Kaimo GmbH

Condition: excellent (used), FORMAT 4 Tempora 60.06 edge banding machine with glueBox – used Touchscreen, swiveling control panel, program memory, automatic adjustment of pressure beams, feed via transport chain, extendable workpiece support, diamond flush-trim cutter with both forward and reverse rotation, glue reservoir located underneath, changeover device for glue reservoir, use of PUR adhesives possible, GLUEBOX, pressure unit with driven roller, Gbsdpfxj Akdahe Abijw miter saw with 2 HF motors, miter saw pneumatically swiveling, flush/radius trimming unit, motorized positioning control for trimming unit, x-motion PLUS, corner copying unit with diamond-coated cutter, radius trimming blade, radius trimming blade with motorized positioning, edge trimming blade, program-controlled edge trimming blade, infeed stop, spray system for release agent, spray system for lubricant, spray system for cleaning agent, year of manufacture 2022 ----- Technical data ----- Edge thickness, roll material: 0.4 - 3 mm, Edge thickness, strip material: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, min. workpiece length: 140 mm, Feed speed: 10 m/min, Screen diagonal: 15 inches, Dimensions of flush-trim cutter: D 80 x 64 mm, Power of flush-trim cutter: 1.1 kW, Power of miter saw: 0.35 kW, Power of trimming station: 0.75 kW, Dust extraction port Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Overall length: 4,872 mm, Dimensions (L x W x H): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - all settings checked - adjusted according to manufacturer's specifications - complete basic inspection - complete basic cleaning - electrical system checked - pneumatics checked - ready for immediate use

Condition: good (used), Year of construction: 2022, 0,4 - 3 mm Workingpiece thickness from to 10 - 45 mm Total length ca. 2.800 mm Feed speed 8 m/min. total power requirement ca. 7,1 kw Gsdpfx Abj Ai Ufgjijbw

Condition: like new (used), Year of construction: 2022, overall weight: 7,000 kg, OTT Edgebanding Machine, TYPE TopEdge DUO Operating mode: Single-sided, right-hand configuration. For applying and processing: Veneer, plastic, and solid wood edges. Edge thickness: 0.2 - 25 mm Workpiece dimensions: Width minimum 60 mm Height minimum 8 mm Height maximum 80 mm Length minimum 150 mm Feed speed: 10 – 20 m/min – stepless Machine dimensions: Machine height: 1,750 mm Machine width: 1,300 mm Machine length: 12,700 mm Machine weight: 6800 kg Trans-Start – OTT workpiece feeding system with automatic, angle-accurate transfer to the feed system of the edgebanding machine, consisting of: – extended infeed guide rail with additional clamping – angle insertion aid (small parts, manual) – top-mounted, infeed system – driven Joint from the center 2 x 3KW AKF – Automated Copy milling with two separate spindles for the top and bottom. For radius processing of the front and rear end faces or postforming processing. Milling heads equipped with two automated adjustment axes for depth and end face adjustment, as well as with automated edge thickness adjustment. Detailed settings can be stored in work programs. With 2 PCD diamond radius tools Ø 73 x 13 x Ø 16 2 HF motors 0.37 kW, 12000 rpm, 200 Hz. With integrated extraction system. Unit prepared with a quick-change system for Godpfx Abs Ai T Nvsijbw special profiles! 4-way radius trimming unit - DUO-Combi-Melt Gluing system Two Combi-Melt gluing systems with pressure zone and trimming device, both equipped with a WRT 125 A exchange hopper system. First station: PUR glue, transparent Second station: PUR glue, white First pressing zone equipped with: A large pressure roller and six follow-up rollers. Second pressing zone equipped with: A large pressure roller and three follow-up rollers. Both gluing systems can be controlled independently. Any number of work programs can be stored alphanumerically, with all pre-selections for the processing units as well as work parameters for the Combi-Melt gluing system for full automation and maximum ease of operation. 1 x Double magazine 1 x 8+1 edge magazine Trimming unit for thin boards and processing with high edge overhang Spraying units GS, AS, RS with texture finish Preparation for return system Angle insertion aid Grooving units Special pressing unit for processing solid wood strips up to 25mm thick. Pictures are only partially original images!

