Mav-Hamburg

Condition: ready for operation (used), Year of construction: 2018, Immediately available from university: As-new L & Z lathe Knuth, Type Basic 180 Super, year 2018. Centre height 180 mm, swing over bed 360 mm, swing over cross slide 220 mm, turning length 1000 mm, spindle bore 38 mm, spindle speeds 45 – 1800 rpm, tailstock MK 4, 2-axis digital readout, chuck, tool holder, steady rest, tailstock, drive 3.5 kW, weight 1 t. Priced at €3,000 plus VAT ex location. Hnjdpsykytqsfx Afnoh

Condition: good (used), Machine number: 8025 Type / Model: DZFG 200 x 500 Control: conventional Centre distance: 500 mm Spindle bore: 32 mm Centre height: 160 mm Swing diameter over bed: over cross slide: 315 mm 200 mm Speed range: 56 to 2,800 rpm Feed long: face: 0.02 to 0.8 mm/rev 0.01 to 0.4 mm/rev Hnjdpfxsykt Dvs Afnjh Connection: 5.5 kW Accessories / Equipment: Condition: good Weight: 1.9 t Dimensions: 2,100 x 1,100 x 1,400 mm

Condition: used, Year of construction: 2018, functionality: fully functional, OPTIturn TH 4010D Lathe Precision, geared lathe with digital position display, center height/distance 205 mm / 1000 mm, motor power 2.4 kW, 400 V, spindle speed 45-1800 rpm, spindle bore Ø 52 mm, spindle foot brake, with automatic longitudinal and cross feeds, CAMLOCK chuck mount, universally applicable workshop machine. Includes machine base with chip drawer, LED work light, coolant system, etc. Fully equipped engine lathes. Hardened and ground bed guideways Spindle mount: Camlock DIN ISO 702-2 No. 5 Guaranteed spindle nose runout accuracy better than 0.015 mm Gears and shafts hardened and ground, running in oil bath on precision bearings Motor circuit breaker DC 24 Volt electrics Lockable main switch Spindle direction (right/left) switchable at bed carriage Removable chip tray with guide rails Safety handwheels with disengage function on X and Z axes Emergency stop pedal Machine base with tool compartment on the right side. Digital Position Display DPA 21 User-friendly membrane keypad, splash-proof, sealed and glare-free Increased working accuracy Reduced error rate thanks to clear layout X, Y/Z0, Z axes with separate 8-digit displays Supplied sensor for spindle speed detection Glass scales on all three axes Connection voltage: 400 V Drive power: 2.4 kW Protection: 16 A Spindle taper: MT 6 Spindle mount: Camlock No. 5 Spindle bore: 52 mm Center height: 205 mm Center distance: 1000 mm Swing over bed: Ø 410 mm Swing over cross slide: Ø 270 mm Swing without gap bridge: Ø 540 mm Turning length in bed gap: 165 mm Bed width: 206 mm Spindle speed: 45 – 1800 rpm Number of gear steps: 16 Top slide travel: 100 mm Cross slide travel: 195 mm Longitudinal feed: 0.043 – 0.653 mm/rev Number of longitudinal feeds: 48 Cross feed: 0.015 – 0.206 mm/rev Number of cross feeds: 48 Metric thread pitches: 0.4 – 7 mm/rev Number of metric thread pitches: 42 Imperial thread pitches: 70 – 4 tpi Hnodpfx Aeykngrofnoh Number of imperial thread pitches: 42 Maximum tool shank height: 16 x 16 mm Tailstock taper: MT 3 Tailstock quill stroke: 130 mm Quill diameter: Ø 45 mm Dimensions (L x W x H): 1920 x 740 x 1555 mm Weight: 750 kg

