Transportservice Zauritz

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ Ljdpjzduplefx Amrjac 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Furnace, Chamber Furnace, Heat Treatment Furnace, Hardening Furnace, NABERTHERM Professional Industrial Chamber Furnace – 1150°C, Used Machine Manufacturer Nabertherm (Made in West Germany) Model N81 Serial Number 72019 Year of Manufacture 1988 Item Number 7082 Technical Specifications Maximum Temperature: 1150°C Power Rating: 18 kW Operating Voltage: 380 V, 3N~ (Three-phase industrial power supply, 50 Hz) Lajdpszc Ihaofx Amrec Current Consumption: 27 A Furnace Door Opening: 500 × 250 mm Overall Dimensions Width: 1200 mm Depth: 1800 mm Height: 1750 mm

Condition: used, Year of construction: 1990, max. temperature 1280 Grad size of opening ca. 350 x 350 mm depth of chamber ca. 400 mm heating capacity 3,3 kW Total Dimension 830 x 700 x 600 mm weight of the machine ca. 120 kg Lodozcq Dkspfx Amroac control "Program Controller S8" Only ceramics were fired in this furnace. It has a very low power consumption Base frame not included in price.

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 1787, functionality: fully functional, temperature: 1,150 °C, total length: 23,700 mm, conveyor belt width: 620 mm, heating capacity: 320 kW (435.08 HP), pass-through height: 100 mm, The system has seen very little use and is in excellent condition. Lajdpfezclphox Amrsc TECHNICAL DETAILS Maximum operating temperature: 1150°C Belt width: 620 mm Installed heating capacity: 320 kW in 8 zones Fuel: Natural gas Operation: Hydrogen + Nitrogen (N2 + H2) integrated Usable height: 100 mm Dimensions Infeed table length: 2 m Burn-off zone LED3 length: 1.5 m Sintering zone length: 7.5 m Rapid cooling zone length: 1 m Convective cooling zone length: 2 x 4 m Flame-free outlet with air shower length: 2 m Outlet table length: 2.7 m Total system length: 23.7 m Total system width: 2.3 m MACHINE DETAILS Natural gas consumption: 25 m³/h (80 mbar) N2 consumption: 45-65 m³/h (max. 80 mbar) H2 consumption: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temperature) EQUIPMENT Flame-free outlet Ceramic muffle Dual thermocouples Programmable Online diagnostic system Low NOx RS recuperative burners SiSiC burner tubes LED 3 de-waxing zone (utilizes the chemically bound energy of waxes and improves burn-off conditions, especially for heavy powder metallurgy parts (>0.9 kg)) "Target-Actual value belt speed comparison" function

Condition: good (used), Year of construction: 2014, For sale: a professional Nabertherm L40/12 muffle furnace with a working temperature of up to 1200°C. Ideal for ceramics, laboratories, heat treatment of metals, sintering, sample roasting, and many other applications. Model: L 40/12 / B180 Lasdpezb Iv Uefx Amrec Power: 6 kW Power supply: 400 V Max. temperature: 1200 °C Chamber volume: 40 liters Year of manufacture: 2014 Condition: Functional, heats up properly Weight: approx. 70 kg

Condition: used, Year of construction: 1998, power: 40 kW (54.38 HP), input voltage: 400 V, input current: 58 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, Electrically heated Nabertherm N 825 / AS furnace with a drop-down door. Maximum temperature: 750 °C Power: 40 kW Programmable controller: Nabertherm C40 Laodpfjzb Dqzjx Amroc

Condition: excellent (used), - for unattended operation - for temperatures from 100 °C to 300 °C - external dimensions: 1500 x 2773 x 2096 mm (W x H x L) - clear internal dimensions per chamber: 800 x 800 x 1100 mm (W x H x L), height with beams = 700 mm - maximum batch dimensions: 700 x 600 x 1000 mm (W x H x L); maximum weight: 500 kg Lajdpfx Ajzbnnwjmrjc Connection values per chamber: circulation = 3.0 kW (1 unit); electric heating = 30 kW (1 control group) Temperature accuracy +/- 5 K at 150 °C, 250 °C, 300 °C adjustable up to +/- 1.5 K temperature accuracy depending on the batch geometry 1 Protherm 500 program controller

