S.E.M.I.G. d.o.o.

Condition: used, Year of construction: 1999, stroke 650 mm 1417 Iijlhowzyudjcdwved cylinder durchmesser 250mm weight of the machine ca. 3,4 t t

Condition: ready for operation (used), Year of construction: 1985, Functionality: fully functional, total height: 2,876 mm, installation height: 400 mm, total width: 1,730 mm, throat depth: 330 mm, pressing force: 80 t, table width: 1,500 mm, table length: 600 mm, overall weight: 8,000 kg, ram stroke: 200 mm, Used hydraulic single-column press EXNER EEX SBS 80 Year of manufacture: 1985 Pressing force: 800 kN Table size: 1500 x 600 mm Installation height: 400 mm Ram stroke: 200 mm Iislowzh Iljhcdwvsd Throat depth: 330 mm Required space: 1730 x 2876 x 1550 mm

Condition: used, Year of construction: 2008, total height: 5,540 mm, pressing force: 250 t, table width: 1,400 mm, table length: 6,000 mm, overall weight: 61,000 kg, ram stroke: 900 mm, power: 160 kW (217.54 HP), lifting height: 900 mm, worktable length: 6,000 mm, space requirement length: 5,776 mm, space requirement width: 3,440 mm, PRESS DESIGN .. drive system: hydraulic PRESS FORCES .. total force (nominal): 250 to PRESS TABLE .. table surface (left-right): 6000 mm .. table surface (front-back): 1400 mm .. height above floor level: 870 mm .. number of T-slots: 28 .. distance between T-slots: 22 mm SLIDE .. slide force: 250 to Iolhcdwswy U Ddovsid .. table surface (left-right): 6000 mm .. table surface (front-back): 1400 mm .. stroke: 900 mm SLIDE (HYDR. PRESS) .. approximation velocity max.: 600 mm/s .. working velocity min.: 54 mm/s .. return velocity max.: 600 mm/s .. return force: 20 to ELECTRICAL SPECIFICATIONS .. total power consumption: 160 kW .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 5776 mm .. space requirements -front/back-: 3440 mm .. total height: 5540 mm .. total weight approx.: 61000 kg

Condition: ready for operation (used), Year of construction: 1983, machine/vehicle number: 1886, installation height: 450 mm, pressing force: 60 t, table width: 600 mm, table length: 500 mm, table height above floor: 800 mm, overall weight: 4,000 kg, ram stroke: 300 mm, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, safety light barrier, General Information: For sale is a used production press, including decoiler, straightening machine, and shear, which is in technically functional condition despite its age. The machine exhibits usage and wear consistent with its years of service. Operating manual and schematics are available. EXNER double-column production presses are reliable and safe to operate. Decades of experience in hydraulic press manufacturing form the basis for the quality of our presses. Ergonomic considerations have been taken into account in the design. The oversized, torsion-resistant press frame ensures minimal deflection and long service life. The hydraulic system, constructed according to the latest modular block technology, provides smooth and rapid switching. The oil capacity is designed to keep oil heating to a minimum, allowing oil cooling to be largely omitted. DOUBLE-COLUMN PRESS Standard features of the double-column presses include: - Mechanical stop (up to EXSB80) with scale handwheel for stop adjustment - Oil level indicator with temperature monitoring - Main press force infinitely adjustable via manometer - Ram stroke infinitely adjustable and divisible into: rapid approach, working stroke, return stroke - Mechanical ejector in the center of the press ram Electrical Equipment: - Tip switch up/down for press ram - Impulse piece counter - Adjustable light curtain - Single stroke, double stroke, safety continuous stroke Design modifications reserved. Technical Data: EXNER EX60SBS Overrun distance: 38 mm Overrun time: 90 ms Oil filling: 500 l Weight: 4000 kg Year of construction: 1983 Press force kN: 600 Press force Mp: 60 Ram rapid approach N mm/sec: 310 Ram rapid approach S mm/sec: 480 Ram under load N mm/sec: 13 Ram under load S mm/sec: 20 Ram up N mm/sec: 310 Ram up S mm/sec: 480 Clearance between uprights front mm/min: 600 Installation height mm: 450 Ram stroke mm: 300 Table size (width mm): 600 Table size (depth mm): 500 Table opening diameter mm: 85 Table height above floor mm: 800 Machine height mm: 3,200 Drive power kW: 11 Light curtain mm: 450 Condition: Ijlowycbkehcdwvoid • Used, but fully operational • Age-related signs of use and wear • Maintenance and inspections have been carried out Inspection & Shipping: • Inspection by appointment • Collection by buyer – loading by arrangement Note: Sale is as-is, with no warranty or guarantee. Pickup only. Subject to prior sale and errors excepted.

