Sia Melwood

Condition: used, Year of construction: 2007, NC Control System TS 10: Windows CE operating system USB port Consisting of a chain track and overhead pressure belt ensuring optimal clamping of the workpiece during processing. Glue Unit, Edgebanding Application and Pressing Unit VC-710: Tekno glue system: Glue roller that can run with or against feed direction Quick-change glue pot for easy cleaning or glue colour/type change Automatic edge feeding for coil material or solid strips: Ø900 mm disc for coil material Magazine for solid strips with cooling system and manual vertical adjustment Knives for cutting coil material up to 3 mm thickness with automatic pressure adjustment Pressing unit: Large motorised Teflon-coated roller with individually adjustable pneumatic pressure 5 × Ø60 mm Teflon-coated rollers with pneumatic adjustment; first two are reverse-tapered Machine supplied with full sound-insulated safety enclosure. Technical Data: Workpiece height: 10–60 mm Workpiece height with corner rounding: 10–35/60 mm Edge material height: 14–64 mm Coil edge thickness: 0.4–3 mm Solid strip thickness: 0.4–15 mm Workpiece overhang from chain: 25 mm Minimum workpiece length: 140 mm Minimum workpiece width (length 140 mm): 85 mm Minimum workpiece width (length 250 mm): 50 mm Feed speed: 10–14–20 m/min Electronic NC-controlled positioning of pressure beam Lighting inside safety enclosure Infeed plate spacer with capacitive sensor RPT Akron 800 pressure rollers with timed insertion IN-701V pneumatic tilting of end-trimming motors in 4 positions 3 pneumatic exclusions of machining units Quick selection of 2 positions from control panel for CR-202 or CR-401 8000058 – Quick Selection of 4 Positions (Replaces the 2-position quick selection) 8000037 – Heated Infeed Fence For removing moisture from the bonding surface. 8000100 – Glue Pre-Heating Unit QM-701 Facilitates glue colour/type change Refills glue pot automatically Glue melted at 180°C and transferred to glue pot 8000300 – Pre-Milling Unit FI-701 – 1800 W Prepares the workpiece before edge application: Horizontal and vertical movement of 2 motors on linear guides Independent automatic engagement of each motor Independent copying shoes with manual adjustment and mechanical digital displays Auto-Set system positions cutters according to panel thickness Includes 3 mechanical high-precision digital displays 1 set Dia cutters for panel thickness 12–22 mm Motor Power Increase to 3500 W for Pre-Milling Unit End Trim Unit IN-701-V Iodjx Ah Ixepfx Ag Dsa Top/Bottom Trimming Unit RS-701 – 800 W CNC-controlled pneumatic switching between 2 trimming offsets, incl. pneumatic exclusion. Tiltable Top/Bottom Trimming Unit RI-701 – 650 W NC-Controlled Multi-Function System (4 operations) 4-position revolver head with multi-function knives and independent pneumatic exclusion of motors. 4-Motor Multi-Function Corner Rounding Unit CR-401 Fast change between thin and thick edges (0.4 mm ↔ 3 mm) via FAST 2-position system Equipped with R=3 mm, motors at 12,000 rpm Corner rounding speed 18 m/min, trimming 20 m/min Edge Scraper RB-701 Glue Scraper RCC-701 Brushing Unit SP-700 Hot Air Blower PH-700

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 2459, Machine in very good condition - Very user-friendly control panel - Minimum workpiece width approx. 80 mm - Minimum workpiece length approx. 200 mm - Feed rate approx. 10 m/min - Transport chain with firmly bolted special chain plates - Double roller top pressure - Machine length 4,300 mm - Machine width 1,400 mm - Weight approx. 1,250 kg - Extendable workpiece support at the front - Automatic central lubrication for cross-cut saw & corner milling unit - Melt glue container with Teflon coating (very low maintenance) - Ready for operation after approx. 5-6 minutes - Jointing unit - Pneumatic trim roller cutter Iodpex Ahmusfx Ag Dea - Direct glue application to the workpiece - Trimming unit for front & rear edges - Flush/chamfer/radius milling unit - Corner rounding - Surface scraper with dual sensing

Condition: like new (used), pre-milling unit granulate glue station pneumatic pre-cut guillotine pressure zone with three rollers unit with two precision trimming saw blades top/bottom milling unit with profiling cutters Isdpfxsxz Rgho Ag Dja profile scraper top/bottom flat scraper automatic conveyor lubrication year of manufacture: 2012

Condition: excellent (used), Year of construction: 2012, operating hours: 500 h, functionality: fully functional, Holzher Uno 1302 , Year 2012 , Flat scrapers , Ijdpjxz Icgofx Ag Dea Fully functional , Can be tested ,

