Rhotec GmbH

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min Cpedpfeyrn A Njx Agzjw rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: repair required (used), Year of construction: 2014, operating hours: 23,000 h, functionality: not functional, machine/vehicle number: 21066714, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, controller model: Siemens Sinumerik 840D sl, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 600 mm Spindle speed: 20,000 rpm Rapid traverse X/Y-axis: 60 m/min Rapid traverse Z-axis: 45 m/min Tool holder: HSK-63F Clamping table dimensions: 2,000 x 1,000 mm MACHINE DETAILS Control model: Siemens Sinumerik 840D sl Operating hours: 23,000 h Cpodpfxjyq Ra Uo Agzow EQUIPMENT Swiveling spindle External cooling unit (manufacturer: Pfannenberg) Note: There is a fault in the control system. It does not respond to any inputs. Repair by Siemens Service is required!

Condition: ready for operation (used), Year of construction: 2008, operating hours: 53,216 h, functionality: fully functional, machine/vehicle number: 22024211, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS Cjdpfjyq Nx Nsx Agzopw Travel X-axis: 2,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 600 mm Spindle speed: 20,000 rpm Rapid traverse X/Y-axis: 60 m/min Rapid traverse Z-axis: 45 m/min Tool holder: HSK-63F Clamping table dimensions: 2,000 x 1,000 mm MACHINE DETAILS Control model: BWO CNC Operating hours: 53,216 h EQUIPMENT 5 compact clamps (Model: Kopal Duo) Custom machine enclosure Swiveling spindle External chiller (Manufacturer: Pfannenberg, cooling capacity: 1.7 kW)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 73,695 h, functionality: fully functional, machine/vehicle number: 22021508, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, controller model: BWO RC, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 600 mm Spindle speed: 20,000 rpm Rapid traverse speed X/Y-axis: 60 m/min Rapid traverse speed Z-axis: 45 m/min Tool holder: HSK-63F Csdpfx Agjyq Nx Aozepw Clamping table dimensions: 2,000 x 1,000 mm MACHINE DETAILS Control unit: BWO RC Operating hours: 73,695 h EQUIPMENT Swiveling spindle Coolant system (MMS) External chiller unit (Manufacturer: Maka) New ball screw for Z-axis, installed by Maka Service in 2024

Condition: used, Year of construction: 1983, functionality: limited functionality, feed length X-axis: 1,700 mm, feed length Y-axis: 650 mm, feed length Z-axis: 700 mm, table width: 570 mm, table length: 2,000 mm, Oerlikon FM 3 CNC milling machine Heidenhain TNC 320 Cjdpeyp Dxusfx Agzspw Most recently used for milling weld bevels Tool holder SK 50 Powered on, test operation possible Loading with overhead crane possible

Condition: good (used), Year of construction: 1988, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, 5-axis machine Feed rate stepless: 2-4000 Total power requirement: 20 kW Cpodpfx Aeyplwregzsw Machine weight approx.: 7 t Space requirement approx.: 7 linear meters