Condition: new, Year of construction: 2026, power: 80 kW (108.77 HP), temperature: 230 °C, inner dimension length: 3,200 mm, inner dimension width: 1,400 mm, inner dimension height: 2,370 mm, total length: 3,960 mm, total width: 1,880 mm, total height: 3,370 mm, control type: PLC-controlled, Equipment: CE marking, Powder coating Oven (Oil/Gas) Internal dimensions LxWxH: 3200 x 1400 x 2370 mm External dimensions LxWxH: 3960 x 1880 x 3370 mm Fuel: Oil or GAS, buyer can choose the burners Heating power: 80 kW (1 burner) Maximum working temperature: 230C; Heat resistant recirculating fans: 1 x 1,1 kW 10""Touch screen“ control Functions: preheating, degassing, drying, polymerisation Temperature sensors in working chamber: 2 vnt. Two wing doors on one side Ready for 4 rails (rails not included) Key features: Solid construction Special frame design reduce heat loss Removable side panels for easy maintenance Equipped with special located ventilation slots - keep insulation material in order Stainless steel panels in Heat exchanger zone Inhouse engineered heat resistant fans - cool, quiet, long - life Doors equipped with explosion proof, adjustable lathes Special design door handles for lower heat transfer Reliable Italian RIELLO burners Control Features 10"touch screen control Standard programs: Preheating, Degassing, Curing, Drying Stores multiply curing recipes Integrated safety features HNS - heat management system, measures air temperature in few points. prevents overheating of curing parts Drying mode - time control exhaust and blow-in fresh air Vent mode - for higher finish quality Delivery in 2 weeks after payment WARRANTY: 12 month We can organise delivery accross the EU for speacial price. PRICES are EXCLUDING VAT. WE ARE LOOKING FOR SALES PARTNERS Ledoy Uxrnopfx Amrsac

Condition: new, Year of construction: 2026, temperature: 230 °C, inner dimension length: 3,800 mm, inner dimension width: 1,600 mm, inner dimension height: 2,270 mm, total length: 4,560 mm, total width: 2,080 mm, total height: 3,270 mm, control type: PLC-controlled, Equipment: CE marking, Internal dimensions LxWxH: 3800 x 1600 x 2270 mm External dimensions LxWxH: 4560 x 2080 x 3270 mm Fuel: Oil or GAS, buyer can choose the burners Heating power: 160 kW (2 burners in total) Maximum working temperature: 230 o C; Heat resistant recirculating fans: 2 x 1,1 kW 10""Touch screen“ control Functions: preheating, degassing, drying, polymerisation Temperature sensors in working chamber: 2 vnt. Two wing doors on both sided (tunnel) Ready for 5 rails (rails not included) Key features: Solid construction Special frame design reduce heat loss Removable side panels for easy maintenance Equipped with special located ventilation slots - keep insulation material in order Stainless steel panels in Heat exchanger zone Inhouse engineered heat resistant fans - cool, quiet, long - life Doors equipped with explosion proof, adjustable lathes Special design door handles for lower heat transfer Reliable Italian RIELLO burners POWDER COATING OVEN FLOWSYNC Control Features 10"touch screen control Standard programs: Preheating, Degassing, Curing, Drying Laodpfjy Ud H Rsx Amrec Stores multiply curing recipes Integrated safety features HNS - heat management system, measures air temperature in few points. prevents overheating of curing parts Drying mode - time control exhaust and blow-in fresh air Vent mode - for higher finish quality WE ARE LOOKING FOR SALES PARTNERS

Condition: not inspected (used), functionality: unexamined, We are selling a used gas console that was previously used in an Eltropuls plasma nitriding system. Included are 4 Bronkhorst mass flow controllers (MFCs) and other control electronics. Lajdpfsy Sxtgex Amrec We acquired these specific components as part of a package with other items, but we do not need them. Therefore, the components are offered here, untested, as a source of spare parts for interested parties.