Condition: excellent (used), Year of construction: 2017, operating hours: 100 h, functionality: fully functional, Edgebander , Felder G330 , Exelent , 2017/18 , Low working hours , Teflon Gluepot , Quck system adjustment , Flat scraping for finisin Unit , Iodpfexz Ia Ssx Ag Dsa

Condition: used, Year of construction: 2010, Used machine Ijdpoxz Iafsfx Ag Doa Year of manufacture: 2010 Condition: Well-maintained, machine has been serviced regularly Equipment and technical specifications: - Jointing unit - Glue application system with glue pot and roller - Crosscut saw - Crosscut shear - Pressure zone - Extendable workpiece support - Quick-heating glue pot - Combination milling unit - Surface scraper - Chassis Availability: Approx. mid-April 2026 Storage location: Hesse

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Features and technical specifications: Processing dimensions Workpiece thickness: 8–60 mm Workpiece width: from 70 mm Edge height: up to 8 mm Edge thickness (coil material): up to 3 mm Feed Feed speed adjustable from 8 to 14 m/min, steplessly variable Gluing technology Glue system for granulate Glue pot positioned above the feed Interchangeable HOMAG QA 65 N glue pot Iedpfoxz H U Ujx Ag Dja Designed for EVA and PUR processing Quick-change function Units Jointing milling unit Pre-heating zone Pressure station, NC-controlled Front and rear end trimming station with two motors Station for flush, radius, and chamfer processing Corner copying unit with two motors Scraper units: profile and flat scrapers Buffing unit Additional and operating equipment Integrated spray unit Air cushion table for workpiece support PU pressure rollers Mechanical infeed barrier HOMAG powerTouch operating interface Right-hand machine configuration CE compliant Dimensions: approx. 6,060 x 950 x 1,150 mm Weight: approx. 2,200 kg Availability: short notice Location: North Rhine-Westphalia (NRW)

Condition: good (used), Year of construction: 2021, 0,4 - 3 mm Workingpiece thickness from to 10 - 50 mm Feed speed 9 m/min m/min. Isdpfxexzuxhe Ag Dea

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0 - 251 - 20 - 4507, Due to a switch to solid wood processing, this machine has been used very little and is in good condition. Available for viewing in the workshop. Iedpfxoxzp Uwe Ag Dja

Condition: used, Year of construction: 2012, 1 edge banding machine, manufacturer Format 4, model PERFECT 710, year 2012, serial no. 200.12.004.12, touchscreen control, internal no. I440048 Iedpfexzny Ejx Ag Dsa

Condition: ready for operation (used), Year of construction: 2024, Additional Equipment Application unit with Teflon coating for 1.5 kg EVA granulate Upper and lower polishing unit This FORMAT4 TEMPORA 60.06 glueBox x-motion edgebander was manufactured in 2024. It features a turntable magazine with a diameter of 750 mm for edging material ranging from 0.4-3 mm, a GlueBox application unit, and upper and lower polishing units. The machine includes advanced x-motion Plus control with a 15' SmartTouch screen and a multifunctional milling unit for precise plastic edge machining. Contact us for more information about this machine. Iodjxzltpspfx Ag Dsa Application Types Edge Banding

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT Ijdpfexzfwbex Ag Dja - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: used, Year of construction: 2015, functionality: fully functional, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machines for gluing and processing straight edges with roll material (melamine, PVC, ABS, veneer) and strip material (solid wood, laminate, sliced veneer, etc.) • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass Iodpexzb Iiefx Ag Doa • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness 10-60 mm Workpiece thickness with MFU aggregate (depending on profile) 10-35/60 mm Edge height 14-64 mm Edge thickness – roll material 0.4-3 mm Edge thickness – strip material (*) 0.4-10 (12) mm Workpiece overhang 25 mm Minimum panel length 140 mm Minimum width (at 140 mm length) 85 mm Minimum width (at 250 mm length) 50 mm Feed speed 12 m/min Dust extraction* 8x connection Ø100 mm Compressed air connection 7 bar Glue pot capacity 2 (approx.) kg * Depending on selected aggregates. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge to the workpiece, automatically cuts it from the roll, and presses it onto the workpiece, guaranteeing perfect positioning. - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs with 0° to 15° angle. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a thickness of max. 3 mm. JOINTING CUTTER UNIT RT02 Joins the workpiece before glue application. Equipped with two 1.8 kW high-frequency motors at 12,000 rpm. SCRAPER UNIT RB02 For post-processing thick PVC/ABS edges. FLAT SCRAPER RC02 Aggregate for removing excess glue in the edge-to-panel area. Equipped with tracing rollers and a flat knife with engagement control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using fabric polishing discs. The unit automatically adapts to the workpiece thickness. ANTI-ADHESIVE SPRAY UNIT ADZ02 Precision application of anti-adhesive using injectors activated by numerical control. KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing through: - controlled pressure of the glue roller - automatic disengagement in case of feed stop - automatic ON/OFF of the glue unit • REVERSE system to switch the glue roller for co- or counter-rotation Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue with machines equipped for EVA gluing. NC Axis for Fine Trimming Unit Kit for the automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system. Pair of multiprofile cutters for the fine trimming unit: 25-degree bevel, radius 2 mm + radius 1 mm plus straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of the tracer to match the edge thickness. Adjustment takes place via the control system. Function for processing only on the corners. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system.

