: 20 – 8,000 rpm (standard for most 2012 Ecoline models) Power: 13 kW (40% duty cycle) / 9 kW (100% duty cycle) Rapid traverse & feed rate X/Y/Z: 24 m/min Tool magazine 20 positions Max. tool length: approx. 300 mm Max. tool weight: approx. 6–8 kg Control: Siemens SINUMERIK 840D (solutionline) with DMG SLIMline® 15" panel + ShopMill interface Machine weight: approx. 4,100 kg Dimensions: approx. 3,400 × 2,500 × 2,400 mm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 112447, travel distance X-axis: 520 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 360 mm, nominal power (apparent): 9 kVA, table width: 300 mm, table height: 50 mm, table length: 600 mm, rotational speed (max.): 10,000 rpm, overall weight: 1,800 kg, spindle speed (max.): 10,000 rpm, spindle nose: bt30, number of slots in tool magazine: 14, input voltage: 380 V, type of input current: three-phase, Due to duplicate equipment: Brother TC 229, conversational description, 14 tools in BT 30, 10,000 rpm. One tool-change fork is broken but still picks up tools. Currently in operation until sold. Very easy to operate, ideal for single parts or production runs, lightning-fast part setup. Engraving, tapping, milling, etc. Sold with chip tray and water pump. Ready to use but without tools, vises, or rotary table. Clean machine that works reliably every day. Loading on site possible. Ffsdpfx Asx N Ncyjdaot

Condition: ready for operation (used), Year of construction: 2007, operating hours: 16,611 h, functionality: fully functional, machine/vehicle number: 1060239, travel distance X-axis: 405 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 254 mm, controller manufacturer: Haas, overall weight: 2,000 kg, coolant supply: 3.5 bar, number of spindles: 1, input voltage: 400 V, Haas Super Mini Mill Model: Super Mini Mill Year of Manufacture: 2007 Haas FNC 14 SW Travel: X-axis: 405 mm Y-axis: 305.0 mm Z-axis: 254.0 mm Spindle speed: 10,000 rpm Spindle taper: SK40 / ISO 40 Tool changer: 10-position Coolant pump: M08 EXTRAS: HA5 C rotary axis, rigid tapping, 4th axis option. The machine is first-hand and has always been serviced at regular intervals. The machine is in very good condition with no defects. Inspection possible from 2026 in Solingen / NRW. Ffsdpfsx N D U Djx Adast

Condition: ready for operation (used), Year of construction: 2012, Main Drive Spindle speed range 12000 Tool taper HSK-A 50 Number of axis 3 Max payload Up to 5 kg Fjdpfsx Nr I Ejx Adaoft Movement X-Axis Movement 550 mm X-Axis Rapid Traverse 40 m/min Y-Axis Movement 320 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 360 mm Z-Axis Rapid Traverse 60 m/min Table Table load 500 kg Tools Max weight 5 kg The system consists of: 2 x CHIRON FZ 12 KW (2012) + 2 x Fanuc LR Mate 200iC (2011) + 2 x Fanuc M - 20iA (2011) + Waschstraße. It features a high-speed spindle with a maximum speed of 12,000 rpm and a rapid traverse speed of up to 60 m/min on the Z-axis. Each machine includes a 24-slot automatic tool changer and can handle a table load of up to 500 kg. Ideal for precision machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 1997, BAZ Fanuc Robodrill14 i XYZ: 500/380/300 8000 rpm Fanuc 16 M Accessories: 3 x face mill holders 4 x drill chucks 1 x MK2 holder 3 x collet holders 2 x 10 mm Weldon 3 x 6 mm Weldon 1 x CNC rotary table Fibro 150 Documentation Fjdpfxsx Ncv Tj Adajft

Condition: good (used), Mori Seiki SV-500/50 4 Axis Vertical Machining Centre with Mori Seiki MSC-501 CNC Control, Table Size 1100mm x 600mm, 40 Tool ATC, BT50 Spindle Taper, Cool Jet 70 - 30 DF High Pressure, Coolant Filtration Unit, Filtermist FX7002 Oil Mist Extractor, Spindle Speed Max 6000rpm, Renishaw Tool Probe Eye, Machine Weight 7800kg. S/No. 1864 Includes Various BT50 Spindle Tool Holders in ATC and Boxes Fsdpfx Adox Nap Djaeft