Condition: used, Year of construction: 2011, machine/vehicle number: T/41333, functionality: fully functional, power: 17.5 kW (23.79 HP), For sale, on behalf of the rightful owner, is the following edge banding machine: Manufacturer: Paul Ott Model: Tornado-Top Year of manufacture: 2011 Operating hours: approx. 850 (according to the control panel) Rated power: 17.5 kW Equipment: see images For further information or questions regarding the machine, please do not hesitate to contact us. The machine can be tested while powered on. Subject to prior sale. All information is provided without guarantee. Gjdpfx Aj Ai T Nkobisbw

Condition: ready for operation (used), Year of construction: 2008, Edgebander manufactured in 2008. This BRANDT OPTIMAT KDF 350 C has a total of 1,119.21 operating hours. If you are looking to get high-quality edgebanding capabilities, consider the BRANDT OPTIMAT KDF 350 C machine we have for sale. Contact us for further details. - Control Software Version: V.2.43- Total Operating Hours (Gesamt Stunden): 1119.21 h- Current/Reset Operating Hours (Stunden): 1.43 h- Total Workpieces Processed (gesamt Werkstücke): 94,963 pcs (Stck)- Current/Reset Workpieces Processed (Werkstücke): 1,181 pcs (Stck)- Voltage: 400 V- Control Voltage: 24 V- Frequency: 50 Hz- Phase: 3~+N / 3~- Fuse Rating: 25 A Gjdpfj Ai Txzsx Abiebw

Condition: used, Year of construction: 2004, - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Edge banding machine Manufacturer: Brandt Type: KDF 560 Year of manufacture: 2004 Technical data - Voltage: 400 V / 50 Hz / 3 phases - Connected load: 13.2 kW - Fuse rating: 35 A Equipment - Automatic unit adjustment via the PC control system - Control: Brandt Power Control PC20+ - Suitable for thin and thick edges (ABS, PVC, veneer, and solid wood edges) - Edge thickness: approx. 0.4 to 8 mm - Workpiece height: approx. 8 to 50 mm - Feed speed: 14 m/min Godpfx Ao Ai S I Dobiobw Installed units - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Hebrock k36 airtronic edge banding machine Well-equipped, can be inspected before purchase. Features: PRE-MILLING cutters, Edge banding with roller application, Includes glue dispensing valve, The glue pot is replaceable, A second pot is included, Airtronic system, Pneumatic pre-milling guillotine, Pressure rollers, Trimming saw for final cutting, Features: Two R1 – R2 up-and-down milling units, 3-point pneumatic adjustment, Gbodpj Ai Sxbjfx Abijw Includes two replaceable corner rounding units R1, R2, Multi R1-R2 profile cycling unit, Features: Flat cycling unit, Polishing unit, Maximum veneer thickness in roll: 3 mm. Very good condition. Year of manufacture: 2024 Operating hours: 1140

Condition: repair required (used), Year of construction: 2018, Edge banding machine Manufacturer: Felder Type: G360 Year of manufacture: 2018 Operating hours: approx. 731 h Gsdj Ai R Izspfx Abiobw Edge thickness: 0.4 - 3 mm Workpiece thickness: 10 - 45 mm Feed rate: 8 m/min Gluing unit: Yes Trimming saw unit: Yes Radius milling unit: Yes Scraper blade: Yes The gluing tank cannot be switched on, or it only rotates for approximately 10 seconds. Afterwards, the overload protection switches off. All other functions are working.

