Weidplas GmbH

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 8001171773, turning diameter over cross slide: 300 mm, turning diameter over bed slide: 460 mm, center height: 230 mm, spindle speed (max.): 1,250 rpm, spindle speed (min.): 28 rpm, center height over cross slide: 150 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time between 08/04/26 and 16/04/26! TECHNICAL DETAILS Spindle speed range: 28 to 1250 rpm Spindle bore: 58 mm Distance between centers: approx. 1000 mm Center height over bed: 230 mm Center height over carriage: 150 mm Swing over bed: 460 mm Swing over carriage: 300 mm Three-jaw chuck diameter: 250 mm Three-jaw chuck manufacturer: FORKARDT MACHINE DETAILS Operating voltage: 380 V Control voltage: 220 V Frequency: 50 Hz Dimensions & Weight L x W x H: 3000 x 1000 x 1800 mm Machine weight: 2 t Iedpeyk Hw Aofx Ah Eetc EQUIPMENT Tailstock Multifix tool holder Matching workshop cabinet with accessories

Condition: used, Year of construction: 1987, 1 piece lead- and feed-screw lathe POTISJE USA 225 complete with various accessories, as per photos and inspection. Colour: green. Year of manufacture: 1987. Condition: used. Isdpfx Ahjykqpve Eetc

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2552 Year of manufacture: 1983 Iedpfx Ahsykca He Estc Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MK 4 Motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Spindle speed via 12 gearbox steps - EMCO 3-jaw scroll chuck Ø 200 mm with turning and boring jaws - Multifix size B quick-change tool post with 3 change cartridges - Automatic longitudinal and face feed - Coolant system - Spindle brake - Emergency stop - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1400 kg Very good condition

Condition: used, Year of construction: 2000, turning diameter over bed 440 mm turning diameter over slide rest 270 mm turning length 1.500 mm center height over bed 220 mm digital readout FAGOR 3 Achsen Itsdpjykb Hfofx Ah Esc turning diameter in the gap 620 mm centre distance 1.500 mm bed width 280 mm spindle bore Ø 52 mm turning speed range 30 - 2.360 U/min 3-jaw-chuck diameter 250 mm quick change toolholder KLOPFER Typ GX2B drive capacity - spindle motor 6,3 kW taper in tailstock-quill MK 4 dia. of quill 60 mm quill stroke 200 mm voltage 380 V total power requirement 6,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,90 x 1,10 x 1,75 m - Serial-No.: D8KK0633 - 3-axis digital readout FAGOR - Quick-change steel holder - rapid clamping boring chuck RÖHM 1-13 mm - Coolant device

Condition: used, Year of construction: 2013, turning diameter over bed slide: 435 mm, turning diameter over top slide: 245 mm, center height: 210 mm, center width: 1,500 mm, overall weight: 1,700 kg, Technical data Manufacturer: Weiler Model: DA 210 AC x 1500 Year of manufacture: 2013 Swing diameter over bed: 435 mm Swing diameter over cross slide: 245 mm Centre height: 210 mm Centre distance: 1,500 mm Spindle bore: 52 mm Speed range: 20 – 2,500 rpm, stepless Drive power: 10.5 kW Dimensions (approx.): L 2.2 x W 1.0 x H 1.7 m Weight: 1.7 t Equipment • Stepless speed control • HEIDENHAIN digital readout on 3 axes • 3- and 4-jaw chucks, manufacturer Röhm Duro • Multifix toolholder + 10 inserts • Collet chuck Fahrion + approx. 33 collets • Fixed and travelling steady rest • Various live and dead centres + drill chuck • Coolant system • Documentation HEIDENHAIN ND 780 digital position display • 3-axis readout for bed, cross slide, and top slide • Tool memory for 16 tools, with one reference point per axis • Summation key for Z and Zo Isdpfx Ahoykakpj Eetc • Switchable between imperial/metric • X-axis traverse as radius or diameter display • Delta key for "distance-to-go" display to zero • Display resolution up to 1 µm • "Freeze" actual position • Taper calculator All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 1989, centre distance 2000 mm Ijdpfsyi Hvvex Ah Eotc 600 weight of the machine ca. 3,2 t Passage 49 mm Digital Lynette

