Zhejiang Hualei Precision Machinary Co.,Ltd

Condition: used, Year of construction: 2001, functionality: fully functional, Absolutely trouble-free! Ready for immediate operation! Transport possible! Control: Heidenhain iTNC426 • Spindle power: 25 kW • Max. spindle speed: 18,000 rpm • Control: Heidenhain iTNC426 • Travel paths: X-axis: 650 mm Y-axis: 550 mm Z-axis: 500 mm • Table size: 550 x 900 mm • Max. feed rate (X/Y/Z): 50,000 mm/min • Tool holder: SK40 • Tool magazine: 30 positions • Handwheel • Chip conveyor • Air-conditioned control cabinet Csdpfsyrublex Agzspw • Max. workpiece weight: 800 kg • Machine weight: 7,500 kg • Dimensions: 3300 x 2400 x 2900 mm

Condition: good (used), Year of construction: 1998, Hermle C 600 U CNC Machining Center Cjdpfsyrr Ucox Agzopw Manufacturer: Hermle Model: C 600 U Year of manufacture: 1998 Operating voltage: 400 V / 3~ Frequency: 50 Hz Control voltage: 24 V Total rated current: 31 A Control system: Heidenhain TNC 426 Machine weight: 6,400 kg X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm Tool magazine: 30 positions Tool holder, type: SK-40 Accessories: included, as per photos (vice + probe) No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Condition: used, Year of construction: 2018, x-travel 670 mm y-travel 820 mm z-travel 600 mm Cjdjyrhwaepfx Agzspw weight of the machine ca. 20000 kg

Condition: good (used), Year of construction: 1997, Mikron UM 600 CNC Milling Machine Technical Specifications Cedpfx Agjyrhghszspw Manufacturer: Mikron AG Biel, Switzerland Model: UM 600 TNC 410 Machine Weight: 3,340 kg Power Supply: 3-phase 400 V 50 Hz Current Consumption: 40 A Connected Load: 15 kW Control Voltage: 24 V DC Control System: Heidenhain TNC 410 Year of Manufacture: 1997 X-axis Travel: 600 mm Y-axis Travel: 500 mm Z-axis Travel: 450 mm Clamping Area: 900 x 530 mm No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1537001259A, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 620, total height: 2,700 mm, total length: 4,000 mm, total width: 2,700 mm, table width: 560 mm, table length: 790 mm, overall weight: 4,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5,000 h, number of slots in tool magazine: 20, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 35 A, spindle torque (max.): 83 Nm, Equipment: documentation/manual, DMG MORI ECOMILL 635 V CNC Vertical Machining Center - Connection: 17 kVA - Setup speed in X/Y/Z: 20 - 2000 mm/min Cedpfx Aoyrfv Hogzjpw - Travel measuring system X/Y/Z: 1 µ - Positioning uncertainty X/Y/Z: 6 µ - Tool holder: SK 40 - Table with 5 T-slots Attention: All tool holders located in the tool changer are included in the scope of delivery! Attention: The item must be collected, bindingly, between 27.04. and 30.04.2026 on a date yet to be agreed. FCA D-45549 Sprockhövel – loaded on truck

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, x-travel 1000 mm y-travel 600 mm z-travel 600 mm Control: Heidenhain TNC 426 Spindle nose: 100–700 mm Cpedpfeyqxhaox Agzow Work table: 1,080 x 580 mm Max. workpiece weight: 550 kg T-slots: 7 pcs. T-slot width: 14 mm Tool magazine with 36 positions Max. tool weight: 8 kg Max. tool length: 340 mm Machine weight approx. 6.2 t Space requirement approx. 4,790 x 5,330 x 2,905 mm

