Machinehandel & Ingenieursbureau Peulen BV

Condition: used, Year of construction: 2018, Available from approx. 31.03.2026 Feed direction of the panel: from operator to the left Max. edge thickness: 3 mm Min. workpiece thickness: 8 mm Max. workpiece thickness: 40/60 mm Min. workpiece width: 80 mm Min. workpiece length: 190 mm Feed speed: 10 m/min Heating-up time: 5 min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutter Prodpfxsx Rdm Ae Aa Eof Diameter: 100 mm Height: 48 mm Adjustment of infeed fence: manual Guillotine shears up to: 3 mm Single strip edge feeding: possible Gluing: glue application roller PUR gluing: possible Cross-cut saw: Yes Combination unit flush/chamfer/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Flat scraper: Yes, following Aggregate display: on display Control type: PLC line control Operation: touch screen Motor power: 12 kW Mobility device: Yes Extendable roller support: Yes Protective hood: Yes Weight approx.: 1250 kg Extraction diameter: 80/140 mm Location in stock:

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Edge banding machine Prodpfxox Rcw Hj Aa Ejf - pre-milling unit - gluing unit - sawing unit - milling unit - scraping unit - glue scraping unit

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Edge banding machine - R0.03.61 composition "T-ER1" Podpfx Aaox Rcu Es Ejrf - 62.15.01 "AUTOSET" - 62.14.93 Pre-heating panel - 62.12.03 Anti-adhesive unit "AAR" - Rectification unit "RT-V1" - 62.15.06 Glue pot "SGP-E" - 62.13.49 Sawing unit "K-2 radius" - 62.15.02 Nesting kit - Milling unit "R-K" - Corner rounding unit "ROUND 1" - Belt scraping unit "RAS-V" - 62.12.61 Spraying unit for band finishing - 62.15.04 Glue scraping unit "RC-N"

Condition: used, Year of construction: 2016, AKV 3006 DK-F 1 unit edge banding machine AKV 3005 DK-F with jointing cutter unit, including DIA tooling. Jointing thickness up to 40 mm, workpiece thickness up to 3 mm. Combination milling station with radius R 2.5 mm. Technical specifications: - Hot-melt glue application to the workpiece for edge material up to 3 mm. - 60 mm workpiece thickness without jointing aggregate, 40 mm with jointing aggregate. - Maintenance-free, coated glue pot. - HF end trimming station (16,000 rpm) for front and rear edge overhang. - HF milling station (16,000 rpm) with replaceable insert cutter (combination type) and fine adjustment accessible from the operator side. - Spaces available for additional processing units (Hebrock system). - Feed rate approx. 10 m/min. - Adjustable cutting depth for trimming saw. - Signal lamp for workpiece sequence. - Robust chain drive. - Ergonomically arranged control panel. - Double roller top pressure beam. - Viewing windows for aggregates from both rear and operator sides. - PLC control including touchscreen. Technical data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg depending on equipment Prodex Rb Siopfx Aa Esf - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Airtronic including cooling and anti-static spray unit, 2014, 1 unit hot air aggregate for creating the optical zero-joint using special edge materials intended for this purpose. Including: - Pneumatic glue pot positioning - Cooling and anti-static spray unit - Two additional quick-change edge channels - Special version for corner rounding unit, max. workpiece thickness 60 mm, minimum workpiece length 200 mm - Exclusively for Hebrock edge banding machines of the 3000 series - Retrofitting possible later (additional costs on request) Technical data (Airtronic & corner rounding unit): - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Operational in approx. 2 minutes - Special version, minimum workpiece thickness 8 mm Further accessories and upgrades available on request: - Airtronic retrofitting on PLC machines, only possible at the Hüllhorst–Oberbauerschaft factory - Upgrade to edge thickness 8 mm, up to max. workpiece thickness 40 mm, with pneumatic saw adjustment - Special infeed fence for overlaid panels, 16 mm and 19 mm thickness, max. glue overhang 8 mm, separate pneumatic milling cutter adjustment (straight/radius) controllable from operator panel - Buffing station (swabbel), 1 unit - Corner rounding unit, 1 unit, including combination tool and pneumatic chamfer/radius adjustment, max. workpiece thickness 40 mm, min. workpiece length 300 mm, radius R 2.0 mm - Ball bearing for corner rounding cutter 24.1 mm: 1 unit - Ball bearing for corner rounding cutter 24.2 mm: 1 unit - Corner rounding unit for 60 mm workpiece thickness: 1 unit - Quick-change device for the corner rounding unit: 1 unit - Exchange motor 0.37 kW for the corner rounding unit: 1 unit, including terminal box with electrical connector, two pneumatic quick couplings, motor plate and short-stroke cylinder, or optionally Siko counter, including R 1.0 mm radius cutter, 24.1 mm bearing for corner rounding unit: 1 unit, 24.2 mm: 1 unit - Radius scraper: 1 unit with pneumatic lift-off device, radius R 2.0 mm and R 1.0 mm - Flat scraper: 1 unit with pneumatic insertion control - Glue station changeover system including glue outlet device downward (preparati

