Phu"Mur-Tech"

Condition: ready for operation (used), Year of construction: 1994, General Data Machine weight 9100 kg Measurements height 3000 mm Dimensions Machine Length 3700 mm Hodpexwzykofx Ah Hofp Main Drive Number of axis 3 Spindle Speed 8000 RPM Tool taper SK 40 Movement X-Axis Movement 1000 mm Z-Axis Movement 500 mm Y-Axis Movement 800 mm This 3-axis DECKEL DC 100V vertical machining centre was manufactured in 1994. It features a Dialog 112 control, a worktable of 1,250 x 800 mm, and a tool magazine with an automatic changer holding approximately 30 positions. The spindle operates at up to 8,000 rpm. Consider the opportunity to buy this DECKEL DC 100V vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2016, x-travel 1.100 mm y-travel 610 mm z-travel 610 mm table dimensions 1.250 x 610 mm Control Heidenhain turning speeds 15.000 U/min rapid traverse 32 m/min feed 20.000 m/min number of tool places 60 Pos. spindle hours ca. 3108 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved. Hodpfxsxwzhne Ah Hefp

Condition: excellent (used), Year of construction: 2003, X travel 1020 mm Y travel 510 mm Z travel 500 mm Spindle speed 6000 rpm Table load capacity 800 kp Table size 1150 x 580 mm Motor power 18.5 kW Hodpfx Aoxwvv Tsh Hsfp Weight 4,400 kg Dimensions: 2200 x 3200 x 2800 mm

Condition: used, Year of construction: 2016, Milling machines Travel distance X: 1020 mm Travel distance Y :700 mm Travel distance Z: 500 mm Number of axis: 3 milling machine / machining center Control: Siemens 828D spindle chuck: BBT-40 Hfedpoxwvfujfx Ah Hsp spindle revolutions: 15000 rpm table size X: 1050 mm table size Y: 700 mm Main Spindle Arm-Type Tool Changer

Condition: used, Year of construction: 2017, Milling machines Travel distance X: 1020 mm Travel distance Y :700 mm Hfjdexwvfnopfx Ah Hsp Travel distance Z: 500 mm Number of axis: 3 milling machine / machining center Control: Siemens 828D spindle chuck: HSK-A63 spindle revolutions: 20000 rpm table size X: 1050 mm table size Y: 700 mm Motor Spindle Umbrella-Type Tool Changer

Condition: ready for operation (used), Year of construction: 2012, Immediately available ex toolmaking shop in Switzerland: Vertical 5-axis simultaneous machining center Unitech Model HSM – IC 5 Axis Year of manufacture: 2012 Heidenhain iTNC 530 Table: 1100 x 600 mm Travel (X/Y/Z): 1080/610/810 mm Rotary table diameter: 600 mm Spindle speeds up to 15,000 rpm Hsdpfx Asxwu Rvsh Hofp Feeds up to 30,000 mm/min Table load: 500 kg Tool holder: BT 40 Magazine: 40 tools Through-spindle coolant (IKZ) 60 bar Chip conveyor Compressed air through spindle Spindle hours: 8,200 / Spindle will be completely overhauled in 2025 – hours reset to 0 Glass scales on X and Y axes Zero-point measurement system in rotary table Infrared measuring system Zero-point clamping system in rotary table with 10 clamping pots by Schunk Weight: 10 tons Offered at €19,500 plus VAT ex works

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Hodpfxsxwuu Ij Ah Hjfp Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: like new (used), Year of construction: 2022, operating hours: 1,260 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, controller manufacturer: Siemens, controller model: 828D ShopMill, table width: 610 mm, table length: 1,400 mm, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Inspection possible near Bonn - 12,000 rpm - Separate spindle cooling for constant temperature - Tool holder DIN ISO SK40 with blow-out function Hodpjxwufaefx Ah Hsfp - 30-position tool changer with double-arm gripper – tool change time 1.8 sec - Thread cutting without compensation chuck - Roller guides - Coolant and compressed air gun - Screw chip conveyor - Coolant unit - Compressed air cooling for dry machining - Electronic handwheel - Work area lamp