Condition: good (used), Year of construction: 1990, total height: 7,200 mm, total width: 4,200 mm, total length: 14,500 mm, throat depth: 700 mm, pressing force: 3,000 t, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm Iolhcdjwxxlvowvsid

Condition: good (used), Year of construction: 1990, Pressure: 1200 t Stroke height: 800 mm Ijlowxxkxohcdwvoid Table size: 1600 x 4000 mm

Condition: used, Year of construction: 1952, Type of machine: Down-stroking press Manufacturer: SACK&KIESSELBACH Model: EP500 Year of construction: Iijljwxw H Eshcdwved 1952 Pressing force: 500 t Clear gap: 450 mm Location: In Germany

Condition: good (used), Year of construction: 1971, pressing force: 630 t, Manufacturer: Sack & Kiesselbach Model: EP 630 Mode of operation: oil-hydraulic Table height: 1175 mm Stroke: 305 mm Tool installation height: 317 mm Rapid approach descending speed: 6.9 mm/s Pressing speed: 0.3 mm/s Iolhcdowxw Amswvsid Return speed: 6.3 mm/s Drive power: 11 kW Electrics: 550 V / 60 Hz Information without guarantee.

Condition: used, Year of construction: 1970, pressure 1000 t distance between columns 5000 mm stroke 500 mm Height of centres 400 mm Iielswwl R Aehcdwvjd Overall size 6000 x 2500 mm Weight 1000 kg Distance between centres 3500 mm weight of the machine ca. 220 t

Condition: used, Hydraulic Frame Press • Manufacturer: Dieffenbacher • Type plate missing • Estimated press force: approx. 5,000 kN • Table dimensions: approx. 1,000 x 1,000 mm Iielhcdjwviv Tswved • Approx. 35 years old • Operating hours (read): 2,824

Condition: used, Year of construction: 2013, Oil-Hydraulic Frame Press, manufacturer: Lauffer, type: RA500, S/N: 19828, year: 2013: • Max. press force: 5,000 kN • Max. stroke: 600 mm • Closing speed: 500 mm/s, max. pressing speed: 5 mm/s • Max. working pressure: 255 MPa • Max. tool dimensions: 900 x 900 x 800 mm • Max. tool weight: 2,000 kg • Machine weight: 35,000 kg Ioljwvigxshcdwveid

Condition: excellent (used), Year of construction: 1972, Functionality: fully functional, press force: max. 1.250 to. daylight: max. 480 mm width: 585 mm Iiolhewuutbjcdwvjd stroke: max. 355 mm weight: 7.200 Kg.

Condition: excellent (used), Year of construction: 1970, Functionality: fully functional, Press force: max. 630 to. Tool installation space: 450 x 520 mm Tool installation hight: max. 600 mm Stroke: max. 275 mm Power consuption: max. 5,5 kW Iiolhcjwun E Dodwved

Condition: used, Year of construction: 1991, pressure 30 t distance between columns 1200 mm stroke 500 mm table surface area 1200x1000 mm ram surface 600x400 mm table height 850 mm tool hole in ram Ø 40 mm Islhjwt Durocdwvjid weight of the machine ca. 4 t dimensions of the machine ca. BxTxH 2400x2200x3400 mm

Condition: new, Year of construction: 2025, Technical Specifications: Hydraulic Dished Head Press (Manipulator System) machines are used for the production of dished heads for cylinders. The hydraulic system, which forms the functional core of the dishing unit, performs the main functions of the press and precisely controls manipulator movements. Developed as a result of R&D efforts, this system ensures a highly responsive and trouble-free production process. In the table below this article of CRONOSS Machinery, you can find information such as "pressing force, press distance, maximum pressure, cylinder diameter, motor power, dimensions, and weight" for the respective models, allowing you to determine which machine meets your requirements. With these technical details, such as pressing force and distance between columns, you can select the appropriate machine for the metal plate you will use, in line with your production scale. Model Pressing Force Press Distance Max. Pressure Cylinder Diameter Stroke Motor Power Dimensions (L-W-H) Weight ton mm bar Ømm mm kW mm mm KG BISON P3012 150 3500 230 280+80X2 500 30+5.5 5000-7600-4000 13500 BISON P5012 150 5000 230 280+80X2 500 30+5.5 6200-9000-4000 15000 BISON P3016 200 3500 250 330+80X2 600 37+5.5 5000-7800-4200 15500 BISON P5016 200 5000 250 330+80X2 600 37+5.5 6200-9200-4200 17000 BISON P3020 250 3500 230 360+100X2 600 37+7.5 5000-8000-4300 19000 Islhcjwtxgcsdwvoid BISON P5020 250 5000 230 360+100X2 600 37+7.5 6200-9400-4300 23000 BISON P3025 300 3500 220 420+100X2 800 45+7.5 5000-8000-4500 21000 BISON P5025 300 5000 220 420+100X2 800 45+7.5 6200-9400-4500 25000 BISON P3030 400 3500 250 420+120X2 800 55+7.5 5000-8000-4500 26000 BISON P5030 400 5000 250 420+120X2 800 55+7.5 6200-9400-4500 32000 BISON P5040 500 5000 220 500+140X2 1000 55+11 6200-9500-5000 38000 BISON P5050 600 5000 250 530+140x2 1000 75+15 6200-9500-5000 44000

