PHU KORA Sp. z o.o.

Condition: excellent (used), Year of construction: 2000,

Condition: excellent (used), Year of construction: 2011, functionality: fully functional,

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable Gbedpfxjx Tqgbj Ag Rjg - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Replay 35 The Minipack Replay 35 EVO is a manual hood shrink wrap machine designed for small production volumes where space is limited. Manual tabletop shrink wrapping machine Power supply: 230 V, single-phase (optionally 120 V) Installed power: 2.0 kW (230 V) / 2.25 kW (120 V) Maximum current: 8.6 A (230 V) / 19 A (120 V) Sealing bar usable dimensions: 380 × 250 mm Maximum product dimensions: 350 × 240 × 140 mm Maximum film roll dimensions: Ø 200 × 350 mm Machine dimensions (closed): 935 × 620 × 540 mm Machine dimensions (open): 935 × 620 × 540 mm Gbedpox Tqf Defx Ag Reg Machine weight (net/gross): 49 / 63 kg

Condition: new, functionality: fully functional, FLAIG Permanent Magnetic Chuck 300 x 150 x 51 mm, type PMSF/PMNM, with ultra-fine transverse pole division, magnetic system with neodymium magnets, fine pole spacing, removable key, maximum holding force 100 N/cm², magnetic field height 5 mm, pole plate wear allowance 6 mm, weight 19 kg, for clamping the smallest thin-walled workpieces for grinding and EDM work, ideally suited for pallet systems due to its very low dead weight. Gbsdpfx Aex Tqfkeg Rsg

Condition: ready for operation (used), Year of construction: 2012, power: 30 kW (40.79 HP), Extraction system Hocker Polytechnik type MultiStar JP5, year 2012, volume 20,000 m³, motor 30 kW, with briquetting press BrikStar c-3 18, with control system, with heated channels, with accessories, with negative pressure. Gbedpfjx Tqd Tsx Ag Rjg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: ZQ10149, We are selling a BERNARDO gear-driven pillar drilling machine GB 30 Vario, year of manufacture 2019. The machine is in very good condition. Operating manual and safety handbook are available. All prices are net plus statutory VAT. Gbodpfxsx Tqdyj Ag Reg

Condition: excellent (used), Levigaltecnica Mikro SR/RTC/1100 Wide Belt Sander Working width: 1100 mm Working height: 3-160 mm Number of sanding units: 2 Unit with rubber roller Combi unit with sanding pad Optical oscillation Godpfx Agex Tqdtj Rebg Electric height adjustment Abrasive belt dimensions: 2150×1170 mm Two feed speeds

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, fuel type: electric, color: grey-black, operation weight: 125 kg, Equipment: second-hand vehicle warranty, KARCHER KM 75/40 W Bp SWEEPING MACHINE NEW SONNENSCHEIN 12V 55Ah GEL BATTERIES (2x) Manufactured in 2016 A new cylindrical brush combined with a new side brush provide excellent sweeping results. New rubber guards around the main roller ensure dust-free sweeping. High surface coverage of up to 3,375 m²/h. A telescopic handle makes it easy to remove the dust container. The machine is in perfect visual and technical condition. The device has undergone a complete, meticulous technical overhaul. Each device we offer has individually taken photos; you are buying exactly what you see. Gbedpfox Tqdmox Ag Rjg TECHNICAL DATA: Power supply: battery-powered Drive power (W): 400 Theoretical capacity (m²/h): 3375 Working width (mm): 550 Working width with 1 side brush (mm): 750 Dustbin capacity (l): 40 Gradeability (%): 12 Working speed (km/h): 4.5 Filter surface area (m²): 1.8 Weight, ready to use (kg): 125 Dimensions (L x W x H) (mm): 1430 x 750 x 1190 INCLUDED: NEW GEL BATTERIES SONNENSCHEIN 12V 55Ah (2x) NEW PPL 1.0 cylindrical brush (hard) NEW PPL 1.2 + 0.4 side brush (medium) NEW roller guards Air filter Waste container