Condition: good (used), WEILER COMMODOR L&Z Lathe from German Army (Bundeswehr) stock - Good, fully operational condition - Turning diameter: 180 mm - Turning length: 1000 mm - Bar passage: 56 mm - Speed range: 25 - 2000 rpm - Threads: Metric / Inch etc. - Automatic longitudinal & cross feeds - Tailstock MT 4 - 3-jaw chuck 250 mm - Electric chuck guard - Multifix base holder & inserts - Coolant system - Chip guard rear wall - Machine documentation Dimensions (LxWxH): 2.5 x 1.3 x 1.7 meters / Weight: 1500 kg Subject to errors and omissions Hjdpfeykknfex Afnonh

Condition: good (used), Centre height: 180 mm Centre distance: 1000 mm Swing diameter over bed: 360 mm Swing diameter over cross slide: 205 mm Swing diameter in gap: 560 mm Spindle bore: 51 mm Bed width: 290 mm Speed range: 46 - 1750 rpm Feeds & threads: yes Quill stroke: 170 mm Quill diameter: 52 mm Tailstock taper: MT 4 Drive power: 3 kW Dimensions (L x W x H): 1850 x 900 x 1380 mm Weight: approx. 1,400 kg Accessories / Special Features: • 3-axis digital readout, HEIDENHAIN Hsdpjykkbrefx Afnenh • 3-jaw scroll chuck, Ø 200 mm • Gap bed • Steady rest • 4-position quick-change toolpost • Bed stop • Coolant system • Hinged chuck guard • Lighting The machine comes from a training workshop and is in a very well-maintained condition. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2011, centre height 190 mm centre distance 1200 mm turning diameter over bed 370 mm turning diameter over slide rest 230 mm turning dia. in gap 475 mm spindle bore 59 mm spindle turning speed range 35-2000 U/min total power requirement 5,5 kW weight of the machine ca. 1,6 t dimensions of the machine ca. LBH 2,5 x1,0x1,4 m Very well-maintained machine Includes FAGOR digital readout Includes rapid traverse via joystick Hnedpfx Aeyi Hvisfneh Includes central lubrication Includes Multifix tool system with 3 cassettes Includes chuck with additional jaws Includes center point Includes documentation

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 1324, spindle bore: 42 mm, total length: 2,000 mm, total width: 1,000 mm, total height: 1,800 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,500 kg, WEILER CONDOR B Lead and Feed Screw Lathe - Operating voltage: 380 V - Control voltage: 220 V - Connection: 3 kW - Rated current: 25 A - Frequency: 50 Hz - Centre distance: approx. 700 mm - Centre height over bed: 170 mm - Swing over bed: 340 mm - Centre height over cross slide: 100 mm - Swing over cross slide: 200 mm Hnjdpfx Afjyiztionsh The machine is equipped with a tailstock, a Multifix tool holder, type B, as well as a 3-jaw chuck by RÖHM, diameter: 150 mm. Additionally, it features a digital readout by ELESTA, model: VISULESTA 4, including a matching workshop drawer cabinet with suitable accessories for the machine. FCA D-73235 Weilheim Teck – loaded onto truck

Condition: used, Lead screw/Feed shaft lathe US 400 Turning length: 1000 mm Centre height: 200 mm Spindle speeds: 31 – 2000 rpm 3-jaw chuck (⌀ 200 mm) Spindle bore: 45 mm Motor with brake Emergency stop switch Hedpfxsyiy Swo Afnenh Chuck guard without microswitch Including cabinet and contents

Condition: new, Year of construction: 2026, 0330 mm Hnjdpfx Afoyh Rn Rjnsh 210 mm 0635 mm 167 mm 40 mm 2,2 kW spindle turning speed - stepless 30-3000 U/min

