K+S Rotationstechnik GbR

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 1372, turning length: 350 mm, travel distance X-axis: 150 mm, travel distance Z-axis: 250 mm, total height: 2,300 mm, total length: 4,000 mm, total width: 2,000 mm, overall weight: 3,000 kg, controller manufacturer: MORI SEIKI, controller model: MSC-518, number of slots in tool magazine: 8, MORI SEIKI CL-20 B CNC Lathe - Operating voltage: 400 V Frequency: 50 Hz Rated current: 55 A The machine is equipped with an 8-position tool turret and a three-jaw chuck, diameter: 250 mm. Note: The item must be collected, bindingly, between July 7th and 9th, 2026, on a specific date to be agreed upon. Hjdpsy Dcnlsfx Afhenk FCA D-71263 Weil der Stadt – loaded onto truck

Condition: excellent (used), Year of construction: 2013, Control Siemens Sinumerik 840D Max. turning diameter: 280 mm Max. bar capacity main spindle: 61 mm Turning length: 490 mm Spindle speed main/sub spindle: 4700 / 6000 rpm 12-position turret with driven tools C-axis Hnsdpfx Afsy Aympohsk Y-axis Parts catcher Workpiece ejector Chip conveyor Various tool holders

Condition: good (used), Year of construction: 2006, Parts shown by hand not come with machine. Hodsyzyhqjpfx Afhsnk

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning length: 225 mm, turning diameter: 260 mm, travel distance X-axis: 170 mm, travel distance Z-axis: 335 mm, rapid traverse X-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, rotational speed (max.): 5,000 rpm, quill diameter: 60 mm, quill stroke: 80 mm, ATTENTION: A total of 3 machines available. There are 2 additional identical machines with the same equipment (chip conveyor, etc.). EQUIPMENT - Chip conveyor for side mounting and chip bin - Short bar loader magazine - Interface for bar feeder device - Workpiece catch tray (parts catcher) - Chuck confirmation switch (open/close) - C-axis indexing - Driven tools - Programmable tailstock Hnodpfx Afeyzggmshek - Linear guides - Manuals Control: Fanuc 0i-TD Control power-on hours: 30,811 h Machining time: 7,738 h Spindle motor power: 15/7.5 kW Feed motor power X/Z-axis: 3.0/1.8 kW Milling spindle motor power: 3.7/2.2 kW Max. turning diameter: 260 mm Max. turning length: 225 mm Chuck size: 6" Swing diameter over bed: 550 mm X-axis travel: 170 mm Z-axis travel: 335 mm Rapid traverse X/Z-axis: 36 m/min Main spindle Spindle nose (ASA): A2-5 Max. spindle speed: 6,000 rpm Spindle bore diameter: 56 mm Max. bar capacity diameter: 45 mm Turret Number of turret stations: 12 positions Turret indexing time: 0.15 s Tailstock Quill diameter: 60 mm Quill stroke: 80 mm Taper bore/tailstock mounting: MT 4 Milling Spindle Max. spindle speed: 5,000 rpm Bar feeder magazine Model: Fedek Machine Co. DH-65 Bar length min./max.: 280/1,200 mm Bar diameter: 5-65 mm Dimensions Dimensions (L x W x H): approx. 1,620 × 1,200 x 1,400 mm

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Turret, chip conveyor, tool holder accessories Hjdpfx Ajyzb Npofhsnk

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Siemens control, turret, tailstock, chip conveyor, without loading magazine. Hnedpfxeyzb I Ss Afhok

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 290 mm, turning length: 330 mm, turning diameter: 229 mm, spindle bore: 47 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 138 mm, controller model: Fanuc GE 18i-T, Hardinge Conquest T42 CNC turning center (2000) Controller: GE Fanuc Series 18-T, live tooling, C-axis option noted, tailstock included, 12-station turret, Spindle bore 47.6 mm, Hnodoyzbivopfx Afhok spindle speed 5,000 rpm, Max turning/machining diameter 229 mm, Max turning length 333 mm, X travel 138 mm, Z travel 350 mm.

