Volo kompozit ve mühendislik ltd sti

Condition: excellent (used), Year of construction: 2021, operating hours: 8,000 h, functionality: fully functional, MAZAK moving column machining center VTC 530 Year 2021 Control unit: SMOOTH G X-axis travel: 1740 Y-axis travel: 530 Fpodpfx Ajzz Sutog Ijl Z-axis travel: 660 Table length: 2300 Table width: 760 Distance between the top of the table and the spindle nose: 180 Maximum workpiece size (length x width x height): 4100x905x790 Table surface: T-slot Maximum workpiece weight: 1400 Spindle speed: 12,000 rpm Spindle mount: ISO 40 Din Rapid traverse rate, X-axis: 42000 Rapid traverse rate, Y-axis: 42000 Rapid traverse rate, Z-axis: 42000 Number of tools: 30 Coolant pressure: 25 Bar, additional tank Machine with 8,000 spindle hours, primarily used for aluminum machining.

Condition: excellent (used), Year of construction: 2023, Traverses X Y Z: 2134 x 813 x 762mm, Table 2134 x 711mm, Spindle Speed 0 – 8,100 rpm, Spindle taper BT40, Spindle Motor 30Hp, HAAS Control, 30 Station ATC, coolant, WIPS, low volt light, and 4th axis. Fjdpfx Agszzppuo Ijpl

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Tool diameter: 63 /126 mm Tool magazine: 40 pcs Weight: 12 t Fsdpfx Aozzl U Tog Ispl Total power requirement: 65 kVA - Equipment: chip conveyor

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CNC machining center Hedelius Forte 7-2600 Magnum Control system: Heidenhain TNC 640 Year of manufacture: 2020 Availability: in transit Internal machine no. 73 Travel distances: X-axis 2,600 mm Y-axis 750 mm Z-axis 800 mm Swinging operation: 2 x 1,000 mm Total clamping area: 2 x 1,490 x 750 mm Table load: approx. 2,500 kg Tool holder: HSK 63 Tool magazine: 50 positions Fsdpfezzl Ugjx Ag Iepl Spindle speed: 50 - 18,000 rpm Drive power: 35 kW Equipment: - Inclined bed coolant system 900 l - Chip conveyor - 2 x flushing guns - Electronic handwheel - Partition wall prepared - High-pressure pump 60 bar - 0-point clamping plates - Vises and tools as required - Prepared for work area partition

Condition: defective spare-parts repository (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 30038908, overall weight: 15,700 kg, We are selling a damaged machine that requires repair – sold as is, without warranty: Machine: Hedelius Tiltenta – CNC machining center – T7 Magnum 1R 40/530/3200/12 Year of manufacture: 2016 Serial number: 30038908 Weight: approximately 15.70 tons Damages (not a complete list): Ball screw of the X-axis is defective, including bearing, adjusting nut, timing belt, and 2 x adjusting nut KGT. Disc spring package on the fixed stop of the X-axis is defective. Hood of the HSA spindle is defective. Machine terminal is defective. MC screen/hard drive is defective. Slight deformations on the chip conveyor and compression on cable connections. The connecting lines of the terminal are defective and must be completely replaced. The tension bolts of the catching device of the Z-axis must be replaced. The machine geometry can only be measured after the machine has been electrically repaired. Any further damage to the geometry can only be recorded and determined afterward. The energy chain must be replaced. Length approx. 1,400 to 1,500 mm. Whether the Sauter swivel head was damaged during transport can only be determined during commissioning. The vertical slide of the Z-axis is defective and must be replaced. Fpodpfxszy U Ruo Ag Ijl The left door must be straightened. Welding work may be required on the guide. Door switch and emergency stop chain must be checked during commissioning. Straightening work may be required at the pick-up station, as the terminal collided with it. The linear measuring system (LMG) of the X-axis is defective and must be replaced. The machine is sold in its damaged condition as a damaged object requiring repair without any warranties! The machine must be picked up within a short period, no later than week 39, otherwise storage costs will be charged. Sale basis: loaded onto a truck at the Spieß location, 61276 Weilrod Storage costs: from 21.09.2026, to be borne by the buyer.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,263 h, functionality: fully functional, machine/vehicle number: 1704080210, travel distance X-axis: 2,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, workpiece weight (max.): 3,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 2,200 mm Travel range, Y-axis: 900 mm Travel range, Z-axis: 900 mm Spindle speed, max.: 6,000 rpm Spindle mount: SK50 Spindle drive: Geared spindle / ZF gearbox Internal cooling through the spindle available Table load, max.: 3,000 kg Table size: approx. 2,350 × 850 mm T-slots: 5 × 22 mm Number of tool magazine positions: 40 Tool mount: SK50 Machine weight: approx. 23,000 kg Operating hours: approx. 5,263 h Fsdozy Ny Dspfx Ag Ijpl EQUIPMENT 3 tool carts with tools