Condition: like new (used), L&Z Lathe WEILER COMMODOR B incl. new three-axis digital readout - Machine in absolutely original condition / original paint / guides as new - Machine comes from a research laboratory - GS-marked - Three-axis digital readout "NEW" - Electric chuck guard "NEW" - Centre height 180 mm - Distance between centres 1000 mm Hnsdpfjyhndljx Afneh - Spindle bore 56 mm - Spindle speeds 25 - 2000 rpm - Automatic longitudinal / cross feed - Thread cutting / metric / imperial / module / diametral pitch - 2x emergency stop - Multifix toolpost with inserts - Four-jaw chuck - Röhm - Chip guard rear panel - Machine feet - Coolant system - Documentation Dimensions: LxWxH 2.3x1.2x1.7 meters / Weight 1600 kg Subject to errors and input mistakes

Condition: good (used), Subject to differential taxation according to §25a of the VAT Act. You will receive a proper invoice, however, VAT will not be shown separately. Internal item no.: 26010 You are welcome to inspect the machine under power in our heated warehouse of over 500 m². Leadscrew and feedshaft lathe Voest Alpine DA180 + Coolant system + Röhm 200 four-jaw chuck + Chuck guard (with switch) + Multifix "B" Motor: 380 Volt / 5.5 kW Speed: 44 - 2,000 rpm Hsdpfxeyg Dtgj Afnenh Swing over bed: 380 mm Swing over cross slide: 185 mm Turning length: 1,000 mm Centre height: 180 mm Bed width: 330 mm Spindle bore: 52 mm Tailstock taper: MK 4 Dimensions (LxWxH): 220 x 120 x 160 cm Weight: approx. 1,200 kg The machine comes from an educational institution and is in well-maintained condition.

Condition: good (used), Year of construction: 1983, Margin scheme taxed according to §25a German VAT Act. You will receive a proper invoice; however, VAT will not be shown separately. Internal article no.: 26012 You are welcome to inspect the machine under power on over 500m² of heated storage area. Leadscrew and feed shaft lathe Voest Alpine DA180 Max. swing over bed: 380mm Distance between centers: 800mm Spindle bore: 52mm Tailstock: MT4 Multifix "B" basic holder Chuck guard (with switch) Röhm 3-jaw chuck 200mm Dimensions (LxWxH): 250 x 140 x 140cm Hnsdpfx Afsyg Dl Ajneh Weight: approx. 1200kg The machine comes from a training facility and is in well-maintained condition.

Condition: good (used), L&Z spindle lathe WEILER COMMODOR B from educational institution -GS identification -3-axis digital readout "NEW" -Centre height: 180 mm -Centre distance: 1000 mm -Spindle bore: 56 mm -Spindle speeds: 15 - 2000 rpm -Automatic longitudinal & cross feeds -Thread cutting: metric / imperial / module / diametral pitch Hjdpfx Asyf U E Dsfnenh -Electric chuck guard -2 x emergency stop -Multifix with insert -Four-jaw chuck - Röhm -Chip guard rear panel -Coolant system -Very well-maintained original condition -Documentation Dimensions: LxWxH 2.3x1.2x1.7 m / Weight 1600 kg Errors and omissions excepted

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Weiler Praktikant VC Plus Precision Lead and Feed Screw Lathe with 3-Axis Digital Readout, Infinitely Variable Speed, Excellent Condition Technical Data: >> Year of manufacture: 2014, Machine no. JD12 >> Centre height: 160 mm >> Swing over bed: 320 mm >> Swing over cross slide: 190 mm >> Distance between centres: 650 mm Hedpfjydczdsx Afnenh >> Spindle speeds: 30 – 4000 rpm (infinitely variable) >> Spindle bore: 43 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Infinitely variable feed adjustment during operation via potentiometer (override) >> Input of feed rates and thread pitches >> Longitudinal feeds from 0.1 to 6 mm/rev >> Cross feeds from 0.003 to 2 mm/rev >> Thread cutting possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.1 to 20 mm >> Weight approx. 1,400 kg >> Spindle brake >> Dimensions: approx. 1.72 m (L), 1.7 m (H), 0.89 m (D) Accessories and Features: >> Weiler digital readout >> Collet chuck (new), collet set NEW from 3 to 26 mm >> 160 mm 3-jaw chuck with 1 set of jaws >> 160 mm 4-jaw chuck with 2 sets of jaws >> Multifix size B quick change toolpost with 3 tool holders >> 1 bed stop >> Splash guard >> Coolant system >> Machine lamp >> Operating manual, spare parts diagram Safety Features: >> Lockable main switch >> Emergency stop button >> Electrically monitored chuck guard >> Automatic disengagement of the respective handwheel when feed is engaged VCplus Digital Readout: >> 8 inch color display >> 3 axes for bed, cross, and compound slides >> 99-tool memory >> Spindle orientation stop >> Input of either constant speed or cutting speed >> Feed and threading settings are displayed >> Thread cutting with electronic stop About the machine: Offered here is a Weiler Praktikant VC Plus precision lead and feed screw lathe with 3-axis digital readout. Year of manufacture 2014, in very good condition with original paint. The machine is, of course, fully functional and equipped with new collets and chucks. Take the opportunity to inspect the machine under power at our premises and see its condition for yourself.

