Bender Packaging GmbH

Condition: like new (used), The can seamer is the machine used to hermetically seal the lid to the can body before sterilization. Depending on the product, sterilization can also be performed before filling. The can is sealed by deforming and subsequently overlapping the metal layers of the can body and the lid through compression. The result is a type of hook between the two, which achieves a hermetic seal and, consequently, the airtightness of the container. This sealing requires a rubber gasket (sealing gasket) inserted into the rim of the lid to achieve the most effective bonding of the metal layers. Bljdpfjzbi Nijx Alcjh Production will depend on the format and the product to be sealed.

Condition: used, Year of construction: 2019, We are offering this used Wild Goose Canning WGC-CE brewery bottling machine, manufactured in 2019. Top Level BOM number: WG5 Date of manufacture: October 2019 Rated voltage: 230 V Phase connection: single-phase Frequency range: 50 / 60 Hz Full load current: 12 A Short-circuit current rating: 10 kA RMS sym Serial number: WGC-0937 Blsdpfx Aloza Tt Nocsh If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2019, operating hours: 190,711 h, functionality: fully functional, type of input current: three-phase, total width: 2,500 mm, total length: 3,300 mm, total height: 2,000 mm, compressed air connection: 6 bar, filling weight (min.): 400 g, Equipment: documentation/manual, Filling machine for liquid or semi-viscous products, suitable for filling Doypack pouches. In its current configuration, it has been used for filling 200g containers. The machine is equipped with a lid mounting and sealing unit. Bjdpfx Aljza Aimjcslh Further information available upon request.

Condition: good (used), Year of construction: 1998, functionality: fully functional, filling weight (min.): 250 g, filling weight (max.): 1,000 g, Equipment: documentation/manual, MIROMATIC MDA 2-1-C2 Format-independent bucket filling system General information: - Manufacturer: Miromatic - Type: MDA 2-1-C2 - Year of manufacture: 1998 - Condition: Used, good condition - Application area: Filling of thin to pasty food products into buckets and containers - Equipped with a Miromatic fruit mixing system (including pumps, valves, flow meters, etc.) Performance and container sizes - Filling range: 250 g - 1,000 g - Output: up to 1,800 kg/h - Dosing accuracy: ± 0.5 % - Format-independent transport system - Fast format change without special tools Bljdpezav A Hefx Alcsh Equipment and functions: - Automatic bucket feed - Automatic lid feed - Product selection via stored programs - Quantity recording per container and product - Magneto-inductive flow meters with self-correction - Low-foam product filling - Hygienic stainless steel design (V2A) Hygiene equipment - Integrated CIP cleaning system - Automatic cleaning of feed tank and conveyor chain - Steam sterilization of product feed and dosing valves - Laminar flow module with HEPA filtration (cleanroom class 1000) - UVC disinfection of containers - UVC disinfection of lids Application areas The system is particularly suitable for filling: - Yogurt - Sour cream - Fresh cheese - Quark - Desserts - Fine food products - Sauces and dressings - Creamy and pasty food products

Condition: refurbished (used), Benhil 8358 & 8535 Butter Portion Packer with twin filling/ /Stainless steel hopper / 90 degrees Paper Feed / Capacity Up to 510 pcs per minute Benhil 8358 Twin Filling Butter Portion Packer Stations : Paper feed, paper splitting, Paper forming box, Filling , Wrapping, Pressing, outfeed conveyor, semi automatic rotary case Packer . Capacity : 420 -510 pcs per minute depending on Product weight. Fully Refurbished 12 months ago spent over € 200.000 Key Features: - Portion Control: Benhil packing machines are designed to package butter in accurate, portion-controlled sizes, which is essential for food service operations. - Flexible Options: They often accommodate different types of butter packaging, including mini portions or larger units, catering to various market needs. - Automation: Many of these machines feature automated systems for filling, sealing, and labeling, which helps to increase efficiency and reduce manual labor. - Integration: They can typically integrate with other food processing equipment in a production line, such as mixers or chillers. - Customization: Options for customization may be available based on output requirements, packaging materials, and specific market needs. Technical Aspects: - Speed: The packaging speed can vary depending on the specific machine model, with some machines capable of filling hundreds to thousands of units per hour. - Ease of Cleaning: The machines are designed for easy disassembly and cleaning, complying with food safety standards. - Energy Efficiency: Modern Benhil machines may focus on energy efficiency, reducing operational costs. - Durability: Built to withstand high volume production environments, they are made from high-quality stainless steel and other durable materials. Applications: - Food Service: Used in restaurants, hotels, and catering services for packaging butter portions for table use. - Retail: Often used for packaging butter for supermarket sales in portioned formats. Paper feed: 90 degree Hopper: Stainless steel Guards: Electro Guards Case Packing: 5 x 8 x 5 pcs 200 per box Capacity: 420-510 pcs per minute Case Packer: Included Filling Volume: 6 - 20 grams Condition: Fully refurbished 12 months ago Latest Production: 2 months ago Bljdszavu Aopfx Alcoh Electrical Requirements: 3 phase 400 v/50 and 60 hz USA ELECTRICAL REQUIREMENTS: Available upon request Available: Immediately Case Packer Model : 8342