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, pressing force: 700 t, overall weight: 50,000 kg, ram stroke: 150 mm, Equipment: documentation/manual, Press used for composites, until now it worked in Belgium. In July 2015 the press underwent a thorough modernization, the year of production of the device is 1990, however the modernization was very extensive. The press was used very little, it worked in a research institute. Due to the power cut, I could not check the mileage, but the device looks like new, there are no signs of wear of the working elements. The press is currently in Poland, 63-300 Pleszew, Poland. Pressure 700T. Dimensions of the upper foot 180x240. Foot stroke approx. 150cm. The press was used to develop the famous carbon space frame AUDI R8, it worked in a research and development institute near Brussels. Sometimes this device was also used for commercial production. The press looks practically like new. I have full modernization and technical documentation. Iolhswtbc Tscdwvjid The device was dismantled by me, in the sale price I add free assembly at the customer's, I will restore the device to the condition it was in before I dismantled the press. The buyer must provide a large forklift (approx. 44T), compressed air, and accommodation for 3 people for 14 days. I offer and pay for a team to assemble the device on site throughout Europe. It is very likely that the device will have to be configured for operation at the new buyer's, this task can be performed for an additional fee by a company from the Netherlands, which carried out a thorough modernization of the device in 2015, the estimated cost of such an operation depends on the buyer's requirements. The transport costs will be very attractive, because I have a friendly company that has very attractive delivery terms for me. The weight of the entire device is approximately 50T.

Condition: used, Year of construction: 1989, Functionality: unexamined, machine/vehicle number: 10131, Manufacturer: Maschinenfabrik Exner GmbH & Co. KG Type: EEX 300 SB-ZR Machine No.: 10131 Year of manufacture: 1989 Pressing force: 3,000 kN (300 t) Drive power: 80 kW Overrun distance: 36 mm Iielhcdwswr Um Asvsd Overrun time: 103 ms Hydraulic oil capacity: approx. 2,400 liters Total weight: approx. 47 tons Condition: Untested Location: 59227, Ahlen

Condition: used, Year of construction: 2012, total height: 6,370 mm, pressing force: 315 t, table width: 1,600 mm, table length: 3,000 mm, overall weight: 39,600 kg, ram stroke: 850 mm, lifting height: 850 mm, worktable length: 3,000 mm, space requirement length: 6,238 mm, space requirement width: 5,223 mm, PRESS DESIGN .. drive system: hydraulic PRESS FORCES .. total force (nominal): 315 to PRESS TABLE .. table surface (left-right): 3000 mm .. table surface (front-back): 1600 mm .. number of T-slots: 10 .. distance between T-slots: 22 mm SLIDE .. slide force: 315 to .. table surface (left-right): 3000 mm .. table surface (front-back): 1600 mm .. stroke: 850 mm SLIDE (HYDR. PRESS) .. working velocity max.: 800 mm/s .. return force: 25 to SLIDE EJECTOR / CUSHION .. nominal force: 315 to .. stroke: 900 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz Iiolhcdwjwq S Iboved DIMENSIONS / WEIGHTS .. space requirements -left/right-: 6238 mm .. space requirements -front/back-: 5223 mm .. total height: 6370 mm .. total weight approx.: 39600 kg

Condition: good (used), AGEO SP 60/1000 Four-column press -CE marking -Year of manufacture 1998 -Press force 60 tons -Four guide columns -Hydraulic return stroke -Light gap between columns 1000 mm -T-slot table 900x700 mm -Height clearance 415 mm Dimensions: LxWxH 1.8x1.6x2.5 meters / weight 3.5 tons Subject to errors / input mistakes Iolewqx Eaohcdwvsid