Condition: used, Year of construction: 1995, x-axis 1000 mm y-axis 500 mm z-axis 500 mm dividing head CNC Codpfx Aoyqwccsgzepw Axles 4 spindle taper ISO 40 table surface area 1200x508 mm control Fadal CNC 88 HS Table load 600 kg turning speeds 40-7500 U/min Number: 9505858 Tool changer 21 The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2015, operating hours: 37,735 h, functionality: fully functional, machine/vehicle number: 14595607194, travel distance X-axis: 1,450 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, feed length X-axis: 42 mm, feed length Y-axis: 42 mm, feed length Z-axis: 42 mm, feed rate X-axis: 42,000 m/min, feed rate Y-axis: 42,000 m/min, feed rate Z-axis: 42,000 m/min, nominal power (apparent): 33 kVA, torque: 130 Nm, controller manufacturer: Siemens, controller model: 840D, total height: 2,910 mm, total length: 4,383 mm, total width: 3,395 mm, table load: 2,000 kg, rotary table diameter: 9,900 mm, rotational speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, NO DEALER INQUIRIES – Dealer requests will not be answered! We are offering a DMG MORI DMC 1450 V (vertical machining center) from our inventory for sale. Condition • Fully functional, currently in production • Demonstration/inspection under power possible Specifications Cjdpfeypi Dcox Agzepw • Operating hours: 37,735 h • Machine number: 14595607194 (nameplate: 4595607194) • Factory ID: 3044578 • Spindle: up to 10,000 rpm • Electrical connection: 400 V (±10%), 50 Hz, 33 kVA, max current 48 A, fuse 50 A • Total weight: approx. 9,900 kg • Year of manufacture: according to nameplate 2015 (delivery/installation possibly 2017 – please refer to documents) Dismantling/pick-up • Dismantling, loading and pick-up to be arranged by agreement For questions, further technical details (control unit, tool magazine, internal coolant supply, etc.) or to arrange a viewing, please feel free to send a message.

Condition: excellent (used), Year of construction: 2017, operating hours: 8,500 h, functionality: fully functional, machine/vehicle number: 20601, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, torque: 167 Nm, controller manufacturer: Fanuc, controller model: 31 i, workpiece height (max.): 350 mm, workpiece diameter (max.): 710 mm, workpiece weight (max.): 200 kg, total height: 2,880 mm, total length: 4,620 mm, total width: 2,260 mm, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 8,500 h, coolant supply: 70 bar, number of spindles: 1, number of slots in tool magazine: 90, tool type: SK 40, Equipment: chip conveyor, rotational speed infinitely variable, Very well-maintained and serviced machine, which we have only used for relatively few prototypes in recent years. The machine has never suffered a crash and is still very precise. Csdpfx Ageypbyiszepw We no longer require the machine as we are exiting the prototype business. We have installed a zero-point clamping system but still have the original plate, which we can supply or reinstall if required.

Condition: excellent (used), Year of construction: 2008, Opportunity to purchase this outstanding 5-axis HERMLE C30U including an additional tool magazine ZM157. Machine can be inspected in operation upon appointment in the Netherlands. Availability: 05/2026 Cpodoypbfrepfx Agzow Full technical specifications in the attached document. Control Heidenhain iTNC530 Max spindle speed 18.000 rpm Tool taper HSK-A63 Tooling magazine ZM157 (157 positions) Linear guides yes TABLE- NC rotary table ø 280 mm Filter Paper belt filter Chip conveyor Scraper belt conveyor Internal coolant supply 80 bar high pressure cooling through spindle Spindle hours ca 45000h X 650 mm Y 600 mm Z 500 mm Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Taiwan Hartford VMC LG 1000 (Year 2012) Travels (X/Y/Z): 1000 mm / 510 mm / 630 mm Table Size: 1150 mm x 510 mm Max Table Load: 700 kg Spindle Speed: 10,000 rpm Spindle Taper: BT40 ATC Capacity: 24 Tools (Arm Type) Cpjdpfx Agsyn Th Nozow Controller: Fanuc

Condition: used, x-travel 630 mm Csdpfx Aeynnuqegzjpw y-travel 500 mm z-travel 500 mm weight of the machine ca. 4500 kg

Condition: used, Year of construction: 2013, x-travel 635 mm y-travel 510 mm z-travel 460 mm control Sinumerik 840 D SL Siemens turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm tension force 8 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - distance 100 mm T-slot - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg table height over floor 720 mm distance spindle nose and table 120 - 580 mm number of toolpositions 30 pos. Max. mould width 80 / (130) mm max. tool length 250 mm max. tool weight 6 kg max. total weight 80 kg change-time tool to tool 1,6 sec change-time chip to chip 6,0 sec rapid traverse 30 m/min feed speeds 1 - 20.000 mm/min Feed force max. 5 kN total power requirement 28 kVA weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 4,0 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 635 V New Design - ShopMill - WITHOUT perforated plate - WITHOUT clamping device - WITHOUT tools Cpjdpfx Agsym Dz Rozjw

