FTS Frästechnik & Service GmbH

Condition: good (used), Year of construction: 2017, MTRent MT CUT V 110 Y - 12 TH, year of manufacture 2017, Heidenhain iTNC 530 control, travel X/Y/Z 1100/610/610 mm, 30-position tool changer, SK 40 spindle taper, internal high-pressure coolant (IKZ), 3D measuring probe, table size 1250 x 610 mm, spindle speed up to 12,000 rpm, machine weight 7,500 kg. Bedpex A Txiefx Abbjlr

Condition: ready for operation (used), Year of construction: 2001, Immediately available ex location: Vertical Machining Center Sigma Type Zenit 3 Year of manufacture 2001 Heidenhain TNC 426 – M Table 1200 x 500 mm Travel X/Y/Z 1000/500/550 mm SK 40 Tool magazine for 50 tools Spindle speeds up to 12,000 rpm Through-spindle coolant Weight 6.5 tonnes Priced at EUR 7,000,-- plus VAT ex location. Blodpsx A Sfuofx Abbsr

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,200 kg, table width: 1,350 mm, table length: 600 mm, spindle speed (max.): 8,000 rpm, VERTICAL MACHINING CENTER DMG MORI NVX5100/50 YEAR 2015 ERGOline (Mitsubishi M730UM-B) Table: 1350x600 mm Blodpfxox Axdks Abbor Axes travel: X:1050 Y:530 Z:510 mm 8,000 rpm, BT50, ATC30 Chip conveyor Automatic tool length measurement Workpiece setup detection

Condition: ready for operation (used), Year of construction: 2007, operating hours: 34,200 h, General Data Machine weight 7100 kg Control Unit Brand MAZATROL Model MATRIX NEXUS Main Drive Number of axis 4 Movement X-Axis Movement 1050 mm Y-Axis Movement 510 mm Z-Axis Movement 510 mm Table Table load 1200 kg Tools Bjdpjx Aw H Defx Abbelr Number of index 30 This 4-axis Mazak NEXUS VCN 510C-II was manufactured in 2007. It features a Mazatrol Matrix NEXUS CNC control, X-axis travel of 1050 mm, Y-axis travel of 510 mm, Z-axis travel of 510 mm, and a 4th axis KITAGAWA rotary table. The machine has a table size of 1300 × 550 mm and can handle a maximum load of 1200 kg. Consider the opportunity to buy this Mazak NEXUS VCN 510C-II vertical machining centre. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2012, Parts shown by hand not come. Bodpfxsx Awzbs Abbelr 12.000 rpm,25 KW, 160Nm Control unit: HEIDENHAIN iTNC 530, 4th axis will come without parts shown by hand.

Condition: used, Year of construction: 2017, travel -x axis 1.050 mm travel -y axis 530 mm travel -z axis 510 mm control MAZATROL Smooth G number of spindle speeds 40 - 12.000 U/min tool taper SK 40 numbers of positions in the tool changer 30 table-size 1.300 x 550 mm Milling machining centers - vertical | VCN-530C - 2017 Bjdpfx Abex Avr Eebolr The machine is in a well-maintained condition and can be inspected under power at any time in the factory location. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VCN530C | VCN-530 C | VCN 530C | VCN 530 C

