Ron Mack Machinery

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, overall weight: 15,800 kg, Equipment: CE marking, documentation/manual, COLGAR PRESS BRAKE Model: 4000x200T Year: 2003 Axes: 6 + Back gauge table Control: CYBELEC 1200/B Complete documentation available. Bjdjzx T D Repfx Ac Tjwt

Condition: excellent (used), Year of construction: 1997, power: 30 kW (40.79 HP), pressing force: 320 t, EHT VARIOPRESS 320-35 hydraulic press brake for sale 3550mm 320t Type: VARIOPRESS 320-35 Year of manufacture: 1997 Dimensions Total length: 6100 mm Total width: 4350 mm Total height above floor level: 4230 mm Depth below floor level: 750 mm Working length: 3550 mm Distance between machine columns: 3050 mm Column projection: 400 mm Stroke: 590 mm Table distance: minimum: 760 mm maximum: 1350 mm Maximum pressing force: 3200 kN Bodpfx Aszx Sg Doc Towt No-load speed: max. 100 mm/s Pressing / bending speed: max. 10 mm/s Return speed: max. 100 mm/s Weight: 25,000 kg Maximum hydraulic system pressure: 280 bar Maximum pneumatic system pressure: 6 bar Hydraulic oil tank volume: 500 liters Power supply: 3 × 400 V / 50 Hz / 100 A Power: 36.5 kW Main motor power: 30 kW

Condition: good (used), operating hours: 4,313 h, power: 22 kW (29.91 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 6,100 mm, throat depth: 300 mm, distance table to ram: 500 mm, clearance between the columns: 5,500 mm, oil tank capacity: 350 l, overall weight: 26,000 kg, Max. pressing force: 320 t Bending length: 6100 mm Distance between uprights: 5500 mm Control system: MNC 95 c Maximum ram stroke: 250 mm Max. distance table/ram: 500 mm Overhang: 300 mm Table width: 250 mm Closing speed: 80 mm/s Bjdpfxozxxu Ij Ac Tswt Working speed: 7 mm/s Return speed: 70 mm/s Oil capacity: 350 l Operating hours: 4312 h Voltage: 380 V / 50 Hz Total power consumption: 22 kW Machine weight approx.: 26 t

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, operating hours: 26,000 h, power: 34 kW (46.23 HP), pressing force: 400 t, stroke length: 365 mm, operating speed: 9 mm/s, reverse speed: 90 mm/s, clearance between the columns: 4,600 mm, total length: 6,130 mm, total width: 2,995 mm, total height: 3,680 mm, overall weight: 36,700 kg, Press brake BYSTRONIC - Xpert 400 MACH-ID 9798 Make: BYSTRONIC Type: Xpert 400 Control: MMC-Bend Year: 2010 HA4 backgauge X, R, Z1 and Z2 WILA NewStandard Top Tool clamping Power on Hours 26.000 H PILZ Laser safe  2 x Arm on front 1000 mm Max. bending length: 5100mm Distance between column: 4600mm Max. pressing force: 400T Dis. Beam - Table: 650mm Beam stroke: 365mm Table Width: 280mm Troth beam: 410mm Bsdezxq Erjpfx Ac Tewt Approch speed: 120mm/min. Working speed: 9mm/min. Return speed: 90mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1, Y2, X, R, Z1, Z2 Control: MMC BYBEND 7.7.0.0 Crowning: Yes Hydraulic toolclamping: Wila New Standard Power: 34kW Length: 6130mm Width: 2295mm Height: 3680mm Weight: 36700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2012, machine/vehicle number: 7363126525, Offer 26697 Technical data: - Pressing force: 320 t - Working width: 3050 mm - Distance between the uprights: 2550 mm - Overhang: 460 mm - Installation height: approx. 630 mm - Stroke: 365 mm - Motor power: approx. 37 kW - Space requirement: approx. W 5700 x H 3250 x D 2450 mm - Weight: approx. 17500 kg - Including: - Swivel arm – control panel with control system - CYBELEC EVA-10S; Y1 + Y2; X, R, Z - Motorized back gauge - Motorized crowning - Safety light curtain - Electric foot pedal - 4-part universal die, split Bwjdpfxjzvmqfj Ac Tst - V-dies - Split upper tool set, various other tools