Condition: excellent (used), Year of construction: 2011, CNC Lathe with y-axis MAZAK - QTN 250 MY MACH-ID 9483 Make: MAZAK Hedpfsyyxzmox Afhsnk Type: QTN 250 MY Control: Mazatrol Matrix Nexus Year: 2011 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Mori Seiki ZT 1500 YB lathe, year: 2006, including 5 driven tools Hjdpeyyl Itofx Afhsnk

Condition: used, Year of construction: 2018, Lathes Travel distance X: 221 mm Travel distance Y :100 mm Travel distance Z: 400 mm turning length: 380 mm max. circulation diameter: 280 mm Hnjdpfx Afsyx T Hujhsk spindle boring: 65 mm input Power: 11 kW max. turning moment: 80 NM range of revolution from: 100 rpm range of revolutions till: 4500 rpm Control: Fanuc 0i-TF Powered tools: 12 working hours approx: 813 h control Fanuc Scrapper chip conveyor

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 290 mm, turning length: 305 mm, turning diameter: 320 mm, spindle bore: 51 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 330 mm, spindle motor power: 1,500 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,650 mm, total length: 2,500 mm, total width: 1,600 mm, feed length Z-axis: 330 mm, swing diameter over cross slide: 290 mm, turning diameter over bed slide: 510 mm, overall weight: 3,000 kg, bar passage: 51 mm, chuck outer diameter: 210 mm, spindle nose: A2-6, bar diameter (max.): 51 mm, CNC Lathe – Doosan Lynx 220B | Ready for Production | Immediate Availability For sale: Doosan Lynx 220B CNC turning center in good working condition, available immediately. This is a compact and highly reliable CNC lathe, ideal for precision turning, small to medium batch production, and general machining applications. Known for its stability and efficiency, the Lynx 220B is a solid choice for workshops looking for a dependable production machine. Key Specifications: * Turning diameter: 320 mm * Turning length: 305 mm * Swing over bed: 510 mm * Swing over cross slide: 290 mm * Spindle bore: 51 mm * Spindle speed: up to 6000 rpm * Spindle motor power: 15 kW * X-axis travel: 175 mm * Z-axis travel: 330 mm * Turret: 12 stations * Chuck size: 210 mm (8") Hnjdpfx Afeyxtiijhjk * Spindle nose: A2-6 Machine Condition & Details: * Machine is operational and ready for production * Well-suited for daily workshop use * Inspection under power possible * Immediate delivery available * Location: Netherlands Reason for sale: Change of business focus Price: €23,500 (negotiable) Serious inquiries only. For more information, additional pictures, or to arrange a viewing:

Condition: used, Year of construction: 2011, turning diameter 320 mm turning length 600 mm control Fanuc Oi-TD spindle bore diameter 74 mm number of controlled axis 2 turning speed range 3000 U/min Hnjdpfxeyxr Htj Afhek rapid speed 20 m/min number of tapers in turret head 12 direkt tail stock Ja power requirement 15 kW weight 5,0 t dimensions 3,7 x 1,6 x 2,0 m Used CNC- Lahte 2 axis - 3 jaw chuck Ø 250 mm - chip conveyor - oil dust collector - Tool presetter

Condition: used, Year of construction: 2001, turning diameter 280 mm turning length 400 mm control Fanuc 18 T spindle bore diameter 51 mm number of controlled axis 2 turning speed range 0 - 4000 U/min rapid speed 30 m/min number of tapers in turret head 12 VDI 40 tail stock Ja dimensions 3,9 x 1,6 x 2,1 m weight 4,0 t weight of the machine ca. 3,9 t power requirement 15 kW Used CNC- Lahte with box way, 2 axis Hjdjyxr Hgopfx Afhjnk - 3 jaw chuck Ø 200 mm - chip conveyor - oil dust collector

Condition: good (used), Year of construction: 2006, functionality: fully functional, The machine is in good technical condition, testing can be arranged by prior agreement. Hodpfxeyxgb Ee Afhonk