Condition: used, Year of construction: 2002, functionality: fully functional, HURCO - VMX 42 Offer Details Stock number: 1039-9402 Machine type: Vertical Machining Center Manufacturer: HURCO Model: VMX 42 Year of manufacture: 2002 Control: Winmax 9 (Upgraded) Location: D-59302 Oelde Country of origin: USA Hfedpfx Aoxwua Djh Hep Delivery time: By arrangement Shipping terms: Ex location Additional information: Vertical Machining Center HURCO VMX 42 Technical Specifications X travel: 1,060 mm Y travel: 610 mm Z travel: 610 mm Control: Winmax 9 (Upgraded) Table size: 1,270 x 610 mm Max. table load: 1,100 kg Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed range - milling: approx. 10,000 rpm Spindle drive power: 18 / 11 kW Tool holder: SK 40 Tool changer: 24 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent pocket empty: 120 mm Max. tool length: 300 mm Max. tool weight: 7 kg Feed rate: approx. 15.4 m/min Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 20 m/min Machine weight approx.: 7.0 t Space requirement approx.: 3.5 x 3.2 x 3 m Equipment Chip conveyor Coolant system High-pressure coolant Internal coolant supply Signal lamp Electronic handwheel

Condition: ready for operation (used), Year of construction: 2007, operating hours: 34,200 h, General Data Machine weight 7100 kg Control Unit Brand MAZATROL Model MATRIX NEXUS Hfedpoxwqwfsfx Ah Hop Main Drive Number of axis 4 Movement X-Axis Movement 1050 mm Y-Axis Movement 510 mm Z-Axis Movement 510 mm Table Table load 1200 kg Tools Number of index 30 This 4-axis Mazak NEXUS VCN 510C-II was manufactured in 2007. It features a Mazatrol Matrix NEXUS CNC control, X-axis travel of 1050 mm, Y-axis travel of 510 mm, Z-axis travel of 510 mm, and a 4th axis KITAGAWA rotary table. The machine has a table size of 1300 × 550 mm and can handle a maximum load of 1200 kg. Consider the opportunity to buy this Mazak NEXUS VCN 510C-II vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 7000 kg Movement X-Axis Movement 1020 mm Z-Axis Movement 510 mm Y-Axis Movement 610 mm Control Unit Brand FANUC Model 0i-MD Hedpfxsxwqqrj Ah Hofp Main Drive Spindle Speed 12000 RPM Spindle motor power 18.5 kW Tool taper BT 40 Table Table load 600 kg This 4-axis Dugard 1000Y Plus was manufactured in 2011. It features a table size of 1200 × 600 mm, a maximum table load of 600 kg, and a tool magazine capacity of 30 tools. The machine includes a fourth rotary axis and is equipped with a FANUC 0i-MD control. If you are looking to get high quality milling capabilities consider the Dugard 1000Y Plus machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2016, operating hours: 9,025 h, functionality: fully functional, Kunzmann BA 1000 machining center (2016) Manufacturer: Kunzmann Type: BA 1000 Year of manufacture: 2016 Control: Heidenhain iTNC 530 HSCI Condition: used, good, in production X-travel 1020mm Y-travel 620mm Z-travel 610mm Feed 15m/min Rapid traverse 30/30/24 m/min InLine milling spindle 1-12000rpm Tool holder ISO 40 DIN 69871 Tool magazine 32 slots Clamping table 1200×610 mm 6 T-slots 18 H 8 Table load 850kg Automatic central lubrication Spindle oil cooler Chip flushing hose Spindle blow-out system Coolant device Hinged conveyor belt (right or Left) IKZ 25 bar Internal cooling by air Handwheel HR410 Infrared button TS632 Power consumption 35kVA Length 450cm Width 230cm Height 260cm Hedoxwmcdopfx Ah Hsfp Weight 7800kg Without clamping device

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 850 kg, table width: 1,020 mm, table length: 610 mm, table load: 850 kg, overall weight: 8,400 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 9,200 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 32, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This extremely robust Kunzmann BA 1000 is in excellent condition and can be seen in operation in our showroom. It is a relatively compact machine, yet with a large working area (X:1020 mm - Y:620 mm), a table size of 1200x610mm, and a weight of 8,400kg. Hedpoxwk Nnsfx Ah Hofp The machine is equipped with: chip conveyor, electronic handwheel, rinsing gun, Losma mist extraction system, Step-Tec spindle, Heidenhain TT 140 height gauge, 3 modular machine vices, 32 high-quality tool holders including cutting tools, and the original documentation.