Condition: as good as new (ex-display), Year of construction: 2021, Machine is on display. Optimill F 310 HSC Premium CNC milling machine, directly from the manufacturer. F 310 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. • Heavy-duty design • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile guideway with roller circulation in all axes for high load capacity • High-torque servo drives, directly mounted to ball screws on all three axes • Precision-ground, preloaded high-performance ball screws for high rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 12,000 rpm with inline spindle • Massive, precision-ground milling table with five T-slots, large dimensions • Portable electronic hand wheel with enabling button and emergency stop switch, significantly simplifies program setup • Tool changer arm gripper with 30 tool positions • Coolant unit with chip flushing system and cleaning pistol • Through-spindle coolant with 20 bar pressure • Belt-type chip conveyor ensures efficient chip removal • Chip trolley • Oil separator • Machine light in the work area • Additional SIEMENS package: material defect warranty and free online/on-site service OSS Plus • 1-year maintenance contract Basic included for DE/AT/CH Control • 15.6" color display • 16:9 format Total package • Safety Integrated • Raw material recognition and processing • ShopMill step programming • Network drive management • 3D simulation • Drawing function Equipment details • Inline spindle • Taper SK 40 / DIN 69871 • Spindle speed 12,000 rpm Dimensions and weights • Length approx. 4319 mm • Width/depth approx. 2300 mm • Height approx. 3000 mm • Weight approx. 7000 kg Rapid traverse speed • X-axis 30 m/min • Y-axis 30 m/min • Z-axis 30 m/min Electrical data • Supply voltage 400 V • Mains frequency 50 Hz • Total connected load 56 kVA Horizontal milling table • Length 1200 mm • Width 600 mm • T-slot size 16 mm • Number of T-slots 5 • T-slot spacing 100 mm • Max. load capacity 800 kg Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm Travel • X-axis automated 1050 mm • Y-axis automated 600 mm • Z-axis automated 600 mm Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 12,000 rpm • Drive motor output continuous S1 20 kW • Drive motor output S6-30% operation 50.3 kW • Drive motor torque continuous S1 96 Nm • Drive motor torque 30% operation S6 240 Nm Feed force • Feed force X-axis 6.68 kN • Feed force Y-axis 6.68 kN • Feed force Z-axis 10 kN Feed motor torque • X-axis continuous S1 18 Nm • Y-axis continuous S1 18 Nm • Z-axis continuous S1 27 Nm Cpedpfxoynf Uno Agzjw Tool changer • Double arm gripper • Number of tool positions 30 • Maximum tool length 300 mm • Maximum tool weight 8 kg • Tool-to-tool change time 2.5 s

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 9520190, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 30,000 rpm, overall weight: 3,300 kg, In July 2025, the drive module, hard disk module, PLC card, and the screen module with keyboard were replaced at a cost of €24,000. A replacement spindle can be purchased separately for €4,000. TECHNICAL DETAILS X-axis travel: 2,000 mm Y-axis travel: 1,000 mm Z-axis travel: 560 mm Cjdpeymmtvefx Agzjpw Spindle speed: 30,000 rpm MACHINE DETAILS Interface: USB WiN PCIN Control: Siemens Sinumerik 840 C Weight: 3,300 kg Voltage: 380 V 50 Hz Rated current: 38 A EQUIPMENT Central lubrication system

Condition: used, Year of construction: 1993, functionality: fully functional, feed length X-axis: 2,500 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 940 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 2,100 rpm, overall weight: 10,000 kg, We offer this used WAGNER WM 2600 milling machine, year of manufacture 1993. Type: WM 2600 Serial number: 9009279 Year of manufacture: 1993 Travel distances X-axis: 2,500 mm Y-axis: 940 mm Z-axis: 1,000 mm Spindle speed: 2,100 rpm Table length: 2,600 mm Codpfxeyha Tro Agzspw MACHINE DETAILS Control: Heidenhain 355 Weight: 10,000 kg EQUIPMENT SK50 milling head If you have any further questions or require more information, please send us a message or call us.

Condition: as good as new (ex-display), The Vector 1000 M Si (15" Multitouch-Panel/SK40) is an advanced Vertical Machining Center within the C-Frame Vertical CNC Centers category, designed by KNUTH for tackling complex manufacturing tasks. This compact all-in-one machining solution is built with a rigid structure, featuring a 30 mm preloaded ball screw and dual-arm tool changer with 24 stations, ensuring both flexibility and efficiency for everyday production needs. Its robust design allows for high accuracy and excellent force absorption during machining, supported by 30-bar internal cooling for superior machining quality. With the Siemens Sinumerik 828D control panel, operators can benefit from maximum precision and user-friendly programming via a 15-inch multitouch display, enhancing productivity and ergonomics. Ideal for multi-shift operation, this machine is perfect for achieving optimized performance in various milling applications. For more information or to request a quote, explore the unique features of the Vector 1000 M Si in the Vertical Machining Centers and C-Frame Vertical CNC Centers range. Codoyg Dinspfx Agzepw

