Taralex Sa

Condition: excellent (used), Year of construction: 2007, CTV 160 in very good condition. See photo. Ljdpfx Afszv N Efjkjhk The machine can be inspected while running.

Condition: used, Year of construction: 2004, CNC lathe CNC turning machine Lhjdpfxozv Ec To Afksk Boehringer NG 180 Year of manufacture 2004

Condition: used, Haas St 10, 6.5" Diameter 3 Jaw Chuck, Serial No 3092094, Year 05/2015, Complete with Multifeed MX-1B Bar Feed Unit, Note no tailstock. Specifications: Lsdpfx Aezvrd Rjfkshk Swing: 25.25" Machining Length: 16.5" Chuck Size: 6.5" Bar Capacity: 1.75" Power: 15 hp Max RPM: 6,000 RPM Turning Dia: 14"

Condition: excellent (used), Year of construction: 2002, VDF BOEHRINGER NG 180-2 CNC Lathe / Turning Center Year of manufacture: 2002 Machine No.: 1130.2601-30 Country of manufacture: Germany Control: Siemens SINUMERIK 840D Drive system: Siemens SIMODRIVE 611 Technical Data Turning diameter: 290 mm Turning length / distance between centers: approx. 850–900 mm Swing diameter over bed: 600 mm Spindle bore: 80 mm Main spindle speed: 10–4,000 rpm Main spindle drive: Direct drive, suitable for CBN hard turning Spindle drive power at 40% ED: 56 kW Maximum spindle torque at 40% ED: 605 Nm Tool turret: 12 positions Number of turrets: 1 Driven/live tool capability: 12 stations Tool holders: Included / fitted as shown Main spindle chuck: 3-jaw Autoblok chuck The machine is equipped with a second spindle / counter-spindle arrangement, visible on the right-hand side of the working area, together with workpiece support/handling equipment. The photographs also show additional machining/tooling positions around the turret. Electrical Data Supply voltage: 400 V Phases: 3 AC Frequency: 50 Hz Main fuse rating: 125 A Rated current indicated on machine: 100 A Machine Dimensions and Weight Length: approx. 5,949 mm Width: approx. 2,300 mm Height: approx. 2,230 mm Machine weight: approx. 10,000 kg Machine: VDF BOEHRINGER NG 180-2 Year: 2002 Serial No.: 1130.2601-30 Control: Siemens SINUMERIK Max. turning diameter: 290 mm Turning length: approx. 850–900 mm Lhedpfszvfhiex Afkjk Spindle bore: 80 mm Spindle speed: 10–4,000 rpm Spindle power: 56 kW Turret: 12 positions Dimensions: approx. 5,949 × 2,300 × 2,230 mm Weight: approx. 10,000 kg

Condition: ready for operation (used), Gildemeister CNC lathe Model CTX 320 Linear Year : 2003 Working length : 600 mm. Max. working diameter : 245 mm. Spindle speeds : 6000 rpm. Spindle bore 80 mm Spindle speeds on the Sub spindle : 4000 rpm. Spindle borer : 65 mm. Number of tools : 12 pcs. No. of rotating stations : 12 pcs. Spindle speeds rotating tools : 5000 rpm. X-axis travel : 160 mm. Z Travel : 450 mm. Y-axis travel : +/- 35 mm. Control : Siemens Cycle hours : 29000 Lhjdszu R E Depfx Afkek Equipped with : -Subspindle -ECO LM 65 loader -2 straight rotating tool -2 angle rotating tool -6 holder -Chuck -Manuals

Condition: good (used), Year of construction: 2007, operating hours: 37,000 h, functionality: fully functional, Fanuc 31i-TA control system, two turrets, counter spindle, Nakamura CNC portal loader GR210, 14-position stack magazine, Lhodpfxozut Izj Afkok SMW-3 3-jaw chuck for HS and GS, fixed tool holders and automatic tool changer. Available immediately.