Condition: good (used), Year of construction: 2020, functionality: unexamined, type of input current: three-phase, total width: 970 mm, total length: 2,530 mm, total height: 2,190 mm, overall weight: 850 kg, compressed air connection: 12 bar, Designed for bulk products and powders, it features a dosing head for bulk materials. It has a screw-type filling conveyor. It doses into doypack packaging with dimensions of 190 mm x 230 mm. The equipment was purchased but never put into operation; the project was discontinued. Bodpfjy U Twrsx Alcelh

Condition: ready for operation (used), Year of construction: 2000, Continuously adjustable dosing volume: 60-1050ml, length: 1750mm, width: 650mm, height: 1700mm. Equipment: mounted on a stainless steel frame, mobile with four swivel castors, manual feeding and removal of bottles, self-priming, with a dipping device for the filling tube, automatic circulation cleaning, homogenizing and refining of curd possible, usable products: liquid, pasty, cold and hot milk, yogurt, curd, cream cheese, fondue, honey, salad dressings, mayonnaise, jam, cake batter etc. An on-site inspection is possible, not under power. Bledpfx Aljy Uyd Escjh

Condition: ready for operation (used), Year of construction: 2006, Twelve dosing systems with volumetric progressive cavity pumps ViscoTec (Z and L versions) with collection hopper are available. Dosing volume range: 7.5ml/rev, flow rate range: 75ml/min-937.5ml/min, dosing accuracy: +/-1%, max. speed: 125rpm, max. dosing pressure: 30bar, max. inlet pressure: 10bar. Documentation available. An on-site inspection is possible. Bodoy S A N Sepfx Alcolh

Condition: ready for operation (used), Year of construction: 2012, A large-format can filling and closing machine JBT FoodTech from the food industry is available. Can weight: 750g/1000g, can content: sweetened condensed milk, max. throughput capacity: 600cans/min, filling heads: 22, closing heads: 5, design: monoblock, control system: Siemens. Documentation available. An on-site inspection is possible. Bedoy N Uv Sopfx Alcjlh

Condition: ready for operation (used), Year of construction: 1987, A fully automatic Ferrum can filling and sealing machine is available. Can weight: 397g, can content: sweetened condensed milk, sealing heads: 6, throughput capacity: approx. 250cans/min, machine dimensions X/Y/Z: approx. 2300mm/1550mm/2300mm, weight: approx. 3500kg. The filling bowl has been repaired several times. Documentation available. An on-site inspection is possible. Expected to be available around September 2026. Bsdpfx Alsy N Uvxscjlh

Condition: ready for operation (used), Year of construction: 2010, A modular bucket filling and lidding system Wittmann Robot Systeme is available. Components: bucket stack feeding, bucket stack transfer unit, bucket singulation, rake and filling, stopper, lid feeding, lidding, lid inspection and rotation for the further conveying processes. Number of formats: 6, format distribution round/rectangular, round bucket diameter: 226mm, round bucket height: 194mm, min. rectangular bucket dimensions X/Y/Z: 195mm/299mm/170mm, max. rectangular bucket dimensions X/Y/Z: 302mm/415mm/220mm, bucket volume: 5l/6l/10l/11l/16l. Including the corresponding conveyor units and motors. Documentation available. An on-site inspection is possible. Bsdpfx Aljy N Ddlocelh

