Biomatyx

Condition: ready for operation (used), PRODUCT INFORMATION Total weight (standard jib, without accessories): 64.5 kg (142 lb) Lifting capacity (SWL): Regular jib: 227 kg (500 lb); Extended jib: 130 kg (287 lb) Battery pack weight: 5.0 kg (11 lb) Turning diameter: 1222 mm (48 in) Minimum door requirement: Standard Base (KMCS…) & Low Height Base (KMCL…): 717 mm (28.25 in); Extra Low Height Base (KMCEL…): 770 mm (30 3/8 in) Operating forces of controls: 2.5–3 N ELECTRICAL Degree of protection: IPx7 (Hand control), IP24 (MAXI MOVE) Internally powered: 24 Vdc Battery type: Rechargeable (Sealed Lead Acid) Battery capacity: 24 Vdc, 4.0 Ah to 5.5 Ah Battery charger input (part #NDA8200): 100 to 240 Vac / 50 to 60 Hz Up and down current limiting: 12 ± 1 Amp Duty cycle: 15% (max. 2 min continuous use) Sound power level (up): 61.9 dBA Sound power level (down): 61.7 dBA Medical equipment classification: Type BF protection (IEC 60601-1 compliant) COMPLIANCE / WARNINGS Compliance: IEC 60601-1-2 (Electromagnetic Compatibility), ISO 10535 (except with stretcher) RF communication warning: Keep portable RF equipment at least 30 cm away from device DIGITAL SCALE SPECIFICATIONS Weight range: 227 kg (500 lb) Display resolution and type: 0.1 kg (0.2 lb), liquid crystal display Accuracy (in service): • 2–50 kg ±50 g / 4–110 lb ±0.1 lb • 50–200 kg ±100 g / 100–440 lb ±0.2 lb • 200–227 kg ±150 g / 440–500 lb ±0.3 lb OPERATION AND STORAGE CONDITIONS Ambient temperature range: Operation: 5° to 40°C (+41° to +104°F); Storage: -25° to 70°C (-13° to +158°F) Relative humidity range: Operation: up to 93% (non-condensing); Storage: up to 93% (non-condensing) Atmospheric pressure range: Operation: 795 hPa to 1060 hPa (2000 m max); Storage: 500 hPa to 1060 hPa Comes with a wall-mounted charger block, and strap. We have 4 pcs in stock with fully functional battery. Good working condition. Fgsdpfxoxvxf Ij Ad Noi Please check out our other listings as well.

Condition: ready for operation (used), A Büchi laboratory spray dryer is available. Evaporation capacity: 1l/h, heating power: 2300W, max. inlet temperature: 220°C, air flow rate: 35m³/h, spray gas flow rate: 200l-800l/h, pressure: 5bar-8bar. Machine dimensions X/Y/Z: approx. 650mm/700mm/1100mm, weight: approx. 50kg. Documentation available. An on-site inspection is possible. Fjdexvrucepfx Ad Njgi

Condition: ready for operation (used), The Systec DX-150 is a front-loading, horizontal benchtop autoclave with a 162-liter chamber, measuring approximately 500 x 1000 mm. It features microprocessor control, automatic water feed, flexible temperature sensors, multiple programs for solids, liquids, and waste, and interfaces for data transmission. The autoclave operates with a maximum temperature of 150 °C and 4 bar pressure and includes safety interlocks for door opening. Key Specifications: Made in 2015 Fodpjxvp Utofx Ad Njgi Chamber Volume: 160 L Chamber Dimensions: Ø 500 mm x 1000 mm Maximum Temperature: 150 °C Maximum Pressure: 4 bar Power: 380 – 400 V, 50/60 Hz, 16 A Good working condition. Please check out out other listings as well.

Condition: used, Fully functional Infors shakers (2 units available). Both machines are equipped with a cooling system, though it is not operational – we did not require it. The machines have been upgraded with advanced control systems, featuring a touch panel with sophisticated automation. Adhesive mats are attached inside both Infors units. Price is per unit. Specifications: Operating temperature range: 10–40°C Fodpfoxvlkqex Ad Njgi Platform motion range: 60–250 rpm Max. program duration: 1000 h Height of a single chamber: 350 mm Platform size (WxL): 840x440 mm Dimensions (WxLxH): 1250x870x1990 mm