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 22 kVA, torque: 102 Nm, controller manufacturer: Milltronics, controller model: CNC 9000, total height: 2,565 mm, total length: 3,722 mm, total width: 3,210 mm, table width: 508 mm, table length: 1,168 mm, table load: 1,710 kg, overall weight: 4,125 kg, spindle speed (max.): 10,000 rpm, distance table center to spindle nose: 610 mm, spindle motor power: 15,000 W, spindle nose: Big Plus ISO 40, number of spindles: 1, number of slots in tool magazine: 20, tool length: 240 mm, tool diameter: 80 mm, tool weight: 7,000 g, input voltage: 230 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, => Price of the machine within Germany. Blodpjx Akgwofx Abbjr => Machine available from stock. Transport from the warehouse in the Netherlands or Czech Republic by the buyer. Other machine sizes available including screw chip conveyor and all software options such as • Milltronics 9000-DGI CNC incl. all options for desktop, programming, milling strategies • 15" color LCD touch screen monitor • 120 GB solid state hard drive • 4 GB RAM memory • Two USB ports • Productivity software ChipBoss, DSA, MSV, 9000-DGI Desktop optional accessories: IKZ cooling through the spindle 20 bar, with rotary union and additional tank with filter Programmable air cooling through the spindle IKZ preparation for Milltronics IKZ system allows easy on-site installation of the Milltronics IKZ system IKZ preparation for ChipBlaster® IKZ system allows easy on-site installation of the ChipBlaster® IKZ system Programmable minimum quantity lubrication Programmable air cooling LCM 4th axis model TDE-MV-200 complete with controller and motors LCM 4th Axis Model TDE-MV-250 complete with controller and motors 5AX LCM-BSC-200 complete with controller, motors and cables 4th Axis Electrical Package with 1kW servo controller Milltronics M-170 (170mm) rotary table with servo motor and cable (Requires 4th Axis Electrical Package) Milltronics M-200 (200mm) rotary table with servo motor and cable (Requires 4th Axis Electrical Package) Milltronics M-250 (250mm) rotary table with servo motor and cable (Requires 4th Axis Electrical Package) Milltronics TS-A135 Tailstock For M-170 rotary table Milltronics TS-A160 Tailstock For M-200 rotary table Milltronics TS-B185 Tailstock For M-250 rotary table 180 mm three-jaw chuck with adapter flange (For Milltronics rotary tables only M-170 and M-200) 230 mm three-jaw chuck with adapter flange (only for Milltronics rotary tables M-250) Tsudakoma 4th axis model RNE-160R with motor (4th axis electrical package must be ordered separately) Tailstock for Tsudakoma RNE-160R Tsudakoma 4th axis model RNE-200R with motor (4th axis electrical package must be ordered separately) Tailstock for Tsudakoma RNE-200R Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros OTS tool measuring probe with optical signal transmission and macros Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros Renishaw OMI-2T included OTS tool measuring probe with optical signal transmission and macros Renishaw NC4-F300 contactless tool measurement DIN / CAT tool holders Hinged belt chip conveyor External keyboard uses 1 USB port Electronic spindle cooler Additional work light Additional "M" functions block of 4 Programming manual in paper format Machine manual in paper format

Condition: good (used), Year of construction: 2007, 1 x tool grinding machine Spinner SM 100 Year of manufacture: 2007 with integrated coolant system very nice machine from a medical technology operation. Accessories: 20 x draw-in collets Schaublin W 25 1 - 20 mm (Photos to follow) Bljdsx Ai Nkopfx Abbsr The machine can be inspected under power.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Controller SIEMENS828D Table size 1050 x 700 mm Max. table load 800 kgs X travel 1020 mm Y travel 700 mm Z travel 500mm Spindle speed 20000 rpm Rapid speed X/Y/Z 32/32/32 m/min Feedrate range 1 - 20000 mm/min Tool holder type HSK-A63 ATC magazin 16-fold Weight 9000 kgs Bedpox Aif Ejfx Abbslr Accessories, features - Chip conveyor - Spindle cooler - Digital oil cooler - CTS 20 Bar - Oil separator - MPG - 3 axis driving with motor encoder - Measuring rod on 3 axis There are two machines for sale. They are still in production and work OK. Under power in Hungary.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1056789, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 18 m/min, workpiece weight (max.): 1,500 kg, total height: 3,600 mm, total length: 2,400 mm, total width: 2,600 mm, table width: 457 mm, table length: 1,219 mm, table load: 1,500 kg, overall weight: 7,000 kg, spindle speed (max.): 10,000 rpm, coolant supply: 20 bar, number of slots in tool magazine: 24, type of input current: three-phase, coolant supply through spindle: 20 bar, tool type: SK 40, Equipment: chip conveyor, documentation/manual, lighting, This CNC machine is a Haas VF3(BHE) from 2007. It features a side-mount tool changer and a double-arm gripper, enabling automatic tool changes from 24+1 tools. Both the tool changer and spindle accept SK40 tool holders. A wired handwheel is located on the left side of the control panel. The 4th axis is pre-configured. The front and side safety viewing windows have been replaced. The coolant has been drained, and the tank has been cleaned. An additional 25-micron coolant filter protects the spindle's internal coolant system via the tool against contaminants and chips. Training materials and a manual are included, as well as a cable for communication with a computer (see photos). The machine is powered on and can be inspected and demonstrated by appointment at any time. Bledpox Aidhjfx Abbsr We are happy to answer any further questions you may have about the CNC machine. Organizing transport at the buyer’s expense is possible by arrangement. Sale on behalf of a customer!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 1,010 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 520 mm, controller model: Fanuc OiMD, spindle speed (min.): 8,000 rpm, High pressure CTS 20 bar Auger Bedexz R Ifspfx Abbslr

Condition: good (used), Year of construction: 2010, Traverses XYZ: 1020 x 540 x 510mm, table size 1200 x 540mm, ISO40 spindle taper, spindle speed 12000 rpm, FANUC i Control, spindle motor power 15kW, Bsdpsxzt Hwofx Abbslr 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor, with 4th axis.