Condition: used, incl. cyclone, frame, blower (Image 1 without Heger dust collection silo) 1/7 Frame 1,520 x 1,470 x 2,450 mm 2/7 Pipe package 3/7 Frame 1,500 x 1,500 x 2,800 mm 4/7 Frame 2,600 x 1,520 x 2,400 mm 5/7 Cyclone Bjdpfx Aoy Atr Ejlcolh 6/7 Pipe package 7/7 Blower Additional images available

Condition: ready for operation (used), Waldner dosamat 2.2 cup filling, sealing and capping machine - 2 filling lanes - up to 4,800 cups per hour - cup destacking - piston filler for viscous products Bledsyzyvnopfx Alcoh - seal foil destacker - heat sealing - capping

Condition: ready for operation (used), Year of construction: 2013, A fully automatic cup filler for buckets is available. Design: rotary machine, lanes: 1, filling capacity: approx. 3000 cups/h, filling volume: 850ml/1000ml. The control system and the servo systems of the machine were dismantled and are missing. Documentation available. An on-site inspection is possible. Bedjyx H Ewopfx Alcslh

Condition: used, Year of construction: 2006, Masterfill Filling Machine S 500 The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products. Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards. The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill S 500 integrates seamlessly into existing production lines. Key Features - High-precision volumetric filling system - Suitable for liquid and semi-viscous products - Hygienic stainless-steel construction - Easy-to-use control interface - Adjustable filling speed and volume - Low maintenance and easy cleaning - Compact and space-efficient design Applications - Milk and dairy products - Yogurt and desserts - Cream and sauces - Beverage and liquid food products Materfill S500 6 head fill while rise filler M2-AF Serial number 4716 YOM 2006 Filling capacity 2ml to 2000 ml The filler is a 6 head automatic filler, with the capacity to store 50 separate preset menus, Brief FDS • Controlled by Siemens S7 PLC via Mitsubishi Beijer HMI • Jars feed in vis constant stainless steel slat band • Jars indexed via program-controlled infeed and outfeed pneumatic gates. • Jars filled via positive pressure within 50 ltr holding tank (this could be changed easily to a constant positive pressure into manifold via modulating pump) • Volume controlled via Nixon BNO turbine flow meters communications with siemens high speed counter. • Liquid feeds into jar with rise during fill or above jar for fill time • Full SIP, CIP, and flush capability programs available Dico CapperSerial number 3/379Brief FDS  Capper with rotating starwheel  Will cap Square of round Jar/ Bottles (change parts included)  Jar enters, signals PEC starwheel turns 90⁰ under capping head  Capping lowers on cam, retracts on cam  Jar/ bottle clamp activated of adjustable cam onto 5/2 valve  Starwheel turns 90⁰ onto exit conveyor  Current capping head removable, for 40mm cap (no alternative head)  All systems work on cams and relays, no PLC  Motor runs on DOL for capping (clutch adjusted and variable speed gearbox)  Cam motor uses inverter. Guards with interlocked access doorway Required services.  3 Phase 32-amp electrical supply  7 Bar air pressure Main control panel Cap sorter and feederRNASRC-N 400-2LSerial no 00801Brief FDS  40mm cap sorter and feeder  Vibrating bowl agitates caps upwards  Air jets and cut outs sort caps placing in correct orientation Bodpeywuczjfx Alcolh  Cap chute allows smooth passage to dispensing head with some adjustment  Cap dispenser works on bottle/jar passing under and catching cap, this allows the retaining jaws to open and release cap  Side or over independent speed controlled wheel assists in cap leveling Required services.  240V electrical supply  3 Bar air pressure Filling volume: 25-2000 ml Controls: SIEMENS S7 via Mitsubishi H...