Condition: excellent (used), pressing force: 2,000 t, overall weight: 144,500 kg, 2000 tons press hydraulic (isothermal) Nominal force : 2000 tons, Traverse stroke : 1400 mm, Shut height of stamp distance : 2400 mm, Moving table size : 2000 x 1650 mm, Moving table stroke : 1500 mm, Table height above floor : 0 mm, Ejector force: – Working stroke (up) : 315 tons, – Return stroke (down) : 160 tons, Side ejector force : 20 tons, Press dimensions: – Overall height : 11750 mm, – Right to left : 7000 mm, – Front to back : 5750 mm, Press height above floor : 7900 mm, Press weight : 144,5 tons. The press has an extendable table. The press is connected -Moulding of thermosetting materials in closed, open and injection moulds with complex cycles: heating and cooling, pressure build-up and release, holding under load and ejection of the finished product; -Isothermal stamping of heated workpieces with maintaining a constant temperature of the die tooling and workpiece; -Forming of powder materials, manufacturing of large-sized products from plastic masses and composite in closed heated moulds. Ijlhjwqqp Rscdwvjid -Operations of extrusion of aluminium and its alloys, thermoplastic materials, etc.; -Sheet stamping and sheet forming processes; This press was used for forming large-sized titanium products. 15/07/2025

Condition: excellent (used), Functionality: fully functional, pressing force: 2,000 t, overall weight: 144,500 kg, 2000 tons press hydraulic (isothermal) Nominal force : 2000 tons, Traverse stroke : 1400 mm, Shut height of stamp distance : 2400 mm, Moving table size : 2000 x 1650 mm, Moving table stroke : 1500 mm, Iijlhcdewqpv Nswvod Table height above floor : 0 mm, Ejector force: – Working stroke (up) : 315 tons, – Return stroke (down) : 160 tons, Side ejector force : 20 tons, Press dimensions: – Overall height : 11750 mm, – Right to left : 7000 mm, – Front to back : 5750 mm, Press height above floor : 7900 mm, Press weight : 144,5 tons. The press has an extendable table. The press is connected -Moulding of thermosetting materials in closed, open and injection moulds with complex cycles: heating and cooling, pressure build-up and release, holding under load and ejection of the finished product; -Isothermal stamping of heated workpieces with maintaining a constant temperature of the die tooling and workpiece; -Forming of powder materials, manufacturing of large-sized products from plastic masses and composite in closed heated moulds. -Operations of extrusion of aluminium and its alloys, thermoplastic materials, etc.; -Sheet stamping and sheet forming processes; This press was used for forming large-sized titanium products. 15/07/2025

Condition: used, Year of construction: 2025, Functionality: fully functional, machine/vehicle number: MV-300E/NC, total height: 3,500 mm, total width: 1,800 mm, total length: 2,300 mm, pressing force: 300 t, table width: 1,250 mm, table length: 1,250 mm, overall weight: 18,000 kg, pressure: 320 bar, Equipment: documentation/manual, safety light barrier, The MV-300E/NC four-column hydraulic press belongs to the M/NC series and is custom-designed to achieve greater precision and capacity, specifically manufactured for deep drawing, punching, and deburring tasks. Power tn 300 Motor Power kW 18 Piston Stroke mm 750 Approach Speed mm/s 110 Variable Working Speed mm/s 5-15 Return Speed mm/s 130 Guide Diameter mm 150 Maximum Pressure Bar 320 Table Usable Area mm 1.250 x 1.250 Between Columns mm 1.250 x 940 Vertical Clearance mm 1.000 Total Frontal mm 2.300 Total Lateral mm 1.800 Total Height mm 3.500 Weight kg 18.000 STRUCTURE AND TABLES Consists of three electrowelded blocks made exclusively of S355JR steel. Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. Calculated and designed using finite element software. Ielhcewphhnedwvoid The bottom table has a 50 Tn hydraulic cushion with a useful surface of 950 x 750 mm and three front consoles to support the die outside the press.Incorporates a SIEMENS KP-700 COMFORT NC for the regulation of the top table stroke, speed changes, and cushion regulation. CYLINDER AND HYDRAULIC GROUP 2 single-acting cylinders with lapped sleeves, chromed pistons, and maintenance-free anti-wear guides. 2 auxiliary double-acting cylinders for fast approach and return speeds. Variable speed motorized hydraulic group. Includes cylinder decompression valve. Silent hydraulic pump. All hydraulic presses of the M series include a pressure switch located on the side, allowing the most suitable pressure setting for each type of work to be regulated. Glycerin manometer with reading in tons. ELECTRICAL INSTALLATION AND SAFETY Incorporates a Siemens SIMATIC S7 1200 safety PLC and a 7” KTP-700 COMFORT touch screen located on the electrical panel. Allows programming of semi-automatic and automatic modes, power, stroke, and dwell time of the top cylinder and cushion. It has a storage capacity of 300 recipes, each recipe can program all the above values. Prepared for Industry 4.0. The electrical panel includes a selector that allows choosing the type of work to be performed in manual, semi-automatic, or automatic mode and a selector to choose operation in fast or slow speed. Electrical and hydraulic maneuvers are redundant and self-controlled. They incorporate an additional safety block and self-control devices for maneuvering and safety. Includes verification and certification of correct operation and safety distance for photocells. Operation is carried out by low voltage electric pedal. For safety, they incorporate category IV photoelectric barriers located in the front working area, two fixed side guards, and a practicable guard with a magnetic disconnection detector located at the rear.