Condition: used, Year of construction: 2017, control MAX5 Distance between centers 588 mm greates pass round over bed 525 mm swing diameter over slide rest 300 mm max. turning diameter 256 mm max. turning length 455 mm max. rod diameter 52 mm x-axis 198 mm z-axis 508 mm spindle tunring speed 4.800 U/min number of tool places 12 Pos. auto power on hours ca. 13.869 h spindle hours ca. 3.935 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Chip conveyor Hedpfoyw Tm Sox Afhjnk - Manual tailstock - Tool turret with driven tools - Chip guard enclosure - Parts catcher - Machine-integrated tool calibration - Three-jaw chuck - Coolant and air gun Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, type of input current: three-phase, We are offering this ready-to-use Okuma LB15 CNC lathe, year of manufacture 1989. Noted defects: The seal on the Plexiglas door should be replaced over time. The machine is still in operation and can therefore be inspected and tested on site. Hnsdpfx Asyw Hnijfhok Manufacturer: Okuma Model: LB15 Year of manufacture: 1989 Mains voltage: 380 V Number of phases: 3 Rated power: 21 kVA Frequency: 50 Hz Total rated current: 36 A Maximum motor current: 28 A Breaking capacity: 7.5 kA Circuit diagram no.: W5000-118-068 Serial number: 5813 If you have any questions or need further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2013, Mori Seiki NLX2500Y/ 700 Year: 2013 Control M730BM Mapps IV Capacity Swing over bed mm 920, with front cover 589 mm Swing over cross slide 742 mm Max. turning diameter 278 mm Standard turning diameter 192 mm Max. turning length 705 mm Bar work capacity 80 mm Through-spindle hole diameter 90 mm Travel X-axis 260 mm Y-axis ±50 mm Z-axis 795 mm Hsdpfx Afeywyncjhenk Tailstocktravel (B-axis) 734 mm Max. spindle speed 4,000 rpm Spindle nose JIS A2-88 Through-spindle hole diameter 91 mm Spindle bearing inner diameter 140 mm Min. spindle indexing increment 0.001° Turret Number of tool stations 20 positions Shank height for square tool 20 mm Shank diameter for boring bar 32 mm Turret indexing time sec. 0.27 Max. rotary tool spindle speed 10,000 rpm Feedrate Rapid traverse rate X, Z: 30,000 mm/min Y: 10,000 mm/min Tailstock: 20,000 mm/min Tailstock: Tailstock travel 734 mm Taper hole of tailstock spindle Live center: MT5 Motor for Spindle 4,000 min-1 kW (HP) 18.5/24.7 (25%ED/50%ED/cont) Rotary tool spindle drive motor 10,000 min-1 kW (HP) 5.5/5.5/3.7 (3 min./5 min./cont) Feed motor X, Y, Z: 3 kW Tailstock: 2 kW Power sources (Standard) Electrical power supply (cont) 33.5 kVA Tank capacity Coolant tank capacity 367 Liter Machine size Machine height 2187 mm Floor space (width × depth) (Including a chip conveyor) 3994×2080 mm Mass of machine 6200 kg Accessories/options: - high pressure paper band filter type, micro filtered, coolant tank - swarf conveor - static holders - 1 driven holder - collet type chuck 3 pieces, different sizes - Kitagawa 3-jaw hydraulic chuck diameter 210 mm - Full set of documentations - Parts catcher Under power in our warehouse. Video available upon request!

Condition: used, Year of construction: 2008, 2-axis CNC lathe MAZAK QTN 100II Hnodpoyvzwvofx Afhok Mazatrol Matrix Kitagawa BB206 chuck Spindle bore 51mm Turning length 310mm Turning diameter 280mm X-190mm Z-330mm Max spindle speed 6000 rpm 12-position turret Tool probe Tailstock Included with the machine: -coolant tank with pump -documentation

Condition: excellent (used), Travels: X-axis: 155 mm Hedpfsyvy Utex Afhonk Z-axis: 320 mm Swing diameter over bed: 450 mm Swing diameter over carriage (slide): 350 mm Maximum turning diameter: 270 mm Maximum turning length: 500 mm Spindle speed, infinitely variable: 75 – 3500 rpm Spindle motor: 7.5 kW Tool turret: 12 stations Dimensions (L x H x W): 2200 x 1635 x 1670 mm Weight: 3800 kg

Condition: excellent (used), Year of construction: 2022, As-new condition; has not yet been used in production Control: CNC path control SIEMENS SINUMERIK 828 D TECHNICAL DATA Main spindle Turning diameter 288 mm Turning length 243 mm Chuck diameter 210 mm Bar capacity 67 mm Max. drive power 10.5/20.0 kW Max. torque 214 Nm C-axis (resolution) 0.001° Speed range up to 4,500 rpm Turret (tool carrier) Number of stations 12 of which driven 12 Speed of driven tools 5,000 rpm Tool interface BMT 45 X-axis 175 mm Z-axis 350 mm Hjdpeyrd Uhefx Afhsnk Tailstock Quill diameter 65 mm Quill stroke 80 mm EQUIPMENT/ACCESSORIES • Hollow clamping cylinder, main spindle • C-axis, main spindle • Tailstock • Driven tool system, turret • Coolant system • Chip conveyor • Rinsing gun • Parts catcher • Three-jaw chuck, dia. 206 mm • Documentation