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Ijdpfx Agexy Tm Ie Dsa

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: M/53056, total length: 9,800 mm, overall weight: 4,500 kg, compressed air connection: 6 bar, input voltage: 400 V, input frequency: 50 Hz, Single-sided edge banding machine in right-hand configuration - with jointing unit - gluing unit - double end cutting unit - flush trimming, chamfering, and radius milling unit - corner rounding unit - scraper and edge buffing unit with high-performance automation - pressure zone with one driven roller and six follow-up rollers - automatic edge thickness adjustment for all units - automated chamfer thickness adjustment of the top pressure to panel thickness - pneumatic engagement/disengagement of all processing units with monitoring - Machine in CE-compliant design with complete encapsulation of processing zones by high-quality noise protection hoods. Machine length: 9,800 mm Machine weight: 4,500 kg Gluing unit - for hot-melt adhesive granules - with quick heating tank, preheating time: 6 minutes Isdpfxexy Sizo Ag Dsa - electronic temperature control - adhesive application roller (no adjustment required for different material heights) - operates in both co- and counter-rotation, automatically activated via program control Edge thickness: 0.2 - 20 mm Workpiece dimensions: Minimum width: 60 mm Minimum height: 8 mm Maximum height: 60 mm Minimum length: 160 mm for strip edges / 60 mm for continuous roll edges / 150 mm with double end cutting unit Workpiece transport - heavy-duty chain conveyor with precision sliding guides for chain support plates with flat and round guide rails to ensure positive workpiece transport - feed speed: 12 - 20 m/min, adjustable via electronic frequency inverter from the central control panel, values can be saved in work programs - motor power: 5.5 kW Panel thickness adjustment Motorized adjustment of double roller top pressure, preselection via the central control panel, values can be saved in work programs Edge thickness adjustment - automatic positioning of all edge thickness-related units including the pressure zone, preselection via the central control panel, values can be saved in work programs Machine control - central control panel - PLC and line control for contactless control of the processing units Central control panel - for flexible and easy operation of the edge banding machine, with a specifically developed user interface for clear and rapid access to all important machine and unit statuses - intuitive menu navigation via two-line text display, supported by clearly arranged symbols with two-color LED status indicators PLC - high-performance PLC to industrial standards for fast and efficient interaction with the machine and for controlling all functional groups and line control Line control - high-resolution line control of all processing units with +/- 1mm accuracy over the full machine length - complete access via the control panel for all program-controlled processing units - values can be saved in various work programs EFU - electronic frequency inverter Connections Electrical: 3 x 400 V, 50 Hz, rated current 42 A, protection: 50 ampere, supply: 5-core, 5 x 10 mm², control voltage: 24 V Extraction: 1 x 120 mm, 1 x 160 mm, 1 x 120 mm, extraction air velocity: min. 20 m/sec, required capacity: approx. 65 m³/min Compressed air: 6 bar, 1/4" - consumption approx. 300 l/min, required minimum pressure: 4.5 bar, all workpiece blow-off lines are line-controlled.