Condition: used, Year of construction: 2007, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 400 t, stroke length: 355 mm, operating speed: 110 mm/s, reverse speed: 110 mm/s, table length: 4,100 mm, throat depth: 410 mm, distance table to ram: 550 mm, total length: 5,800 mm, total width: 2,500 mm, total height: 3,800 mm, overall weight: 30,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, COLGAR SYNCHRONIZED PRESS BRAKE, PIS SERIES, WITH DOUBLE VARIABLE DISPLACEMENT PUMP: FLOOR-MOUNTED INSTALLATION BENDING LENGTH: 4100 MM CAPACITY: 400 TONS AXES: Y1-Y2-X1-R1-Z1-X2-R2-Z2 WITH ANTHROPOMORPHIC REGISTER CNC CYBELEC, COLOR VIDEO GRAPHIC, MODEL MODEVA 10S AIR-CONDITIONED ELECTRICAL CABINET WILA CENTERING TABLE AUTOMATIC PUNCH AND DIE CLAMPING SYSTEM SET OF TOOLS INCLUDED Bwjdpfx Ajzvb Rtsc Tet

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Press force: 300 t Bending length: 4050 mm Bwedpszt R A Hefx Ac Tst Distance between uprights: 3550 mm Control system: EHT EPS D01-3D Total power requirement: 30 kW Machine weight (approx.): 24,000 kg Machine height: 3.60 m Operating hours (approx.): 12,000 h Accessories/Equipment: Rear back gauge system, 5-axis Travel range and back gauge area Travel range X-axis: 600 mm Max. back gauge range in X: 1000 mm Travel range X1-axis: ± 125 mm Travel range R-axis: 200 mm Travel range Z-axis: 3150 mm Accuracy Positional deviation of the axes X-axis: 0.02 mm X1-axis: 0.02 mm R-axis: 0.05 mm Z-axis: 0.05 mm Speeds X-axis: 1200 mm/s X1-axis: 300 mm/s R-axis: 200 mm/s Z-axis: 1200 mm/s

Condition: good (used), Year of construction: 2023, power: 30 kW (40.79 HP), pressing force: 320 t, stroke length: 350 mm, table length: 6,050 mm, clearance between the columns: 5,100 mm, total length: 7,000 mm, total width: 2,300 mm, total height: 3,200 mm, overall weight: 22,500 kg, Press force: 320 t Bending length: 6050 mm Distance between uprights: 5100 mm Stroke: 350 mm Installation height: 650 mm Total power requirement: 30 kW Machine weight (approx.): 22,500 kg Space requirement (approx.): 7000x2300x3200 mm Bodpfx Acozr U S Ae Tjwt Accessories/Equipment: - ESA S 875 PC control system - 4 support arms in front of the machine - 4 stop fingers - Light curtain in front of the machine - Foot switch

Condition: ready for operation (used), functionality: fully functional, pressing force: 500 t, table length: 7,000 mm, sheet thickness (max.): 10 mm, We are offering for sale two edge bending presses from the renowned Lotze brand, designed for demanding bending tasks. Bodpfeznwt Uox Ac Towt The set includes a press with a bending length of 7000 mm and a pressure of 500 tons, and another with a bending length of 6000 mm and a pressure of 400 tons. After proper configuration, the machines can operate in tandem, which increases efficiency for larger projects. The set includes punches and dies, and the maximum thickness of the material to be bent at full length is 10 mm, while maintaining an appropriate bending radius. It is possible to purchase one of the two presses separately: price PLN 380,000. This is an excellent offer for companies looking for reliable, high-power presses with a wide range of applications.