Condition: as good as new (ex-display), The Vector 1000 M Si is a versatile and powerful Vertical Machining Center in the C-Frame Vertical CNC Centers group, designed by KNUTH to tackle complex manufacturing tasks with ease. This compact all-in-one solution features a rigid machine structure with an extra deep center of gravity and a small footprint, which optimizes its operation. It includes 30 mm preloaded ball screws and a digital drive package for high torque and precision. The dual-arm tool changer with 24 stations facilitates flexibility and efficiency for daily production needs. With the Siemens Sinumerik 828D control system, users can expect maximum machining precision, intelligent kinematic transformations for complex parts, and features like the Advanced Surface for superior finishes in mold-making applications. The machine is equipped with a 15-inch multitouch panel that enhances usability and ergonomic comfort, making it suitable for multi-shift operations. To enhance your manufacturing capabilities, request a quote for the Vector 1000 M Si, a top-tier choice in Vertical Machining Centers and C-Frame Vertical CNC Centers. Cpjdoyg Dgtepfx Agzjw

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 2315, travel distance X-axis: 2,050 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 6,000 rpm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, total height: 1,800 mm, total width: 3,000 mm, total length: 4,000 mm, type of input current: three-phase, overall weight: 2,075 kg, input voltage: 380 V, input frequency: 50 Hz, We are offering this used Digima RJ2030 ATC CNC milling machine, year of manufacture 2008. Additional information is available if needed, please contact us. Codpfxex Tqghj Agzjpw

Condition: used, Year of construction: 1983, functionality: unexamined, total height: 1,900 mm, total width: 2,500 mm, total length: 3,000 mm, table width: 560 mm, table length: 1,400 mm, position of the milling head: Schwenkkopf, space requirement width: 2,500 mm, space requirement length: 3,000 mm, space requirement height: 1,900 mm, We are offering this used Deckel FP4NC milling machine, year of manufacture 1983. Table dimensions: 1,400/560 mm, swiveling head, SK 40 tool holder, Dialog 4 path control, installation dimensions: 300/250/190 cm. Heavy-duty robust design with slant bed. 8 SK40 tool holders and a machine vice are also available upon request. Codpfx Agjx Sygnezjpw Location: 89312 Günzburg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2015, operating hours: 1,603 h, functionality: fully functional, machine/vehicle number: MV0062-000372, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, type of input current: AC, overall weight: 15,000 kg, Equipment: USB port, Doosan DNM 750 II – CNC Machining Center – Excellent Condition – Available in 2 Weeks The machine is currently running in daily production, accumulating hours, and can be demonstrated live during inspection. It has been professionally maintained and shows no mechanical or electronic issues. Machine Condition - Fully functional, operates flawlessly - Clean and well-maintained Cpjdpfx Ajx Ar Dqsgzjw - No vibrations, spindle issues, or alarm errors - Ready for immediate demonstration - Delivery possible in approx. 2 weeks Important Notes - Sold without accessories (no tool holders or workholding included) - All documents and technical information available on request - Ideal for machining steel, aluminum, and engineering plastics Additional Information - The machine can be inspected under power - Cutting test available on request - Loading and transport can be arranged at buyer’s cost

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 142333097, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, rotational speed (max.): 6,000 rpm, table load: 2,000 kg, TECHNICAL DETAILS Travel X-axis: 1,600 mm Travel Y-axis: 800 mm Travel Z-axis: 710 mm Max. spindle speed: 6,000 rpm Table dimensions (L x W): 1,800 x 800 mm Table load capacity: 2,000 kg Spindle taper: ISO 50 MACHINE DETAILS Machine dimensions: 2.73 x 4.31 x 3.03 m Length with chip conveyor: 4.31 + 1.03 m Cpsdox Ap S Eepfx Agzsw Depth with control system: 2.73 + 0.40 m Depth with coolant tank: 2.73 + 1.80 m Control unit: Heidenhain iTNC 530 Note: The machine can still be inspected under power until week 50.