Condition: used, Year of construction: 2007, Mazak VTC-300C-II CNC Vertical Machining Centre with Mazatrol 640m Control. S/No. 192124 (2007), Table Size 2000mm x 770mm, 30 Tool ATC with Quantity of Tooling Fitted, 12000rpm Spindle Speed, BT40 Spindle Taper, FSE Swarf Coolant System, Machine Weight 11500kg. Country of Origin: United Kingdom Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Fjdpfx Ajzy Ncrsg Iepl

Condition: like new (used), Year of construction: 2016, functionality: fully functional, * Okuma Millac 852V II / 50. * Machine in excellent condition with very few cutting hours. * Machine designed for high material removal rates. * Prismatic guides on all axes. * Quadruple prismatic guide system on the Y-axis. * Extremely rigid structure. * Lubrication system for guides, oil-fed, with automatic machine stop. * Renishaw tool probe. * BT 50 spindle taper. * 18.5 kW high-torque motor. * Cutting power of 580 N/m. Fpjdpfxjzy H I Ss Ag Ijl * Chip evacuation capacity of 540 cm/min. * Automatic Okuma IGF OSP300 conversational programming system. * Automatic force control and tool consumption monitoring. * Parameterized automatic tool collision avoidance system. * Communication ports via USB, PCMCIA card, and RS 232. * Tool life management and tool consumption monitoring. * Automatic control of tool torque and stresses. * Table dimensions: 2,200 x 850 mm. * Permissible weight: 2,500 kg. * Spindle speed: 6,000 rpm. * X-axis travel: 2,050 mm. * Y-axis travel: 850 mm. * Z-axis travel: 750 mm. * Oil cooler for the spindle. * Rapid traverse speed: 20,000 mm/min. * Tool storage for 36 tools. * Tool change time: 0.5 seconds. * Chip-to-chip time: 5 seconds. * Independent Knoll coolant system with 70 bar pressure. * 30-micron anti-particle filter system. * LTA fume extraction equipment. * Rear chip extractors, hinged type. * Machine currently in production. * Inspectable by a qualified, certified Okuma technician. * Near-new condition. * Extensive range of BT 50 tool holders. * Electrical transformer, documentation, parts list, electrical diagrams, programming and operations manual. * Machine weight: 20,500 kg. * Immediate delivery, unless sold prior.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 36,000 h, functionality: fully functional, Mazak VTC 800/30SR CNC machining center (2009) Manufacturer: Mazak Type: VTC 800/30SR CNC machining center Year of manufacture: 2009 Fjdpjzy Ac Sefx Ag Ispl Condition: used, currently in production Operating hours: 34,000 hours Spindle speed: 18,000 rpm Tool magazine: 48 tools Further information will follow.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, feed length X-axis: 3,200 mm, feed length Y-axis: 800 mm, feed length Z-axis: 600 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 530, workpiece weight (max.): 3,300 kg, table width: 750 mm, table height: 720 mm, table length: 3,900 mm, rotary table diameter: 315 mm, overall weight: 16,500 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 8,000 rpm, spindle motor power: 25,000 W, spindle nose: ISO 40 DIN 69871, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, - Lowered worktable by 185 mm - Spindle-to-table distance: 325/925 mm - Maximum tool length: 330 mm - 4-position PICK UP tool changer station for drills with a length of up to 700 mm - Coolant system with passage through the spindle at 30 bar, with paper filter - Drag-type chip conveyor - CNC table diameter: 315 mm Fodpfezycawsx Ag Iopl - Prepared for indexing operations - CE marking