Year of construction: 2001, condition: ready for operation (used), Various machines for laboratory use and pilot processes are available. 1) 2x Bioreactor system B. Braun Biotech Biostat 72L/Biostat C-CDU, year of construction: 2001, useful volume: 15l, control: Biostat C-CDU 1137. 2) Forced-air drying cabinet Heraeus (Kendro) UT 20, useful volume: 210l, internal dimensions X/Y/Z: approx. 610mm/510mm/680mm, max. temperature: 250°C, machine dimensions X/Y/Z: approx. 770mm/940mm/800mm. 3) Ultra cryostat Lauda K 75 with a cooling thermostat Lauda RUK 40S, bath volume: approx. 30l, min. temperature: -90°C. 4) Centrifuge CEPA 8L G, year of construction: 1985, speed: 17000rpm, drum diameter: 125mm, max. filling capacity: 10kg, power: 2.2kW. Documentation available. An on-site inspection is possible. Sale of individual units possible. Fgedpexvdfmofx Ad Nei

Condition: like new (used), Thermo Scientific ThermoChill II Recirculating Chiller For sale: Thermo Scientific ThermoChill II recirculating chiller – a professional device designed for precise cooling of laboratory and industrial systems. The unit is in factory-new condition, fully operational and ready for use. Ideal for use in laboratories, research processes, cooling of analytical equipment, lasers, spectrometers, vacuum systems, and cooled process circuits. Technical specifications (ThermoChill II): Cooling capacity: up to 1000 W Temperature range: -10 °C to +30 °C Stability: ±0.1 °C Fsdpfxoxuzt Ss Ad Nogi Reservoir capacity: approx. 9.5 L Pump performance: up to 13.6 L/min Power supply: 115V/230 V / 50 Hz Dimensions: 62 × 36 × 60 cm Built-in manometer and digital control panel Manufacturer: Thermo Fisher Scientific (USA) + CE Inspected and ready for operation

Condition: excellent (used), Hirayama HV-110L Autoclave – 2017 – Excellent Condition – Ready for Operation For sale: Hirayama HV-110L steam autoclave (manufactured in 2017) – fully functional, ready for immediate use. The device comes from a university laboratory, where it was used only occasionally, exclusively for sterilizing laboratory glassware. Regularly serviced – the autoclave is in excellent technical and visual condition. Technical specification: Fgedpfexuztxsx Ad Nei Manufacturer: Hirayama (Japan) + CE Model: HV-110L Year of manufacture: 2017 Chamber capacity: 110 liters Temperature range: up to 135°C Operating pressure: up to 0.26 MPa Power supply: 230 V / 50 Hz Control: microprocessor with digital panel Working modes: automatic sterilization, drying, and cooling programs Safety features: safety valve, lid lock, temperature and pressure sensors Condition and origin: - Used equipment, fully operational. - Pressure and temperature tests performed. - Clean, no corrosion, chamber interior in perfect condition. - Ready for use without the need for additional investment.

Condition: excellent (used), Laboratory Freezer -86°C Thermo Fisher Scientific 88700V61 . Professional ultra-low temperature freezer for long-term storage of biological and laboratory samples within a temperature range from –86°C to –50°C. Model Thermo Fisher 88700V61 — a reliable unit with a capacity of 949 L, ideal for laboratories, research facilities, and biotechnology companies. . Technical data: • Temperature: –86°C • Capacity: 949 L • Power supply: 230 V / 50 Hz • Power consumption: 9.5 A Fsdpfexuzp Tsx Ad Njgi • Climate class: N . Condition: used, 100% technically functional. Available: 4 units, price per unit

Condition: used, This listing is for a Sartorius MSA4202S 8.2g-2500g Precision Balance The unit is in full working condition and is ready for immediate release. Modular design (part of the Cubis® series) – the system is built of a weighing module + display/control unit + interface modules, designed for flexible configuration. Fgedjxuu Hlopfx Ad Noi High-resolution colour TFT display + touchscreen interface, offering an intuitive user interface. Multiple interfaces standard: USB, Ethernet, RS-232, SD card reader for data transfer and traceability. Functions typically include: weighing, density determination, averaging, formulation, percentage-weighing, check-weighing, totalising. Assisted (and optionally motorised) levelling; the system detects inclination and assists the user in levelling the instrument. Automatic internal calibration (isoCAL) for improved stability and lower drift. GLP/GMP/traceability ready: audit trail functions, user profiles, etc