Condition: ready for operation (used), Year of construction: 1972, Immediately available from university: Boehringer VDF L & Z Lathe Type E 560 Year of manufacture: 1972 Very few operating hours Centre height: 305 mm Swing over bed: 610 mm Turning length: 4,000 mm Swing in gap: 810 mm Swing over cross-slide: 375 mm Spindle bore: 82 mm Spindle speeds: 7 – 1,400 rpm Drive: 12.5 kW Heidenhain digital readout Chuck Ijdpfx Ahjyir Sce Eetc Faceplate Multifix toolholder with many inserts Steadies Weight: 7 t Price: EUR 12,500 plus VAT ex location

Condition: ready for operation (used), Leadscrew & feedscrew lathe GEMA LZ 200 from educational institution - Three-axis digital readout "NEW" - Guides in perfect condition - Center height: 200 mm - Distance between centers: 1000 mm - Spindle bore: 54 mm - Swing over bed: 400 mm - Swing over cross slide: 200 mm - Speed range: 36 – 2200 rpm - Automatic longitudinal / cross feeds - Tailstock MK4 – quill stroke 200 mm - Three-jaw chuck 250 mm - Electric chuck guard - Multifix toolpost with inserts - Coolant system - Work light Itodpfx Ajyh Hrxjh Esc - Chip tray - Machine feet Dimensions: LxWxH 2x1.2x1.6 meters / Weight: 1800 kg Subject to errors and input mistakes.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 80 mm, turning diameter: 400 mm, center height: 220 mm, turning length: 1,500 mm, quill stroke: 230 mm, quill diameter: 90 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 240 mm, bed width: 400 mm, Equipment: rotational speed infinitely variable, Production Lathe MEXPOL TUS 400 – Available from Stock The MEXPOL TUS 400 is a high-performance production lathe ideal for precise and efficient machining tasks. With its robust construction, powerful main drive, and comprehensive standard equipment, this machine is perfectly suited for continuous industrial operation. Technical Specifications • Center height: 220 mm • Swing diameter over bed: 400 mm • Swing diameter over cross slide: 240 mm • Distance between centers: 1,500 mm • Bed width: 400 mm • Spindle bore: 80 mm • Spindle mount: DIN 55027 / 8 • Main drive: 11 kW with frequency inverter • Speed range: 25 – 2,000 rpm (3 gear stages) • Maximum spindle torque: 1,200 Nm • Max. workpiece weight: o Between centers: 150 kg o In chuck with tailstock: 600 kg o With steady rest: up to 1,300 kg • Accuracy according to DIN 8606 • Electrical equipment: 400 V / 50 Hz • Noise level: max. 84 dB(A) Feeds and Thread Cutting • Longitudinal feed: 0.04 – 12 mm/rev • Cross feed: 0.02 – 6 mm/rev • Rapid traverse longitudinal / cross: 3,800 / 1,900 mm/min • Metric, imperial, module, and DP threads without change gears Slides • Cross slide travel: 315 mm Iedpfxoyhzgqs Ah Eetc • Top slide travel: 130 mm Tailstock • Quill diameter: 90 mm • Quill taper: Morse taper MT 5 • Quill stroke: 230 mm Weight • Machine weight: approx. 2,500 kg Standard Equipment (excerpt) • Frequency-controlled main drive • Multifix quick-change tool post, size C • Central lubrication for carriage, headstock, and feed gearbox • Coolant system • Safety chuck guard with interlock • Travelling chip guard and rear chip wall • CE marking and declaration of conformity • Machine color: RAL 7035 / RAL 7011 Options • FAGOR INNOVA 30iT digital readout