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 2,660 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller manufacturer: HEIDENHAIN, controller model: TNC640, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 104, number of axes: 5, This 5-axis SPINNER U5-2520 was manufactured in 2017. It features an impressive X-axis travel of 2,660 mm, Y-axis travel of 520 mm, and Z-axis travel of 460 mm. The machine is equipped with a maximum spindle speed of 18,000 rpm and a tool magazine capacity of 104 tools. If you are looking to get high-quality milling capabilities, consider the SPINNER U5-2520 vertical machining centre we have for sale. Contact us for further details. • B-axis swivel range: +110° / –90° • Automatic tool changer: 2 magazines × 52 stations (total 104 tools) Additional equipment • High-pressure through-spindle coolant system • Chip conveyor Technical Specification Fjdpozx T E Uofx Ag Iepl Taper Size HSK 63

Condition: repair required (used), Year of construction: 1999, functionality: limited functionality, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 750 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 40, Hedelius BC 80 This machine was primarily used for pre-milling operations at our facility until January and is currently out of service due to a hard drive malfunction. It has a Heidenhain control system, and the 4th axis is prepared but has never been installed. Fpsdpfx Agjzx Ecxe Isl The drives were functioning without any issues; however, the spindle makes noise at higher speeds. As we need the space for our assembly operations, we are offering the machine for sale. Our asking price, ex works, is 6,000.00 Euros.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: Itnc 530, spindle speed (max.): 12,000 rpm, spindle motor power: 45,000 W, number of axes: 4, This 4-axis IBARMIA ZV45 L3000 was manufactured in 2003. It features a powerful 45 kW spindle with a maximum speed of 12,000 rpm and an SK40 tool holder. The machine offers a generous working envelope of 3000 x 800 x 800 mm, making it suitable for various machining tasks. If you are looking to get high-quality machining capabilities, consider the IBARMIA ZV45 L3000 vertical machining centre we have for sale. Contact us for further details. • Probing: Probe included • Coolant: Through-spindle coolant Technical Specification Fpedpfjzxz Svex Ag Ijl Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 12,000 rpm, travel distance X-axis: 3,500 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 800 mm, table length: 4,000 mm, number of axes: 5, This 5-axis DOOSAN VCF850 was manufactured in 2018. It features a substantial X-axis travel of 3500 mm, Y-axis travel of 950 mm, and Z-axis travel of 800 mm. The machine operates at a maximum rotational speed of 12000 rpm and includes a BT40 tool holder type. If you are looking to get high-quality milling capabilities, consider the DOOSAN VCF850 vertical machining center we have for sale. Contact us for further details. • Operating hours: 4,500 h • Functionality: Fully functional • Capability: Continuous 5-axis operation Additional equipment • Rotary table Technical Specification Fpedpezw D Rxefx Ag Iol Taper Size BT 40