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, total height: 3,140 mm, working height: 1,000 mm, Curved edge banding machine Optimat KTD 820 for sale, in very good condition Technical specifications: • Year of manufacture: 2004 • Table height with suction cups: 1000 mm • Vacuum pump: 6 m³/h Podpfx Aaex N S Ifo Ejrf • Workpiece thickness: 16–40 mm • Min. workpiece width: 100 mm • Min. edge length: 250 mm • Edge height: 20–45 mm • Edge thickness: 0.4–3 mm • Glue pot capacity: approx. 0.5 l • Working temperature: 140–220°C • Feed speed: adjustable • Machine height: 3140 mm • Transport height: 2000 mm

Condition: ready for operation (used), Year of construction: 2018, operating hours: 32,000 h, functionality: fully functional, workpiece height (max.): 60 mm, Machine is in good and in working condition, frequently serviced and mantained. Machine can use EVA and PUR glue. Machine did 1900000 meters and 32000 hours of work. Podpex N A U Nefx Aa Esrf

Condition: ready for operation (used), Year of construction: 2018, operating hours: 32,000 h, functionality: fully functional, machine/vehicle number: 0-200-96-0379, workpiece height (max.): 60 mm, Machine is in good and in working condition, frequently serviced and mantained. Machine can use EVA and PUR glue. Machine did 1900000 meters and 32000 hours of work. Prjdox N A Upspfx Aa Eef

Condition: used, Year of construction: 2020, functionality: fully functional, Ott Tornado+ Edge thickness: 0.3 – 15 mm Workpieces Minimum length: 150 mm Minimum width: 70 mm Minimum height: 8 mm Maximum height: 60 mm Feed speed: 12-18 m/min, steplessly adjustable Machine height: 1,620 mm Machine width: 1,180 mm Machine length: 6,350 mm Machine weight: 3,100 kg Angle infeed assistance AZK 2 – automatic working scraper blade changer Synchroflex belt top pressure system Service station for OTT-COMBI-MELT gluing unit Prsdsx N Ar Uspfx Aa Eof

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements depth 8260 mm This BRANDT KDF 991 edgebander was manufactured in 2008. It is designed for efficient edge banding applications. Consider the opportunity to buy this BRANDT KDF 991 edgebander. Contact us for more information. Pjdpfjx Nr Hnex Aa Eorf Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2009, This STEFANI Solutions 86 edgebander was manufactured in 2009. It features Nordson equipment, a maximum glued edge thickness of 25 mm, and a maximum panel thickness of 60 mm. The machine includes electric height adjustment, upper belt pressure, and a preheating zone. It also boasts interchangeable roller storage with 12 positions and a replaceable glue pot. Consider the opportunity to buy this STEFANI Solutions 86 edgebander. Contact us for more information about this machine. Application Types Edge Banding Pjdex Nr Raepfx Aa Eorf

Condition: ready for operation (used), Year of construction: 2003, Brandt Edge Banding Machine Type: Profi KDF 670 Single-sided edge banding machine in right-hand configuration suitable for craftsmanship, for hot-melt adhesive application. Quick-change gluing module for processing PU glue granulate in compliance with adhesive processing regulations. Infrared hot-melt glue activation Automatic edge magazine for coil material for thick PVC/ABS Podpfx Aaex Nrtno Eerf Heavy-duty pressure zone Centrally adjustable top pressure Operating panel at machine infeed PC 16 electronic control Technical Data: Edge thickness: 0.4 - 8 mm Roll cut, max. 3 x 45 mm or 0.8 x 60 mm Workpiece thickness: 8 - 55 mm Feed rate: max. approx. 14 m/min Tool set R = 2 mm (exchangeable for R = 3 mm) Quickmelt gluing module Motor-driven height adjustment for top pressure - PC 16 Adjustable infeed fence Program-controlled adjustment for infeed fence Additional unit for laminate overhang Program-controlled pressure zone Release agent application for workpiece Jointing milling unit Jointing cutter set, Dia End trimming unit with chamfer/straight cut 0 - 15 degrees Pneumatic adjustment for end trimming unit, chamfer/straight Flush milling unit Pneumatic adjustment for milling unit Pneumatic two-point adjustment for vertical tracing rollers Jointing unit 0 - 25 degrees, synchronous flush milling Radius cutter set (exchangeable for chamfer cutter) Program adjustment for edge thickness Pneumatic adjustment for side tracing rollers Profile milling unit above and below - For profiling/flush trimming of end edges on post- and softforming parts and corner rounding of thick PVC edges. / Wood edges possible to a limited extent Scraper with quick-change heads Pneumatic adjustment for scraper Flat scraper glue joint Cleaning agent application for workpiece Buffing unit, 2 motors Electrical and mechanical preparation of the edge banding machine for integration of Ligmatech workpiece return conveyors ZHR01/ZHR02/ZHR15 Weight: 3000 kg Total connected load: 15 kW Length: 5880 mm Location: ex-site customer - Immediately available - System must be dismantled by the buyer