Condition: used, Year of construction: 2011, max. temperature 1280 Grad size of opening 350 x 250 mm depth of chamber 500 mm volume 41 L voltage 400 V total power requirement 15,0 kW weight of the machine ca. 277 kg dimensions of the machine ca. 1,15 x 1,45 x 1,35 m - Serial-No.: 219660 Ledpfx Aey R Efgjmroac - control: NABERTHERM B300 - with swivel table 340 x 550 mm

Condition: new, Year of construction: 2024, functionality: fully functional, power: 26 kW (35.35 HP), inner dimension length: 2,000 mm, inner dimension width: 1,000 mm, inner dimension height: 1,600 mm, total length: 2,180 mm, total width: 1,702 mm, total height: 2,593 mm, actuation type: electric, fuel type: electric, heating capacity: 24 kW (32.63 HP), Equipment: CE marking, documentation/manual, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Immediately Available ⚡ Professional Support! ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for a customized transport offer. ✅ Immediately available – 1 unit in stock ✅ Brand new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2-year warranty Available from stock – no production lead time ⭐ Matech Powder Coating Oven with Electric Heating – MATOVENB-101620 MATECH QUALITY – WITH PROTON SERVICE! ☘️ Immediate availability ☘️ Efficient ☘️ Professional curing ✅ Electrically heated powder coating oven ✅ Stock item – available for immediate delivery ✅ No production waiting times ✅ Compact design for small and medium-sized workpieces ✅ 2 m internal length for longer parts ✅ Digital temperature control up to 220°C ✅ Adjustable curing temperature and cure duration ✅ Programmable automatic exhaust fan function ✅ Audible signal at the end of the curing cycle ✅ Insulated door with special locking system ✅ Robust sandwich panel construction ✅ Excellent heat retention due to heavy-duty insulation ✅ Timer function from 10 minutes up to 24 hours ✅ Automatic shut-off after processing is complete Ljdey N En Eepfx Amroac ➖➖➖➖➖ Technical Details: ✔️ Model: MATOVENB-101620 ✔️ Internal and external dimensions: see technical drawing in the image gallery ✔️ Electric heating power: 24 kW ✔️ Blower capacity: 3,000 m³/h ✔️ Recirculation fan: 1.50 kW ✔️ Exhaust fan: 0.53 kW ✔️ Total power consumption: approx. 26 kW ±10% ✔️ Digital temperature control ✔️ Infinitely variable temperature adjustment up to 220°C ✔️ Interior: 1.2 mm galvanized steel ✔️ Exterior: 1.2 mm powder-coated steel ✔️ Insulation: 150 mm ✔️ 50 mm mineral wool + 100 mm fiberglass ✔️ Adjustable curing time ✔️ Adjustable exhaust fan function ✔️ Audible signal after process completed ✔️ Control panel: 1 pc ➖➖➖➖➖ ⚙️ Optional Upgrades ✅ PID controller for highly precise temperature regulation ✅ Touchscreen control panel and smartphone operation ✅ Ramp-heating mode for defined temperature profiles ✅ Insert rack system or part trolley ✅ Special dimensions and custom designs upon request Rails and carriers are not included in the price. ➖➖➖➖➖ Secure your stock unit now! This unit is currently available 1 x in stock. Ideal for companies seeking a professional powder coating solution on short notice. ➖➖➖➖➖ ✳️ Preserve your liquidity! We offer various financing options. Please contact us for leasing, hire purchase, or installment payment plans. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and benefit from service and quality advantages! ✨ Inquire now – get your business ready for professional powder coating!