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: FDM-150-3000E, total height: 3,100 mm, total width: 800 mm, total length: 3,100 mm, pressing force: 150 t, operating speed: 7 mm/s, overall weight: 10,000 kg, reverse speed: 9 mm/s, working height: 600 mm, clearance between the columns: 1,250 mm, pressure: 295 bar, Equipment: documentation/manual, safety light barrier, HYDRAULIC PRESS FOR FOLDING. The double-column hydraulic press FDM-150E/3.000 belongs to the F series and is specially designed for folding operations. It utilizes an optimized hydraulic system with a pressure of 295 Bar, ensuring prolonged durability and reliability. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Features a rigid fixed bench welded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Includes upper and lower machined tables made from C45E steel with DIN-650 grooves. The upper table ensures perfect alignment with four cylindrical side guides of 80 mm diameter, equipped with maintenance-free anti-friction bimetallic bushings. • Lower grooved table measuring 3.100 mm x 600 mm. CYLINDER AND HYDRAULIC GROUP • Two double-acting main cylinders with chromed pistons and maintenance-free anti-wear guides. • Single-speed motorized hydraulic group. Includes cylinder decompression valve. • Glycerin manometer with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS mod. SIMATIC S7 1200 safety PLC and a 7” HMI touchscreen mod. KTP-700 CONFORT located in the electrical panel. Allows programming of operating modes in semi-automatic and automatic, power, stroke, and holding time. It has storage capacity for 300 recipes, where all the previous values can be programmed. • Operation is performed via a low-voltage electric pedal. • To ensure safety, it includes category IV photoelectric barriers located in the front work area, two fixed side guards, and a practicable rear guard with a magnetic disconnection detector. TECHNICAL SPECIFICATIONS Power tn 150 Engine Power cv 11 Piston Stroke mm 250 Working Speed mm/s 7 Iijlhcewpg D Uodwvjd Return Speed mm/s 9 Maximum Pressure Bar 295 Front Light mm 3.200 Side Light mm 500 Useful Vertical Light (Free Distance Between Tables) mm 550 Working Height mm 950 Total Front mm 2.750 Total Side mm 800 Total Height mm 3.100 Weight kg 10.000

