private entrepreneur Hrigoriev E.V.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Two-crank mechanical press with a rigid frame structure. Manufactured by: SIMPAC INC., South Korea – 2019. 3-in-1 feeder line TAE IN TECH TNCL-5042 with an unwinder. Pressing force: 300 tons. Maximum pressing point (R.T.P.): 6.0 mm before the lower dead center. Slider stroke: 250 mm. Working speed: 22 – 45 strokes/minute (continuously adjustable with a frequency converter). Maximum die height: 650 mm. Slider adjustment: 120 mm. Work table: 2650 x 1100 mm, thickness 200 mm. Slider: 2350 x 1000 mm. Air pressure: 5 bar. Overall dimensions (L x W x H): 3600 x 2800 x 4650 mm. Machine weight: 50,000 kg. Motor power: 37 kW. Total weight of the line: approximately 56 tons. Iodpey Twk Tsfx Aa Ijth Total power consumption of the line: approximately 55-60 kW.

Condition: used, Year of construction: 1980, Arisa press with 40-ton pressing force Isdeyyq H Ujpfx Aa Ioth

Condition: ready for operation (used), Year of construction: 1986, machine/vehicle number: 97862034, functionality: limited functionality, pressing force: 100 t, stroke length: 50 mm, working width: 180 mm, installation height: 255 mm, sheet thickness (max.): 5 mm, TECHNICAL DETAILS Press force: 100 t Total force: 1,000 kN Ring tooth force: 40 - 310 kN Counterholder force: 10 - 270 kN Max. material width: 180 mm Max. material thickness: 5 mm Stroke rate (min.): 20 rpm Stroke rate (max.): 80 rpm Stroke: 50 mm Feed unit Max. strip thickness: 5 mm Max. strip width: 180 mm Max. feed length per ram stroke: 999.9 mm Tensile force per feed (starting force): 6 kN Clamping force: max. 19 kN Max. feed height adjustment: +40 mm Max. distance between feed rollers: 20 mm Resolution, related to rollers: 0.1 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Connected load: 13.5 kW Pump power: 3 kW Motor power: 3 kW Air connection: 6 bar Height adjustment type: hydraulic Dimensions & weight Dimensions (H x W x D): 2,420 x 2,325 x 1,665 mm Installation height: 255 mm Weight: approx. 6 t Year of last overhaul: 1997 Itjdpfx Asytcd Rea Ieh EQUIPMENT Decoiler unit Two sets of tools Note: Further technical data for the machine can be found in the attached operating manual. The seller has repeatedly experienced issues with the processing and blow-off cycle. As a result, parts were not cleared out and the machine was stopped for safety reasons. However, the seller assumes this is merely a matter of adjustment. The seller recommends an overhaul of the control system in the long term.

Condition: used, Year of construction: 1989, Erfurt press with 160-ton capacity, currently disconnected and drained, ready for transport. Itjdsxyp Axepfx Aa Ioh

Condition: used, Year of construction: 1999, Press force 250 tons, currently disconnected and ready for transport, table 1.5 x 1 m, in good condition. Isdpfswvbilex Aa Ieth

Condition: excellent (used), Year of construction: 1987, pressure 320 t plate thickness 0 mm no. of strokes 80 Hub/min pressing capacity total 320 t stroke 30 - 80 mm table surface area unten: 630 x 740 mm table surface area oben: 630 x 630 mm total power requirement 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in new condition with new CE mark MAIN RAM total force (nominal) 320 to stroke min. 30 mm stroke 80 mm V-RING nominal force 160 to stroke 30 mm COUNTER RAM nominal force 80 to stroke 30 mm TOOL DIMENSIONS lower table - width 630 mm lower table - depth 740 mm upper table - width 630 mm Itjdpfx Aovwgl Nea Ijh upper table - depth 630 mm daylight max. 320 mm ELECTRICAL SPECIFICATIONS total power consumption 60 kW

Condition: used, Year of construction: 2001, machine/vehicle number: 01/2437, Capacity: 250 ton V – Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 67 mm Table surface area : 560 x 600 mm Itjdpfxsu U Nims Aa Ioh Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg Standard configuration Automation roll-off try with leveller

Condition: used, Year of construction: 1996, machine/vehicle number: 7/4986, Capacity: 250 - 400 ton V – Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Daylight: 760 mm Ram surface: 800 x 800 mm Table surface: 810 x 1000 mm Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Itodpfx Aasuqdxio Ijh Approach speed: 120 mm / sec Return speed: 135 mm / sec Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg Standard configuration Automation roll-off try with leveller

Condition: good (used), I sell Fein MSfv 649 Angle grinder with long neck. In bdb condition Isdpfx Asuhm I Hja Ioth