Graphotrade

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press, year of construction 2006. multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm Lholhceyalqyocqleb E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Working hours 9000 Year of production 2006 more information on request If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2017, Technical data: Number of printing units: 8 Maximum printing width: 1270 mm Maximum web width: 1320 mm Minimum web width: 300–570 mm (depending on unwind/rewind specification) Minimum repeat length: 360 mm (ARUN system: from 380 mm) Maximum repeat length: 800 mm Repeat length adjustment: increments of 0.1 mm; correction ±2% Anilox roller internal diameter: 136.989 mm Anilox roller circumference: 500 mm Sleeve length: 1350 mm Maximum mechanical speed: 500 m/min (or 400 m/min for basic unwind/rewind) Operating printing speed depends on substrate, inks, transfer, plate type, image, screen ruling, anilox volume, etc. Lhslhccqex H Unvoljb Corona treatment unit (Ahlbrandt) Gas drying Non-stop shafted unwind 1000 mm Non-stop shafted rewind 1000 mm Automatic viscosity control (INKSPEC) Additional drying enhancements (ECLIPSE gas burners) Infeed/outfeed extensions Automatic sleeve change systems Central chiller for temperature stabilization (Hyperchill ICE039) Ionisation system (SIMCO) Side-lay control (Erhardt+Leimer) EFFICIENCY maximum mechanical speed: 500 m/min FALCON – automatic print register and impression setting Advanced print inspection system FAST BLADE – integrated doctor blade quick-change system INKSTORM – automatic wash-up system (optional feature) Bosch Rexroth INDRAMAT direct-drive technology JOB MANAGEMENT – remote job preparation from PC PRINT QUALITY CDTS – central cylinder thermal stabilization system PCTS – thermal stabilization for anilox and plate cylinders PPP – printing plate protection DYNAMIC IMPRESSION – electronic compensation of inking unit impression forces Machine design focused on high print stability with composite graphite sleeve EASY OPERATION Intuitive touch screen Easy access to web path Doctor blade chambers with FASTBLADE quick-change system FASTADAPT – automatic chamber positioning adjustment

Condition: like new (used), Year of construction: 2015, 420 mm 2015 Tools Lhelhjx Hhz Asccqleb 6-color etc.

Condition: good (used), Year of construction: 2007, Gallus EM 510 • Year of manufacture: 2007 • Maximum printing width: 510 mm • Printing units: 3 dual-driven print stations • Application: Self-adhesive label production _____ Printing Equipment • 3 flexographic printing units with dual-drive technology • Plate cylinders (1/8"): 3 × 88, 3 × 92, 3 × 96, 3 × 100, 3 × 108, 3 × 116, 3 × 120, 3 × 140 • Magnetic cylinders (1/8"): 2 × 96, 3 × 100, 3 × 108, 3 × 116, 3 × 120, 4 × 140, 3 × 176, 3 × 184, 2 × 192, 1 × 222 • 13 anilox rollers (various volumes: 4.1; 5.04; 6; 6; 6.3; 6.09; 8; 8.25; 9.58; 13; 13.51; 16.57; 30) • 2 brand new anilox rollers • 3 sleeve systems z=88 for varnishing (including mounting station) • Screen printing unit _____ Die-Cutting & Converting • 3 die-cutting stations • 2 stations equipped with adjustable counter-pressure cylinders (Spilker Variabase) • Laminating station • Waste matrix removal on rail system: o 2 matrix rewinders (upper/lower) • Double-spindle rewinder (roll-to-roll) • Insetter system for pre-printed webs • Register control for 5 stations (3 printing + 2 die-cutting, Sensotec) _____ Drying & Treatment • 3 × Uviterno UV curing systems (240 W/cm) • 2 × Lambda Technology NIR drying modules for water-based inks • Corona treatment 2 kW (SIT) Lelhsx Hacrjccqlshb _____ Web Guiding & Control • E+L web guiding system with: o 2 ultrasonic sensors o 1 line sensor • E+L ELSCAN video inspection system • Web cleaning system • Complete set of anti-adhesive rollers _____