Condition: good (used), mileage: 827,593 km, power: 375 kW (509.86 HP), first registration: 08/2017, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2017, Equipment: AdBlue, EBS, electric window regulation, fridge, power mirror, second fuel tank, Technical information Number of cylinders: 6 Axle configuration Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle 1: Lift axle; Steering; Suspension: air suspension Rear axle 2: Double wheels; Suspension: air suspension Weights Empty weight: 9.011 kg Carrying capacity: 16.689 kg GVW: 25.700 kg Condition Gbsdpox Tqdgjfx Ag Reg Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information

Condition: new, first registration: 01/2026, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,450 mm, fuel: diesel, color: white, emission class: euro6, number of seats: 7, Equipment: ABS, air conditioning, airbag, central locking, GUARANTEED USED VEHICLE!!! Contact: For more information call: 3441197960 – 030933077 Franco / Nicola Follow us on Facebook and Instagram. Specifications: IVECO DAILY 35C16 3.0 CC NEW DOUBLE CAB 7-SEATER CHASSIS, WHEELBASE 3450mm, PACK BUSINESS AND PACK CONSTRUCTION Fitted accessories: ABS, Airbag, Electric windows, Radio, On-board computer, Central locking, Traction control, Air conditioning, ESP, CD player, MP3, Suspension seat, Power steering, Steering wheel controls. Rossini Service: Founded in 1960 as a FIAT / OM workshop, since 1992 Rossini Service has been an ISO-certified authorized IVECO service center. Our qualified and specialized staff have decades of experience in repair and fine-tuning of cars and industrial vehicles from any manufacturer. Every vehicle from Rossini Service is thoroughly inspected and carefully prepared before delivery. Godpfsx Tqdaex Ag Robg

Condition: excellent (used), machine/vehicle number: VF624GPA000023814, mileage: 950,757 km, power: 331 kW (450.03 HP), first registration: 06/2008, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, total length: 6,000 mm, total width: 2,500 mm, total height: 4,000 mm, Year of construction: 2008, Equipment: ABS, air conditioning, differential lock, electric window regulation, power mirror, spoiler, = Additional options and accessories = - 1 fuel tank - 1 sleeping place - Airbag - Armrest - Disc brakes - Front suspension: Leaf - High sleeping cabin - Open roof - PTO - Rear suspension: Air - Roof Spoiler - Sleeper cabin - Sper - Spoilers = More information = Tyre profile: 50% Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Suspension: air suspension Technical condition: very good Visual appearance: very good Gbodpsx Tqc Asfx Ag Rjg

Condition: excellent (used), axle configuration: 3 axles, first registration: 03/2025, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, wheelbase: 9,410 mm, color: blue, Year of construction: 2025, Equipment: ABS, = Additional Options and Equipment = - Air suspension = Notes = Cuppers double-deck tautliner MY: Cuppers double-deck tautliner Brand: Cuppers Model: SO 12-27 L Chassis number: XL9SO1227RC053027 Registration: OV-36-RR LxWxH: 13.65 x 2.55 x 4.00 m Internal LxWxH: 13.50 x 2.46 x (2 x 1.30) m Fifth wheel height: 0.97 m Maximum coupling load: 12 t Maximum axle loads: 27 t Maximum gross weight: 39 t Unladen weight: 12,610 kg Axles: 3 x 9 ton SAF axles with disc brakes Tyres: Michelin 445/45R19.5 on Alcoa aluminum wheels Floor: 24 cm Floor, lifting capacity 12 tons, lifting points at 4 corners and in the center, maximum lifting height 2 m. Roof: Edscha sliding roof = Further Information = Axle configuration Suspension: Air suspension Gedpjx Tqbxofx Ag Rsbg Rear axle 1: Alloy rims; Max. axle load: 9,000 kg; Tyre tread left: 90%; Tyre tread right: 90% Rear axle 2: Alloy rims; Max. axle load: 9,000 kg; Tyre tread left: 90%; Tyre tread right: 90% Rear axle 3: Alloy rims; Max. axle load: 9,000 kg; Tyre tread left: 90%; Tyre tread right: 90% Weights Unladen weight: 11,600 kg Payload: 27,400 kg Gross vehicle weight: 39,000 kg Maintenance, History and Condition APK (Technical Inspection): valid until 03.2026 Technical condition: very good Visual condition: very good Identification Registration: OV-36-RR Further Information Please contact VAEX The Truck Traders for more information.