Condition: ready for operation (used), Diameter range: 52 mm – 65 mm Height range: Production capacity: up to 3000 c.p.h. No. of heads: 18 Blsdoyv An Ajpfx Alcoh Tooling for approx. 52 mm (202) Filler and seamer available separately or together

Condition: used, Year of construction: 2010, Manufacturer : Serac Model : DMX R6V3/720 Year : 2010 Type: Monoblock filling and screwing   Current application: 250 mL bottle/vial - Ø38 mm screw cap Output: 3,300 bottles/hour Dosing: by weight Suction conveyor feed system ensuring bottle stability Heraeus UV tunnel: decontamination Feeding of caps via hopper and bucket conveyor and distributor Decontamination of bottle caps using Claranor pulsed light   Filling: 100L capacity hopper 6 nozzles on scales connected to the ejection of bottles at the machine outlet   Bedpfx Ajyr Sxnolcolh Screwing: Tightening of caps using pneumatic jaws Adjustable clamping pressure

Condition: used, Year of construction: 2010, This Filling machine has been running supporting a large supermarket Chain for the Greek Yoghurt Type cups from 500 gr to 1000 gr yoghurt. The machine has been maintained very well and will be available for dismantling October 2025 . It can be seen running in production. This consists of cup de nester, cup peroxide, filling, UV on film, Film sealing on roll off , Over lid Cap applicator . Capacity: 2000 cps/hr Filling Type: Piston Filler Bjdpfxsyr Nlfo Alcjlh Filling Volumes : 500-1000 gr Controls: Siemens HMI Cup disinfection: Peroxide Film Disinfection: UV Cup Diameter: 120 mm Film application: Heat sealing and cutting off roll Over cap: Plastic lid after sealing

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, total width: 1,321 mm, total length: 1,067 mm, total height: 2,692 mm, input voltage: 240 V, input frequency: 60 Hz, Equipment: documentation/manual, Model NRK-400 In-Line Screw Capping Machine complete with conveyor and guide rails, gripper chains and gripper blocks, four pairs of quills (cap tightening discs), Cap H-26 Hopper/Sorter, cap delivery and application system for 99.8% efficiency. Bodjyrkdpjpfx Alcslh This system can handle both Lug and Screw caps up to 350 caps per minute, depending on product size and condition. The machine can be equipped with steam heating of caps as well as Steam or Gas injection. Compatible with caps ranging from 10-70mm. Include touchscreen controls, power height adjustment, pneumatic "on-the-fly" adjustable clutches, power height adjustable gripper belts, electronically controlled safety switches, Allen-Bradley controls, locking safety interlock switches, container spacing unit, LED safety stack lights, lock out tag out systems.

Condition: used, Year of construction: 1999, Cone Ice Cream Filler — Machine Description This industrial Cone Ice Cream Filler is a purpose-built, high-efficiency production machine engineered for automatic filling of pre-formed ice cream cones. Designed for use in commercial frozen dessert facilities, the system delivers precise, hygienic portioning and consistent presentation, even with soft-serve, artisan, or premium ice cream products. Constructed with robust, food-grade stainless steel and sanitary components, the machine supports continuous high-speed operation while ensuring optimal product handling. The precision dosing mechanism gently fills each cone to the exact weight or volume specification, minimizing giveaway and reducing waste. Featuring a smooth indexing conveyor and adjustable fill heads, this filler is ideal for both medium and large-scale production lines. Its design integrates easily into existing workflows and can be paired with complementary packaging equipment such as automated cone stackers, cooling tunnels, or wrappers. Bledpfjynr Dvsx Alcoh Key Features - Automatic cone handling — accepts cones from feeding system and indexes them into fill position - Accurate, low-shear dosing — fills each cone consistently while preserving ice cream texture - Adjustable fill depth & speed — easily adapts to different cone sizes and product types - Food-grade stainless construction — designed for hygiene, cleanability, and long service life - Modular integration — compatible with upstream and downstream automation - User-friendly controls — intuitive interface for quick changeovers and production adjustment This cone ice cream filler is ideal for manufacturers seeking reliable performance, high throughput, and consistent portion accuracy in commercial production of cone-style frozen desserts. Outlet Capacity : 4000 pcs per hour Filling: Main filler Granular: Available Sirup Filler: Available Paper top applicator: Available Drop off conveyor: Available Condition: Good Available: Immediately