Condition: good (used), Year of construction: 2010, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 530 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: 18i-MB, workpiece weight (max.): 1,000 kg, table width: 600 mm, table height: 900 mm, table length: 1,200 mm, spindle speed (max.): 8,000 rpm, spindle nose: BT40, number of slots in tool magazine: 24, Equipment: chip conveyor, Tongtai (Topper) TMV-1100A – Vertical Machining Center Year of manufacture: 2010 Control: FANUC Series 18i-MB Equipment: incl. 4th axis / rotary table Bledpfx Aoxzr Tiobber Technical Data Travel distances: X-axis: 1,100 mm Y-axis: 600 mm Z-axis: 530 mm Table: Table size: 1,200 × 600 mm T-slots: 5 slots Max. table load: 800–1,000 kg Spindle: Spindle taper: BT-40 Max. speed: 8,000 rpm Spindle motor: approx. 9 / 7.5 kW Feeds: Rapid traverse X/Y/Z: 30 / 30 / 24 m/min Cutting feed rate: 1 – 10,000 mm/min Tool changer: 24-station magazine Max. tool diameter: 89 mm / 125 mm (with / without adjacent slot) Max. tool weight: approx. 7 kg Machine overall: Machine weight: approx. 7,500 – 7,700 kg Machine height: approx. 2,920 mm Machine length: approx. 2,800 mm Machine width: approx. 2,800 mm Equipment / Options: FANUC 18i-MB control Full enclosure Coolant system Chip conveyor 4th axis / CNC rotary table

Condition: ready for operation (used), Year of construction: 2010, Control Unit Brand HEIDENHAIN Model TNC 530 Main Drive Number of axis 3 Spindle Speed 10000 RPM Tool taper ISO 40 Movement X-Axis Movement 1016 mm Z-Axis Movement 710 mm Y-Axis Movement 610 mm Bodpoxzlumsfx Abbelr Table Table load 700 kg This 3-axis MAS MCV 1016 QUICK was manufactured in 2010. It features a table size of 1300 × 600 mm, with a maximum travel of 1016 mm in the X-axis, 610 mm in the Y-axis, and 710 mm in the Z-axis. The spindle supports a speed range of 20–10000 rpm with stepless speed change. It can handle a maximum table load of 700 kg. If you are looking to get high-quality milling capabilities consider the MAS MCV 1016 QUICK machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 7000 kg Control Unit Brand FANUC Model 0i-MD Movement X-Axis Movement 1020 mm Z-Axis Movement 550 mm Y-Axis Movement 610 mm Main Drive Spindle Speed 8000 RPM Spindle motor power 15 kW Tool taper ISO 40 Number of axis 4 Table Table load 600 kg Table Width 1200 mm Table Length 600 mm Tools Slots in storage 24 Max weight 7 kg Blsdpfx Absxzlvkebsr Media Internal cooling yes This Dugard 1000Y Plus was manufactured in 2011. It features a table size of 1200 × 600 mm, a maximum table load of 600 kg, and a tool magazine capacity of 24 tools. The machine includes a fourth rotary axis and is equipped with a FANUC 0i-MD control. If you are looking to get high quality milling capabilities consider the Dugard 1000Y Plus machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, x-travel 1050 mm y-travel 600 mm z-travel 600 mm weight of the machine ca. 7200 kg Bodpfjxzk Nvox Abbslr

Condition: excellent (used), Year of construction: 2011, operating hours: 18,800 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 630 mm, controller manufacturer: Heidenhain, controller model: Heidenhain iTNC 530, table width: 1,150 mm, table length: 560 mm, table load: 700 kg, overall weight: 7,800 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 3,600 h, number of slots in tool magazine: 30, tool length: 250 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, POSmill C 1050 Vertical Machining Center, year of manufacture 2011, including Lehmann TF Vario X 510.520 4th/5th axis (see right) (without LANG clamp) Equipped with M&H probing system / tool measurement with 1x POSfix 100mm vise (see left) with 1x quadruple clamping system (see center) Blodpfx Ajxzhfnobbjr Magazine with 30 tool positions, SK40 tool holder. Internal coolant supply, through-spindle air, chip conveyor, etc.... The machine is in very good condition, with very low hours (3600 spindle hours) and, in comparison, even fewer hours on the Lehmann 4th/5th axis. Viewing under power is welcome by prior arrangement, (almost) anytime. Single-operator use (the machine was exclusively operated by myself). The reason for sale is a private accident about two years ago. For further questions and for optional accessories regarding the machine or Lehmann 4th/5th axis, I am gladly at your disposal. Note: The LANG clamp and the tools in the magazine visible in the pictures are NOT included in the sale price and are shown for demonstration purposes only!