Condition: used, Year of construction: 2000, total length: 4,100 mm, total width: 1,900 mm, total height: 3,000 mm, Colour: Blue Weight: 20.000 kg Price: On request - Year: 2000 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 80960 - Drive system: CNC - Power [kW]: 22.5 Bsdpezmaa Iefx Ac Towt - Press force [ton]: 300 - Max. working width [mm]: 3600 - Column gap [mm]: 3100 - Throat depth [mm]: 500 - Backgauge depth [mm]: 850 - Max. stroke [mm]: 250 - Tools included: Yes - Transport dimensions: 4100mm x 1900mm x 3000mm (l x w x h) - Transport weight [kg]: 20000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: 320-35, functionality: fully functional, pressing force: 320 t, table width: 3,550 mm, Equipment: documentation/manual, EHT-VARIOPRESS 320-35 edge bending machine for sale. Year of manufacture: 1997 Bending width: 3,550 mm Bwsdezl N D Tepfx Ac Tet Pressing force: 320 tons Condition: operational Control system: Cybelec Upper tooling is incomplete.

Condition: excellent (used), Year of construction: 2011, operating hours: 32,000 h, pressing force: 400 t, Equipment: CE marking, safety light barrier, High-Quality Used Bystronic XPERT 400x4100 CNC Hydraulic Press Brake For Sale Bwjdpfxjzl D Efo Ac Tot Overview Available for immediate acquisition is a premium, Swiss-manufactured Bystronic XPERT 400x4100 CNC Hydraulic Press Brake. This down-stroke bending and folding machine is in exceptional condition, meticulously maintained, and fully prepared for heavy-duty precision fabrication. Key Technical Specifications: Manufacturer: Bystronic Model: XPERT 400X4100Bending Capacity: 400 Tonnes Bed Length: 4100 mm (4.1 Metres) Configuration: Extended daylight and extended stroke for versatile, large-capacity component handling Condition and Maintenance: Status: Excellent operational condition ("Very Clean") and in full working order. Service History: This machine has been fully serviced directly by Bystronic UK, ensuring adherence to original manufacturer standards and peak performance reliability. Control System: Equipped with a modern, high-precision Swiss-made Bystronic MMC Control for streamlined programming and operation.

Condition: refurbished (used), Year of construction: 1993, machine/vehicle number: 20658, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 4,800 mm, table height: 980 mm, throat depth: 305 mm, ram plate length: 4,500 mm, distance table to ram: 500 mm, clearance between the columns: 3,760 mm, oil tank capacity: 350 l, total length: 6,300 mm, total width: 2,300 mm, total height: 3,475 mm, overall weight: 22,500 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hydraulic press brake LVD PPI 320/40 S840W Year of manufacture: 1993 Year of refurbishment: 2026 Serial number: 20658 Technical specifications: Force: 3200 kN Working length: 4500 mm Distance between uprights: 3760 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 305 mm Table width: 250 mm Approach speed: 80 mm/s Bwedpfx Ajzktg Ajc Tjt Working speed: 7 mm/s Return speed: 70 mm/s Weight: 22500 kg Motor: 22 kW Oil capacity: 350 l Dimensions (L x W x H): 6300 x 2300 x 3475 mm New 2026 S840W controller • S840W: 15” touch screen – Graphic controller with free online service assistance • Axes: Y1, Y2, X, V • V: CNC crowning table • 2 front supports • Hydraulic clamping of the top tool in LVD classic 15 tool holder Tooling included: E15 H150 78° L3000mm D15 H150 78° L4500mm F15 H150 26° L4500mm H15 H150 L2500mm R15 H150 78° L4500mm V20 H130 30° L3500mm V20 H130 78° L3000mm V40 H130 78° L4500mm V60 H130 78° L4500mm V90 H130 78° L2500mm M130 Multi-V L4500mm (90/40/24/16/10)

Condition: new, Year of construction: 2026, Three-axis CNC-controlled hydraulic press brake with servo drives + manual crowning system Bsdpfxszhi Udj Ac Towt Axis - Y - (press beam up and down) Axis - X - (back gauge - forward and backward) Axis - R - (back gauge rail - up and down) Maximum pressing force 3000 kN (= bending 16 mm steel sheet S235jr over the entire bending length in a V-die with a width of 140 mm = inside radius 16 mm) Maximum bending length 2,500 mm Distance between side columns 1,700 mm Overhang in the side columns 400 mm Press beam stroke 300 mm Maximum possible installation height 520 mm Press beam travel speeds downwards 80 / 10 mm/sec - upwards 70 mm/sec Table width 400 mm Adjustment range of the back gauge forward and backward 550 mm – up and down 200 mm, oil tank capacity 250 liters Dimensions approximately 3.3 x 2.3 m x height 3.1 m Drive power hydraulic motor 22 kW Weight approximately 16,000 kg We also supply other model sizes.