Condition: used, machine/vehicle number: 008811, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Gedpfx Abe Ai N S Hsiobw

Condition: used, machine/vehicle number: 008553, Type of edging: Thin edge, Thick edge, Solid wood Gbsde Ai N Sqopfx Abijw Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: excellent (used), HOMAG KDF650 edge banding machine Top pressure beam for material clamping, Application of liquids, Pre-milling cutters, Glue application, Preheating unit with glue pot QA65N Additional glue pot Pneumatic preliminary trimming guillotine, Pressure rollers Final trimming cutters, Gjdpfx Abj Aiuideiobw R1-R2 top and bottom milling unit 2x R1-R2 corner rounding unit Multi-profile cycling cutter R1-R2 Flat cycling cutter, Application of liquids Polishing unit, Nesting The machine has NC control; all settings and functions are controlled from the control panel. Max. component height: 60 mm, Max. edge band thickness (roll): 3 mm, Feed speed: 8-18 m/min The machine is in very good condition and is only slightly different from a new machine. Operating hours: 1048 h

Condition: used, OTT Tornado - TOP Control system - via a 15-inch color touch monitor for full automation and maximum ease of operation. CM-CombiMelt gluing system – suitable for processing EVA and PUR hot melt adhesives as well as all common cleaning granules. Joint processing unit for attaching chipboard. Automatic roll magazine. Automatic edge magazine. Double-head unit with automatic pivoting 0° / 3°. Flush trimming unit – for flush trimming – 12mm. Fine milling unit RADIUS – for radius milling – profile cutter R2 – R5. Automated contour milling – for rounding corners. Pull knife unit – radius. Surface pull knife unit. Lubricant spray system – PU. Cleaning set with fine wiping device. Very stable workpiece support with roller conveyors – FRONT with scissor lift. Complete tool set included. Machine is in EXCELLENT CONDITION. Machine is from a lease return. First delivery in 2012. Gjdpo Aitllofx Abijbw Available from stock in Lieboch.

Condition: used, Holz Her Sprint 1329 Multi Heavy-duty version - Edge thickness 0.4 - 8 mm (15 mm with tool change) Edge Control 19 control system, 18.5" touchscreen color display 16:9 ECO mode - energy-saving mode fa.s.t. setting technology "Tool change in the gap" iTronic - adaptive pressure and adhesive application control and cleaning routine Motorized, position-controlled bridge height adjustment Long infeed guide rail, motorized, controlled via PLC Pre-milling unit for attachment before the gluing station Edge magazine, fully automatic for coil and strip material Gluing unit GLU-JET GJ301 automatic, cartridge system - granulate + PU adhesive, thin-film technology Edge height max. 65 mm Pressure unit DW 501, motorized-pneumatic, NC servo axis Cutting unit for coil and strip material up to 15 mm edge thickness With electro-pneumatic adjustment for 0-10° bevel of the cutting saw Multi-function milling unit MOT6 – 6 NC control axes, including air blow nozzles Flush trimming 8 mm (15 mm) Radius trimming Chamfer trimming 45° Gbodpfx Abj Aitldeiow Copy milling unit MOT 6 Multi, corner copying, postforming corners with 6 NC control axes, for milling the upper and lower longitudinal edge and copy milling the front and rear end face, vertical edge, working height 60 mm with shelving program, including air blow nozzles Scraping unit MOT6 Multi, including air blow nozzles and chip scraper Surface scraping unit - finishing with pre- and post-scanning, including air blow nozzles Buffing unit for final polishing and edge polishing with 2 textile discs, swiveling 5° Spray device for infeed and outfeed area as well as antistatic agent and lubricant at the pressure unit Infeed area - electronically controlled release agent spray device Before the pressure unit - electronically controlled antistatic spray device After the pressure unit - electronically controlled lubricant spray device Outfeed area - electronically controlled cleaning agent spray device with cleaning agent First delivery 2022, very few running meters, from a craft business Machine is WORKSHOP INSPECTED in TOP CONDITION / Leasing possible Ex works