Condition: excellent (used), Year of construction: 2018, Clausing Colchester 4VSQ MLLPWR CNC Turret Milling Machine Acu-rite Mill Power 3 Axis CNC Control Table Size 1370 x 254mm Travels: X – 1050mm Y – 390mm Z (Quill) – 115mm Z (Knee) – 355mm Vari Speed Head Spindle Taper IS040 Spindle Speeds Low 60 – 500rpm Spindle Speeds High 55 – 4300rpm Weight: 1850Kgs 3 Phase Electrics Manufactured: 2018 Complete with: Vice Interlocking Table Guards Cpsdpfxjx Af I Aj Agzsw Air Draw Bar Tooling Packaged (ISO40) Power Rise and Fall to Knee Auto Lube Worklight Coolant & Swarf Guards / Tray *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79028 Machine Serial Number: TC0015 Cost: £12,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 900 mm, feed length Z-axis: 800 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, total height: 3,130 mm, total width: 3,680 mm, total length: 5,350 mm, table width: 800 mm, table length: 2,000 mm, table height: 500 mm, position of the milling head: souvisle řízená ve 2 osách, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 20 rpm, table load: 3,000 kg, overall weight: 9,000 kg, workpiece weight (max.): 3,000 kg, Equipment: rotational speed infinitely variable, FSGQ 80 SM/A2 CNC - TOS KUŘIM Bed-Type Milling Machine, Table Length 2m Control System: Heidenhain TNC 530 Availability: In stock FSGQ 80 SM/A2 CNC – Technical Specifications: Basic Machine Data: Manufacturer: TOS Kuřim Overall length: 5,350 mm Overall width: 3,680 mm Overall height: 3,130 mm Total weight: 9,000 kg Total power requirement: 35 kVA Working Range: Longitudinal travel, X axis: 2,000 mm Transverse travel, Y axis: 900 mm Vertical travel, Z axis: 800 mm Spindle Head (Head S): Csdpfxoxp Iyuj Agzepw Spindle taper: HSK-A 63 Max. power: 19.3 kW Speed range: 20 – 4,000 rpm Number of speed stages: stepless Machining: stepless in 2 axes Feed Range X – Y / Z: Number of stages / range: stepless / 5 – 20,000 mm.min-1 Table: Table size: 800 x 2,000 mm Max. table load: 3,000 kg Tool Changer: Number of tools: 24 Low-pressure tool cooling: 4 bar High-pressure cooling: 20 bar Control system: Heidenhain TNC 530 Further details upon request.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 1,390 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 540 mm, table load: 1,500 kg, controller model: Heidenhain TNC 355, TECHNICAL DETAILS Travel X: 1,390 mm Travel Y: 710 mm Travel Z: 540 mm Table width: 560 mm Table length: 1,800 mm Codpfx Aoxn S Sfegzopw Table load capacity: 1,500 kg Tool holder: SK50 Speed range: 45 - 2,240 rpm Vertical speed: up to 2,800 rpm Feed range: 3 - 2,000 mm/min MACHINE DETAILS Control: Heidenhain TNC 355 Main drive: 18.5 kW Transport dimensions & weight Transport dimensions (L x W x H): 2.7 x 3.0 x 2.9 m Transport width with X-axis drive removed: 2.45 m Machine weight: approx. 5.5 t EQUIPMENT Rapid traverse on all 3 axes Swivelling milling head +/- 45°, including quill stroke 90 mm Swivelling bracket for vertical milling head Swivelling counterholder for horizontal milling arbors Electromechanical tool clamping Manuals

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 9101291, travel distance X-axis: 2,500 mm, travel distance Y-axis: 940 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,100 rpm, table length: 2,600 mm, TECHNICAL DETAILS Travel distances X-axis: 2,500 mm Y-axis: 940 mm Z-axis: 1,000 mm Spindle speed: 2,100 rpm Table length: 2,600 mm MACHINE DETAILS Control: Heidenhain 355 Cpsdpfx Agexdaiqszjw Weight: 10,000 kg EQUIPMENT SK50 milling head

Condition: used, Year of construction: 1996, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 50 rpm, X-AXIS TRAVEL: 2500 MM Y-AXIS TRAVEL: 1000 MM Z-AXIS TRAVEL: 1000 MM FIXED TABLE: 1600 X 800 MM - MAXIMUM LOAD: 5000 KG ROTARY TABLE: 750 X 750 MM - MAXIMUM LOAD: 5000 KG RAPID FEED AXES: X, Y, Z: 10,000 MM/MIN SPINDLE TAPER: ISO 50 SPINDLE SPEED: 50 - 3000 RPM SPINDLE MOTOR POWER: 16.5 KW Cedpfxjwz H Hms Agzepw NO. 2 SPEED RANGE CNC HEIDENHAIN TNC 407 AUTOMATIC HEAD HORIZONTAL - VERTICAL AUTOMATIC TOOL CHANGER