Condition: used, Year of construction: 1992, x-travel 1000 mm y-travel 500 mm z-travel 700 mm table surface area 1250 x 700 mm spindle tunring speed 20 - 3.200 U/min main drive motor 22 kW quill stroke 100 mm distance spindlenose - table min./max. 138/600 mm Feed ( x / y / z) 3.000 mm/min rapid traverse ( x / y / z ) 60/50/60 m/min total power requirement 27 kW In our opinion, the machine is in very good used condition and can be viewed under power by appointment. Hodpfxsxwdw Se Ah Hjfp Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, VERTICAL MACHINING CENTER "FAMUP" MOD. MC 120/60 X-axis travel: 1200 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Rapid traverse X-Y-Z = 40-40-40 m/min Spindle: 12,000 rpm, 22.5 kW Hfodpfx Ahexwclhj Hjp ISO 40 - DIN Table size: 1380x600 mm Max. permissible load: 800 kg Tool magazine: Random, 30 positions Control: SELCA S4045 PDH

Condition: excellent (used), Year of construction: 2014, operating hours: 17,326 h, functionality: fully functional, machine/vehicle number: 1111048, travel distance X-axis: 1,016 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, Haas TM-2P CNC Milling Machine (Used, Excellent Condition) The machine runs perfectly, with several options unlocked and the potential to enable additional features. Originally purchased as one of our first machines, it has seen minimal use in recent years as our production expanded to larger models Technical Specifications Travels (X / Y / Z): 1016 × 406 × 406 mm Spindle to Table Distance (Min–Max): 102 – 508 mm Table Dimensions: 1466 × 267 mm Maximum Table Load: 159 kg Spindle Speed: 6000 rpm Spindle Power: 5.6 kW Taper: BT40 Tool Changer: 10-position carousel Maximum Tool Diameter: 89 mm (adjacent) Maximum Tool Weight: 5.4 kg Hjdpjxv U Ulefx Ah Hofp Coolant System: 45-gallon (170 L) tank with 1 hp (0.75 kW) pump Flow rate: 12 gpm at 30 psi (45 L/min at 2 bar) Labyrinth design prevents chips from reaching the pump Chip Management: Chip auger and tray filter kit Maximum Feed Rate (X/Y/Z): 10.2 m/min Control: Haas CNC

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 540 x 535mm, Table 1200 x 540mm, Spindle speed 8000 rpm, Spindle taper BT50, Spindle Motor 20kW, FANUC I series Control, Hjdpexv Udgjfx Ah Hsfp 24 Station ATC, through spindle coolant, swarf conveyor, Low Volt light.

Condition: good (used), Year of construction: 2014, Traverses XYZ: 1020 x 610 x 610mm, table size 1200 x 600mm, Heidenhain TNC620 Control, BT40 spindle taper, Hfodpfx Aoxv S Ezsh Hep 30 station tool changer, Spindle speed 12,000rpm, Spindle motor power 18.5kW, Through Spindle Coolant, Low volt light, Nikken 4th Axis Rotary Table