Condition: used, Holz Her Sprint 1321 FÜ + PU heavy-duty version - edge thickness 0.4 - 15 mm SPS screen control Edgecontrol motorized, position-controlled bridge height adjustment pre-milling unit for attachment before the gluing station fully automatic edge magazine for roll and strip material glue application station, cartridges + PU gluing automatic glue height adjustment / touch probe nozzle pressure unit 1913, pneumatic cutoff unit for roll and strip material 1918 - 15 mm with pneumatic adjustment of the cutoff saw angle from 0-10° multi-function milling unit with motorized adjustment: flush trimming - 15 mm, radius and chamfer milling - 15° flush milling unit - corner rounding 1833 edge trimming unit for chamfers and radii 1929, pneumatic pneumatic infeed and outfeed Gedpfe Aitifex Abijbw surface trimming unit - finish, pneumatic buffing unit for final polishing and edge polishing with 2 textile discs HIGH-END spray system complete tool set Machine is FUNCTIONAL Machine from a craft business / brokerage sale Available from stock in Lieboch, NET € 19,000.00

Condition: used, Holz Her Auriga 1308 XL Black Edition Compact design – edge thickness 0.4 – 8 mm SPS screen control Edge-Control 19 with 18.5" touchscreen monitor “Eco-Mode” energy-saving mode Pre-milling unit for attachment before the gluing section Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU gluing Fully automatic operation of the units via NC servo axes Workpiece height 8-60 mm Automatic glue height adjustment Pressure unit, pneumatic Trimming unit, pneumatic for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of 0-10° bevel on the trimming saw Multi-function milling unit MOT4, flush trimming 8 mm, radius milling - chamfer milling 15° via NC axes ProLock system for quick tool changes Profile milling unit - rounding of edges up to 3 mm edge thickness in a single pass via NC axes Shelf program for shelves with rounded front edges Scraper unit MOT4 for bevels and radii with 2 scraper holders via NC axes, high-gloss package with motorized adjustment of the horizontal guide rollers Surface scraper unit – finishing Buffing unit – polishing Spray system in the infeed and outfeed area Gbedpfo Aitg Djx Abijw Complete DIA tool set included Machine with very few operating hours, from a small workshop First delivery 2018 Machine in TOP condition Available from stock in Lieboch

Condition: used, Holz Her Auriga 1308 XL POWER Compact design - edge thickness 0.4 - 8 mm Motorized bridge adjustment PLC screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and adhesive quantity control, and flushing routine fa.s.t. setting technology "Tool change in position" Long infeed guide with motorized adjustment Pre-milling unit for application before the gluing section Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU adhesive, with sensing nozzle Workpiece height 8-60 mm High-gloss package Pressure unit, pneumatically controlled Trimming unit, pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of 0-10° bevel of the trimming saw Multi-function milling unit FR301 MOT6, flush trimming 8 mm, radius milling – chamfer milling 15° via NC axes Profile milling unit FF301 MOT1 – rounding of corners up to edge thickness 3 mm or alternatively chamfer = 45°, working height 12 – 60 mm, postforming possible Godpfx Aj Aitf Uebiobw Scraping unit ZK301 MOT4, for chamfers and radii with 2 scraping blade carriers via NC axes Surface scraping unit FK701 with pre- and post-sensing - finishing Buffing unit - polishing Spray system in the infeed and outfeed area Spray system with lubricant for high-gloss edges Complete DIA tool set included First delivery 2022 Machine in TOP condition, taken out of service - small business Available from stock, Lieboch

Condition: used, Holz Her STREAMER 1057 CNC + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for adjusting the units Pre-milling unit for edge preparation before the gluing process Fully automatic edge magazine for roll and strip material GLU-JET adhesive application station, cartridges + PU gluing Adhesive application using nozzle technology Workpiece height 6-60 mm Automatic adhesive height adjustment High-quality 3-roller pressure unit, 1st roller motorized Trimming unit, pneumatic, for roll and strip material up to 6 mm edge thickness With pneumatic adjustment of the trimming saw angle from 0-10° Gbedpj Aitdtsfx Abisw Milling unit, flush milling 6 mm, radius milling - chamfer milling - 15° Corner copying unit - 3 mm edge thickness Scraping unit for chamfers and radii with 2 scraping blade holders Surface scraping unit - for finishing Spray device - PU Machine with all processing tools Machine is WORKSHOP TESTED in TOP CONDITION