Condition: good (used), Year of construction: 2006, functionality: fully functional, CNC machining center Hedelius BC 100 P-3500 Magnum Control system: Siemens Sinumerik 840D Year of manufacture: 2006 Fpsdpfx Agozw Dcne Iol Internal machine number: 4 Location: Netherlands Travel ranges: X-axis: 3,500 mm Y-axis: 1,000 mm Z-axis: 770 mm Clamping area: 4,150 x 1,000 mm T-slots: 5 pieces Distance between T-slots: 200 mm Table height above floor: 730 mm Table load: approx. 4,000 kg Tool holder: DIN 69871 SK 50 Tool magazine: 50 stations Spindle speed: 20 - 4,500 rpm Accessories: - Automatic door - Operating panel - Machine hood - Chip conveyor

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, CNC machining center Hedelius T7 – 2600 1 R including standby magazine Control system: iTNC 640 Year of manufacture: 2017 Internal machine number: 68 Travel distances: X-axis vertical/horizontal 2,600 / 2,030 mm Y-axis 750 mm Z-axis vertical/horizontal 695 / 800 mm Swivel range: -98° to +98° Swivel operation: 760 / 1,300 mm Total clamping area 3,080 x 750 mm Table load: approx. 2,500 kg Integrated rotary table Ø 750 mm Interference circle diameter 1,100 mm Tool holder: SK 40 Tool magazine: 33-position Standby magazine: 180 pieces Celox motor spindle: 50 - 12,000 rpm Power: 29 kW Equipment: - KinematicsOpt TNC640 - Handheld control unit HR 510 - Compressed air nozzle on the spindle head Fodpfx Agszwut De Ijpl - Internal compressed air supply - Inclined bed coolant system 900 l - Internal coolant supply (IKZ) 25 bar - Infrared receiver M & H - 3D infrared measuring probe M & H 25.50 - Exhaust filter - Blow-off guns - Flushing guns

Condition: good (used), Year of construction: 2000, CNC Machining Center IBARMIA ZV 40, L 2200 Year of manufacture: 2000 ————— Technical data: X-axis: 2200 mm Z-axis: 600 mm Y-axis: 600 mm WORK TABLE Number of T-slots: 5 Size of T-slots: 18 mm Distance between T-slots: 125 mm Minimum/maximum distance spindle nose/table (optional): 200 (800/1000) mm WORKING SPINDLE Tool holder: SK 40 DIN 69871 Pull stud for tool holder SK: DIN 69872 Tool clamping force SK: 12,000 N Inner bearing diameter: 80 mm Max. standard speed: 8,000 min⁻¹ DRIVE POWER Main spindle motor at 100% (intermittent): 29 (38.5) kW Constant power at standard version from: 1,500 min⁻¹ Fpedpfxjzv Sk Rj Ag Ijl FEED Power in X, Y, Z at 100% (intermittent): 13,000 (16,000) N Rapid traverse rate in X, Y, Z: 30 m/min Max. working feed rate in X, Y, Z: 10 m/min PERFORMANCE Milling performance in steel St 60: 650 cm³/min Drilling performance in steel St 60: Ø 60 mm Thread cutting performance in steel St 60: M36 TOOL MAGAZINE Number of tool positions (optional): 24 (40–52) Tool length max.: 300 mm Tool weight max.: 10 kg Tool diameter max. with full magazine: 85 mm Tool diameter max. with free adjacent positions: 125 mm Tool management: Random Tool change time: 3.5 s Tool change time "chip-to-chip": 7 s GENERAL Structural paint in 2 colors: RAL gray 7037 / blue 5012 Electrical connection: 55 kW Operating voltage: 400 V / 50 Hz Compressed air connection: 6 bar Coolant pump: 0.75 kW

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: BOSCH, controller model: OSA3, number of axes: 4, This 4-axis Matec 30 L gantry milling machine was manufactured in 1998. Consider the opportunity to buy this Matec 30 L gantry milling machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Internal coolant supply Fpjdezvybdepfx Ag Isl