Condition: good (used), Year of construction: 2016, Gallus EM 260 • Max. Printing Width: 250 mm • Complete machine control system retrofit: 2016 • Printing Units: 8 (dual-drive technology) • Application: Production of self-adhesive labels _____ Printing Equipment • 8 × Flexographic printing units • Print cylinders (1/8") – 8 pcs each: z=88, 92, 96, 100, 108, 116, 120, 124, 132 • Additional impression cylinders for thin and thick substrates • 46 anilox rollers for all applications • 4 × Sleeve systems z=88 for varnishing (including mounting station) • 4 × Fully equipped chamber doctor blade systems with peristaltic pumps • Screen printing unit _____ Lhelox Haclohccqlsb Die-Cutting & Converting • 3 × Die-cutting stations • 2 × Die-cutting units equipped with adjustable counter-pressure cylinders (Spilker Variabase system) • Magnetic cylinders (minimum 3 pcs each, 1/8"): z=88, 92, 96, 100, 108, 116, 120, 124, 132 • Rewinding & waste removal systems: o 3 × Matrix rewinders on rail system o Additional matrix rewinder o Double-spindle rewinder (roll-to-roll) • Laminating unit on rail system • Insetter register system for pre-printed webs • BG 74 insert rewinder _____ Drying & Treatment • 8 × UV curing units from Uviterno (240 W/cm) including spare lamps and accessories • Corona treatment unit 1 kW • Integrated cooling and air extraction _____

Condition: used, Year of construction: 2001, Number of printing units: 8 Web width: 1,270 mm Print width: 1,200 mm Print repeat: 300 - 1,000 mm Unwinder type: Double Axis Drop Splice Rewinder type: Turret Fully Automatic Splice Drying: Hot air – electric heaters Video camera: BST Euroscope Web guides: Yes Lolhccsx E Tm Uoqljhb Material: Plastic webs Camber doctor blades number: Yes Ink pumps: 8 Type of ink: Solvent based Transmission: Bull gear Length/Side registers: Motorized remote controlled

Condition: used, Year of construction: 2002, operating hours: 15,700 h, functionality: fully functional, machine/vehicle number: 4200-03092002, working width: 420 mm, roll width: 420 mm, type of input current: three-phase, operating speed: 2,666 mm/s, Used Flexographic printing machine Nilpeter FB 4200 ser N 420-03092002 Year of production-2002 420mm web width 200 meters/min-max speed 8 x flexo printing. stations 8 x UV Dryer ( Gev Manufactured) 8 x hot air dyers 3 x die cutting stations 1 x waste rewinder 1 x unwinder 1 x rewinder BST video control Turn bar Lamination station on last printing station crane for magnetic cylinders stand for mounting printing cylinders Magnetic cylinders-Z-96, 114, 128, 184 Printing roll-86,92,96, 102, 114, 128, 170, 184 Anilox roll -16 pcs 40" unwind with roll loader Lelhccjx Ei Nleqlehb Servo driven closed- loop infeed tension control before printing Automatic gear lubrication system Digital AV servo technology Doctor blades- self adjusting Manual instantaneous reaister control

Condition: good (used), Year of construction: 2006, 8-color web width: 330 mm Corona UV etc. Lholjxzr Erjhccqljb

Condition: good (used), Year of construction: 2006, web width: 330 mm Corona 8-color UV Cold In Production Lhelhcjxzr Dzocqleb etc.

Condition: good (used), Year of construction: 2006, GALLUS EM 410 Lslhccoxzr Awjqlshb Year: 2006 10-color Cold foil etc.

Condition: good (used), Year of construction: 2007, Web width: 410 mm Lolhccqexzrz Tslehb 9-color Corona Die Cutting Coldfoil Unit etc. In Production