Condition: used, Year of construction: 2004, The Tortica Ice Group Family Tub Ice Cream Filler is a high-performance, purpose-built packaging solution engineered for efficient filling of family-size ice cream tubs and multi-serving containers. Designed for artisan creameries and industrial ice cream manufacturers alike, this machine combines precision dosing with gentle product handling to preserve texture and reduce waste. Built with robust stainless-steel construction and hygienic food-grade components, the Tortica filler ensures consistent portion control and maximum uptime. Its intuitive controls and flexible filling range make it ideal for a wide variety of frozen desserts — including ice cream, gelato, sorbet, frozen yogurt, and premium specialty blends. Key Features: - Accurate volumetric or servo dosing for consistent product weight and minimal giveaway - Adjustable fill heights and speeds to accommodate tubs from small family sizes to larger multi-serve formats - Hygienic design with easy-clean sanitary surfaces, CIP compatible components, and sealed guarding - User-friendly interface for quick changeovers and reduced operator training time - Heavy-duty construction suited for continuous production environments - Smooth, low-shear filling preserves ice cream structure and reduces air entrainment - Optional integrations for lid placement, sealing, date coding, and packing conveyors Whether you’re scaling up production or upgrading your existing line, the Tortica Ice Group Family Tub Filler delivers dependable performance, precise filling accuracy, and the flexibility to support product innovation and seasonal variety offerings. Cup size: 200 x 100 mm (LxW) Granular application: Available Main filling: Available Cap Closing: Available Stations: Cup Dispenser > Filler > Granular Filler > Lid Closing > Outlet Conveyor Condition: Good Bedpfeynr Axex Alcjlh Available: Immediately

Condition: used, Year of construction: 2006, This is an in-line Tub Filler for yoghurts and desserts for catering purposes. The filling volumes are 1-5 kg per tub. This machine was used for a high end customer with the ability of meeting all quality and health and safety standards. Capacity : 5000 kg per hour Sealing: Film roll with sealing and cutting device as well as roll to manage the excess material Blodpfxsynrzbs Alcsh Stations: Tub dispenser > Filling > Sealing > Lid applicator > Date printing > outlet conveyor Protection: Fully enclosed cabin Condition: Good Available: Immediately

Condition: like new (used), HEMA monoblock filler with ZALKIN capper for PET bottles. This type of machine is suitable for dosing the following products: mustard, baby food, sauces, pastes, jams, etc., whether containing particulates or not. These machines are equipped with filling devices specifically designed for dosing viscous products. The HEMA filler operates in two key phases: suction and filling. These phases alternate continuously to ensure fast and accurate filling. The ZALKIN capping machine is engineered for placing and sealing aluminum screw caps—deformable or non-deformable (for carbonated or non-carbonated beverages)—as well as screwing aluminum or plastic caps, or applying snap-on or floating closures. The system is compatible with bottles made of glass, plastic, or metal, in various shapes. Output varies according to product type, container format, and fill volume, with a maximum output of up to 6,000 bottles per hour (120 bottles/min). Includes: - Cap feeder - Infeed conveyors - Discharge belts Bjdpsynkdzofx Alcelh - Control panel - Automatic CIP cleaning system - Cylindrical filling valves - Heated-jacket pistons - Adjustable volume control for container size and filling capacity - Steam sweeping in the capper with vacuum closure - Schneider automatic touchscreen interface - Elevating bottle carrier

Condition: like new (used), COMPRESSED AIR PRESSURE: 8 BAR COMPRESSED AIR CONSUMPTION: 100 NL/MIN Blodeyni Hzopfx Alceh STEAM SATURATED DRY PRESSURE: 4 BAR STEAM CONSUMPTION: 40 KG/H WATER CONSUMPTION: 0.9 L/H. PRODUCTION OF 200 KG BAGS: 60 BAGS/HOUR. PRODUCTION OF 5-20 KG BAGS: 160 BAGS/HOUR CONTROL PANEL PROTECTION DEGREE: IP55 VOLTAGE: 220/380 V READY FOR FILLING 250L AND 1,000L DRUMS. - Production capacity depends on the format and product to be filled. Packaging: Pre-sterilized flexible bags in pre-palletized drums - Up to 160 bags/hour (5 lt – 20 lt) - Up to 60 bags/hour (200 lt) - Up to 15 bags/hour (1,000 lt) Machine complete with roller conveyor for pallet infeed. Excellent condition.

Condition: used, Pamasol Autoguard Gas Filler and Crimper Bsdpfx Aeymyqzolcslh Type: 2005/20 Unit comes with Pamasol 2008/12 Propellant Pump 500 to 700 per hour Device is in excellent condition, very little use.