DS Praha s.r.o

Condition: used, Parallel Lathe SCULFORT type MAXICAP SENIOR 380 x 4000 RN Between points: 4000 mm Maxi Ø on bench: Ø 780 mm Maxi Ø over saddle: Ø 580 mm (rear trolley dismantled) - Ø 500 mm (without rear trolley dismantled) Maxi diameter in brocken bed: Ø 1160 mm Width in brocken bed: 400 mm Spindle: Ø 80 mm Iodpfxjyarw He Ag Ustb Spindle speed: from 16 to 1280 RPM Square turret 3-jaws chuck Ø 400 mm Threadings: Metric + Withworth 3 points steady max Ø 350 mm Tailstock CM6 Motor power: 13 CV Feeds: auto transverse + longitudinal Clutch rapid used Lubricant tank Dimensions (L x W x H): 6500 x 1800 x 1900 mm Weight: approx 7 T

Condition: used, Year of construction: 1971, functionality: fully functional, Center distance: 2.000 mm turning diameter: 1.200 mm turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 max. width of the adjustable bed: 900 mm spindle bore: 85 mm turning rate: 14 - 710 U/min Iodpfx Asyaadhjg Ujtb dimensions: 4.705 x 2.060 x 2.000 mm equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, turning diameter over cross slide: 800 mm, spindle bore: 70 mm, turning diameter: 800 mm, turning diameter over bed slide: 510 mm, turning length: 2,750 mm, total length: 5,600 mm, total width: 1,400 mm, spindle speed (max.): 900 rpm, spindle speed (min.): 20 rpm, rotational speed (max.): 900 rpm, rotational speed (min.): 20 rpm, We offer this ready-to-use TOS Hostivař SU 80 A lead/traverse spindle lathe, year of manufacture 1980. Machine type: SU. 80 S A Main spindle power: 15 kW Main spindle speed range: 20–900 min⁻¹ Longitudinal feed range: 0.09–0.90 mm/rev Cross feed range: 0.05–0.50 mm/rev Itsdpfsx Uymtsx Ag Ujb Metric thread range: 0.1–22 mm/rev If you have any questions or need further information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2013, Centre height: 330 mm Itedpfx Ajx Ux D Deg Ujb Centre distance: 2000 mm Spindle bore diameter: 103 mm Max. turning diameter over bed: 660 mm Max. turning diameter over carriage: 420 mm Spindle speed range: 36 – 1600 rpm (12 steps) Spindle nose: ISO 702/II No. 8 Longitudinal feed range: 0.063 – 2.52 mm/rev (65 steps) Cross feed range: 0.027 – 1.07 mm/rev (65 steps) Metric threads: 1 – 14 mm (22 steps) Inch threads: 28 – 2 TPI (25 steps) Module threads: 0.5 – 7 mm (18 steps) Diametral pitch: 56 – 4 DP (24 steps) Motor power: 7.5 kW Weight: 3200 kg Dimensions: 3635 x 1050 x 1450 mm

Condition: good (used), Year of construction: 2007, Manufacturer: Volz BMT Year of manufacture: 2007 Control: conventional with digital readout (DRO) Country of origin: Taiwan Ijdox Uw S Hjpfx Ag Uotb Swing diameter: 660 mm Max. turning length: 2000 mm Spindle bore: 85 mm Spindle mount: D1-8 Spindle motor: 7.5 kW Spindle speed: 17–1200 rpm with steady rest with digital readout (DRO) with thread cutting function

Condition: good (used), functionality: fully functional, spindle bore: 110 mm, turning length: 3,000 mm, total length: 6,000 mm, total width: 1,400 mm, total height: 2,000 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 9 rpm, overall weight: 8,000 kg, HEIDENREICH & HARBECK HAMBURG 540 lead and feed screw lathe Itedpfxsx Tz T So Ag Usb - Center height over bed: 300 mm - Swing diameter over bed: 600 mm - Center height over carriage: approx. 200 mm - Swing diameter over carriage: approx. 400 mm - Includes tailstock, a Multifix tool holder, and a three-jaw chuck, diameter: 310 mm - Includes a two-axis digital readout by SONY and a steady rest, steady rest diameter: approx. 200 mm Attention: The item must be collected, bindingly, between 18 and 26 February 2026 on a date to be agreed. FCA D-78087 Mönchweiler – loaded onto truck