Condition: used, Holz Her Sprint 1312 FÜ + PU Gbjdpo Aitdasfx Abiow Heavy-duty design – edge thickness 0.4 - 12 mm PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding automatic tracing nozzle Workpiece height 6-55 mm End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-10° angle of the trimming saws Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Scraper unit for bevels and radii with 2 pneumatically operated scraper holders pneumatic infeed and outfeed Flat scraper unit – finishing Spray device – PU Machine in TOP CONDITION Available from stock Lieboch

Condition: used, Hebrock K34 Edge thickness up to 8mm PLC-controlled touchscreen with a 15" touchscreen Pre-milling unit for application before the gluing section (3mm) Gluing station with interchangeable glue containers and glue dispensing system Edge height max. 60 mm Gsdps Aitb Uefx Abisbw Trimming unit Milling unit for flush cutting, radius, and chamfer milling Corner rounding unit for radii/chamfers Multi-radius trimming blade (R1/R2) Nesting Surface trimming blade Release agent spraying system Year of manufacture 2023, 52 operating hours Machine is in NEW CONDITION and in TOP SHAPE From a carpentry workshop liquidation/retirement sale Available from a carpentry workshop, SALES PRICE NET €45,000.00

Condition: used, Year of construction: 2012, functionality: fully functional, premilling unit endtrimmer multiprofilunit Ziehklinge Buffing up to 8 mm edge nc on infeed fence and pressure unit NC on multiprofil unit Gjdo Airyaopfx Abiobw

Condition: excellent (used), Felder TEMPORA F600 edge banding machine Liquids Pre-milling cutters, Roller glue application, Replaceable tank, Second tank included, Pneumatic guillotine for pre-trimming, Gedpfx Abe Aira Hoiebw Liquids, Final trimming cutters, Top and bottom milling unit, Dual unit for corner rounding, Profile edge finishing, Cleaning liquids, Flat edge finishing, Polishing unit, The machine features NC control, Max. element height: 60 mm, Max. veneer thickness (roll): 3 mm, Feed rate: 10 m/min, Inspection and testing on-site are possible.

Condition: used, Year of construction: 1998, edge thickness (max.): 3 mm, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Feed speed: max. 25 m/min Edge thickness: max. 3 mm Panel height: min. 14 mm Panel height: max. 55 mm Panel length: min. 350 mm Number of panel edge trimming and routing units: 3 Panel edge trimming and routing unit 1 Motor power: 7.5 kW Speed: 18,000 rpm Panel edge trimming and routing unit 2 Motor power: 7.5 kW Speed: 18,000 rpm Panel edge trimming and routing unit 3 Motor power: 7.5 kW Speed: 18,000 rpm Gbodpfx Aj Aihx Robijw Number of edge processing units: 3 Cutting unit Number of motors: 2 Motor power: 0.22 kW Speed: 17,250 rpm Fine routing unit for flush trimming and rounding Motor power: 1.5 kW Speed: 8,600 rpm Polishing unit Number of motors: 2 Motor power: 0.18 kW Speed: 1,375 rpm EQUIPMENT Processing of thin edges Processing of thick edges EVA hot melt adhesive system Pressure system with rubber belt Panel alignment system at the infeed 3 routing/hogging units with CNC-controlled positioning Cutting unit Fine routing unit for flush trimming and rounding with CNC-controlled positioning Polishing unit Edge roller magazine with 2 positions Glue tank for EVA hot melt adhesive Pressure roller set with 4 pressure rollers CNC-controlled positioning of the pressure rollers Spray unit CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 3944