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, turning length: 330 mm, turning diameter: 248 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 370 mm, The machine’s control system is defective. TECHNICAL DETAILS Turning diameter: 248 mm Ledpfx Aszul Utofkshk Turning length: 330 mm Travel distance X-axis: 370 mm Travel distance Z-axis: 190 mm Spindle bore: 45 mm Spindle speed: 6,000 rpm Tailstock quill travel: 120 mm MACHINE DETAILS Transformer: 400 V / 200 V EQUIPMENT Integrated CNC control Machine and control as a closed transport unit Linear guides in the X and Z axes Continuously variable AC main spindle drive Programming for constant cutting speed Integrated cold light Power meter for the main spindle drive Controls for automatic, manual operation and CNC programming Central control panel on the right side of the machine High-dynamic three-phase servo motors for the X and Z axes Backlash-free, pre-tensioned precision lead screws for the X and Z axes Automatic central lubrication with electrical monitoring for bed, cross slide and ball screw drives Coolant system with tank, pump, lines and nozzle Electric 12-station turret system MORI SEIKI with automatic direction logic Direct coolant supply through the turret Fixed hydraulic unit for the power chuck Full enclosure of the working area Front sliding door with large viewing window Electrical connection for chip conveyor prepared Data interface V.24 / RS-232-C Control cabinet Freestanding transformer 400 V / 200 V

Condition: defective spare-parts repository (used), Year of construction: 1996, turning length: 330 mm, turning diameter: 248 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 370 mm, travel distance Z-axis: 190 mm, TECHNICAL DETAILS Turning diameter: 248 mm Turning length: 330 mm Lhsdpfxszul Ume Afkok Travel range X-axis: 370 mm Travel range Z-axis: 190 mm Spindle bore: 45 mm Spindle speed: 6,000 rpm Tailstock travel: 120 mm

Condition: used, Gildemeister CTX 320 Linear V6 with Y axis New 2005. FANUC 18T . Collet chuck Supplied with no collets, the original 3 jaw chuck will be supplied. there is also the option to supply a bar feed unit (Imeca VIP 70CNC, year 2001) which is compatible for the machine, however currently not set up. VDI and Driven Tooling Supplied as per images - Note Filtermist Unit will not be supplied Lsdpfeztb Tcsx Afkjhk

Condition: used, Year of construction: 2006, operating hours: 32,615 h, functionality: fully functional, machine/vehicle number: R7S017, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, type of input current: three-phase, Colchester Tornado T8MSY CNC Turning Centre TOTAL PRICE: £15,000 +VAT Manufacturer: Colchester / 600 Lathes Model: Tornado T8MSY Year of Manufacture: 2006 Control: FANUC CNC Control 18i-TB Serial No: R7S017 Location: Dynomec, Castleford, West Yorkshire Max Bar Capacity: 65mm Diameter Machine Overview & Specification • Configuration: CNC Turning Centre with Driven/Live Tooling, Sub-Spindle, and Y-Axis • Max Spindle Speed: 5,000 RPM • Electrical Requirements: 415V / 3 Phase / 50 Hz / 53 Amps • Power On Hours: ~32,615 Hours (see control screen image for exact breakdown) • Cutting Hours: ~7,781 Hours (see control screen image for exact breakdown) • Total Parts Count: 307,051 (as shown on control screen) NOTE ON MACHINE HOURS & PARTS COUNT: The screen readings pictured were taken prior to listing. The machine was operated for a couple of days after the photos were taken, so the current power-on hours, cutting hours, and total parts count will be slightly higher than shown. Included Package • Bar Feeder: Tornado MBF1000T 1-Metre Short Magazine Bar Feeder • Tool Holders: Comprehensive assortment of static and live VDI tool holders (as shown in photos) • Collets: Assortment of collets included • Jaws: Assortment of chuck jaws included IMPORTANT NOTE ON TOOLING: Sale includes the tool holders only. Any cutting inserts, drills, end mills, or boring bars pictured fitted inside the tool holders are shown for demonstration and are excluded from the sale. Payment, Collection & Transport Terms • Cleared Funds: Machine will not be released, loaded, or dismantled until full payment has cleared into our account. • Transport & Rigging: The buyer is fully responsible for all machine rigging, lifting equipment, transport, and loading logistics. • Collection Timeframe: The machine must be collected and removed from site within 14 days (2 weeks) of purchase. Additional Terms & Viewings • Pricing & VAT: Price includes VAT. A full VAT invoice will be provided. • Returns Policy: Returns are not accepted. Sold as seen. • Viewings: Viewing under power on site at Dynomec Ltd, West Yorkshire, is heavily recommended prior to committing to purchase so buyers can fully inspect and satisfy themselves with the machine's condition. Viewings are strictly by prior appointment. • Warranty: Sold with no implied or given warranty. • Availability: This item is listed elsewhere; we reserve the right to remove this listing at any time. Contact: For any further information, please contact us directly. Lsdpfx Aezr Ngnefkshk A VAT Invoice is able to be supplied with the machine