Condition: used, Year of construction: 1995, Colors: 8 Gearless: No Fast Sleeve Change: No 4 motor CNC per printing deck: Yes Computer Supervision: Yes Web Width: 1320 mm Print Width: 1300 mm Min. Print Repeat: 380 mm Max. Print Repeat: 1100 mm Mechanical Speed: 350 m/min Working Speed: Up to 300 m/min Unwinding & Winding: Turret, FLYING SPLICE, Max. Reel Diameter 1000 mm Drying: 2 Zones, 4 Fans, 2 Gas Burners Video Camera: Yes Corona Treatment: No Web Guides: FIFE Viscosity Control: Yes Lhjlhcjxzrx Ejcqljb Wash System: Yes, F&K Ceramic Anilox Rollers + Closed Chamber Doctor Blade 1x 80 L/cm, 2x 200 L/cm, 2x 120 L/cm, 4x 200 L/cm, 2x 320 L/cm, 3x 400 L/cm 200 sleeves, repeat between 390 mm and 1090 mm (8 for each repeat: 390, 400, 410, 420, 430, 450, 480, 510, 530, 540, 550, 630, 660, 670, 740, 780, 800, 850, 880, 930, 990, 1030, 1050, 1090 mm + 8 twinlock 740 mm + 8 twinlock 1030 mm) Mandrels for sleeves: 6x360 mm, 6x400 mm, 6x420 mm, 8x460 mm, 8x530 mm, 6x560 mm, 12x620 mm, 8x780 mm, 8x850 mm, 15x990 mm Printing cylinders: 8x380 mm, 8x390 mm, 12x400 mm, 8x410 mm, 8x450 mm, 6x460 mm, 7x470 mm, 4x490 mm, 12x500 mm, 8x510 mm, 12x530 mm, 8x540 twinlock, 6x560 mm, 8x570 mm, 8x580 mm, 8x590 mm, 12x620 mm, 9x640 mm, 12x660 mm, 6x670 mm, 6x730 mm Overall Dimensions: Length = 17 m, Width = 5 m, Height = 6 m Central Drum Diameter: 2280 mm

Condition: used, Year of construction: 2006, Configuration: • Unwinder • Teknek web cleaner • Corona treatment • 6 flexo print stations • 6 × IST UV dryers • Cold foil module Lslhoxzq T Ujccqljhb • Cold foil unwind/rewind • Lamination module • Laminate unwinder • Die-cutting section with 3 stations • EL camera system • Rewinder Tooling included: • Print cylinders + magnetic cylinder + varnish roller: o Sizes: Z87, Z96, Z110, Z132, Z140 o 5 print cylinders of each size o 1 varnish cylinder for print station 6 • 16 anilox rollers Additional information: • End of 2024: full revision of the printing units and related tools completed.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, • Model: SIAT L33 150 TC • Machine in very good condition, completely overhauled in 2022. • Machine type: Semi-automatic, three-color flexographic printing press • Color printing: Up to 3 colors • Web width: 150 mm • Printing width: 150 mm • Suitable for: PVC, OPP, Acrylic OPP, cellophane, paper, and reinforced films • Applications: Primarily for printing on self-adhesive tapes • Central impression drum: Heated, with ceramic drums • Rewind: Automatic rewind turrets with automatic coupling of printed tape to empty cores • Corona treatment: Yes • Slitting: By razor blades • Drying: 3 hot air drying tunnels • Speed control: Up to 160 m/min, adjustable via inverter • Maximum roll diameter (unwind): 360 mm • Maximum roll diameter (rewind): 300 mm Ljlhccqexznwkeljhb • Unwinder shaft diameter: 3 inches

Condition: used, Technical data: Lolhcjxxmz Necqlohb Printing width: 600 mm Colors: 4 Chamber doctor blade units: 3 Application: Inline with bag-making machine Condition: used

Condition: good (used), Year of construction: 2010, Printing & Drying • 8 × flexographic print units • GEW UV lamps installed on all sections • Chilled impression drums (visible in photos) Lelhccqjxxa Rdjlshb _____ Converting & Finishing • Kocher & Beck GapMaster die-cutting system • Delam / Relam unit with compensator • Foiling / combo unit • Matrix section & rewinding path visible in the line _____ Web Handling • Unwinder • Rewinder • Web guide • Tension control • Various rollers and carriers • Touchscreen main control (Siemens panel) • Operator panels at each station _____

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: UZ0611, working width: 1,320 mm, type of input current: three-phase, overall weight: 40,000 kg, total height: 5,300 mm, total length: 12,800 mm, total width: 6,200 mm, compressed air connection: 6 bar, Fully operational 8-color printing machine. Equipped with BST Eltromat visual inspection system, Bosch Rexroth drive system, and Tresu ink pumping system. The machine comes with an up-to-date record of preventive and corrective maintenance, numerous software updates, and traceability for replaced components. Ljlhexwm Hijccqlshb The equipment is sold together with an industrial water chiller and includes the following auxiliaries: Anilox rollers: 100 - 4 pcs, 120 - 3 pcs, 180 - 1 pcs, 220 - 1 pcs, 260 - 1 pcs, 301 - 1 pcs, 340 - 5 pcs Printing sleeves (print repeat): 350 - 8 pcs, 370 - 8 pcs, 390 - 8 pcs, 400 - 8 pcs, 430 - 8 pcs, 450 - 8 pcs, 475 - 8 pcs, 500 - 16 pcs, 525 - 8 pcs, 550 - 8 pcs, 570 - 8 pcs, 600 - 8 pcs, 640 - 8 pcs, 740 - 8 pcs, 860 - 8 pcs