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, Max. cutting length ... 1250 mm Max. plate thickness ... 4 mm Machine weight ... 2600 kg Gsdpfx Agsx Tqbre Rjbg

Condition: good (used), Year of construction: 1986, machine/vehicle number: 205891, Offer 25396 Technical Specifications: - Load capacity: 250 kg Gedpfx Asx Tqbljg Robg - Faceplate diameter: 600 mm - Table height in horizontal position: 910 mm - Faceplate continuously tiltable by hand crank - Faceplate rotational speed electrically variable: 0.2 – 2 rpm - Welding current transmission: 300 A - Drive: 220 V - Right and left rotation - Electric foot switch - Space requirement: approx. W 800 x H 910 x D 1,200 mm - Weight: approx. 150 kg

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: R-00559, load capacity: 20 kg, arm reach: 1,811 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-20iA manufactured in 2013.06. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Gsdpfjx Tqbfox Ag Rjbg Brand: FANUC Model: M-20iA Model Number: A05B-1222-B202 Year of Manufacture Robot: 2013.06 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 1811 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 250   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2013.06 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: good (used), axle configuration: 3 axles, first registration: 02/2002, suspension: air, color: black, Year of construction: 2002, Make axles: SAF Brakes: disc brakes Gjdpfx Ajx Tqa Ueg Robg Suspension: air suspension Empty weight: 3.960 kg Carrying capacity: 34.040 kg GVW: 38.000 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: F876E01576L, Year of construction: 2013, operating hours: 16,860 h, load capacity: 12,000 kg, lifting height: 5,250 mm, fork length: 3,250 mm, fork width: 2,370 mm, empty load weight: 16,350 kg, TECHNICAL DETAILS Lifting capacity: 12,000 kg Lifting height: 5,250 mm Clearance height: 4,500 mm Fork length: 3,250 mm Maximum fork width: 2,370 mm Minimum fork width: 710 mm MACHINE DETAILS Fuel type: Diesel Number of wheels: 6 Attachment: Sideshift, fork positioner Dimensions & Weight Dimensions (L x W x H): 4,350 x 2,500 x 4,500 mm Unladen weight: 16,350 kg Godpfx Agsx Tqanj Rebg Operating hours: 16,860 h EQUIPMENT Pneumatic tyres Full cab Work lights License plate Heater Documentation CE marking

Condition: refurbished (used), functionality: fully functional, Heavy duty ball valve pump Bottom ported Capacity: max. 988 LPM Solids handling: max. 22 mm Discharge pressure: max. 8.6 bar Displacement per stroke: 6.81 liter Connection style: 3" 125# ANSI Pipe size: 80 mm Gsdpfex Tqahex Ag Rebg

Condition: excellent (used), Year of construction: 2012, Used machine from business closure. Gbsdex Tp U Repfx Ag Rjg GROSS shredder - Model GAZ 62 - Year of manufacture: 2012 - 18.5 kW - good condition - available immediately

Condition: good (used), Year of construction: 1997, machine/vehicle number: 1704, Offer 25509 Godpsx Tp Uqjfx Ag Rjbg Technical Data: - Workpiece clamping diameter up to 150 mm - Maximum clamping height with punch grinding device 130 mm - Grinding wheel diameter: 125 mm - Grinding wheel width: 26 mm - Cutting speed: 20 m/s - Workpiece rotational speed: 40 rpm - Infeed rate: 0.1 mm/min - Grinding spindle speeds: 2800 - 3600 rpm - Regrinding allowance per cycle: 0 - 0.5 mm - Drive 400 V / 1.1 kW - Coolant system - Space requirement approx.: W 600 x H 1800 x D 600 mm - Weight approx.: 150 kg