Condition: good (used), Year of construction: 2015, Laboratory furnace for bending tests, 120 kW kiln, 900 °C chamber furnace 2 bending chambers Adjustable ceiling height Temperature range: max. approx. 900 °C Fsdpfxsxurpwo Ad Nogi Auxiliary heating Control cabinet PC, HP, Intel Core 2 Duo Voltage: 400 V Power: 120 kW Year of manufacture: 2015 Pre-chamber Width: 900 mm Height: 300 mm Depth: 580 mm Bending chamber Width: 520 mm Height: 115 mm Depth: 550 mm Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, This listing is for a Sartorius MSA124S Balance The unit is in full working condition and is ready for immediate release. The MSA124S is part of the Sartorius “Cubis” series of analytical balances, which are modular, high-performance instruments designed for milligram-level weighing. Very fine resolution / readability: it supports a readability of 0.1 mg (0.0001 g) in many configurations. Weighing capacity: around 120 g (for the “124” model) in the typical configuration. Excellent repeatability and linearity: e.g., repeatability ≤ ±0.1 mg, linearity ≤ ±0.2 mg. High-end interface and connectivity: E.g., Ethernet, USB, RS-232, optional Bluetooth; also SD-card reader for data transfer. Advanced ergonomic features: tiltable and removable display/control unit, motorised draft shield (in certain variants) to minimise environmental influences. Compliant with GLP/GMP/laboratory traceability requirements: audit trails, user profiles, leveling assistance etc in higher-end configurations Because of its high precision and fine resolution, the MSA124S is best suited for: Analytical laboratories performing gravimetric measurements, chemical/ pharmaceutical labs, material science labs. Applications where small sample masses must be weighed accurately (e.g., formulations, dosing, microparticles). Fgedpfjxuqmnsx Ad Nsi Environments requiring audit-trail/logging, connectivity, and data export (e.g., regulated labs). Use cases where drift/offset must be minimised and environmental effects (drafts, vibrations, static) must be managed.

Condition: used, This listing is for the Cole Palmer MasterFlex LS Pump Head 07528-10 with easy load ll pump head The unit is in full working condition and is ready for immediate release Cole-Parmer Masterflex L/S Easy-Load II Pump Head The Cole-Parmer Masterflex L/S Easy-Load II Pump Head is a high-performance peristaltic pump head designed for laboratory and industrial applications that require precise fluid handling. This updated model builds upon the original Easy-Load design, offering enhanced features for improved efficiency and ease of use. Key Features New Design and Automatic Tubing Retention: The updated design allows for easy tubing changes without removing the head from the drive. Automatic tubing retention secures the tubing without the need for manual adjustments, simplifying setup and reducing the risk of errors. Three-Roller Design: This design provides smooth and consistent flow, reducing pulsation and improving fluid transfer performance. Adjustable Occlusion: Fine-tune the occlusion to balance tubing life and pressure performance. By adjusting the "squeeze" on the tubing, users can optimize pressure, suction capabilities, and extend tubing life. Stainless Steel (SS) or Cold-Rolled Steel (CRS) Rotor/Roller: Choose between stainless steel or cold-rolled steel for increased durability and enhanced chemical resistance, catering to various operational needs. Stackable Design: The pump head is stackable for multichannel applications, and the rollers are offset by 45° to minimize pulsation when multiple pump heads are combined. Compact Design: The compact design ensures efficient use of space in laboratory or industrial setups. Multiple Tubing Sizes Compatibility: The pump head accepts various tubing sizes, including L/S 13, L/S 14, L/S 16, L/S 25, L/S 17, and L/S 18. This provides maximum flexibility for different fluid handling applications. Automatic Tubing Retention for Easy Setup: The automatic tubing retention system eliminates the need for manual adjustments, ensuring an easy setup process, improved tubing life, and better overall performance. Flow Rate Range Fgodpjxuqh Ejfx Ad Nsi The pump supports flow rates from 0.06 to 2300 mL/min, depending on tubing size and drive settings, providing flexibility for a wide range of applications.