Condition: used, Year of construction: 2001, turning diameter 290 mm turning length 850 mm swing diameter 600 mm control Siemens type 840 D mm spindle passage 103 mm turning speeds 3000 U/min live tooling 3000 U/min rapid travel - grinding spindle 25 m/min total power requirement 65 kW weight of the machine ca. 11 t Hnedpjyqv Auofx Afhsk Serial No. 1130.2011-30 Equipment: Main spindle / counter spindle 2 power chucks 2 tool turrets C-axis Cabin Chip conveyor Coolant system 22 bar Offer price without tools Optional accessories available for purchase: 106 tool holders for internal and external machining, 20 driven tools (including 10 angle tools) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2003, Siemens 840D control system Turning diameter 254 mm Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Spindle speed 4,500 rpm Hnodpfxoyp Iduj Afhsk 8-position turret Chip conveyor

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 555 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 82 mm, travel distance Z-axis: 600 mm, workpiece diameter (max.): 250 mm, TECHNICAL DETAILS Counter-spindle speed: 59–4,500 rpm Bar capacity main spindle: 65 mm Bar capacity counter-spindle: 51 mm Travel X1/X2 axis: 195 mm Travel Y axis: ± 41 mm Travel Z axis: 600 mm Max. workpiece diameter: 250 mm Max. turning length: 555 mm Number of tool stations upper turret: 12 Number of tool stations lower turret: 12 All tools driven Main spindle nose: A 2-6 Counter-spindle nose: A 2-5 Feed power X1/X2/Y axis: 1 kW Feed power Z1/Z2 axis: 2.1 kW Maximum loading length: 6,200 mm MACHINE DETAILS Control model: Fanuc 18 IT Main spindle power: 18.5 kW / 15 kW Hnodpsynhihjfx Afhek Counter-spindle power: 11 kW / 7.5 kW Bar feeder Max. bar length: 6 m 8 channels with diameters: 22 mm, 27 mm, 32 mm, 37 mm, 42 mm, 47 mm, 57 mm, 67 mm 8 pushers with pusher cone Intermediate sizes can also be loaded Unload magazine Max. bar length: 2 m EQUIPMENT Coolant tank Chip conveyor from 10/2021 Last overhaul of bar feeder 09/2020 (channel replacement, replacement of various bearings, replacement of push rods and spindle liners, including maintenance)

Condition: ready for operation (used), operating hours: 7,738 h, functionality: fully functional, turning length: 225 mm, turning diameter: 260 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 170 mm, travel distance Z-axis: 335 mm, TECHNICAL DETAILS Max. turning diameter: 260 mm Max. turning length: 225 mm Chuck size: 6" Swing diameter over bed: 550 mm Travel X-axis: 170 mm Travel Z-axis: 335 mm Rapid traverse X/Z-axis: 36 m/min Main Spindle Spindle nose (ASA): A2-5 Max. spindle speed: 6,000 rpm Spindle bore diameter: 56 mm Max. bar capacity: 45 mm Turret Number of turret stations: 12 positions Turret indexing time: 0.15 s Tailstock Quill diameter: 60 mm Quill stroke: 80 mm Taper/Quill mount: MT 4 Live Tooling Spindle Max. spindle speed: 5,000 rpm Bar Feeder Model: Fedek Machine Co. DH-65 Bar length min./max.: 280/1,200 mm Bar diameter: 5-65 mm MACHINE DETAILS CNC control model: Fanuc 0i-TD Control on-time: 30,811 h Cutting time: 7,738 h Spindle motor power: 15/7.5 kW Feed motor power X/Z-axis: 3.0/1.8 kW Live tooling spindle motor power: 3.7/2.2 kW Dimensions Dimensions (L x W x H): approx. 1,620 × 1,200 x 1,400 mm EQUIPMENT Side-mounted chip conveyor and chip cart Short bar loader magazine Interface for bar feeder Hsdpfxjyngpts Afhjnk Workpiece catcher (parts catcher) Chuck open/close confirmation switch C-axis indexing Driven tools Trailing (drag-along) tailstock Linear guides Manuals

Condition: used, Year of construction: 2008, turning diameter 250 mm turning length 400 mm control Siemens 840 D swing diameter max. 300 mm workpiece length - max. 400 mm travel -x axis 280 mm feed in x - axis - 30 m/min rapid traverse X-axis 30 m/min travel -z axis 1150 mm feed range Z-direction mm/min rapid traverse Z-axis 60 m/min Hnjdpfx Asynbchefhjk spindle bearing diameter 90 mm spindle head DIN 55026 - Size A6 turning speeds 1 - 5000 U/min tool turret 12 times C4 Capto total power requirement 45 kW weight of the machine ca. 11 t dimensions of the machine ca. 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control; Screw conveyor with chip breaker and return pumping station; NC-steady SMW-SLU-1-OLD Ø10-70mm; 12-fold tool turret SAUTER 0.5.460.220; NC tailstock; Artis monitoring; Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power.