Condition: repair required (used), functionality: limited functionality, machine/vehicle number: 30740, mileage: 591,608 km, power: 309 kW (420.12 HP), first registration: 12/2016, fuel type: diesel, empty load weight: 7,507 kg, maximum load weight: 10,493 kg, overall weight: 18,000 kg, tire size: 385/55 R 22,5 u. 315/70 R 22,5, axle configuration: 4x2, wheelbase: 3,790 mm, fuel: diesel, fuel tank capacity: 290 l, brakes: intarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, Year of construction: 2016, Equipment: ABS, AdBlue, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, hill-start assist, lane keeping assist, navigation system, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, soot filter, spoiler, tachograph, traction control, Vehicle number # 30740 Euro VI Active Space Intarder Wheelbase 3,790 mm Rear axle air suspension Tyres 385/55 R 22.5 and 315/70 R 22.5 290 L tank Differential lock AS-Tronic Air conditioning Parking heater Gbodpfx Agsx Tp Uks Rsg Stationary air conditioning Cruise control Traction control Full spoiler kit 2 bunks Air-sprung driver's seat/heated Refrigerator Iveco infotainment system incl. navigation system Air-sprung cab Multifunction steering wheel On-board computer Headlamp cleaning system ACC adaptive cruise control AEBS emergency brake assist LDWS lane departure warning system Hill start assist DSE + DSA Sun visor Central locking with remote control Electric windows, dual control Electric, heated external mirrors Fog/work lights LED daytime running lights Diesel particulate filter PTO pre-installation Left sun blind Electric front sun blind

Condition: like new (used), mileage: 20,000 km, first registration: 10/2022, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, airbag, onboard computer, GUARANTEED USED!!! Contact: For further information call: 3441197960 – 030933077 Franco / Nicola Follow us also on Facebook and Instagram. Gbedpsx Tp Udsfx Ag Rsg Specifications: IVECO DAILY 35C16 3.0 CC BOX VAN WITH TAIL LIFT EURO6D-TEMP Standard accessories: ABS, Airbag, Electric windows, Car radio, On-board computer, Central locking, Traction control, Air conditioning, ESP, CD player, MP3, Suspension seat, Power steering, Steering wheel controls. Usable internal dimensions mm: Length 4270 Width 2080 Height 2150 Rossini Service: Founded in 1960 as a FIAT / OM workshop, since 1992 Rossini Service has been an ISO-certified IVECO authorized service center. Our highly qualified and specialized staff have decades of experience in the repair and servicing of cars and industrial vehicles of any make. Each Rossini Service vehicle is thoroughly inspected and serviced before delivery.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516216E01248, Year of construction: 2014, operating hours: 6,341 h, load capacity: 2,000 kg, lifting height: 3,250 mm, free lift: 1,640 mm, fork length: 1,590 mm, fork width: 890 mm, TECHNICAL DETAILS Lifting capacity: 2,000 kg Lift height: 3,250 mm Free lift: 1,640 mm Godpfsx Tp T Hsx Ag Rebg Fork length: 1,590 mm Maximum fork width: 890 mm Minimum fork width: 370 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 2,051 mm x 1,149 mm x 2,160 mm Weight: 3,448 kg Number of wheels: 4 Drive: Electric Battery type: 625 Ah, 48 V Battery test result: 52% Year of manufacture (battery): 2017 Operating hours: 6,341 h EQUIPMENT Fork adjustment Side shift Work lights Free lift

Year of construction: 1993, condition: ready for operation (used), Edging line DK 90 TL In operation until 18.12.2025 Consisting of: Infeed roller conveyor DK90 (incl. various saw sleeves) Slab separator ASV Machine professionally dismantled and ready for loading Gedpsx Tp Tmofx Ag Robg