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: FDL-150-100E/NC, total length: 1,200 mm, pressing force: 150 t, table width: 800 mm, operating speed: 30 mm/s, working height: 600 mm, clearance between the columns: 1,250 mm, Equipment: documentation/manual, safety light barrier, DOUBLE-COLUMN HYDRAULIC PRESS WITH TWO SIDE CYLINDERS FOR PRE-PRESSING AND PRESSING OF ROTORS AND STATORS, AND A CENTRAL CYLINDER FOR ROTOR SHAFT EXTRACTION, AS WELL AS FOR SHAFT EXTRACTION IN CASE OF REPAIR It features an extendable table for stacking and handling rtors and stators. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Consists of a rigid fixed bench welded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Mechanically movable grooved table measuring 1200 x 800 mm with a stroke of 1,200 mm, equipped with a worm gear reducer and a 0.5 HP electric motor with brake. • Central drill on the table with a diameter of 250 mm and a maximum depth of 550 mm. • Useful lifting capacity of the table for moving 4 tons. • Movement speed of 30 mm/sec. • Front interior width of 1250 mm (space between columns). • Working height of 600 mm. MAIN CYLINDERS: 150 TN • Two 75-ton hydraulic cylinders (150 tons total), with a stroke of 1200 mm connected by a plate with a central hole of 250 mm in diameter. • Maximum useful height of the cylinder plate: 1,440 mm. • Minimum useful height of the cylinder plate: 200 mm. ABSTRACTION CYLINDER • One 100-ton central cylinder with a stroke of 1200 mm. • Designed to accommodate an abstraction clamp, end of the rod threaded to M 35.150 x 40 mm length. • Maximum useful height of the abstraction cylinder: 1600 mm from the root of the rod thread. • Minimum useful height of the abstraction cylinder: 400 mm from the root of the rod thread. HYDRAULIC GROUP • Two-speed hydraulic group with 5.5 HP power “Siemens Motor”, with automatic disconnection of high speed and independent speeds. Maximum pressure: 250 bar. • Pressure regulation system using proportional valves. • Air-oil cooler. • Temperature sensor. • Hydraulic group located on the right side. ELECTRICAL INSTALLATION AND SAFETY • Equipped with a SIEMENS mod. SIMATIC S7 1200 safety PLC and a 12” HMI touchscreen mod. MTP with 99 memory slots allowing adjustment of pre-pressing power, pressing, calendering, and stroke of the pressing and extraction cylinders, as well as the holding times during processes. Iielhcdwowpg Awovjd • Electrical and hydraulic maneuvers are redundant and self-controlled. They include an additional safety block and self-control devices for operation and safety. Includes verification and certification of correct operation and safety distance for photoelectric cells. • The electrical panel includes a selector for choosing the type of work in manual, semi-automatic, or automatic position and a selector for high-speed or low-speed operation. • Operation is performed via a two-hand low-voltage electrical pushbutton. • All installed electrical materials are Siemens, including relays, contactors, main motor, etc. • Ready for Industry 4.0. • To ensure safety, it includes category IV photoelectric barriers located in the front work area, two fixed side guards, and a practicable rear guard with a magnetic disconnection detector.

Condition: used, Year of construction: 2024, Functionality: fully functional, total height: 3,320 mm, total width: 1,300 mm, total length: 2,300 mm, pressing force: 2,000 t, overall weight: 50,000 kg, reverse speed: 28 mm/s, working height: 2,050 mm, pressure: 250 bar, pressing speed: 9 mm/s, Equipment: safety light barrier, SEGMENTED RIGID ARCH HYDRAULIC PRESS FOR MEDIUM COMPLEXITY ELASTOFORMING TASKS The RV-2000E/NC rigid arch hydraulic press belongs to the R/NC series and is custom-designed for elastomer-forming tasks on medium-complexity parts. It features an electro-welded structure made exclusively from S355JR steel. The structure is stabilized and machined at the end of the structural welding process to ensure perfect parallelism and precision, designed using finite element software. It uses an optimized hydraulic system with a pressure of 250 Bar, ensuring prolonged durability and reliability. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Rigid arch structure segmented, calculated and designed with finite element software and with a structural coefficient of level 5. • Circular lower table with a diameter of 550 mm, featuring 8 cylindrical guides. • Includes a hydraulic-driven removable plate for piece feeding and retrieval. CYLINDER AND HYDRAULIC GROUP • Main single-acting cylinder with an upward drive, equipped with a pre-filling valve and four auxiliary cylinders for the fast advance and return of the table. • 15 kW hydraulic group with a variable flow pump and constant power, enabling a complete cycle every 2 minutes. • Glycerin manometer with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY • Electrical cabinet includes a Siemens S7200 PLC with PROFINET configuration. Programming via KT-700 display. • Electrical and hydraulic operations are redundant and self-monitored. • Includes an additional safety block and self-monitoring devices for operation and safety. • Verification and certification of proper operation and safety distance for photoelectric cells. • Operation is performed via a low-voltage electric pedal. • For safety, it includes level IV photoelectric barriers located at the front and rear. TECHNICAL SPECIFICATIONS MODEL RV-2000E/NC Power tn 2.000 Engine Power kW 15 Approach Speed mm/s 19 Working Speed mm/s 0.65 Return Speed mm/s 28 Maximum Pressure Bar 250 Islhcdswpgypewvjid Piston Stroke mm 220 Vertical Light mm 120 Press Cycle Time min 2 Table Dimensions ø mm 550 Working Height mm 2.050 Front mm 2.300 Side mm 1.300 Height mm 3.320 Weight kg 50.000