Condition: used, Year of construction: 1975, turning diameter over bed 380 mm turning diameter over slide rest 215 mm turning length 1250 mm spindle bore 41 mm bed width 340 mm number of spindle speeds 12 Hnedpfoycxf Aex Afneh spindle turning speed range 14-2800 U/min total power requirement 6 kW weight of the machine ca. 1,85 t dimensions of the machine ca. 3 x 1 x 1,35 m Special price sale directly from the factory! Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 91-160-2498, Used WEILER PRAKTIKANT 160 lead and feed screw lathe Centre height: 160 mm Centre distance: 650 mm Spindle speeds approx. 48–2,500 rpm Spindle bore: 40.5 mm Hnedpfxsyciw Ao Afnjh Leadscrew and feed shaft are covered. Scope of delivery: Including 3-axis digital readout from Heidenhain, chip guard back wall, lever collet system (without collets), 1 x faceplate Ø 250 mm, electrically interlocked chuck guard, machine lamp, Multifix size A quick-change toolpost with 4 holders, bed stop, cooling unit, and fixed steady rest. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: LVM50GIRJA/02115, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle Bore 42mm Spindle motor 7.5Kw Width over bedways 318mm Travel cross slide 250mm Travel top slide 100mm Travel tailstock barrel 145mm Taper in tailstock barrel No. 4MT Machine in Imperial execution MACHINE EQUIPPED WITH Newall DP700 2 axis DRO system 3 jaw chuck Hjdpfx Afjycg Thonsnh Quick change toolpost and 3 toolholders Bedstop Lighting Chuck guard Coolant system Rear splashguard

Condition: good (used), Please read the technical specifications carefully. If the machine is suitable for your investment, we kindly request a complete verification of your identity, including a correct telephone number and email address, prior to submitting an offer. Lead and feed screw lathe Colchester Triumph 2000 Hnjdpfsyb A Uxjx Afneh Turning length: 750 mm Swing over bed: 390 mm Swing over cross slide: 240 mm Largest swing in the gap: 580 mm Gap length in front of faceplate: 155 mm Spindle bore: Ø 54 mm Spindle mount: 6" D1 Camlock Tailstock: MT4 Quill stroke: 155 mm 16 spindle speeds from 25 to 2000 rpm 39 metric thread pitches from 0.2–14 mm 45 Whitworth thread pitches from 2–72 tpi 18 module thread pitches from 0.3–3.5 module 21 diametral pitch threads from 8–44 DP 15 longitudinal feeds from 0.04–1.0 mm/rev 15 cross feeds from 0.02–0.5 mm/rev Dimensions (LxWxH): 2000 x 980 x 1640 mm Weight: 1350 kg The machine and bed are in good condition and run perfectly. Cross slide backlash: 0.2 mm Top slide backlash: 0.4 mm Accessories/Equipment: - Chuck guard - Machine lamp - Multifix B toolpost - Bed stop - 3-jaw chuck D250 mm - Machine feet