Condition: used, This listing is for a Grant Bio McFarland DEN-1 Densitometer The unit is in full working condition and is ready for immediate release. Fgodpfx Asxup Nhod Noi The DEN-1 is a compact benchtop turbidity/densitometer instrument manufactured by Grant Bio (part of Grant Instruments). It is designed primarily for life-science and microbiology applications — for example, measuring the turbidity of cell suspensions (bacterial, yeast) or other particulate suspensions. Typical uses include: Determining cell concentration in fermentation or culture processes Assessing microbial susceptibility (via turbidity changes) Identifying microorganisms in test systems Measuring optical density / turbidity at a fixed wavelength for dyes or suspensions

Condition: used, This listing is for a Thermo Fisher Scientific Sorvall RC6+ Centrifuge The unit is in full working condition and is ready for immediate release. The Sorvall RC 6 Plus is a high-speed, refrigerated floor-standing centrifuge designed for large-volume separations in research, bioprocessing or production labs. According to the manufacturer, it: Is capable of speeds up to 22,000 rpm (which corresponds to about 55,200 ×g) without needing a vacuum system. Handles up to 4 × 1,000 mL bottles in a single run (i.e., ~4 L total) in its standard configuration. Uses a brushless high-frequency motor drive, and has full refrigeration for temperature control. Offers a broad rotor compatibility platform (including composite, aluminium, continuous flow etc) for different In short: this is a heavy-duty centrifuge for larger volumes and higher speeds, suited to labs that need more capacity and performance than benchtop or mid-range units. Key Features & Highlights Here are some of the standout features: Speed & G-force: Up to 22,000 rpm, approx. 55,200 ×g. Capacity: 4 bottles of 1,000 mL (4 L total) in typical configuration. Temperature control: Ability to set in range from -20 °C to +40 °C (in 1 °C increments), and maintain temperature accuracy of ±2 °C. Fgodexukkyopfx Ad Nji Motor/drive: Brushless high-frequency motor = faster spin up/downs, lower maintenance than older belt drives. Programmability & control: Up to 30 stored programs, with features like real-time control (delayed start/stop), ω² dt (integrator) for reproducibility, pre-cool function, and both rpm and RCF display. Safety & interlocks: Automatic lid-lock when running, door cannot be opened while rotor is spinning, and run terminates automatically in the event of certain malfunctions. Rotor flexibility: Supports a wide selection of rotors (fixed-angle, swinging bottle/bucket, continuous flow), including composite carbon-fibre rotors for higher performance / durability

Condition: used, This listing is for a Thermo Fisher Scientific RC 3BP+ Centrifuge The unit is in full working condition and is ready for immediate release. Key Features & Capabilities The RC 3BP Plus is designed for large-batch/volume processing: for example one rotor option handles 6 × 1 000 mL bottles or 12 blood-bags. Fgodpfxexukh Ee Ad Nji Maximum speed of up to 5 000 rpm, producing a maximum relative centrifugal force (RCF) of about 7 277 ×g. Refrigeration/temperature control: The unit offers temperature setting range roughly from –10 °C to +40 °C (or around +2 °C to +40 °C depending on source) and is capable of keeping sample chamber temperature stable. Microprocessor control with programmable run-profiles: 15 stored programs, features such as “Accumulated Centrifugal Effect (ACE)”, Step-Mode runs, slow-start/stop, etc. Quiet & robust operation: Noise level at maximum speed is under ~58 dBA. Safety and build quality: The rotor chamber, baseframe and guard ring are made of high-strength steel; automatic lid lock; electronic imbalance detection; door cannot open during spin; machine cannot start if door open. Technical Specifications (summarised) Here are some of the important specs to consider: Maximum speed: 5,000 rpm. Maximum RCF: ~7,277 ×g. Minimum speed: ~300 rpm. Temperature control range: Approximately –10 °C to +40 °C (or +2 °C to +40 °C depending on spec sheet) for samples. Capacity: 6 × 1 000 mL bottles or 12 × 250 mL blood bags (depending on rotor/adapter). Noise at max speed: < 58 dB(A). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). (≈981 lb) Drive: high-performance induction motor Intended Usage & Applications This centrifuge is suited for laboratories that need to process large volumes and relatively low speeds (compared with ultra-centrifuges). Some typical uses include: Blood banking/separation of large bag volumes. Bulk processing of bottles (1 L size) for sample prep. Applications where sample temperature control is important (hence the refrigeration). Labs requiring strong reproducibility via programmable runs, slow-start/stop, step modes