Condition: used, Year of construction: 1960, spindle travel 3000 mm spindle stroke - max. 330 mm Iodpfx Aeyhrcfoh Estc 2820

Condition: new, Year of construction: 2022, The technique is intended for concentration, calming the mind, and decision-making. Dimensions: Height 2.8 m, Diameter 1.6 m Made in Lithuania, "MITRONAS Engineering" Iedpfx Ahjyhahie Eotc

Condition: good (used), 1 x lathe from Hamburg 430 --- 1 x lathe from WEIPERT 425 --- 1 x lathe from VDF Iodpfeyg N E Iox Ah Eotc

Condition: excellent (used), - Maximum turning diameter over bed: 500 mm. - Maximum turning diameter over gap/bridge: 580 mm. - Turning length between centers: 1500 mm. - Spindle bore: 71 mm. Ijdpjygy Dusfx Ah Ejtc - Spindle speed range: 14–1800 rpm (22 speed steps). - Main motor power: 11 kW. - Machine weight: approx. 3,000 kg. - Equipped with rapid feeds (0.55 kW motor) - Tailstock with Morse taper 5.

Condition: ready for operation (used), Year of construction: 1967, Swing over bed: 800mm Swing over support: 450mm Turning length: 2800mm Workpiece weight: 5000kg Itodpfx Ahsyghpre Ejc

Condition: used, Year of construction: 1988, functionality: fully functional, 1 Lead and Screw-Cutting Lathe Manufacturer: Stanko Model: 1M-63b Year of manufacture: 1988 Swing diameter over bed: 700 mm Swing diameter over carriage: 350 mm Turning length: 3000 mm Itedpfoyf Dyqex Ah Eec Centre height measured in bed: 320 mm Spindle bore: 70 mm Spindle speed max.: 10 - 1250 rpm / 24 steps Cross feed: 0.0256 ... 0.378 mm/rev Longitudinal feeds: 0.064...1.025 mm/rev Tailstock quill travel: 240 mm Tailstock taper: MT5 Total power requirement: 14.0 kW Machine weight approx.: 5.0 t Machine dimensions approx. (LxWxH): 5.1 x 1.8 x 1.6 m Travels of carriage: Longitudinal travel = 3000 mm Cross travel = 400 mm Tool post travel = 220 mm Coolant system with pump Accessories: 2 steady rests 3-jaw chuck

Condition: ready for operation (used), Lead and feed screw lathe Manufacturer: VDF Model: MA22 Max. turning length: approx. 1000 mm Centre height: approx. 150 mm Spindle bore diameter: 60 mm With 3-jaw chuck, manufacturer FORKARDT, diameter: 200 mm Coolant system and Multifix quick-change toolpost Itedpfxsyfnabj Ah Eec

Condition: used, Year of manufacture: 1980s/90s Technical data: Isdpjydk Hhofx Ah Eotc Centre height: 185 mm Centre distance: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock taper: MT 3 Quill stroke: 110 mm Dimensions (W x D x H), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: - 3-jaw chuck, make: Röhm, ø 200 mm - Quick-change tool post with 4 holders - Bed stop - Chip tray