Condition: good (used), Year of construction: 2005, Ref. -No.: 10314 Manufacturer: PINACHO Type: S-90/ 310-155 Year of construction: 2005 Type of control: Konventionell Storage location: Halberstadt Country of origin: Spain Bar passage: 90 mm Travel quill: 180 mm Turning Diameter: 630 mm Turning Length: 3000 mm Turning Diameter Over Bed: 620 mm Tip length: 3000 Itedsx Sw Dqepfx Ag Uob Cross Movement. (X-Axis): 365 mm Spindle Bore: 155 mm Tailstock Quill Diameter: 72 mm Turning diameter over cross slide: 880 mm Jaw chuck diameter: 380 mm Turning Speed Range: 16 - 750 rpm Further information: - The lathe has two jaw chucks on the headstock - metric, Whitworth and inch trapezoidal threads can be turned - adjustable feeds for cross face and longitudinal face turning (0.05 to 1.5 mm/u)

Condition: used, total length: 4,500 mm, total width: 1,600 mm, total height: 1,500 mm, Empty weight: 5.000 kg Price: On request - Documentation available: No - CE certificate present: No - Serial number: 0440922 - Drive system: Conventional - Power [kW]: 18.5 - Centre height [mm]: 315 - Swing over bed [mm]: 630 Itodex Ryv Tepfx Ag Uob - Carriage turning diameter [mm]: 400 - Distance between centres [mm]: 3000 - Bed width [mm]: 580 - Spindle bore [mm]: 82 - Min. spindle speed [rpm]: 9 - Max. spindle speed [rpm]: 1120 - Options: Three-jaw chuck, Four-jaw chuck - Transport dimensions: 4500mm x 1600mm x 1500mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, turning diameter over bed slide: 630 mm, turning length: 3,000 mm, Swing diameter over bed 655 mm Ijdox N Iq Nepfx Ag Ustb Swing diameter over support 390 mm Turning length 5000 mm Spindle bore 82 mm Spindle speed 9-1120 rpm Feed rate 0.049-3 mm/rev Total connected load 12 kW

Condition: ready for operation (used), Year of construction: 1984, spindle bore: 81 mm, center height: 315 mm, center width: 2,000 mm, overall weight: 3,100 kg, Heidenhain 2-axis digital readout, external electrical cabinet, capacity 2000x725 mm, spindle bore 81 mm, multifix turret, steady rest Iodpsx H Sdnjfx Ag Uetb

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 390 mm, spindle bore: 116 mm, turning diameter: 635 mm, turning diameter over bed slide: 390 mm, turning length: 2,000 mm, Used lathe in very good condition, including a 400 mm 3-jaw chuck, 1 x steady rest and a Multifix toolholder. Itjdpfx Aox Eln Rog Usb Technical specifications: Turning length: 2000 mm Swing over bed: 630 mm Swing over cross slide: 390 mm Swing in gap: 900 mm Spindle bore diameter: 116 mm Total weight: 4230 kg Chuck mounting: D1 11 in. Camlock Morse taper: No. 6

Condition: like new (used), Center height over bed: 330 mm, max turning diameter over carriage: 408 mm, max turning diameter over bed: 640 mm, max turning diameter in gap: 899 mm, distance between centers: 2000 mm, variable spindle speed, rpm: 18-1500, spindle bore diameter: 105 mm, spindle nose: ASA 11”, tailstock: MT5, quill diameter: 90 mm, travel: 250 mm. cross slide travel: 275 mm. main motor: 15 hp. machine weight: 3450 kg. Iedpfex Dikkox Ag Uetb

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 700 mm, turning length: 6,000 mm, spindle motor power: 30 W, The lathe is in good technical condition, connected and ready for testing. It features digital readout, faceplate, and steadies. Specifications: Swing diameter over bed: 1,090 mm Distance between centers: 6,000 mm Swing diameter over cross slide: 700 mm Main drive motor power: 30 kW Dimensions (L x W x H): 8,200 x 1,800 x 1,855 mm Machine weight: 11,000 kg Itsdpfxsx A S Sbe Ag Ujb