Condition: ready for operation (used), Year of construction: 2010, Control Unit Hedpjxv Eyxjfx Ah Hofp Brand HEIDENHAIN Model TNC 530 Main Drive Number of axis 3 Spindle Speed 10000 RPM Tool taper ISO 40 Movement X-Axis Movement 1016 mm Z-Axis Movement 710 mm Y-Axis Movement 610 mm Table Table load 700 kg This 3-axis MAS MCV 1016 QUICK was manufactured in 2010. It features a table size of 1300 × 600 mm, with a maximum travel of 1016 mm in the X-axis, 610 mm in the Y-axis, and 710 mm in the Z-axis. The spindle supports a speed range of 20–10000 rpm with stepless speed change. It can handle a maximum table load of 700 kg. If you are looking to get high-quality milling capabilities consider the MAS MCV 1016 QUICK machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2023, General Data Measurements width 2740 mm Measurements depth 3605 mm Measurements height 2855 mm Machine weight 6950 kg Control Unit Brand SIEMENS Model Sinumerik one Main Drive Spindle speed range 12000 Spindle motor power 9 kW Number of axis 4 Movement X-Axis Movement 1100 mm X-Axis Rapid Traverse 24 m/min Y-Axis Movement 550 mm Y-Axis Rapid Traverse 24 m/min Z-Axis Movement 510 mm Z-Axis Rapid Traverse 24 m/min Table Table load 1700 kg Tools Type of tool holder SK40 DIN 69871 Additional Equipment Chip Conveyor in Scraper Belt Design Coolant Spray Gun Hfodpfx Ahexv Eylj Hop Internal Coolant Supply 20 Bar Bed Flushing via M-function This 4-axis DMG MORI M2 vertical machining center was manufactured in 2023. It features a spindle speed range of 20 to 12,000 rpm, a tool magazine for 24 tools, and a chip conveyor. The machine offers a travel path of X/Y/Z - 1100/550/510 mm and a table size of 1400 x 600 mm. If you are looking to get high-quality milling capabilities, consider the DMG MORI M2 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2004, operating hours: 21,066 h, General Data Machine weight 10500 kg Hedpfxoxv Ezve Ah Hsfp Main Drive Spindle Speed 12000 RPM Spindle motor power 216 kW Number of axis 3 Control Unit Brand HEIDENHAIN Model intc530 Movement X-Axis Movement 1000 mm Z-Axis Movement 550 mm Y-Axis Movement 700 mm This 3-axis Huron KX 10 SP was manufactured in 2004. It features a HEIDENHAIN iTNC 530 control unit, a working range of 1000 x 700 x 550 mm, and a table size of 1200 x 700 mm. The spindle operates at speeds up to 12,000 rpm with a power of 21.6 kW. It includes a 20-tool magazine and has a machine weight of 10,500 kg. If you are looking to get high-quality milling capabilities consider the Huron KX 10 SP machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 1998, General Data Hfodpfx Ahexv Ezio Hop Machine weight 9000 kg Control Unit Brand OKUMA Model OSP 700M Main Drive Number of axis 4 Movement X-Axis Movement 1050 mm Y-Axis Movement 560 mm Z-Axis Movement 450 mm This 4-axis Okuma MX 55 VB was manufactured in 1998. It features a CNC OSP 700M, a table size of 1300 x 560 mm, and movements of X 1050 mm, Y 560 mm, Z 450 mm. It includes ISO 50 tooling and a 4th axis. Consider the opportunity to buy this Okuma MX 55 VB vertical machining centre. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 630 mm, FOR SALE HARTFORD LG 800S MACHINING CENTER, YEAR 2007 Axes: 3 Travel (X x Y x Z): 800 x 510 x 630 mm Max. workpiece weight: 500 kg Hjdpexvz Tnefx Ah Hjfp Weight: 5,800 kg Working area (X x Y x Z): 950 x 510 mm CNC: FANUC A1100

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, MAZAK VCN 410A Nikken 5AX-201 rotary table, 5-axis in continuous mode except tilt, which is managed via the Nikken x21 remote control Table diameter: 200 mm Travels: 560 x 410 x 510 mm Table size: 900 x 410 mm 30-tool magazine Spindle: 12,000 rpm Hfedpfexvra Ssx Ah Hsp Chip conveyor

Condition: ready for operation (used), Year of construction: 2017, operating hours: 4,757 h, General Data Measurements width 2794 mm Measurements depth 2235 mm Measurements height 2692 mm Machine weight 5670 kg Hsdsxvfi Tjpfx Ah Hjfp Control Unit Brand HAAS Main Drive Spindle speed range 12000 Number of axis 4 Movement X-Axis Movement 1016 mm Y-Axis Movement 508 mm Z-Axis Movement 635 mm Workpiece Workpiece weight 794 kg Tools Max weight 5.4 kg Max tool diameter 76 mm Max tool length 330 mm This 4-axis HAAS VF-3SS vertical machining center was manufactured in 2017. It features a 1016 mm X-axis travel, 508 mm Y-axis travel, and 635 mm Z-axis travel. The table supports up to 794 kg, with dimensions of 1219 mm by 457 mm. It includes 24 tool pockets and achieves a maximum spindle speed of 12,000 RPM. Consider the opportunity to buy this HAAS VF-3SS vertical machining center. Contact us for more information about this machine. Application Types Milling