Condition: used, This listing is for the Sartorius Tare ENTRIS2201-1S Balance + Tare Printer The unit is in full working condition and is ready for immediate use The Sartorius ENTRIS2201‑1S (also referred to as ENTRIS 2202‑1SUS in some regions) is a precision top-loading laboratory balance designed for reliable, accurate weighing of samples up to approximately 2,200 g with 0.01 g readability. Key Specifications: Capacity: 2,200 g Fedpfx Ajxui S Ajd Njgi Readability (Resolution): 0.01 g (10 mg) Repeatability: Typically 0.01 g Linearity: Approximately 0.03 g Weighing Pan Size: Around 182 mm × 182 mm (7.1″ × 7.1″) Calibration Type: External calibration (requires separate calibration weight) Display: Backlit, high-contrast screen for clear visibility Interface Options: RS‑232 port for communication with PCs or printers Built-In Functions: Includes modes for basic weighing, counting, percent weighing, animal weighing, and density determination Language Support: Multiple languages supported such as English, French, German, Italian, Polish, Russian, Spanish Other Features: Anti-theft locking capability, easy-to-clean removable pan and draft shield Stabilization Time: Approximately 1.5 seconds Dimensions & Build: Compact size, robust design ideal for lab environments

Condition: used, This listing is for a Hulme Martin 10/3319 Heat Sealer The unit is in full working condition and is ready for immediate release. Fgedpfoxuiv Iex Ad Nji This is an mpulse heat sealers (for like-for-like thermoplastic film welding), constant heat sealers (for laminated or foil materials), vacuum sealers and other ancillary equipment. Designed for durability (20+ years or more in service according to their marketing) and easy servicing via plug-in heater bars and affordable consumables.

Condition: used, Dionex / ThermoFisher FLM: Temperature range: 5–70 °C (max. 15 °C below ambient temperature) Temperature accuracy: ±0.5 °C Temperature stability: ±0.1 °C Temperature precision: ±0.1 °C Column capacity: Up to 3 columns, max. 30 cm length Heating time: From 20 to 50 °C in less than 25 min (at 23 °C ambient temperature, ±0.5 °C) Cooling time: From 50 to 20 °C in less than 35 min (at 23 °C ambient temperature, ±0.5 °C) Control: All functions software-controlled via USB 1.1 I/O interfaces: 2 digital inputs, 2 programmable relay outputs Column recognition: Electronic identification system for 3 columns Switching valves: 1 or 2 thermostated microvalves with low dispersion (10 ports or 6 ports) Flow splitter: Nano, capillary, or thermostated micro-flow splitter with flow splitter identification system Flow control: Electronically controlled and actively balanced flow splitter, independent of solvent composition and backpressure Column flow range: 50 nL/min to 2.5 mL/min using a predefined splitter and active flow control Flow range selection: 50 nL/min to 1,000 nL/min (using a Nano-LC splitter) 0.5 μL/min to 10 μL/min (using a capillary LC splitter) 10 μL/min to 160 μL/min (using a micro-LC splitter) Fjdpfx Adoxtb Efs Nsgi Gradient delay time: Typically 600 nm. Noise: At a wavelength:

Condition: ready for operation (used), Specifications: Output speed: 10 to 600 r/min Torque output, maximum: 180 oz-in. (13 kg-cm) Speed regulation: Line: ±0.25% f.s. Load: ±0.25% f.s. Drift: ±0.25% f.s. Display: four-digit, seven-segment LED Input: Supply voltage limits: 90 to 130 Vrms 50/60Hz Current, maximum: 2.3A Temperature, operating: 0° to 40°C (32° to 104°F) Temperature, storage: –45° to 65°C (–49° to 149°F) Humidity (non-condensing): 10% to 90% Altitude: less than 2000 m Weight: 15 lb. (6.8 kg) Dimensions (W x H x L): 7 x 7 x 11.5 in. (178 x 178 x 292 mm) Comes with a Cole Parmer Masterflex Easy-Load II L/S Head Pump 77201-60. Pump specification: Material: Rotor/stainless steel (SUS303), Case/PPS (Polyphenylene sulfide) Specifications: Pump series: L/S Number of channels: 1 Max flow rate: 2900 mL/min Min flow rate: 0.034 mL/min Max flow rate per channel: 2900 mL/min Min flow rate per channel: 0.034 mL/min Volume per revolution with L/S 13 tubing: 0.06 mL Volume per revolution with L/S 14 tubing: 0.21 mL Fodpfx Aextbgvsd Njgi Volume per revolution with L/S 16 tubing: 0.8 mL Volume per revolution with L/S 25 tubing: 1.7 mL Volume per revolution with L/S 17 tubing: 2.8 mL Volume per revolution with L/S 18 tubing: 3.8 mL Compatible tube No.: L/S13, 14, 16, 25, 17, 18 Good working condition. Please check out our other listings as well.