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2128, feed rate X-axis: 18 m/min, workpiece height (max.): 65 mm, edge thickness (max.): 15 mm, warranty duration: 12 months, HOLZ-HER Edge Banding Machine SPRINT 1329 multi, year of manufacture 2025, ex works delivery - Motorized pressure bridge adjustment - iTronic – automatic pressure and glue quantity control - Motorized adjustment of the infeed fence 1350 mm - Automatic chain lubrication - Vertical bottom nesting shoes - Edge-Control PPC 322W control unit with 21.5" color touchscreen - ECO-MODE energy-saving mode - Pre-milling unit FG501 with 2 milling aggregates - Glue application system GlueJet GJ725 for EVA and PUR in cartridge and granule form, swiveling 90 degrees - Storage chute for 1.5 kg EVA granulate - Motorized pressure unit D501 - End trimming unit KA501 - Milling unit FR701 Mot6 multi - Profile milling unit FF701 with 100% repeat accuracy - Scraping unit ZT502 Mot6 multi with motorized 6-axis adjustment Prsdpfx Asx Nqn Roa Eef - Surface scraper FK701 - Spray unit TR501 for infeed and outfeed - Spray unit GM501 after pressure unit for high-gloss edges - Buffing unit SW501 - Delivery time: immediately available

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Holz-her Lumina 1380 Edgebander with return conveyor Max. edge banding thickness: 8 mm Max. panel thickness: 60 mm Max. thickness of rolled material: 3 mm Min. workpiece length: 160 mm Min. workpiece width: 60 mm HOLZ-HER GLU JET adhesive system Spraying unit Calibrating units Pre-heating End trimming/cross-cut stations Milling stations for trimming/radius/chamfering Podpfxsx Nnbbe Aa Ejrf Corner rounding units Edge scraper Brush unit Holz-her Edgecontrol control system

Condition: used, Year of construction: 2021, operating hours: 952 h, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, input voltage: 400 V, power: 7.8 kW (10.61 HP), input current: 21 A, input frequency: 50 Hz, We offer this used Hebrock F 5 edge banding machine, year of manufacture 2021. Voltage: 400 V Frequency: 50 Hz Current: 21.7 A Power: 7.8 kW Year of manufacture: 2021 Machine number: F2965 Pedpfxex Nkfvj Aa Esrf If you have any questions or need further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2018, Edgebander Manufacturer: Felder Model: G360 Year of manufacture: 2018 Operating hours: approx. 813 h Edge thickness: 0.4 - 3 mm Workpiece thickness: 10 - 45 mm Feed speed: 8 m/min Total power: 5.5 kW Overall length: approx. 3,200 mm Pre-milling unit: Yes End trimming unit: Yes Flush trimming unit: Yes Prsdpfx Asx Niuvja Eef Radius scraper: Yes Surface scraper: Yes

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 80 mm, edge thickness (max.): 15 mm, power of the milling unit: 3,000 W, overall weight: 7,000 kg, compressed air connection: 6 bar, height adjustment type: electric, space requirement length: 10,500 mm, year of last overhaul: 2023, Fully refurbished Topedge Duo-melt, year 2014 2 x 3Kw each Pre-milling motors 80 mm panel thickness 1 x Synchroflex top driven belt system 2 x Glue heads and tanks, Duo Melt system (For instant glue colour changes) Pedpsx Nbprefx Aa Eerf 1 x rough trim station 1 x Bevel fine trim (can also be used for fine finishing wood in “flat” setting - adjustable angle 1 x Radius trimming machine 1 x AKF station 1 x 4 position per side AZK4 radius scraper 1 x Flat scraper 1 x Cleaning spray, front, middle and back - LCM 1 x Buffing station 2 x free spaces Infeed fence alignment for narrow panels Nesting package LCM iRelease cleaning system BrushTec ES - not included