Condition: used, Year of construction: 2014, power: 22 kW (29.91 HP), edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, TECHNICAL DETAILS Feed speed: max. 18 m/min Panel height: min. 10 mm Panel height: max. 60 mm Panel width: min. 70 mm Edge thickness: min. 0.4 mm Edge thickness: max. 12 mm Number of processing units: 9 Pre-milling unit Number of units: 1 Motor power: 2.2 kW Edge magazine and gluing Number of magazine positions: 1 Number of pressure rollers: 4 Edge processing units Number of edge processing units: 7 Cutting unit Number of motors: 2 Motor power per motor: 0.35 kW Flush trimming and rounding unit Number of motors: 2 Motor power per motor: 0.55 kW Corner rounding unit Number of motors: 2 Motor power per motor: 0.35 kW Grooving unit Number of motors: 1 Motor power: 3.5 kW Buffing unit Number of motors: 2 Motor power per motor: 0.18 kW MACHINE DETAILS Total connected power: 22 kW EQUIPMENT Processing of thin edges Processing of thick edges Processing of solid wood edges EVA hot melt adhesive system AIRTEK hot air system Overpressure with idle rollers Panel support guides Pre-milling unit with automatic, time-controlled operation Edge roller magazine EVA glue reservoir EVA pre-melter Set of pressure rollers with 4 pressure rollers NC positioning of pressure rollers Cutting unit Flush trimming and rounding unit with NC positioning Corner rounding unit WD60 Grooving unit Edge pulling unit with NC positioning Glue pulling unit Buffing unit Spray unit Machine programming software PowerControl PC20 CE marking Gsdpfx Abe Aihdloiobw The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 7517

Condition: used, Year of construction: 2018, IMA TUBES FILLER COMADIS C945 Tube filling machine with automatic tube feeding, print registration and a heated product hopper. Built in 2018; with only a few working hours. CHARACTERISTICS - Production hopper: 26 L heated hopper with cover (AISI 316L) - Dose adjustment: piston stroke with graduated scale - Dosing unit described: Pneumatic volumetric spear-valve unit, AISI 316; standard range stated as 15-300 ml - Product level control: Ultrasonic level regulator; 24 V signal for an external feed pump - Heating system: specified up to 60°C - Scraper stirrer: specified at 35 rpm PARTS - 1 set of Hot Air size parts for tube diam. 16 mm - 1 set of Hot Air size parts for tube diam. 50 mm - 1 set of size parts Delrim (POM) tube holders for tube diam. 16 mm - 1 set of size parts Delrim (POM) tube holders for tube diam. 50 mm Gedpfx Abs Aihdheiebw - 1 coding block with spacers for plastic/laminate tube (8 digits places as standards) - 5 set of digits 0-9 for plastic/laminate tubes PRODUCTION - Mechanical cycles: up to 45/min - Standard tube dimensions: Diameter: 10-50 mm; Length: 60-250 mm - Machine filling-volume range: 2-300 ml nominal platform range; subject to dosing unit and size parts - Mechanical speed: 10-45 cycles/min (actual output depends on application) - Machine layout: 9-station rotary table; 1 filling nozzle

Condition: used, Year of construction: 2006, edge thickness (max.): 3 mm, feed rate X-axis: 11 m/min, rotational speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Panel thickness: max. 50 mm Edge thickness: min. 0.4 mm Edge thickness: max. 3.0 mm Feed rate: max. 11 m/min Number of panel processing/milling units: 1 unit Number of edge processing units: 5 units Pre-milling unit Motor power: 2.2 kW Speed: 1,600 rpm Cut-off saw unit Motor power: 0.18 kW Speed: 12,000 rpm Rough milling unit, top and bottom Gedpfx Abj Aihdajijbw Motor power: 0.27 kW Speed: 12,000 rpm Edge rounding unit Number of motors: 1 unit Motor power: 0.35 kW Speed: 12,000 rpm Edge pulling unit Polishing unit Number of motors: 2 units Motor power: 0.10 kW Speed: 2,700 rpm MACHINE DETAILS Control system: PC 16 EQUIPMENT Pressure roller with idler rollers Edge roller magazine Glue pot for EVA hot-melt adhesive CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8555