Condition: used, This listing is for a Waters fraction Collector 111 chromatography system The unit is in full working condition and is ready for immediate release. The Waters Fraction Collector III is designed for flexible fraction collection in both HPLC and LC-MS workflows. Fgsdpfoxtbcqox Ad Nsi It supports high flow rates, up to ~300 mL/min. It accommodates a wide variety of collection vessels/racks. For example: standard test-tube racks (13-18 mm O.D.), eppendorf tubes, scintillation vials, microtiter plates (4 × 96/384), and preparative funnel racks (4 × 32 positions). Multiple operational modes for fraction collection: time-based, volume, drop count, signal (e.g., detector threshold), peak mode (peak end time, request time, up to 10 out of 99 peaks) and window mode (start/end times) etc. The system is controllable either locally (via keypad + LCD) or remotely via software (e.g., Empower 3, MassLynx) for integration into automated purification workflows. Low nozzle-shift time (0.1 s between tube centers) helps minimise dead time between fractions. Diverter valve option: allows unwanted flow (e.g., column void, non-target peaks, excess solvent) to be diverted to waste, improving collection efficiency

Condition: ready for operation (used), Beckmann coulter SX4750 Rotor Max Rpm 3750 680 g Good working condition. Fodpfextagbox Ad Nsgi Please check out our other listings as well.

Condition: ready for operation (used), The Optima XL ultracentrifuge is used to generate centrifugal forces for the separation of particles. It is available in three models: the XL-100K, with maximum speed of 100 000 respectively. Classified “S,” it can be used with all currently manufactured Beckman Coulter preparative rotors; it is also designed for zonal and continuous flow operation. Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 465 kg (1025 lb) Fgedpfx Adextadto Nji Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (overall) 120.7 cm (47.5 in.) Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94.0 cm (37 in.) Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67.3 cm (26.5 in.) Clearances . . . . . . . . . . . . . . . . . . . . . . . 5.1 cm (2 in.) sides; 15.2 cm (6 in.) rear Finish .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . urethane paint on top surface; general-purpose paint on other surfaces; coated polycarbonate finish on control panel Maximum heat dissipation into the room . . . . . . . . . . . . . 1.0 kW (3400 Btu/hr) Humidity restrictions . . . . . . . . . . . . . . . . . . . . . . . . . .

Condition: excellent (used), Incubator in very good condition Fgedpfx Aexr S Died Nji The UB 6760 model is part of the Heraeus 6000 series and is a universal incubator with forced air circulation, ideal for microbiological and biochemical applications. Thanks to its modular design, it can be flexibly adapted to various laboratory requirements. Temperature range: ambient temperature +5°C to 70°C Internal dimensions (W×H×D): approx. 1000 × 1320 × 510 mm External dimensions (W×H×D): approx. 1200 × 1820 × 900 mm Capacity: 676 liters Shelves: 2 pcs, up to 39 positions possible Temperature deviation at 37°C: ±1.4°C spatially, ≤0.5°C over time Power supply: 230 V, 50/60 Hz Power: approx. 1170 W Weight: approx. 239 kg

Condition: excellent (used), Heater/incubator in very good condition, fully operational. Manufacturer: Heraeus (Thermo Scientific) Model: B 6760 Incubator Description: Heraeus 6000 series incubators feature a unique, modular design that allows for configuration according to highly specific requirements. The incubators can be equipped with a range of standard modules, tailored to suit different needs or applications. Features: • Stainless steel interior with rounded edges and corners Fedpfx Adjxr S A Ss Njgi • Maximum temperature: 70 °C • Stackable design (models B6060 – B6200) • Process control (optional) • Temperature controller • RS 232 interface (optional) • Over-temperature protection • 24-hour timer (20 h at 60 Hz) – optional Technical Specifications: External dimensions (W×H×D): 1200 × 1707 × 715 mm Internal dimensions (W×H×D): 1000 × 1366 × 550 mm Capacity: 751 l Shelves supplied / maximum number: 2 / 39 Weight: 239 kg Temperature range: up to 70 °C Temperature deviation at 37 °C: 1.5 °C Temperature fluctuation over time: ≤ 0.5 °C Power supply: 230 V / 50–60 Hz Power consumption: 1170 W

Condition: used, functionality: unexamined, machine/vehicle number: Miniload II, Used Leica Miniload II microscope/microhardness tester Fjdpfx Aoxr Ev Sod Nsgi Manufacturer: Leica Microsystems Model: Miniload II Without its own lighting power supply Equipped with 50x and 10x lenses