Condition: good (used), Year of construction: 2017, Machine has 2,500 spindle hours Hurco VM 30 i, Year of manufacture: 2017, Control: Winmax 5, Travel X/Y/Z 1100/510/510 mm, Tool changer with 20 stations, Taper SK 40, Spindle speed up to 10,000 rpm, DXF interface, High-pressure cooling IKZ 15 bar, Bodpoxzch Djfx Abbslr Chip conveyor, Vacuum clamping system as new – 1 month old,

Condition: ready for operation (used), Year of construction: 2012, Immediately available ex toolmaking shop in Switzerland: Vertical 5-axis simultaneous machining center Unitech Model HSM – IC 5 Axis Year of manufacture: 2012 Heidenhain iTNC 530 Table: 1100 x 600 mm Travel (X/Y/Z): 1080/610/810 mm Rotary table diameter: 600 mm Spindle speeds up to 15,000 rpm Feeds up to 30,000 mm/min Table load: 500 kg Bljdpfx Abexy N U Ujber Tool holder: BT 40 Magazine: 40 tools Through-spindle coolant (IKZ) 60 bar Chip conveyor Compressed air through spindle Spindle hours: 8,200 / Spindle will be completely overhauled in 2025 – hours reset to 0 Glass scales on X and Y axes Zero-point measurement system in rotary table Infrared measuring system Zero-point clamping system in rotary table with 10 clamping pots by Schunk Weight: 10 tons Offered at €19,500 plus VAT ex works

Condition: ready for operation (used), Year of construction: 1999, Main Drive Number of axis 3 Spindle Speed 10000 RPM Bljdpfx Aexy Armebbor Movement X-Axis Movement 1050 mm Z-Axis Movement 460 mm Y-Axis Movement 560 mm Tools Type of tool holder BT50 This 3-axis Okuma MX-55VB was manufactured in 1999. It features BT50 tool holders and a tool measuring system. The machine has an X-axis travel of 1050 mm, Y-axis of 560 mm, and Z-axis of 460 mm. Complete documentation is available. If you are looking to get high-quality milling capabilities, consider the Okuma MX-55VB machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Manufacturer: Haas Model: VM-6HE Serial number (SN): 1067464 Axes: 3-axis CNC machining center Bsdpsxywiyofx Abbelr Spindle mount: SK40 Axis travels (X/Y/Z): 1,625 × 812 × 764 mm Table: clamping table Equipment: • Chip conveyor • Automatic tool changer (ATC) • Tool magazine: 24 positions

Condition: excellent (used), Manufacturer: Haas Serial number: 1059169 Spindle taper: SK40 Axis travels (X/Y/Z): 1,016 × 660 × 635 mm Additional equipment: Bedpfx Absxywh Ajbslr chip conveyor clamping table automatic tool changer (ATC) tool magazine: 24 positions

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol Matrix, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,050 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Rapid traverse X-axis: 36 m/min Rapid traverse Y-axis: 36 m/min Rapid traverse Z-axis: 36 m/min Table size: 1,300 x 550 mm Main spindle speed: 12,000 rpm Number of tool stations: 30 Spindle taper: SK 40 MACHINE DETAILS Control: Mazatrol Matrix Motor power: 11 kW Bedpfx Ajxywhvsbbelr EQUIPMENT Through-spindle coolant 5 bar Electronic handwheel Chip conveyor

Condition: ready for operation (used), Year of construction: 2010, operating hours: 14,400 h, functionality: fully functional, machine/vehicle number: A1003212.01, travel distance X-axis: 1,050 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 520 mm, controller model: Siemens 810D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X: 1,050 mm Travel Y: 710 mm Travel Z: 520 mm Tool holder: SK 40 Spindle speed: max. 8,000 rpm Spindle power: 12 kW Tool magazine: 30 stations MACHINE DETAILS Control: Siemens 810D Weight: approx. 5,600 kg Operating hours Spindle hours: 14,400 h Power-on time: 60,521 h EQUIPMENT Fully enclosed working area Blodsxywa Eepfx Abber Work area lighting Central oil mist extraction Hinged belt chip conveyor Internal coolant supply 20 bar Note: The last day for pick-up in 2025 is December 22, 2025. The earliest pick-up date in 2026 is January 12, 2026!

Condition: ready for operation (used), Year of construction: 2001, General Data Machine weight 5000 kg Blsdpfxexyl Rfj Abbsr Movement X-Axis Movement 1016 mm Z-Axis Movement 610 mm Y-Axis Movement 610 mm Main Drive Number of axis 3 Spindle Speed 5000 RPM Spindle motor power 11 kW Tool taper SK 40 Tools Max weight 5.5 kg This 3-axis MILLTRONICS VM24 vertical machining center was manufactured in 2001. It features a table size of 610 x 1140 mm, X/Y/Z travel of 1016/610/610 mm, and a spindle motor with 7.5/11 kW power. The machine supports a maximum workpiece weight of 900 kg and includes a 20-station tool changer. Ideal for detailed machining tasks. Contact us for more information about this machine. Application Types Milling