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 307 mm, turning diameter: 250 mm, spindle bore: 51 mm, travel distance X-axis: 185 mm, travel distance Z-axis: 370 mm, Key figures at a glance: 250 mm maximum turning diameter, 420 mm swing over bed, 307 mm maximum turning length, Lhsdpfjzr Ir Asx Afksk 51 mm spindle bore, 4000 rpm maximum spindle speed, 5.5/7.5 kW main motor, an 8-station turret, 185 mm X-axis travel and 370 mm Z-axis travel. The year of manufacture is 2004 and the control system is a Fanuc Series 21i-TB. The machine plate states a supply of 220 V, three phase, 50/60 Hz, 42 A and a maximum power supply of 16.1 kVA, with control voltages of 100 V AC and 24 V DC. Buyers on a 400 V network should plan for a matching transformer. The approximate footprint is 1600 x 1280 x 1890 mm at a weight of around 2800 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details turning diameter 210 mm turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. The machine is being sold partially overhauled. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Lhsdezru Ukopfx Afkok Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, 4-axis CNC turning center Control system: MITSUBISHI M730 Main and counter spindle 2 turrets, each with 12 stations (all powered) 2x C-axis 2x Y-axis (+- 25 mm) Air filter by AR Filtrazioni Coolant system KNOLL KF 10 Chip conveyor Bar loader FMB 3-36 3200 turbo Renishaw measuring probe Numerous accessories (see images) Ledpfxjzqu Uuj Afkjhk Availability: End of October 2026

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: documentation/manual, CMZ Turning Center 2 Axes: X, Z Model: TBI-520 CNC: Fanuc Year: 2002 Lodpfx Afjzqbkcekshk Without Tailstock

Condition: used, Year of construction: 2015, CMZ TX 66 Y2 Quattro Year 2015 Fanuc 31i control Maximum turning diameter (mm): 255 Distance between spindle centers (mm): 639 Maximum speed (rpm): 4000 Maximum bar diameter: 66 mm Ledpfx Aszp Itujfkshk X-axis: 190 mm Y-axis: +- 40 mm Z-axis: 500 mm Chuck: 210 mm 2 BMT 55 tool heads 2 spindles 2 Y-axes Spindle bore: 66 mm Tool probe Chip conveyor Tooling included Documentation

Condition: used, Year of construction: 2006, machine/vehicle number: IntNr231573, A used MORI SEIKI NL 2500/1250 CNC lathe, year of manufacture 2006, is available for sale. The machine is equipped with a MORI SEIKI MSX 850III / MAPPS III control system and an IRCO SIMAG bar feeder for automatic bar loading. Technical data Control: MORI SEIKI MSX 850III / MAPPS III Origin: Japan Design: Slant-bed CNC lathe Centre distance: 1,250 mm Maximum turning length: 1,298 mm Maximum turning diameter: 356 mm Standard turning diameter: 275 mm Swing diameter over bed: 923 mm X-axis travel: 260 mm Z-axis travel: 1,345 mm Spindle speed: up to 4,000 rpm Spindle bore: approx. 80 mm Turret: 12 stations Number of turrets: 1 Chip conveyor Driven tools C-axis Y-axis Ledpjzp Ig Iofx Afkshk Machine weight: 7,600 kg Machine dimensions (L x W x H): 5,000 x 2,300 x 2,400 mm The machine can be inspected under power by prior appointment. Technical data and specifications subject to change and error. Sale subject to prior sale.

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231574, Machine Specifications Control: MORI SEIKI MSX-850 Lhedozp Ifwopfx Afkok Design: Slant-bed turning center Version: SY with Y-axis Turret: 12-position with driven tools Working Area Max. turning diameter: 356 mm Standard turning diameter: 275 mm Max. turning length: 705 mm Traverse Travels X-axis: 260 mm Y-axis: ±50 mm / total approx. 100 mm Z-axis: approx. 795 mm Rapid traverse X/Y/Z: 30 m/min Counter spindle LNS Quick Load Servo 2 bar feeder Max. bar length: approx. 1,500–1,600 mm / 63" The machine can be inspected under power by appointment. Specifications and technical details are subject to change and error. Prior sale reserved.