Condition: good (used), Year of construction: 2011, Model: NILPETER MO4 Printing Width: 420 mm Number of Printing Units: 9 total (1 x Flexo + 7 x Offset + 1 x Flexo) Printing Process: Combination – Offset & Flexo Cylinder Gears (Tooth Counts): 200T / 192T / 184T Offset Units: 7 complete units including: – 7 blanket cylinders – 7 plate cylinders Flexo Unit: 1 integrated flexo printing station with cliché cylinder Additional Configuration: 1 lamination station installed after the final unit Gear Sets Included: – 7 blanket cylinders (200T) – 7 plate cylinders (200T) – 1 cliché cylinder (200T) – 7 blanket cylinders (192T) – 5 plate cylinders (192T) – 1 cliché cylinder (192T) – 7 blanket cylinders (184T) – 7 plate cylinders (184T) – 1 cliché cylinder (184T) Magnetic Cylinders: 1 × 184T 1 × 192T 1 × 200T Web Width: up to 420 mm Substrate Range: self-adhesive paper, film, foil Additional Features: UV curing, lamination, sheeting & die-cutting capability Condition: Good, complete with cylinders and accessories Location: Germany Availability: Immediate _____ TOOLING & ACCESSORIES • Full set of offset cylinders and gears (184T / 192T / 200T) • Magnetic cylinders (184T, 192T, 200T) Lelsxv A D Iohccqlohb • Flexo cliché cylinder and lamination station • Complete technical documentation • Additional spare parts and tools available upon request _____ GENERAL CONDITION The press is in very good mechanical and visual condition, complete with all main printing units, gears, magnetic cylinders, and accessories. Ready for demonstration and inspection in Germany.

Condition: ready for operation (used), Year of construction: 2002, Flexoprinting machine CI type Bonardi Mira 1200 6 col. System: Sleeved Printing Width: 1200 mm Web Width: 1250 mm Printing Repeat (Max): 800 mm Printing Repeat (Min): 350 mm Plate-Cylinder Gear-Pitch Module: 5 mm Plate-Thickness, Sticky Back Included: 1,64 mm Drying System: Electrical Lslhcexuwanocqlehb Sleeve changeover central impression press Helical gears, pitch 5 mm Side register capability /- 10 mm Up-down register capability /- 7 mm Mechanical speed 250 m/min Web tension range 30-250 N Flexo inks solvent based and water No 6 pneumatic pumps Printing plate thickness 1,14 mm Sticky back adhesive thickness 0,50 mm Chill roller with OD 290 mm Double unwinder with automatic control tensión Electromagnetic powder brakes Pneumatic loaded dancer with two low inertia air cylinders Two air expandable shafts Reel max diam 700 mm Core diam. 3” Doble rewinder Two motors CA Pneumatic loaded dancer with two low inertia air cylinders Micro switch to stop the press in case the web breaks or reel end Marriage roll pneumatic operated to enable to splice to be carried out at reducer speed with operator intervention PRINTING MANDRELS Nr. 02 sets of Nr. 06 mandrels ANILOX ROLLERS A total package of 10 ceramic coated and laser engraved aniloxes 260,100, 140 l/cm SLEEVE AND REPEAT GEARS Repeat 5 set of printing sleeves 350, 400, 450, 550, 600 BANANA ROLLER 1 Banana at the infeed (before nip on top of the central drum). 1 Banana at the infeed (before rewinder )

Condition: used, Year of construction: 2003, Flexographic label printing machine GALLUS EM 280 • Unwinder Lsljxr Didshccqlehb • EL web guide • Corona treatment • Contact web cleaner • Delam-relam • Turnbar • 8 flexo units • 8 UV dryers • Cold foil unit • 2 Die cutting units • Waste matrix rewinder • Sheeting unit • Camera view system