Condition: new, functionality: fully functional, power: 120 kW (163.15 HP), input voltage: 380 V, inner dimension length: 7,200 mm, inner dimension width: 1,500 mm, inner dimension height: 1,800 mm, total length: 8,233 mm, total width: 1,800 mm, total height: 2,553 mm, overall weight: 3,000 kg, control type: NC control, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately based on delivery address. Please contact us for an individual transport quote. ✅ Made to order ✅ Brand new, unused professional industrial unit ✅ Proton Maschinenbau GmbH is the exclusive authorised European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment 📦 Please also enquire about current stock availability. ➖➖➖➖➖ ⭐ Matech Powder Oven with Electric Heating – MATOVENB-151872 MATECH QUALITY – WITH PROTON SERVICE! ☘️ Efficient ☘️ Powerful ☘️ Professional Curing ✅ Electrically heated powder oven ✅ Digital temperature control up to 220°C ✅ Adjustable curing temperature and cure time ✅ Adjustable automatic exhaust fan function ✅ Audible signal at end of cure cycle ✅ Insulated door with special locking system ✅ Robust sandwich panel construction with high-performance insulation ✅ Timer function from 10 minutes up to 24 hours ✅ Automatic shutdown at end of process ✅ Compatible with mobile part carriage ✅ Optional insert shelving system for small batch production Laedpfx Ajy Ny Tpjmrec ♨️ Also available (optional) as a high-temperature version up to 500°C. ⚡ Depending on model/project, also available with electric, gas or diesel heating. ➖➖➖➖➖ Technical Specifications: ✔️ Model: MATOVENB-151872 ✔️ Internal / external dimensions: see technical drawing in photo gallery ✔️ Electric heating power: 120 kW ✔️ Blower capacity: 2 x 4,500 m³/h = 9,000 m³/h ✔️ Recirculation fan: 2 x 3.00 kW ✔️ Exhaust fan: 0.75 kW ✔️ Total power consumption: approx. 128 kW ±10% ✔️ Digital heat control ✔️ Continuously adjustable temperature up to 220°C ✔️ Interior: 1.2 mm galvanised steel ✔️ Exterior: 1.2 mm powder-coated steel ✔️ Insulation: 150 mm ✔️ 50 mm mineral wool + 100 mm glass fibre ✔️ Adjustable curing time ✔️ Adjustable exhaust fan function ✔️ Audible signal after process completion ✔️ Control panel: 1 pc More MATOVENB powder ovens in various sizes available. Dimensions and technical data of other models can be found in the attached catalogue. ➖➖➖➖➖ ⚙️ Optional Control Functions ✅ PID control for precise temperature management ✅ Touchscreen control panel and smartphone operation ✅ Ramp-heating mode for defined temperature profiles ✅ Process parameter memory ✅ Weekly & monthly reporting at the touch of a button ➖➖➖➖➖ 🛡️ Safety and Process Control Safety sensors to prevent overheating Automatic shutdown in case of malfunction Acoustic warning signals in case of faults Smoke extraction via automatic venting ➖➖➖➖➖ ♨️ Ramp-Heating Mode (optional) Precisely control temperature profiles and holding times: • Reach target temperature in a defined time • Maintain the desired setpoint time • Controlled cooldown to target temperature • Automatic notifications for process events ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer various financing models. Please contact us for leasing, hire-purchase or instalment payment options. ➖➖➖➖➖ Special sizes or customised designs available on request. We are happy to plan a suitable solution for your workshop. Get in touch now – prepare your business for professional powder coating!

Year of construction: 2005, condition: used, functionality: limited functionality, Fischer / Stocker Electric Recirculating Oven with Blower, Year of manufacture: 2005 Upgraded 2022/23 including: - Additional insulation with cladding - Siemens control system with programmable selection and memory - Heat-resistant fan shaft, including repositioning of the fan unit within the chamber - Installation of three additional 1.5kW heating elements Lajdpsyx H Swsfx Amrsc Connection load: 45kW Increased heating capacity from original +250°C to +450°C Fully extendable slide-out floor Installation dimensions (D x W x H): 3,100mm x 2,750mm x 2,900mm (including attachments) Usable internal chamber dimensions (D x W x H): 2,500mm x 1,700mm x 1,500mm Originally used in GRP component production for aerospace parts, purchased second-hand by us in 2020 and modified as detailed above for curing/heat-setting paint jobs. Due to changing project requirements, this oven became too small for our needs and was never put into operation at our facility! Ideal for electrostatic and/or wet painting, tempering, or special applications! Electrically fully functional and thus immediately ready for operation. However, due to extended storage, partial touch-ups to adhesive seals (cladding) and door seals will likely be necessary! Price: net ex works, negotiable!