Condition: used, Year of construction: 1991, total length: 5,200 mm, total width: 1,700 mm, total height: 1,400 mm, Empty weight: 4.500 kg Price: On request - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 4411T - Drive system: Conventional - Centre height [mm]: 355 - Swing over bed [mm]: 710 - Carriage turning diameter [mm]: 350 - Distance between centres [mm]: 3000 - Bed width [mm]: 510 - Spindle bore [mm]: 75 - Min. spindle speed [rpm]: 25 - Max. spindle speed [rpm]: 1250 - Options: Fixed steady, Four-jaw chuck, Quick-change tool post, Three-jaw chuck - Transport dimensions: 5200mm x 1700mm x 1400mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 2 Itsdjx A H Ahspfx Ag Uob Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 630 mm, LATHE TECHNICAL SPECIFICATION – PERFORMANCE OVERVIEW Workpiece Capacity Turning diameter over bed (nominal / max): 630 mm / 660 mm Itsdsx Acpdopfx Ag Ueb Turning diameter over carriage: - Short slides: 400 mm - Long slides: 320 mm Max. swing in front of faceplate notch: 720 mm Notch length: 265 mm Over bed: 305 mm Over floor: 1125 mm Machine Construction & Spindle System Bed width: 550 mm Spindle bore: 72 mm Faceplate: - Diameter: 630 mm - Width: 120 mm Tooling & Setup Tool cross-section (cutter): 40 × 40 mm Tool holder side length: 200 mm Spindle & Drive Performance Main motor speed: 1400 rpm Spindle speed steps: 18 Max. permitted faceplate speed: 560 rpm Feed Ranges Longitudinal feeds: - Steps: 68 - Range: 0.035–10 mm/rev Cross feeds: - Steps: 68 - Range: 0.014–4 mm/rev Rapid Traverse Rates Longitudinal: 5000 mm/min Cross travel: 2000 mm/min Thread Cutting Capability Metric threads: - 84 types, 0.2–224 mm Inch threads: - 94 types, 140–1/8 TPI Module threads: - 72 types, 0.1–112 Pitch range: - 94 types, 280–1/4 Machine Dimensions Overall length: 2300 mm + distance between centers Width: 1850 mm Height: 1725 mm Ask for a testing video! Robust and precise heavy-duty lathe featuring wide turning capacity, extensive thread cutting options, and high feed/rapid traverse performance. Ideal for demanding workshops requiring versatility, power, and reliability.

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 440 mm, spindle bore: 105 mm, turning diameter: 660 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, Travis lathe model T 26120A/3000, with 3,000 mm between centers, swing over bed 660 mm, over cross slide 440 mm, swing in gap 900 mm, spindle bore diameter 105 mm, 16 speeds from 25 to 1600 rpm, equipped with fixed and traveling steady rests, fitted with a 3-jaw chuck of 250 mm diameter, motor power 12 HP, weight 3,850 kg, overall in good condition. Iedpfx Agsxytpvs Ustb

Condition: good (used), Code: 0242 Brand: MVM - ITALY Model: T 1500 - CE Standard Professional wood turning lathe with copying device for wood, plaster, composite materials and various - CE Standard Technical data: Single-phase motor 220 Volt - Kw 2,5 Copying device: the copying device is a unit mounted on the rear bench. It can reproduce weather with wooden samples or with metallic templates thanks to its modern view. It is a practical and manageable tool, it permits large time saving, in batch production or mass production, too. The feed is given by a confortable wheel rotation, the wheel is mounted on the machine fore side Distance between centres mm 1500 Height of centre mm 220 Tool support Spindle revolutions 4 speeds Spindle cone n° 2 Counter centre n° 3 Overall dimensions mm 2350 x 650 x 1200 h Weight kg 325 Iodpfx Aoxykwksg Uotb

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 490 mm, spindle bore: 155 mm, center height: 400 mm, turning length: 3,000 mm, spindle speed (max.): 1,250 rpm, spindle speed (min.): 6 rpm, bed width: 700 mm, Turning diameter in gap: 1,050 mm, rotational speed (max.): 1,250 rpm, overall weight: 7,500 kg, three-jaw chuck diameter: 630 mm, ZMM Lathe CU800x3000, 2011, very little used, in excellent condition Specifications: Swing over bed: 890 mm Iedsxyf Ecepfx Ag Ujtb Distance between centers: 3000 mm Spindle bore: 155 mm Bed width: 700 mm Spindle speed: 6.3–1250 rpm Weight: approx. 7500 kg Compliant with ARBO/CE Machine equipped with: • 2-axis digital readout • BISON 3-jaw chuck 630 mm • BISON 4-jaw independent chuck 800 mm • 2 x fixed steady rests with roller fingers • 1 x travelling steady rest • Electrically adjustable tailstock • Tool post with 4 holders • Coolant system • Machine lighting

Condition: used, Year of construction: 1996, functionality: fully functional, turning diameter: 710 mm, turning length: 3,000 mm, Universal lathe FAT Poland Itedpsxxm A Hofx Ag Ujb Model: TUR 710 x 3000 Year of manufacture: 1996 Accessories: Digital readout 3-jaw chuck Tool holder Steadies Live centre