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 635 mm, travel distance Y-axis: 365 mm, travel distance Z-axis: 345 mm, total height: 2,200 mm, table width: 500 mm, table length: 630 mm, table load: 1,000 kg, overall weight: 3,500 kg, spindle speed (max.): 40,000 rpm, This 3-axis OPS INGERSOLL 600 vertical machining center was manufactured in 2000. It features a travel range of 635 x 365 x 345 mm, a maximum table load of 1000 kg, and a high-speed spindle ranging from 5000 to 40000 rpm. The machine includes a tool magazine with 12 slots and an Andronic 2000 control system. Consider the opportunity to buy this OPS INGERSOLL 600 vertical machining center. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max. Distance from work spindle to clamping table: 470 mm • Tool holder: hsk-e 32 Codpfx Agsym Atxozepw • Tool magazine with 12 tool places • The machine is completely enclosed, an extraction system is part of the machine to extract the oil mist or dust generated during hsc milling. • Filter system manufacturer: teka Extra Information Machine still under power Dimensions Machine Depth 2200 mm

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 635 mm, travel distance Y-axis: 365 mm, travel distance Z-axis: 345 mm, total height: 2,200 mm, table load: 1,000 kg, overall weight: 3,500 kg, spindle speed (max.): 40,000 rpm, number of axes: 3, This 3-axis OPS INGERSOLL OPS 600 was manufactured in 2001. It features a work spindle speed range of 5000-40000 and a tool magazine with 12 positions. The machine includes an extraction system for oil mist or dust and a Teka filter system. Ideal for high precision milling, consider the opportunity to buy this OPS INGERSOLL OPS 600 vertical machining centre. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max distance from work spindle to clamping table: 470 mm • Work table clamping area: 630 x 500 mm • Tool holder: hsk-e 32 • Tool magazine: 12 tool positions • With media distributor • The machine is completely enclosed • Extraction system included for oil mist or dust • Manuals and operating instructions are available Extra Information Machine still under power Dimensions Cedpfx Aoym Ap Tegzspw Machine Depth 2200 mm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, table load: 400 kg, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis travel: 610 mm Y-axis travel: 410 mm Z-axis travel: 460–510 mm Table size (L × W): 700 × 410 mm Maximum table load: approx. 400 kg per pallet T-slots: 18 × 4 mm Pallet changer: Automatic pallet changer (APC) Changeover time: ~4 seconds Pallet clamping: 3-point clamping system (patented) Spindle taper: BT-40 / ISO40 Maximum spindle speed: 8,000 rpm Spindle motor: approx. 9 kW Tool magazine (ATC): 24 positions Tool capacity: 24 Maximum tool diameter: approx. 80–125 mm Maximum tool length: up to ~250 mm Maximum tool weight: approx. 7 kg per tool Tool change time: Rapid change arm Rapid traverse speed (X/Y/Z): up to approx. 30 m/min Feed rate: up to approx. 10,000 mm/min Axes: 3 axes (X / Y / Z) MACHINE DETAILS Dimensions & Weight Machine dimensions (L × W × H): approx. 2,360 × 4,365 × 2,878 mm Machine weight: approx. 7,500 kg Codpsymw Tmjfx Agzepw EQUIPMENT Automatic pallet changer (APC) 3-point clamping system for pallet fixing FANUC CNC control (e.g. 0iMB) LCD color display Automatic lubrication pump Coolant system incl. wash hose Chip conveyor Work light Electronic handwheel (MPG)

Condition: used, Year of construction: 2008, FANUC - ROBODRILL A-T14iFL - 2008 - system FANUC EL A5 - spindle 10000 RPM Cjdpfjymtavjx Agzspw - X/Y/Z=700/400/330 mm - rapid move 54 m/min - head 14 pos. - max table load 300 kg - taper BT30 - most probably also including tools holders in the two yellow boxes, without tools - weight 2100 kg - run time 12700+ hours

Condition: used, Year of construction: 2018, operating hours: 10,104 h, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, Equipment: chip conveyor, DOOSAN VC 630 5AX (5-AXIS machining center) Model: VC 630 5AX HEIDENHAIN TNC640 NC Year of manufacture: 2018 Condition: Used, very good, still in production Operating hours: 26,290 h Spindle hours: 10,104 h X-axis: 650 mm Y-axis: 765 mm Z-axis: 520 mm Cpjdpfx Asymc Ngsgzow A-axis: +30° to -120° C-axis: 360° Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 36 m/min Maximum table load: 500 kg Spindle: 16000rpm 30/24kW Tool holder: HSK 63A Through-spindle coolant: 18 bar Height: 3295 mm Width: 3200 mm Length: 4585 mm Weight: 13500kg