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Panel height: 60 mm Edge thickness (roll): 3 mm Edge thickness (strip): 12 mm Panel length: 3200 mm Predpfxox Nav Re Aa Eef Calibrating unit End trimming unit Overlapping trimming unit RS-502 Chamfering unit RF100 Rounding unit with two motors Edge scraper unit Glue scraper unit Brushes unit Blower/Hot air unit SMART TOUCH 23" control

Condition: ready for operation (used), Year of construction: 2013, This 5-axis SCM Stefani MD HP edgebander was manufactured in 2013. It features a robust steel construction, high-frequency motors, and a "Startouch" control system with a 12" touchscreen. Capable of handling solid wood edges up to 15 mm and rolls up to 3 mm, it includes a pre-milling unit, interchangeable glue pot, and a feed speed of 25 m/min. Consider the opportunity to buy this SCM Stefani MD HP edgebander. Contact us for more information. Podpfjx I S R Dsx Aa Ejrf Application Types Edge Banding

Condition: good (used), Year of construction: 2018, 0,4 - 6 mm Workingpiece thickness from to 8-60 mm Total length 3960 mm Feed speed 10 m/min. Weight 1055 kg Podsx I Sgrjpfx Aa Eerf

Condition: excellent (used), Edgebander BRANDT Ambition 1220 Pre-milling units Glue application by roller Tank features exchange function (machine includes only one tank) Pneumatic pre-cut guillotine Pedpfx Aasx I Nb Hs Esrf Pressure rollers Trim saws for finished cuts Top-bottom milling unit R1-R2 Corner rounding unit Profile scraper Flat scraper Max workpiece height: 60 mm Max edging thickness in roll: 3 mm Max feed speed: 11 m/min Well-maintained machine in very good condition, low operating hours

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, feed rate X-axis: 16 m/min, total length: 3,960 mm, workpiece height (max.): 60 mm, total width: 900 mm, edge thickness (max.): 6 mm, total height: 1,750 mm, overall weight: 1,200 kg, type of input current: three-phase, compressed air connection: 6 bar, height adjustment type: mechanical, input voltage: 400 V, power: 7.1 kW (9.65 HP), input current: 30 A, input frequency: 50 Hz, pneumatic connection: 6 bar, product height (max.): 1,750 mm, plate length: 1,200 mm, plate height: 60 mm, pressure: 6 bar, operating pressure: 6 bar, Fravol edge banding machine, model F600-23 Plus, from the year 2023. - Touch display for setting all necessary parameters - Pre-milling unit - Separation and cleaning agent spraying system - Glue application - Pressure zone - End trimming unit - Top and bottom trimming units - Corner rounding unit - Radius scraper - Flat scraper All units are mechanically / manually adjustable. The machine was only very rarely used for demonstrations and testing purposes at our factory and operates perfectly. The machine is in as-new condition with no known defects or damage. Predpfx Aex I I Raja Eof The machine can be inspected and collected at the Rödinghausen facility. On request, we are happy to prepare sample pieces in advance.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Sanding unit (pre-milling) for panels. End trimming unit with two motors. Edge trimmer Edge scraper (radius/flat) Brushes Control: Touch screen display Pedpfx Aex I Izlea Esrf

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Pre-milling Gluing unit Predpfx Aaex I D Tds Eof Pressure unit Rounding/Chamfering milling unit Edge scraper

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Pre-milling aggregate Prjdpfx Aasx I A Due Eof Glue station for granulate Pneumatic pre-cut guillotine Trimming unit with two saw blades Profiling milling unit with profile cutters Profile scraper Polishing units Year of manufacture: 2009 Machine length: 3.7 m

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Morbidelli M800 X5 machining center X working field: 6360 Y working field: 1680 Z working field: 350 5-axis electrospindle with liquid cooling, 13 kW – HSK 63F Tool magazine disc moving on X-axis, 48 tool positions Processing unit with Vector 360° axis 1 cutting saw blade 1 vertical outlet for milling 3 vertical outlets for drilling 3 vertical outlets for handle holes 2 horizontal outlets for milling 2 horizontal outlets for drilling CE safety system with bumpers CNC PC-Office control with integrated computer 3D programming system WOP XILOG-MAESTRO 250 m³/h vacuum pump Prodex I A Aqspfx Aa Ejf Available December 2026.