Condition: new, Bernardo Universal Lathe Titan 660 x 3000 Technical Specifications Distance between centers: 3000 mm Center height: 330 mm Swing over bed: 660 mm Swing over gap: 900 mm Swing over cross slide: 460 mm Bed width: 400 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1-8 Speed range: (16) 25 - 1600 rpm Longitudinal feed range: (25) 0.044 - 1.48 mm/rev Cross feed range: (25) 0.022 - 0.740 mm/rev Metric threads: (54) 0.45 - 120 mm Inch threads: (54) 7/16 - 80 TPI Tailstock quill diameter: 90 mm Tailstock quill travel: 235 mm Tailstock taper: MK 5 Motor power: 7.5 kW (10.0 HP) Itjdpfx Agoxxayfe Usb Machine dimensions (W x D x H): 4630 x 1200 x 1520 mm Approx. weight: 3300 kg Features • Versatile use in general mechanical engineering, production, single-part manufacturing, etc. • Central, user-friendly control for feeds and threading with leadscrew and feed shaft • Prism bed made of cast iron, inductively hardened and precision ground • Modern main spindle bearings with precision angular contact roller bearings • Hardened and ground gears and shafts, also in the feed gearbox • Rapid traverse longitudinal and cross as standard to reduce non-productive times • Large spindle bore (105 mm) for machining workpieces with large diameter • Smooth start-up via mechanical multi-plate clutch • Electromechanical foot brake to reduce non-productive times • Optimal cutting performance even during facing operations • Bed reinforced with robust ribs to stiffen the guideway and minimize vibration influences Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • Slip clutch • Rapid traverse longitudinal and cross • LED machine light • 3-jaw steel chuck PO3-315 mm / D8 • Face plate 450 mm • Fixed steady rest – through hole diameter max. 180 mm • Travelling steady rest – through hole diameter max. 120 mm • 2 live centers • Motor with magnetic brake to CE standard • Foot pedal with brake function to CE standard • Initial filling with Shell Tellus 46 • Coolant system • Quick-change tool post with 4 holders • Safety device for quick-change tool post • Change gears • Reducing sleeve • Chip guard rear panel • Cable management via energy chain • Operating tools

Condition: new, Bernardo Production Lathe Goliath 660 x 3000 incl. 3-Axis Digital Readout Technical Specifications Centre distance: 3000 mm Centre height: 330 mm Swing over bed: 660 mm Swing over gap*: 870 mm Swing over cross slide: 420 mm Bed width: 400 mm Spindle bore: 105 mm Spindle mounting: DIN 55029, D1-8 Speed range (16 steps): 36 – 1600 rpm Longitudinal feed range (65 steps): 0.063 – 2.52 mm/rev Cross feed range (65 steps): 0.027 – 1.07 mm/rev Metric threads (22): 1 – 14 mm Inch threads (26): 2 – 28 TPI (G/1") Quill diameter: 75 mm Quill travel: 150 mm Quill taper: MT 5 Motor power: 9.0 kW (12.0 HP) Machine dimensions (W x D x H): 4500 x 1280 x 1650 mm Approx. weight: 3990 kg * Removable bed gap: 240 mm Features • Versatile applications in general engineering, production, single-part manufacturing, etc. • The one-piece cast machine bed offers extremely high rigidity and low vibration, fulfilling a key requirement for precision turning • Modern headstock bearing with precision angular contact ball bearings • Central, user-friendly control for feeds and threading, with lead and feed screws • Rapid traverse (longitudinal and cross) as standard to minimize non-productive times • Large-dimensioned, hardened, and precision-ground gears • Removable gap bridge enables machining of large-diameter workpieces • Adjustable tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Electromechanical foot brake to reduce non-productive times • Excellent machining performance even during facing operations Itsdpfjxxaxnex Ag Ujb Scope of delivery • Slip clutch • Rapid traverse (longitudinal and cross) • LED machine lamp • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-315 mm / D8 • Face plate 630 mm • Fixed steady rest – max. bore diameter 250 mm • Travelling steady rest – max. bore diameter 110 mm • 1 live centre / 1 revolving centre • Motor with magnetic brake according to CE standard • Foot pedal with brake function to CE standard • Factory fill with Shell Tellus 46 • Coolant device • Quick-change toolpost with 4 holders • Safety guard for quick-change toolpost • Reducing sleeve • Chip guard (swarf back panel) • Operating tools