Condition: used, Zschokke HAP 063a - 4/6 - Hydraulic press brake - Year of manufacture: 1967 Technical data - Max. bending force: 630 t - Max. oil pressure: 400 bar - Distance between uprights: 4100 mm - Max. bending length: 6000 mm - Overhang: 375 mm - Stroke (adjustable): 0 - 500 mm - Distance between tool clamping surfaces: 300 - 800 mm Hydraulic pumps: - Main pumps: 2 x 22 kW - Delivery rate at idle: 2 x 153 l/min - Delivery rate at full load: 2 x 33 l/min - Control pump: 0.75 kW Installation: - Footprint (W x D): 6960 x 3250 mm Bsdpfx Acozf Hnie Towt - Height above ground: 4100 mm - Undercarriage, front: 2200 mm - Undercarriage, rear: 600 mm - Operating voltage: 3 x 400 V / 50 Hz - Machine weight: 51000 kg

Condition: ready for operation (used), Year of construction: 2010, pressing force: 400 t, stroke length: 400 mm, throat depth: 405 mm, clearance between the columns: 4,050 mm, total length: 6,100 mm, overall weight: 34,000 kg, Equipment: CE marking, documentation/manual, Hydraulic press brake Manufacturer: EHT - Trumpf, Type: TruBend 8400-50S Year of manufacture: 2010 Technical data Manufacturer: EHT / Trumpf Type: TruBend 8400-50S Year of manufacture: 2010 Capacity: 400 t Bending length: 5050 mm Distance between uprights: 4050 mm Throat depth: 405 mm Stroke of Y-axis: 400 mm Installation height: 720 mm Table width: 140 mm Motor power: 37 kW Oil capacity: 600 L Pneumatic connection: 6 +/- 1 bar Dimensions: approx. L 6.1 x W 2.8 x H 3.67 m Weight: approx. 34 t Equipment • Controlled axes: X, R, Y1, Y2, Z1, Z2 • Control system: Cybelec ModEva 10S, 2D – graphic control • Upper tool clamping system Trumpf/Wila, hydraulic • Lower tool clamping system Trumpf, hydraulic • CNC-controlled crowning • Safety light curtain Lazersafe Bwodpfx Aezd Tf Sec Tot • 2 pcs. CNC bending aids incl. parking position • Pneumatic die shifting • Foot switch • Very large tool package, as shown in the photos • LCB angle measuring system (2 x front, 2 x rear) All information without guarantee.

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, operating hours: 14,367 h, pressing force: 320 t, stroke length: 445 mm, table length: 4,420 mm, throat depth: 420 mm, clearance between the columns: 3,680 mm, total width: 5,300 mm, total height: 3,200 mm, overall weight: 25,000 kg, year of last overhaul: 2026, Equipment: CE marking, safety light barrier, Special equipment: + Front work area lighting + Rear back gauge system, 6 axes, with control cabinet air conditioning + ACB Easy communication bus (hardware side) + Hydraulic upper tool clamping + CNC-controlled lower tool positioning (I-axis) + CNC-controlled crowning Machine - Sturdy machine frame in all-steel construction Stress-relieved pressure beam through annealing - 4-cylinder upper drive - Block hydraulics with low-noise double pump - Rear back gauge with CNC-controlled X and R axes - Hydraulic upper tool clamping - Hydraulic lower tool clamping - Control cabinet cooling via air-to-air heat exchanger - Network connection for machine control Control - TRUMPF TASC 6000 Safety - Standard safety devices Bwsdpfx Aszdc A Ijc Tet