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 2,450 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 850 mm, table width: 950 mm, table length: 2,700 mm, overall weight: 23,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hyundai Wia F 960M vertical machining center was manufactured in 2014. It features a large table size of 2700 x 950mm, capable of handling loads up to 4500kg. Equipped with a 22 kW spindle power and a maximum speed of 8000 RPM, it includes a 30-position tool magazine. If you are looking to get high-quality milling capabilities, consider the Hyundai Wia F 960M machine we have for sale. Contact us for more information. Fjdpfx Agszvv A Re Iepl

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1329, travel distance X-axis: 1,700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 750 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: TNC426/430, spindle speed (min.): 25 rpm, spindle speed (max.): 5,000 rpm, number of spindles: 1, number of slots in tool magazine: 29, Equipment: chip conveyor, documentation/manual, CNC Machining Center HEDELIUS BC 80 HEDELIUS BC 80 CNC machining center with HEIDENHAIN TNC 430 control. The machine is equipped with a powerful Siemens drive system and offers large travel ranges for machining medium to large-sized workpieces. The control supports multi-axis machining and features tool management, probe functions, and tool measurement. Technical data Manufacturer: HEDELIUS Model: BC 80 Control: HEIDENHAIN TNC 430 Axes: X / Y / Z as well as rotary axes A and B (5-axis configuration) Travel range X: approx. 1,700 mm Travel range Y: approx. 800 mm Travel range Z: approx. 750 mm Rapid traverse: up to 30 m/min in the linear axes Max. spindle speed: 5,000 rpm Min. spindle speed: approx. 25 rpm Spindle motor: Siemens 1PH7137-2NG0 Tool magazine: approx. 29 tool positions Probe available (infrared probing system) Tool measurement available Electronic handwheel HR410 available Fpodpfxjzvf Ags Ag Iel Equipment HEIDENHAIN TNC 430 CNC control Tool magazine Tool measurement Workpiece probe 3D ROTATION / Swivel machining Siemens servo and spindle drives Electronic handwheel Coolant system Condition Used Functionality: can be inspected by arrangement Sale in the current condition Delivery conditions Price: €39,500 net, negotiable Incoterm: FCA Dismantling and transport by the buyer Overhead crane can be made available for dismantling and loading after consultation.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 5,440 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D sl, spindle speed (max.): 60,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 12, number of axes: 5, This 5-axis Hamuel Reichenbacher ECO-NT was manufactured in 2011. It features a working envelope of 4,845 mm and 5,440 mm in the X-axis, 1,630 mm in the Y-axis, and 1,000 mm in the Z-axis. The machine is equipped with a powerful spindle speed of up to 60,000 rpm and a versatile tool changer with 12 positions. If you are looking to get high-quality milling capabilities, consider the Hamuel Reichenbacher ECO-NT vertical machining centre we have for sale. Contact us for further details. Fpsdpszu Rnfsfx Ag Iol • Unit Configuration: 5-axis milling units with cardan or fork-mounted spindle • Reckert Spindle Power: 4.6 kW - 15 kW • Reckert Spindle Speed: 0 - 60,000 rpm • Reckert Tool Holder: HSK F25 - F63 • Omlat Spindle Power: 3.5 kW - 7 kW • Omlat Spindle Speed: 0 - 45,000 rpm • Omlat Tool Holder: HSK F25 - F63 • Tool Changer: 12 position tool changer • Extraction & Chip Disposal: Room extraction nozzle for lubricant mist and dust, clamping device extraction • Machine Table Equipment: HPL table surface (smooth or grid), Aluminum table surface (smooth or grid), Steel strips with fitting and threaded bushes • Workpiece Clamping Technology: Vacuum clamps, Pneumatic clamps, Special clamping devices Additional Equipment: • Loading and unloading systems, Torque support for additional units, Air blow nozzles, Air ionisation, Minimal quantity lubrication, Tool breakage control, Tool recognition system, Camera system, Laser projector Supported Materials: • Wood, Aluminum, Steel, Inconel, Titanium, Plastic, Composite materials, GRP, Hybrid plastic/metal parts

