Trophy-Sport

Condition: ready for operation (used), Four-column press SP60/670 - Achtermann & Co. Stuttgart - Pressing force: 60 tons Lodezcxhwopfx Amrjac - Distance between columns: 670 mm - Distance between columns / laterally: 400 mm - Table size: 900 x 750 mm - Vertical clearance: 520 mm - 6 x T-slots in the upper platen - 6 x T-slots in the table Dimensions: L x W x H 2 x 1.5 x 2 meters / Weight 3000 kg Subject to errors and omissions.

Condition: ready for operation (used), Manual spindle press / 25 tons -Clearance between columns: 400mm -Spindle diameter: 80mm -Vertical clearance: 420mm Lodpjzcxdljfx Amrjac -Various clamping jaws Dimensions: L x W x H 1.2 x 0.8 x 2 meters / Weight: 700kg Errors and omissions excepted.

Condition: good (used), Hand-operated spindle press, homemade, from a training center Pressing force: approx. 5-10 tons Lodpfx Ajzcqmlsmreac Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1979, functionality: fully functional, Spindle press W+N A. Neher Maschinenfabrik, Aschaffenburg Type HSP-1670 Year of manufacture: 1979 Weight: 635 kg Pressing force: 16 tons Working stroke, max.: 250 mm Distance from table to ram: 370 mm Lsdpoy U Ekdofx Amrsac Column width: 500 mm Working area: 500x400 mm

Condition: good (used), Year of construction: 1987, Equipment:  Pressing force: 160 kN / 16 MPa  Spindle diameter: 60 mm  Spindle pitch per revolution: 32 mm  Clearance between columns: 410 mm  Max. clear height between table and ram: 270 mm  Table area: 410 x 280 mm  Weight: 335 kg Laedpfx Asy S Syasmroc Condition: good, little use

Condition: excellent (used), pressing force: 16 t, Spindle Press Manufacturer: Neher Model: SPP-16/70 Weight: 650 kg Pressing force: 16,000 kg Max. stroke: 250 mm Column gap: 500 mm Table size: 780x400 mm Clamping plate dimensions: 480x300 mm Laedpfx Asy N I R Aemrec For pressing in components or testing tools.

Condition: good (used), Year of construction: 1982, machine/vehicle number: 14899, Offer 26027 Technical specifications: - Max. pressing force: 32 t - Max. ram stroke approx.: 250 mm - Max. installation height: 350 mm - Travel per handwheel revolution approx.: 48 mm - Upright spacing / throat clearance approx.: 575 mm - Table surface with 4 diagonal T-slots: 575 x 475 mm - Pressure plate area: 500 x 260 mm - Upper tool holder: 30 mm - Through-hole in table: 200 mm Ledjy Icb Hjpfx Amreac - Required space approx.: W + D 1000 / 1500 x H 2000 / 2400 mm - Weight approx.: 1000 kg

Condition: good (used), Year of construction: 1963, Stroke = 250 mm On request, transport and loading can be organized across Europe at an additional cost. Prices excl. VAT Inspection possible by appointment. Contact us – our team will be happy to assist you. Lsdpfx Asy H Ic Hsmrsac Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your production? Or do you want to sell your equipment? For further information or contact options, please use the contact form.

Condition: used, functionality: fully functional, pressing force: 10 t, stroke length: 115 mm, table width: 470 mm, table length: 360 mm, throat depth: 190 mm, distance table to ram: 210 mm, total length: 1,470 mm, total width: 1,400 mm, total height: 1,800 mm, overall weight: 430 kg, Manual spindle press with C-frame Pressing force: 10 tons Clamping area: 470 x 360 mm Maximum installation height between table and ram: 210 mm Throat depth: 190 mm Spindle stroke: 115 mm Table bore: Ø 100 mm Pin bore: Ø 32 mm Weight: 430 kg Dimensions: Width: 1470 mm (ring diameter) Depth: 1400 mm Height (including Euro pallet): 1800 mm Year of manufacture: unknown Included accessories: - 10 pins Ø 32 mm - 2 clamping claws - 1 bending die base with adjustable micrometer stop Laedpfeyzy R Eox Amrec - 4 bending punches The press has been rarely used and is therefore in very good condition. The hand-scraped, adjustable dovetail guides are also in excellent condition. The spindle shows no signs of wear. Sale is due to impending retirement. Inspection possible during our business hours or by appointment.