Condition: used, Year of construction: 2023, operating hours: 2,216 h, total length: 5,750 mm, total width: 2,110 mm, total height: 3,640 mm, Weight: 27.760 kg Price: On request - Year: 2023 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 7376230761 - Operating hours: 2216 - Drive system: CNC - Control system brand: Durma - Control system type: DT-15 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 400 - Max. working width [mm]: 4050 - Column gap [mm]: 3400 - Throat depth [mm]: 630 - Max. stroke [mm]: 365 - Crowning system: CNC-controlled - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 5750mm x 2110mm x 3640mm (l x w x h) - Transport weight [kg]: 27760kg - Transport packages [pcs.]: 1 Bwsdpfxjzcnpds Ac Tst Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2007, operating hours: 20,700 h, pressing force: 337 t, overall weight: 24,000 kg, travel distance X-axis: 800 mm, controller manufacturer: DELEM, controller model: DA-66W, number of axes: 6, This 6-axis GASPARINI PSG 330/4000 Variante C was manufactured in 2007. It features a bending force of 330 tons and a useful bending length of 4100 mm. The machine includes a stroke of 400 mm and an X-axis travel of 800 mm. If you are looking to get high-quality bending capabilities, consider the GASPARINI PSG 330/4000 Variante C press brake we have for sale. Contact us for further details. - Distance Between Uprights: 3600 mm- Stroke: 400 mm- Installation Height: 600 mm- Throat: 500 mm- Approach Speed: 0 - 200 mm/sek- Return Speed: 0 - 125 mm/sek- Working Speed: 0 - 8.5 mm/sek- X-Axis Speed: 300 mm/s- X-Axis Accuracy: ±0.05 mm- R-Axis Stroke: 250 mm- R-Axis Speed: 160 mm/s- R-Axis Accuracy: ±0.1 mm- Z-Axis Speed (Option): 1000 mm/s- Z-Axis Accuracy (Option): ±0.25 mm- Z-Axis Repeatability (Option): ±0.15 mm- Motor Power: 30 kW- Oil Tank Capacity: 420 L- Recommended Hydraulic Oil: Shell Tellus Oil TX 46- Machine Weight: ca. 24 Ton- Table Width: 90 mm- Working Height: 965 mm- Hydraulic Components: Rexroth- Electrical Components: Telemecanique- Pneumatic Components: SMC- Control Unit CNC: Delem DA-66W- Safety System: Nuova Elettronica DFS Laser Beam - RX (Type 4 Safety Device)- Power Supply: 400V / 50Hz- Machine hours: 20,700 / 2,000,000 strokes- CNC controlled Z1-Z2-Z5 with 6-axis control DA - 66 W- Tool holder with upper and lower jaw clamping system Bwjdpfx Acey U Hwrj Tjt Technical Specification Bending Length 4100 mm

Condition: good (used), Year of construction: 2008, Used 6-meter CNC press brake by Amada Type: HFE 400 6 L Capacity: 6100 x 400 tons Bjdpfjy T Hltox Ac Tjwt Stroke: 350 mm Y1, Y2, X1, X2, R1, R2, Z1, and Z2 CNC controlled 9204 operating hours Weight: 36 tons Transport in 2 parts (main frame + separate lower table) Self-adjusting crowning system in the lower table 450 mm mounted on the floor foundation Dismantling and loading included

Condition: used, Year of construction: 1992, machine/vehicle number: 1311PH1442V1188, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 320 t, table length: 6,200 mm, Colly 320/6 press brake Bjdpfoy Ti Ahjx Ac Tjwt Price negotiable.

Condition: new, Year of construction: 2026, functionality: fully functional, PDH Series – Heavy-Duty CNC Press Brake Heavy-Duty CNC Press Brake – PDH Series | 4000–16000 kN | Bending Length up to 12000 mm The PDH Series is designed for the most demanding heavy industrial bending operations. With forces ranging from 400 to 1600 tonnes and bending lengths up to 12 meters, this series handles thick plate and structural steel bending with exceptional accuracy. Available Models & Key Parameters: ModelForce (kN)Bending Length (mm)400/310040003100400/410040004100500/600050006000600/50006000 5000600/600060006000600/800060008000800/600080006000800/800080008 0001000/60001000060001000/80001000080001200/80001200080001600/800 01600080001600/120001600012000 Common Specifications: CNC Axes: 3+1 / Y1, Y2, X, V Slide Stroke: 300–500 mm Open Height: 560–1000 mm Throat Depth: 400–800 mm Main Motor Power: 30–110 kW (2×55 kW on the largest models) Oil Tank Capacity: 800–3000 L Approaching Speed: 70–100 mm/s Bedpfoy Swptox Ac Tswt ✅ Heavy-duty construction for thick plate & structural steel ✅ Bending lengths up to 12,000 mm ✅ Forces up to 16,000 kN (1600 t) ✅ CE certified | Warranty | Spare parts & technical support