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements height 2390.1 mm Machine weight 2636 kg Control Unit Brand HURCO Ffedpfx Aex I S Rdodast Model WinMax Main Drive Spindle speed range 8000 rpm Number of axis 3 Movement X-Axis Movement 457 mm X-Axis Rapid Traverse 19 m/min Y-Axis Movement 356 mm Y-Axis Rapid Traverse 19 m/min Z-Axis Movement 356 mm Z-Axis Rapid Traverse 19 m/min Table Table load 250 kg Tools Number of index 16 Max weight 7 kg Max tool diameter 90 mm Max tool length 200 mm Type of tool holder CAT/BT 40 This 3-axis Hurco VM5i vertical machining center was manufactured in 2016. It offers robust construction and precision engineering, ideal for a variety of machining tasks. Consider the opportunity to buy this Hurco VM5i vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2011, Machine is in good working condition. Parts shown by hand not come. Ffjdpfxjx I Nr Eo Adast Toolholders will come without cutting tools.

Condition: used, Year of construction: 2005, Technical details: x-travel: 750 mm y-travel: 406 mm Fjdpfex Iwr Tjx Adasft z-travel: 508 mm weight of the machine ca.: 4 t bore spindle turning speed range: 12.000 U/min HAAS VF-2 is a 3-axis machining center designed for precision, high accuracy and reliability. *

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Fodpfxsx Iwg Ro Adasft Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 580 mm, Matsuura MAM72 – 35V (5 axis) CNC Machining Centre Year: 2006 Control: Matsuura G-Tech 16i Model: MAM72-35V Travels X/Y/Z: 550 / 440/ 580mm Travels B/C: +65 – 110 degrees / 360 degrees Ffodpsx H Aagefx Adaot Working Surface: 130mm dia. Max. Work Size: 350mm dia. x 300mm H Loading Capacity per pallet: 60 kg Spindle Speed: 15,000 RPM Spindle Taper: BT 40

Condition: good (used), Year of construction: 2017, operating hours: 35,000 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller model: SIEMENS 840 D Solution Line, number of spindles: 2, number of slots in tool magazine: 32, Equipment: chip conveyor, rotational speed infinitely variable, - Twin-spindle machining centre - 5 axes - Automatic tool changer with 2x 16 tool positions Further details available on request. Fjdpfx Aex E Sr Nsdasft

Condition: good (used), Year of construction: 2003, for sale Fehlmann Picomax 60 M Machining Centre Fsdpfx Asx E R Dkedajft year 2003 Specification: Machine type: Vertical CNC machining centre, 3 axes (expandable to 5) CNC control: Heidenhain iTNC 530 Travel (Stroke): X-axis (Longitudinal): 505 mm Y-axis (Transversal): 355 mm Z-axis (Vertical): 610 mm Table size: 920 mm x 380 mm Max spindle speed: 18,000 rpm or 20,000 rpm Spindle taper: SK 30 (or ISO 30) Tool magazine: 24 positions Machine weight: approx. 3,200 kg unplugged BT MACHINES PURCHASE AND SALE ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: ready for operation (used), Year of construction: 2005, Control Unit Brand HEIDENHAIN Model iTNC 530 General Data Machine weight 3600 kg Main Drive Spindle speed range 20 - 10000 RPM Spindle motor power 9 / 13 kW Tool taper SK 40 Number of axis 5 Movement X-Axis Movement 500 mm Y-Axis Movement 450 mm Z-Axis Movement 400 mm Additional Equipment Tool Positions: 16 / Max. Tool Weight: 6 kg / Max. Tool Length: 300 mm Fjdex E D U Ajpfx Adaoft Max. Tool Diameter: Without adjacent tools: 130 mm / With adjacent tools: 80 mm Total Power Requirement: 17 kVA No chip conveyor included / No automatic measuring probe included / No tools included This 5-axis DMG DECKEL MAHO DMU 50 vertical machining centre was manufactured in 2005. It features a Heidenhain iTNC 530 control, a main spindle speed range of 20 - 10,000 RPM, and a rotary table with a clamping surface of 630 x 500 mm. The machine has undergone significant overhauls, including a complete X-Axis bearing replacement and new coolant pump installation. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 machine we have for sale. Contact us for more information. Application Types Milling