Condition: good (used), Year of construction: 1999, From a training workshop: GDW LZ 350 Year of manufacture: 1999 Distance between centers: 825 mm Spindle bore: 38 mm Swing diameter: 360 mm 3-axis digital readout from Axesta Speed range: 45–2000 rpm Röhm ZS 160 three-jaw chuck Work light Hnodpfx Aoyag Iyefneh Coolant pump 2x emergency stop Accessories: Multifix Machine feet Change gears 2x Multifix Spare jaws for chuck Operating manual + machine card 380 Volt Weight: 950 kg Dimensions (approx. in mm): 1800x900x1650

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 52 mm, turning diameter: 330 mm, turning diameter over bed slide: 160 mm, turning diameter over top slide: 160 mm, center width: 1,000 mm, turning length: 1,000 mm, total length: 1,800 mm, total width: 650 mm, total height: 1,400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 70 rpm, Distance between centres: 1.000 mm Swing: 330 mm over bed / 160 mm over cross slide Spindle bore: 52 mm Spindle speed: 70 - 2.000 rpm Hedpfxjyac Ene Afnenh Featured with: - 1x fixed steady, 1x moving steady - Gearwheels-set - Flat chuck - Chuck protection hatch - Cooling unit Country of origin: The Netherlands Machine LxWxH: 1.800 x 650 x 1.400 mm Machine weight: 750 kg

Condition: used, Year of construction: 1960, centre distance 1200 mm 550 weight of the machine ca. 2,5 t Hnedox U A Igspfx Afnsh

Condition: good (used), Year of construction: 1985, functionality: fully functional, turning diameter over cross slide: 160 mm, spindle bore: 36 mm, turning diameter: 300 mm, center height: 150 mm, center width: 500 mm, total length: 1,500 mm, total width: 800 mm, total height: 1,300 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 15 rpm, overall weight: 1,000 kg, Conventional lathe, center high 150 mm, between centers 500 mm, bore Ø 36 mm, 18 speed 15 - 3550 rpm, motor 3 kw, equipement: collet device, coolant device, 3-jaws chuck, rotating pin, drill chuck, tool post RAPID with 5 toolholders, lamp, dimensions 150x80x130 cm, weight ca. 1000 kgs Hjdpfox Urmlox Afnenh

Condition: new, Year of construction: 2025, functionality: fully functional, center height: 155 mm, total length: 1,632 mm, total width: 770 mm, total height: 540 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, bed width: 190 mm, overall weight: 360 kg, three-jaw chuck diameter: 160 mm, Substructure is not included, but can be added. Hnsdpfsx Tr Rzox Afnsh Delivery Contents: Three-jaw lathe chuck Ø 160 mm, No. 4 Reducing sleeve MK 5 / MK 3 Two non-moving center points MK 3 Quadruple steel holder 25 mm Set of change gears Machine initial filling with quality oil Operating tool

Condition: good (used), Year of construction: 2000, machine/vehicle number: 1101188, GDW LZ 250 lead and feed screw lathe Year of manufacture: 2000 Centre height: 125 mm Centre distance: 500 mm Spindle bore: 38 mm Spindle mount: DIN 55027/4 Tailstock taper: MK 3 Speed range: 60 - 3,000 rpm, stepless Weight: approx. 600 kg Dimensions: approx. 1,300 x 700 x 1,400 mm Hsdpfsx Slhdex Afnsnh With collet chuck mechanism With Iskra digital readout

Condition: like new (used), – Centre distance 1000 mm – Swing over bed 360 mm Hodpfsx N A D Dox Afnsnh – Swing over gap 490 mm – Swing over cross slide 180 mm – Spindle bore 52 mm – 70–2000 rpm – Infinitely variable speed – Digital speed display – Longitudinal and cross feed – Digital readout on two axes – Brake – Coolant system – Lighting – Safety cover – Fixed steady rest – Travelling steady rest – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation – 400V