Condition: good (used), Year of construction: 1974, Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Manufacturer: NEHER, manual spindle press type SPPG-40/100 -Pressure: max. 40,000 kg -Stroke: 600 mm -Intermediate dimension: 715 mm -Spindle mount: Ø 40 mm -Table size: 1100 x 600 mm, groove width mm -Table bore: Ø 120 mm Laedpfsypvtkox Amrsc -Dimensions: 1800/1800/H2400 mm -Weight: 1940 kg

Condition: ready for operation (used), Year of construction: 1984, Travel X/Y/Z: 1600mm/1000mm/1100mm, workpiece carrier (pallets) X/Y: 800mm/800mm-1000mm, change time: 38s, table rotation range: 360°, max. table load capacity: 2000kg, feed rate: 10m/min, rapid traverse: 15m/min, spindle power: 32kW, tool positions: 50, spindle taper: ISO50, speed: 4500rpm. Machine dimensions X/Y: 5800mm/5200mm, weight: approx. 25000kg. Documentation available. An on-site inspection is possible. Lsdsxl Elyopfx Amreac

Condition: used, Year of construction: 1980, functionality: fully functional, Spindle press by Hiller & Lutz Year of manufacture: 1980 Ledpfx Amswxyn Eorjac Fully functional In good used condition Technical details: The Hiller & Lutz HP71 is a classic, robust manual spindle press (also referred to as an arch press), widely used in metalworking shops, workshops, and industrial environments for straightening, bending, pressing-in, or punching operations. Here are the standard technical specifications for this model (values may vary slightly depending on year of manufacture): - Press force: approx. 20 to 25 tons (the "71" model number typically refers to frame size/width; actual force depends on spindle pitch and flywheel diameter) - Spindle diameter: approx. 70 – 80 mm - Stroke: approx. 200 – 300 mm (depending on spindle length) - Throat depth: approx. 250 – 300 mm (distance from spindle center to frame) - Table size: approx. 500 x 400 mm - Maximum opening height: approx. 400 – 500 mm (with spindle fully extended) - Flywheel diameter: approx. 1,000 – 1,200 mm Machine features: - Design: Heavy-duty C-frame made of cast iron for high rigidity - Drive: Manual operation via large flywheel; energy is generated through the wheel’s inertia during operation - Table: Usually features a central through-hole and T-slots for tool mounting - Weight: Net weight typically ranges from 700 kg to 950 kg, ensuring stable setup (usually requires bolting to the foundation) Machine dimensions (main body): - Height: approx. 1,800 mm to 2,100 mm (depending on spindle position) - Width (frame): approx. 500 – 600 mm - Depth (base): approx. 800 – 1,000 mm Additional note: Dimensions depend on whether only the machine body or the total required space including flywheel overhang is considered.

Condition: used, Year of construction: 1960, pressure 10 t distance between columns 260 mm dayligth 210 mm Laodpfowl N Sajx Amrjc table surface area 275 x 260 mm

Condition: used, Year of construction: 1970, pressure 1 t Stroke 315 mm Lajdpfx Asv Td Eremrec

Condition: used, Year of construction: 1973, pressure 28 t distance between columns 510 mm dayligth 380 mm Lodov Svc Tjpfx Amreac stroke 260 mm weight of the machine ca. ca. 750 kg

Condition: used, Year of construction: 1971, pressure capacity max. 80 t Stroke 500 mm table surface area 960 x 810 mm spindle pitch 72 daylight between the columns 950 / 540 mm passage 640 mm machine weight ab. 4500 kg dimensions of the machine ca. 2,0 x 2,0 x 3,85 m Hydraulic quick adjustment 500mm Flywheel Ø2000mm 4 prism bases for straightening waves different support frames Ljdpfx Ajvxwzkomrjac

Condition: good (used), Year of construction: 1991, functionality: fully functional, - Normal pressure force kN (Mp) 160 (16) - Maximum achievable pressure kN (Mp) 200 (20) - Spindle diameter 60mm - Spindle pitch per revolution 32mm - Number of guide columns 2 - Clear width between columns 410mm Lajdpsvnbrxefx Amroc - Max. clear installation height between table top and ram 270mm - Ram stroke 210mm

Condition: ready for operation (used), Design: vertical press with four columns. Lasdotty Nkjpfx Amrec The vertical press platen is driven by an electric motor, the lower platen can be pulled out with the tool. -Dimensions: 2100x1600x3000mm -plate size: 950x1120mm -Electrical data: 380V; 43A; 22kW

Condition: excellent (used), Year of construction: 1963, functionality: fully functional, pressing force: 28 t, manual spindle press 28 tons in very good condition Laodpfx Aequqpaomrjc

Condition: good (used), Year of construction: 1974, Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press -Manufacturer: Kalisz, manual screw press type YB-1 with solid base -Pressure: max. 10,000 kg -Stroke: 200mm -Intermediate size: 320 mm -Spindle holder: Ø 20 mm Laodoigwdwepfx Amroc -Table size: 290 x 250 mm, slot width 14 mm -Dimensions: 1160/860/H1750 mm -Total weight: 350 kg

Condition: used, Year of construction: 1964, pressure:80 kN distance between columns:650 mm table-size:600 x 500 mm stroke:300/400 mm Laedecxxpuepfx Amrsc :465 mm dimensions of the machine ca.:2,10 x 1,20 x 1,20 m