Condition: excellent (used), Year of construction: 2001, Manufacturer: LVD Type: PPEB 170/42 Year: 2001 Serial number: 27755 Bsdpfx Ajy Sk R Dec Tswt Maximum pressing force: 170t Bending length: 5m Number of axes: 4

Condition: good (used), Year of construction: 2007, functionality: fully functional, operating hours: 94,201 h, bending force (max.): 400 t, installation height: 595 mm, control type: CNC control, Bending length [mm] 3550 Pressing force [tons] 400 Control system Cybelec ModEva 10s Standard equipment: - Sturdy machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics - CNC rear stop for X and R axes, safe displacement of the stop fingers from the front by means of a safety interlock - Upper tool clamping system "EHT", manual, head width 26mm, load max. 3000 kN/m - Lower tool clamping system EHT, manual, clamping width 90mm for block tools and 13mm for single V-dies, without clamping - Control system: CYBELEC ModEva 10S on Windows, 2D graphic control with a 10.4" color screen - Control cabinet air conditioning + Rear stop - System 1, 5 axes, straight finger, 140mm wide, adjustment of R axis 150mm + EHT quick clamping device, for upper tools, pneumatic, head width 26mm, load max. 3000 kN/m (self-centering horizontally) + EHT lower tool clamping, pneumatic, clamping width 55mm + Hardened insert strip, for EHT lower tool clamping 55mm / 90mm + Lower tool displacement, CNC-controlled, infinitely adjustable via rear stop 1 (max. 4550 mm working length) + Crowning device CNC-controlled, in the table without tool clamping, load max. 3000 kN/m + Safety device LaserSafe (up to max. upper tool height 440mm) + Additional foot switch + Bending aid 1st arm, load max. 1500N with 2 integrated support strips in standard design Bwjdpfxsy Saurs Ac Tjt + Bending aid 2nd arm, load max. 1500N with 2 integrated support strips in standard design + 2 pcs. support strips for a bending aid with T-slot 14mm and scale and ball rollers + 2 pcs. table extension for bending aid + Short park position left + Short park position right

Condition: new, Year of construction: 2026, machine/vehicle number: H4-400_1, functionality: fully functional, power: 30 kW (40.79 HP), pressing force: 400 t, stroke length: 300 mm, operating speed: 100 mm/s, reverse speed: 80 mm/s, table width: 4,100 mm, throat depth: 400 mm, clearance between the columns: 3,600 mm, oil tank capacity: 180 l, total length: 6,150 mm, total width: 2,700 mm, total height: 3,400 mm, overall weight: 23 kg, Equipment: CE marking, documentation/manual, safety light barrier, Cone H4-400 Hydraulic Press Brake - DA-66S CoastOne - Finland Technical Specifications Cone H4-400: Bending force: 400 tons Bending length: 4100 mm Cylinder spacing: 3600 mm Stroke: 300 mm Width: 500 mm Throat depth: 400 mm Table height: 985 mm Length: 6150 mm Width: 2700 mm Height: 3400 mm Approach speed: 100 mm/s Return speed: 80 mm/s Bending speed: 10 mm/s Oil tank: 400 l Weight: 22.5 tons Main motor: 30 kW Standard Equipment: - CNC-controlled X, R, Z1, and Z2 axes - 2 backgauge fingers - Delem DA-66S Graphical Control - CNC-controlled crowning device type 1 - AMADA Promecam tool holder - LazerSafe LZ2 front safety laser + PLC + rear light curtain - Standard punch and 4V die - Integrated LED lighting on the ram as front lighting Delem DA-66S Graphical Control: - 24-inch high-resolution touchscreen - 2D graphical programming interface - 3D machine visualization in simulation and production - Supports 3- to 8-axis control - Includes offline programming software Profile-T Lite – T2D Bwodpfx Aoy Efczec Tot - USB and peripheral interfaces - User-specific application support in the control's multitasking environment - Interface for sensor bending and automatic angle correction