Condition: excellent (used), Mostana 1M65 x 5000mm Centre Lathe Iedpfx Agsxwkvhj Uotb Year 1991 Serial Number 3892 Distance Between Centres 5000mm Swing Over Bed 1000mm 3 Point Steady Sliding Chuck Guard Tailstock Power feed to compound

Condition: good (used), Centre height: 360 mm Centre distance: 5000 mm Swing diameter over bed: 720 mm Swing diameter over cross slide: 560 mm Swing diameter in gap: 1000 mm Spindle bore: 82 mm Speed range: 16 - 800 rpm Bed width: 445 mm Ijdoxtu Duepfx Ag Ujtb Tailstock taper: MT 6 Drive power: 11 kW Dimensions (L x W x H): 6750 x 1500 x 1700 mm Weight: 6500 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2025, functionality: fully functional, spindle bore: 105 mm, turning length: 2,000 mm, Brand new TMD 66/2000 series by MultiMasz comes with the same standard equipment, as liste below. However, our customers can always rely on customizing the machine and adding the necessary components and attachments to fully unlock its capabilities. Lathe in the video is additionally equipped with: Quick-change tool post (Multifix) Taper turning attachment Grinding attachment TECHNICAL PARAMETERS Turning diam. over bed [mm] 660 Turning diam. over support [mm] 400 Turning diam. over the gap [mm] 870 Max workpiece lenght in the gap [mm] 240 Turning between the centres [mm] 2000 Bed width [mm] 390 Max tool top size [mm] 25×25 Max distance from the tool post to spindle axe [min] 265 Max travel of cross slide [mm] 295 Max travel of saddle [mm] 145 Distance from the spindle axe to the bed surface [mm] 330 Distance from the spindle axe to the shelf of the tool post [mm] 25 Spindle rotation range [rpm] 36-1600 [12] Spindle bore [mm] 105 Spindle taper MT6, fi 113mm, 1:20 Metric threads range 1-14 [22] Inch threads range 2-28 [25] Module threads range 0,5-7 [18] DP threads range 4-56 [24] Max travel of the tailstock sleeve [mm] 150 Tailstock sleeve taper MT5 Tailstock sleeve diameter [mm] 75 Main motor power [kW] 7,5 Rapid travel motor power [W] 300-370 Coolant pump motor power [W] 120 Width [mm] 1100 Height [mm] 1600 Lenght [mm] 3200 / 3700 Iedpfx Aoxqf D Hsg Ustb STANDARD EQUIPMENT: Digital readout system (DRO) for 3 axes based on optical scales 3-jaw chuck Ø 315 mm with driving plate 4-jaw chuck Ø 400 mm with driving plate Steady rest Ø 20-120 mm Follow rest Ø 20-80 mm Safety guards (chuck, tool post, lead screw and driving shafts) Reduction sleeve 110/6 Dead centre 6 i 5 Lighting and cooling system Tool box We guarantee spare parts availability for 10 years from the date of purchase and provide expert technical support for the full lifetime of your machine. Other new lathes you can find on our website. More info on request.

Condition: excellent (used), Voest DA 180 Voest Alpine DA 180 Conventional Lathe with Digital Readout, Year of Manufacture 1981, in Very Good Original Condition The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: VOEST ALPINE Lathe Lead and feed screw lathe, Type DA 180/1, Year of Manufacture 1981 Swing over bed: 380 mm Swing over cross slide: 185 mm Turning length: 1,000 mm Centre height: 180 mm Bed width: 330 mm Spindle bore: 52 mm Tailstock taper: MK 4 Coolant system Motor: 380 Volt, 5.5 kW 12 spindle speeds: 44 - 2,000 rpm 66 longitudinal feeds: 0.072 - 4.038 mm/rev 66 cross feeds: 0.036 - 2.019 mm/rev 66 metric threads: 0.5 - 28 mm 66 inch threads: 1 - 32 TPI 66 module threads: 0.25 - 14 66 DP threads: 2 - 112 3-jaw chuck Weight approx. 1,200 kg Accessories and Equipment: Ijdpsxp I D Tofx Ag Ustb 1 piece Röhm 3-jaw chuck 200 mm Multifix size B Digital readout About the Machine: We offer a Voest Alpine DA 180 conventional lathe with digital readout, year of manufacture 1981, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The Voest also runs very quietly, even at high speeds. This newer generation of lathes is very operator-friendly and can produce grind-finish-quality surfaces. Take the opportunity to inspect this machine under power at our premises and see its condition for yourself. You can find further drilling machines from reputable manufacturers on our website.