Condition: used, Year of construction: 2000, controller manufacturer: Siemens, controller model: 840D - Powerline, _____ Description: Year of manuf. : 2000 Control : Siemens 840D - Powerline Turning diam. : 150 mm Mainspindle: Speed:5.000 rpm Power (max.):25 kW Torque (max.):263 Nm Barcapacity:65 mm Subspindle: Speed:5.000 rpm Power (max.):25 kW Ledezpczmepfx Afkehk Torque (max.):263 Nm Toolcarrier I (X/Z): Technology:Turret with 12 stations Taper:VDI 30 Tooldrive:4.500 rpm Movement in X/Z:170/445 mm Rapid travers in X/Z:24/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI 30 Tooldrive:4.500 rpm Movement in X/Z:170/445 mm Rapid travers in X/Z:24/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Coolant pumps Rawmaterialfeed:Interface Barloader : Attention:Displayed Clamping devices and tools are NOT included in our offer!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK QUICK TURN NEXUS 250-II M 500U Max. machining diameter: 380 mm Max. machining length: 504 mm Max. milling speed: 4,500 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 74 mm Lsdsznnl Ispfx Afkjhk Machine is equipped with: - CNC control: Mazatrol Matrix - KITAGAWA 3-jaw chuck, B-210, diameter 254 mm - Tool Eye - C-axis - NC tailstock - reinforced coolant pump - chip conveyor, discharge to the side - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Technical details are in attachment. Measurement arm not come with machine. Please see photos marked with red cross. Ledpfx Afezmx I Dokshk

Condition: good (used), Year of construction: 2003, CNC: GE Fanuc Series 18i-TB No. 02 motorized turrets Y-axis on rear turret Sub-spindle Lhsdpjzmgh Ejfx Afkek TOP loader

Condition: good (used), Year of construction: 1998, functionality: fully functional, turning length: 305 mm, turning diameter: 210 mm, spindle bore: 56 mm, spindle speed (max.): 25 rpm, spindle speed (min.): 5,000 rpm, Revolver lathe with 12 stations (non-powered) Lodpfx Afjzl Ei Sskjhk Tool holder: MK 3 Chip conveyor Bar feed tube: IRCO DS 34.8 (year of manufacture 2013) Dimensions (L x W x H): - Machine: 4000 x 1700 x 1700 mm - Bar feed tube: 5500 x 1300 x 1500 mm Total weight: approx. 4,000 kg

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, turning diameter over cross slide: 270 mm, turning length: 639 mm, turning diameter: 255 mm, spindle bore: 66 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 4,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 500 mm, spindle motor power: 15 W, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 20 m/min, total height: 2,030 mm, total length: 2,840 mm, total width: 2,190 mm, overall weight: 9,300 kg, Equipment: documentation/manual, This CNC lathe has been fully inspected and overhauled directly by the manufacturer, CMZ. The work included replacing the main components subject to wear, restoring the geometries, and completely realigning the machine, bringing it back to a condition of high precision and reliability. Key features: - CNC FANUC 31iTB iHMI - Main and secondary spindles - Double turret with Y-axis - Removable tool presetter Lhedpfozlymxjx Afkjk - Chip conveyor with lateral discharge - Second high-pressure coolant pump (8 + 15 bar) - Used IEMCA MASTER 80 bar loader available upon request Main overhaul operations: - Replacement of the B-axis slides - Replacement of the belts and seals of the main and secondary spindles - Installation of a new complete secondary spindle assembly - Overhaul of the B and lower Z axis guards - Restoration of the machine's geometries - Realignment of the S1 and S2 spindles - Realignment of the turrets - Complete check of the powered tools Upon request, we can provide a complete list of the operations performed and photographic documentation of the main stages of the overhaul carried out by the manufacturer. For over 30 years, Otto Machine has been selecting and selling used machine tools in Italy and abroad. The machines can be viewed at our showroom or via video call. Contact us to receive the complete technical data sheet, photographs, videos, and all information about the machine. It is possible to arrange a visit to our showroom or a video call to view it remotely.

Condition: used, turning diameter over cross slide: 250 mm, rotational speed (max.): 3,500 rpm, CNC Lathe Brand: Biglia Model: B131/S1 Lhjdpfszlfqvsx Afkek Maximum turning diameter: Ø250mm Distance between centers: 400 mm Spindle bore: Ø49 mm Maximum spindle speed: ±3500 RPM Digital readout

Condition: like new (used), Year of construction: 2022, MAZAK QUICK TURN 250MY SmoothG Max. turning diameter: 380 mm Max. turning length: 504 mm Max. milling speed: 5,000 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 80 mm The machine is equipped with: - CNC control: Mazatrol SmoothG - KITAGAWA 3-jaw chuck, BB-210, diameter 254 mm - Tool Eye - C-axis - Y-axis - Interface for bar feeder - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Chip conveyor Lhjdpezk I Tqsfx Afksk - 8 pcs. fixed tool holders - 2 pcs. powered tool holders The machine has only 900 hours of pure machining time!!!