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, 1 used CNC bed type milling machine with Heidenhain control. Cpsdowxxzqopfx Agzew Additionally, rotary table The rotary table has a diameter of 1200 mm. €220,000 – in 2012/2013 rebuilt with a new Rexroth rotary table, fully installed as a C axis. Swivel head is available. A wide range of tools as well as a 3D touch probe are included.

Condition: used, Year of construction: 1993, 2 pallet changers and 4th axis Year of manufacture: 1993 X-travel: 1,020 mm Y-travel: 560 mm Z-travel: 400 mm Table-to-spindle distance: 550 mm Control: Yasnac M80 Table size: 1,200 x 660 mm 2 pallets: 1 pallet with 2 Chick clamps – 1 pallet with 4th axis Tsudakoma RNCV201 Table load: 600 kg Tool holder: SK 40 Rapid traverse X-Y axes: 25,000 mm/min Rapid traverse Z: 15,000 mm/min Spindle speed: 200–20,000 rpm Motor power: 11/15 kW Tool magazine: 40 Codpfxjwxbg As Agzspw Internal coolant supply: 20 bar Coolant tank Timer Scraper conveyor Renishaw probe Spindle cooler Air cooler Electronic handwheel Machine weight: 9 t Required space: approx. 7 m x 4.5 m x 2.85 m Total power requirement: 40 kVA

Condition: excellent (used), Model: F30 Table Area: 1625 x 800mm Fully Rotational Through Control Control: Heidenhain 426 Codswif Rmspfx Agzopw ‘X’ Axis: 1800mm ‘Y’ Axis: 1150mm ‘Z’ Axis: 1370mm Spindle Taper: 50 INT Spindle Speeds: To 1800 RPM

Condition: used, Year of construction: 2018, x-travel 3200 / 2630 mm y-travel 750 mm z-travel 695 / 800 mm Control Heidenhain TNC 640 swivelling range -98 bis 98 Grad rotary table dia. 750 mm total power requirement 29 kW weight of the machine ca. 16 t Hedelius traveling column machining center Tiltenta 7 Magnum with continuously swiveling main spindle, 5-axis CNC control Heidenhain TNC 640, 22.0 kW/117 Nm main spindle drive 50-12000 rpm, 50-fold tool magazine and NC rotary table integrated into the fixed machine table. Machine equipment: Codpfx Agowfqqkezepw T7M-3200, operating mode 3 -Pressure booster pump 50 bar -Heidenhain TNC 640-T series -Spindle speed 12000 rpm/29.0 kW -Extended swivel range TNC/T -HR 510 handheld control unit -SK40/190 standby magazine -Cone cleaning station -900 l slant bed coolant system -25 bar internal coolant supply -Slant bed coolant system prefilter -Electrostatic exhaust air filters T / 2x1300 -Compressed air nozzle on spindle head -Internal compressed air supply -Blow-off guns -Rinsing guns -Infrared receiver M&H 91.40 -3D infrared measuring probe M & H 25.50 -Toolsetter M&H 35.70 -Workspace partition T7 with slider Control on: 33163:56:22 Machine on: 24185:07:21 Program run: 16784:12:57 Spindle: 11751.13.08

Condition: good (used), Year of construction: 2003, Vertical milling machine, UNITECH, type: FSS 315-S7, year of manufacture 2003 with 3-axis digital display ACU-RITE Hydraulic tool clamping, synchronous milling device, coolant device. Travel paths: X 1000 mm Y 355 mm Z505 mm Table: 315 mm X 1250 mm. Spindle mount: ISO 50 Spindle speeds: 28 - 2240 rpm Machine in good condition, machine documentation available. For further data, see data sheets. Cpjdpov A Trajfx Agzow