Condition: good (used), Internal item no.: 25121 Hardening furnace Nolzen WL 20 / 19 / 40 Max. temperature: 1150°C Ledsyxpdcjpfx Amroac Power: 8KW Connection: 380V Internal chamber dimensions: W 20 / H 19 / D 40 cm Dimensions (LxWxH): 60 x 76 x 84 cm Weight: approx. 200 kg

Year of construction: 1998, condition: ready for operation (used), functionality: unexamined, input frequency: 50 Hz, usable tank capacity: 2,100 l, temperature: 100 °C, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Oven Data Usable volume: 2.1 m³ Drying temperature: 100 °C MACHINE DETAILS Dimensions (LxWxH): 200cm x 150cm x 150cm Electrical data Voltage: 400 / 230 V, 50 Hz Lasdpfxeyxdafo Amroc

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: 604348, functionality: unexamined, operating temperature: 100 °C, heating capacity: 9 kW (12.24 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum drying temperature: 100 °C MACHINE DETAILS Dimensions LxWxH: 143 x 70 x 35 cm Type of heating: electric Ljdsyxc Tqspfx Amreac Electrical data Rated voltage: 400 V/230V 50 Hz Connected load: 11 kVA Heating capacity: 9 kW Rated current/Fuse protection: 16.5 A / 20 A Protection class: IP 43

Year of construction: 1996, condition: ready for operation (used), functionality: unexamined, operating temperature: 250 °C, heating capacity: 36 kW (48.95 HP), usable tank capacity: 4,500 l, machine/vehicle number: 603928, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum drying temperature: 250 °C Usable volume: 4.5 m³ MACHINE DETAILS Type of heating: electric Dimensions (LxWxH): 200 x 150 x 150 cm Ljdpfoyxc I Ijx Amrjac Electrical Data Rated voltage: 400/230 V 50 Hz Connected load: 40 kVA Heating capacity: 36 kW Rated current/fuse: 58 A/63 A Protection class: IP 43 Exhaust air flow at 20°C with dampers open: 376 m³/h Exhaust air flow at 20°C with dampers closed: 133 m³/h

Year of construction: 1998, condition: good (used), electrically heated recirculating oven Usable volume: 2 m³ Maximum drying temperature: 100 °C Lasdpfx Amjyw Ntborjc

Condition: used, degree 250 °c width . mm depth . mm No.8505548 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Laodpfxeyutupe Amrec We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), Year of construction: 2014, FOUR-BELT TWO-LINE FURNACE - Brand: IKEO (Italy), year 2014 Lajdpfx Ajymdzqemrsc o Inlet dimensions: 80*35 o Conveyor speed: 0.1 to 3 m/min o Heating chamber dimensions: 80*35*1140 o Cooling chamber dimensions: 80*35*1525 o Temperature: 1100°C o Conveyor belt made of thin stainless steel sheet o Atmosphere: Nitrogen + H2 or Argon o Power: 25 kW This furnace will only be available in June. Viewings possible in Switzerland.

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ Lasdpfx Asyg H Erjmrec 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Ljdpsyg H Dhjfx Amrjac Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Year of construction: 2000, machine/vehicle number: M000000Y5670, functionality: unexamined, Used TEL Alpha-8SE-E Vertical Gas Diffusion Furnace Manufacturer: TEL Tokyo Electron Model: Alpha-8SE-E Manufactured: 11.2000 Serial No.: M00000Y5670 No books or documentation included. Laodpfx Ajygvzvjmrec Pumps/Motor: 2 x Toshiba 3-phase induction motor, 480 Volt, 60 Hz.

Year of construction: 1993, condition: good (used), machine/vehicle number: 86317, Offer 25335 Technical specifications: - Nominal / continuous temperature, stepless: up to 1280 °C - Three-sided heating (bottom and sides) - Temperature control via NABERTHERM Controller C 19 - Drive: 400 V / 5.5 kW - Internal dimensions approx.: W 250 x H 140 x D 350 mm - Usable volume: 11 L - Base frame: W 900 x H 900 x D 950 mm - Required space approx.: W 800 x H 600 x D 750 mm - Weight approx.: 80 kg Laedpsx D U Eyjfx Amrjc