Condition: good (used), Year of construction: 2013, Manufacturer / Model: ASAHI DEGRAF AFP 912 EH QDLF Type: Flexographic Plate Processor (Exposure – Heating – Drying – Light Finishing) Year of Manufacture: 2013 Location: Germany _____ Technical Data Model: AFP 912 EH QDLF Serial No.: 362.068 Electrics: 400 V 3 PH + N / 230 V 3 PH – 50/60 Hz Power: 9.5 kW Amperage: 15 / 28 A Weight: 720 kg _____ Machine Description • Combined exposure, drying, and light-finishing system for flexographic plates • Suitable for Asahi AFP series plates (solvent and water-wash types) Lolhccqexq A Iisljhb • Top-loading design with UV exposure and integrated heating unit • Touchscreen control panel with process parameter management • Compact all-in-one design for plate exposure, post-exposure, and light finishing • Stainless steel internal structure with advanced temperature control • CE certified – built by Degraf S.p.A., Italy • High-quality UV system for uniform and stable exposure • Machine complete and operational _____ General Condition The unit is in good working condition, complete and well-maintained. It is currently installed in production and can be inspected in operation upon prior appointment. All components and drawers are intact and original. _____

Condition: like new (used), Year of construction: 2015, Manufacturer / Model: GALLUS EM 280 Lslexn S U Hohccqlshb Type: 6-color flexographic printing press with UV curing and converting units Year of Manufacture: 2015 Web Width: n/a Location: Labelpresshop Condition: Used – fully functional, very clean condition _____ Configuration Unit Description / Details 6 × Flexo printing units Equipped with GEW UV curing (6 UV stations) 1 × Turn bar Installed 1 × Die-cutting unit Standard rotary die station 1 × Label shifter Installed 1 × Hot foil unit Can also be used for cold foil 1 × Screen printing unit Installed Unwinder / Rewinder Integrated Web guiding system Installed CE Marking Machine CE-certified UV system 6 × GEW UV dryers

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 181002, working width: 2,300 mm, power of the servo motor: 2,300 W, roll diameter: 500 mm, overall weight: 1,200 kg, Equipment: documentation/manual, Used for printing on cardboard using water-based inks with a polymer plate. Suitable for printing on solid boards (min. 300Q), all types of corrugated boards, die-cut blanks (e.g. die-cut or flat-folded flap boxes), and sheets from other materials such as hardboard, plywood, etc. Technical data: - working width: 2300 mm - print length (cardboard): 1400 mm - printing drum diameter: 500 mm - cardboard thickness: 1.5 to 7 mm - minimum cardboard format: 550 x 550 mm - maximum cardboard format: 1800 x 1400 mm - adjustable output: up to 2500 pcs/h - installed power: 2.3 kW - supply/fuse: 400VAC / 16A - printer weight: approx. 1200 kg - printing polymer (important!): 5 mm Lhslhccexnxmpeqleb

Condition: ready for operation (used), A 4-color central cylinder printing system WDB Systemtechnik is available. Printing units: 4, ink type: UV, max. material width: 650mm, max. printing width: 600mm, printing length range: 300mm–800mm, max. printing speed: 250m/min, material types: PET/OPP/aluminum/laminate/composite materials, material thickness range: 20µm–150µm, max. unwind and rewind roll diameter: 1000mm, operating hours: 28h, printed length: approx. 57000m. System components: unwind and rewind unit, corona, UV dryer, drying channel, IR heater, cooling unit, and supply and exhaust air fan. Including lamination unit. Documentation available. An on-site inspection is possible. Ljlsxmkctehccqlohb

Condition: used, Year of construction: 2008, Technical data: Printing Section - 5 × UV Flexo Printing Units - 5 × UV Dryers - Web Inspection: BST PowerScope 300 – Web Inspection System Unwinder - Max roll diameter: 1250 mm - Heavy-duty construction with pneumatic shaft and web tension control - Integrated splice table and web guiding system Rewinder - Max roll diameter: 1250 mm (≈ 40 inch) Cold Foil / Lamination Module - Enables in-line application of cold foil or over-lamination for premium label finishes (metallic, protective film, etc.) Turnbar (Web Inversion Unit) - Allows reverse-side printing or lamination — flexible for multi-layer label applications Remailing Section - 24” - Supports reprocessing or secondary processing of pre-printed materials Lhsloxlrd Nohccqleb Additional Modules - Ben Bunch 500 - Die-cutting unit EM 510 (for use with magnetic cylinder, adjustable for gap) - Cross Cutting Cylinder (inline sheeting or perforation — precise longitudinal or transverse cutting) - Punching Units (adjustable punching length from 12” to 26”, ideal for perforations, registration holes, or special die-cut shapes in-line)