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, machine/vehicle number: MV0043-000317, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller model: Fanuc 0iM, Equipment: chip conveyor, The machine was in use until it was decommissioned in 2024. The only known limitation is that the tool changer is not functional. The original purchase price of the machine was EUR 193,000! TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 765 mm Travel Z-axis: 520 mm MACHINE DETAILS Control: Fanuc 0iM Rated apparent power: 53 kVA Coolant supply: 20 bar Input voltage: 380 V Type of input current: Three-phase current Mains connection: AC 380 V, 3~, PE, 50/60 Hz Rated power: 53.3 kVA Interrupting capacity: 5 kA Full load current: 84.1 A Short-circuit capacity: 10 kA Weight: 12,500 kg Cedpfx Aoyma H Nsgzjpw EQUIPMENT Documentation/manual Chip conveyor

Condition: used, Year of construction: 2006, Machine in operation from 2008. Control – FANUC 0M 2 pallets One pallete dimension – 650x420 mm Axes – X 580mm, Y 420 mm, Z 490 mm Spindle 12 000 rpm, SK40 Machine area 2500 x 2100 mm. Cjdpeyl U Uxefx Agzspw Machine weight 3900 kg

Condition: new, 3-fold attachment table for Hermle C20U, with 3 rotary tables rotating synchronously, programmable via the C-axis. Also available for C800U, B300U, C600U, C30U, C250U, and C32U. In use at renowned companies multiple times over the past 20 years. Machine 3 workpieces simultaneously, reducing tool changes and increasing machine uptime. Cpedjylyqfepfx Agzew For inquiries, contact: huber-cnc.com

Condition: good (used), Year of construction: 2005, Vertical Machining Center Okuma MB 46-VAE Control: OSP-E100M Year of manufacture: 2005 Travel Paths: X-axis: 600 mm Y-axis: 460 mm Z-axis: 460 mm Max. workpiece weight: 500 kg Clamping area: 1,000 x 460 mm Cedpfxeylwdcj Agzspw Spindle taper: SK 40 DIN ISO 69871 Tool magazine: 32 stations Spindle speed: max. 15,000 rpm Equipment - ICS / Internal coolant supply - Chip conveyor - USB drive

Condition: good (used), travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, In working condition Cedpfsylvc Dox Agzopw

Condition: ready for operation (used), Year of construction: 2004, operating hours: 30,826 h, travel distance X-axis: 660 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 455 mm, controller manufacturer: HURCO, controller model: Ultimax, overall weight: 3,400 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3-axis Hurco VMX1 was manufactured in 2004. It features a maximum spindle speed of 10,000 rpm and a cutting feed rate of up to 11,400 mm/min. The machine has a table size of approximately 760 × 355 mm and offers a tool changer with 16 stations. If you are looking to get high-quality milling capabilities, consider the Hurco VMX1 vertical machining centre we have for sale. Contact us for further details. • Cutting feed rate: max. 11,400 mm/min • Table size: approx. 760 × 355 mm • Tool changer: 16 stations • Machine hours: 30.826 • Condition: Used, good overall condition; fully functional and ready for operation Additional equipment • Coolant pump • Chip conveyor Cpsdpoylnbfofx Agzjw • Machine vise • 3D touch probe • Various collet sets / SK 40 tool holders • Tool cabinet with worktop and bench vise • Additional accessories by arrangement Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, Machine is being sold on behalf of the customer and can be inspected under power. Machine location: Czech Republic (Brno) Manufacturer: Deckel Maho Csdpfx Agoylmdfezepw Model: DMC 635V Year: 2007 Approx. 32,000 operating hours Control: Heidenhain iTNC 530 Spindle mounting: SK40 Speed: 10,000 rpm Travel (X/Y/Z): 635 / 510 / 460 mm Clamping surface (table): 790 x 560 mm 30-position tool changer + Blum laser tool measurement + Paper band filter / ICS 20 bar / 600 l + Chip conveyor Dimensions (approx.) LxWxH 260 x 390 x 240 cm Installation area 530 x 590 cm Weight: approx. 4,200 kg