Condition: used, Year of construction: 1992, Voest-Alpine DA210/2 - Universal Lathe Distance between centers: 2000 mm Swing diameter: 420 mm Spindle bore: 52 mm - 3-axis digital readout - 4-jaw chuck Ø 250 mm - Multifix quick-change tool post - Coolant system - Work area lighting - Chip guard rear wall - Year of manufacture: 1992 Optional accessories: - Fixed steady rest (€650 excluding VAT) Technical Data - Center height over flat guideway: 210 mm - Center height from floor: 1090 mm - Bed width: 330 mm Main spindle: - Spindle nose according to DIN 55027: Size 6 - Spindle bore diameter: 52 mm - Front bearing diameter: 83 mm - Internal taper: Metric 57 - Number of speed steps: 12 - Speed range: 33 - 1500 rpm - Max. torque: 900 Nm Tailstock: - Tailstock quill diameter: 65 mm - Morse taper: MT 4 Slide: - Leadscrew pitch: 6 mm - Tool shank cross section (HxW): 20 x 20 mm Working areas: - Swing over bed: 435 mm - Turning diameter over cross slide: 245 mm Itodpsyc Sqrofx Ah Eoc - Cross slide travel: 330 mm - Top slide travel: 130 mm - Tailstock quill travel: 120 mm Permissible workpiece weight: - Between centers: 500 daN - Unsupported in chuck: 150 daN Feeds: - Longitudinal feeds: 0.072 - 4.038 mm/rev - Cross feeds: 0.036 - 2.019 mm/rev - Metric threads: 0.05 - 28 mm - Inch threads: 56 - 1 TPI - Module threads: Mod 0.25 - 14 - D.P. threads: 112 - 2 TPI Electric drive: - Motor power: 5.5 kW - Rated motor speed: 1500 rpm Dimensions: - Machine dimensions (WxHxD): 3250 x 1700 x 1100 mm - Weight: approx. 1500 kg

Condition: ready for operation (used), Year of construction: 2000, spindle bore: 60 mm, center height: 270 mm, center width: 1,500 mm, overall weight: 3,000 kg, fagor 8050 Multifix turret type B Ladner 250MM chuck Capacity 1500X540MM Steady rests Itodeycr Htepfx Ah Ejc

Condition: ready for operation (used), functionality: fully functional, Centre distance: 750 mm Swing over bed: 430 mm Spindle bore: 42 mm 24 speeds: 14 – 1400 rpm Drive power: 5.5 HP Weight approx.: 2 t Accessories: steadies, Multifix, Forkardt chuck Condition: The machine runs well; the longitudinal guide is no longer in good condition. The machine is low-priced and only suitable for simple tasks. Iodeycrwfspfx Ah Estc

Condition: good (used), Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Strunguri Arad, lead screw and feed screw lathe type SNA560x2000 -Turning length: 2140 mm -Turning diameter over bed: 600 mm -Turning diameter over support: 330 mm -Spindle bore: Ø 65 mm -Spindle speeds: 16 - 1600 rpm -Three-jaw chuck: Ø 310 mm Itedpfsyaypkox Ah Esc -Tailstock mount: MK5 -Drive motor: 11 kW -Accessories included, see photos -Dimensions: 3700/1050/H1400 mm -Weight: 3600 kg

Condition: refurbished (used), functionality: fully functional, Lathe Brand: ERNAULT Model: CHOLET 550 Distance between centers: 1000 mm Center height: 250 mm Max. diameter over bed in front of faceplate: 550 mm Max. diameter over bed: 500 mm Isdpfoyapkwex Ah Eotc Max. swing in gap: 710 mm Spindle bore: 52 mm Morse taper: No. 5 Max. cross slide travel: 350 mm Power: 11 hp

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2581 Year of manufacture: 1984 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle speeds via 12-step gearbox - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of chuck jaws) - Multifix quick-change tool post, size B, with 3 tool holders - Automatic longitudinal and cross feed Ijdpfx Aoyah Rvoh Eetc - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg In very good condition

Condition: good (used), Year of construction: 1988, From business liquidation Kern D20A Year of manufacture 1988 Centre distance 1000 mm Spindle bore 45 mm Turning diameter 420 mm 2-axis digital readout by Heidenhain Speed range from 31.5-1400 rpm Rota-S-Plus three-jaw chuck with various interchangeable jaws Multifix Steady rest Tailstock Work light Coolant pump 2x emergency stop Accessories: Iedpfx Aheyag H Ao Estc 5x Multifix Gr.B Live centre + fixed centre + drill chuck Faceplates Machine feet Spare jaws for chuck 380 Volt Weight 1950 kg Dimensions approx. 2500x1200x1950 mm (LxWxH)

Condition: used, Year of construction: 1970, digital readout ja Iodpfx Ajyacnpjh Eotc weight 4,4 t rapid traverse ja m/min