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 8,060 mm, travel distance Y-axis: 1,210 mm, travel distance Z-axis: 760 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D sl, total height: 3,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 18,000 W, number of slots in tool magazine: 20, tool weight: 6,000 g, product length (max.): 11,500 mm, number of axes: 5, This 5-axis Hamuel Reichenbacher Vision Flex was manufactured in 2021. It features an impressive X-axis travel of 8,060 mm, Y-axis travel of 1,210 mm, and Z-axis travel of 760 mm. The machine is equipped with a spindle speed of up to 24,000 rpm and a 20-station automatic tool changer. If you are looking to get high-quality machining capabilities, consider the Hamuel Reichenbacher Vision Flex vertical machining centre we have for sale. Contact us for further details. • Number of Axes: 5-Axis (C-axis ±360°, B-axis ±180°) Fsdpfjzu N Uqox Ag Ispl • X-Axis Travel: 8,060 mm • Y-Axis Travel: 1,210 mm (+ 400 mm exchange stroke) • Z-Axis Travel: 760 mm • Axis Rapid Feed Rates: X = 80 m/min, Y = 60 m/min, Z = 40 m/min • Axis Acceleration: 6 m/s² • Spindle Speed: Up to 24,000 rpm • Main Spindle Power: 15 kW (S1 continuous), 18 kW (S6 max) • Spindle Torque: 14.3 Nm (S1), 17.2 Nm (S6) • Spindle Tool Holder: HSK-F63 • Max Tool Length / Weight: 240 mm / 6 kg • Tool Changer: 20-station disc changer (automatic) • with 19" TFT display and HT-2 handheld terminal • Supply Voltage: 400 V (3~ ±10%, 50 Hz) • Rated Current: 90 A • Input Fuse: 100 A (Ic < 17 kA) • Control Voltage: 24 V DC • Total Power: 45 kW • Compressed Air Supply: min. 7 bar, ca. 1,000 NL/min • Lubrication System: Central automatic lubrication system (3 L grease capacity) + Minimal Quantity Lubrication (MQL) with 3 L tank • Machine Weight: 10,000 kg • Machine Dimensions (Floor Space): approx. 11.5 m (X) x 3.0 m (Y) x 3.0 m (Z) Additional Equipment: • LEHMANN chip conveyor, EATON manual pendant station, pneumatically adjustable profile clamping blocks (8 beams), 2-channel control setup for concurrent setup/machining

Condition: repair required (used), Year of construction: 2005, functionality: not functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, Note: Error in the magnetic linear measuring system of the X-axis TECHNICAL DETAILS Number of axes: 3 Travel range of X-axis: 2,500 mm Travel range of Y-axis: 920 mm Travel range of Z-axis: 820 mm B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Fpsdezu Nyaepfx Ag Iol Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Transport packages: 3 EQUIPMENT External cooling Chip conveyor Tool magazine (30 pieces)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller manufacturer: Siemens, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Number of axes: 4 Travel in X-axis: 2,000 mm Travel in Y-axis: 500 mm Travel in Z-axis: 550 mm C-axis rotation: 360° Control system: Siemens CNC Table length: 2,600 mm Table width: 550 mm Tool holder: ISO 40 Main spindle power: 22 kW Spindle speed max.: 12,000 rpm Fpjdpfxszuw Aie Ag Iel Positioning accuracy: 0.01 mm Travel speed: 667 mm/s MACHINE DETAILS Control system: Siemens CNC Connected power: 24 kW Dimensions & Weight Dimensions (L x W x H): 7,500 x 3,700 x 2,500 mm Empty weight: 9,600 kg Transport packages: 2 EQUIPMENT Documentation CE marking

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel ranges Travel range X-axis: 3,048 mm Fpedpoztq Txsfx Ag Isl Travel range Y-axis: 813 mm Travel range Z-axis: 762 mm Main spindle Spindle speed: 6,000 rpm EQUIPMENT Coolant system