Condition: used, Holz Her Accura 1556 Premium Heavy-duty version with full equipment Edge thickness 0.4 – 20 mm 18.5" touchscreen control in 16:9 format, rotatable and tiltable Synchronized belt bridge with motorized, position-controlled height adjustment Long, motor-driven adjustable infeed fence Pre-milling unit for panel edge preparation before the glue station, with 2 NC servo axes Syncro edge magazine, fully automatic for rolls and strips MOT3, with 2 motorized hold-down devices GLU-JET automatic glue application station; for cartridges and PUR bonding, thin film technology Ijdpfx Aexy Nxysg Doa Glue height adjustment / touch nozzle Maximum edge height: 60 mm Pressure unit with 4 motor-pneumatically driven rollers, NC servo axis End trimming unit for rolls and strips up to 20 mm edge thickness, with electro-pneumatic adjustment of the trimming saws from 0–10° angle Flush trimming unit 20 mm MOT3, motorized horizontal adjustment Multifunction milling unit MOT6 with multifunctional milling technology Flush trimming 8 mm Radius milling R1, 3; R2 (2x) Chamfer milling up to 45° Copy-milling unit MOT4, with automatic tool changer MOT2 and oscillating tracer, corner copying, postforming corners, with 4 NC-controlled axes; for top/bottom longitudinal edge milling and copy-milling of front/rear end vertical edge. Working height 60 mm. R1, 3; R2 (2x); chamfer 45° Scraper unit MOT8 incl. high gloss package and fully automatic tool changer, R1; R1.3; R2 (2x); chamfer 45° Nesting package Flat scraper unit with pre- and post-scanning Usage-controlled, oscillating buffing unit for post-processing and edge polishing with 2 textile wheels Spraying units for infeed and outfeed, plus antistatic agent for pressure unit Infeed area electronically controlled separating agent spray device Pressure unit electronically controlled antistatic spray device Outfeed area electronically controlled cleaning agent spray unit with cleaning fluid Automatic chain lubrication Barcode scanner The machine is FACTORY-SERVICED and in TOP CONDITION Year of manufacture: 2021 / Leasing possible The machine is connected and ready for demonstration in the showroom Available from stock Lieboch

Condition: used, OTT Tornado - TOP Control system: via a 15-inch color touch monitor for full automation and maximum operator comfort. CM-CombiMelt gluing system suitable for processing EVA and PUR hot-melt adhesives as well as all standard cleaning granulates. Jointing station for edging chipboard panels. Isdpfoxy Iw Usx Ag Dsa Automatic roll magazine. Automatic edge magazine. Double end-trimming unit with automatic swivel 0° / 3°. Flush trimming unit for flush trimming up to 12 mm. Fine radius trimming unit – profile cutters R2 – R5. Automated copying and corner rounding unit. Scraper unit – radius. Scraper unit – radius and chamfer. Surface scraper unit. Sliding agent spray unit – PU. Cleaning set with fine buffing unit. Very stable workpiece support with roller conveyors – front with scissor extension. Complete tool set included. The machine is LIKE NEW and in EXTREMELY WELL-MAINTAINED CONDITION. First commissioned in 2009, very low operating hours – approx. 1,600. Machine from lease return / leasing option available. Available from stock in Lieboch.

Condition: excellent (used), Felder G360 Edge Bander, Pre-milling cutters, Glue application by roller, Ijdpfx Agjxy Iwbo Dja Pneumatic pre-cut guillotine, Pressure rollers, Finishing saws, Top and bottom milling unit R1 – R2, Profile scraper, Polishing unit Edge thickness: 0.4–3 mm, Max. panel height: 45 mm, Feed speed: 7 m/min, Total power requirement: 2.8 kW, Machine length with table: 290 cm, without: 240 cm.

Condition: excellent (used), Year of construction: 2022, operating hours: 41,000 h, functionality: fully functional, SCM edge banding machine equipped with servomotors. In excellent condition, but we are switching to another brand... 12" touchscreen control panel Three spray stations (infeed, central, and polishing outfeed) Servo-driven adjustment of infeed fence Servo-driven adjustment of workpiece height DIA tools (60 mm height) on the pre-milling unit SGP-E glue pot with upper guide End trimming unit with the possibility of R-edge trimming Milling unit with stepless adjustment of R1/R2 radius Scraper unit with stepless adjustment of R1/R2 radius Corner rounding unit with stepless control via the system Isdpfsxy Ht Uox Ag Dja The machine is still in operation Price negotiation possible...

Condition: excellent (used), Year of construction: 2017, Technical data will be updated soon. Isdpjxyu Umsfx Ag Dea

Condition: new, Year of construction: 2024, New machine Iodpfsxymd Tox Ag Doa Year of manufacture: 2024 (arrived in 2025) MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Technical specifications: Edge thickness for rolls: 0.4 - 3 mm (depending on material) Edge thickness for strips: 0.4 - 8 mm (depending on material) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (Restrictions may apply to individual units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner rounding) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: Motorized pressure bridge adjustment Extendable workpiece support XL, 600 mm spacing 3-color LED light in the infeed Motorized adjustment of the infeed guide Long infeed guide 1252 mm I-Tronic package Edge Control PPC 322 W IntelliSet: intelligent Tool correction f.a.s.t = fast setting technology ECO mode Energy saving mode Prepared for RETURN connection (third-party manufacturer) BS 501 guide system; right-angled workpiece feeding for front edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece thickness: min. 60 mm - Workpiece length: approx. 140 - 450 mm FG201 jointing unit with 2 64 mm high milling heads MG 301 edge feeder GluJet GJ 725 NC PUR PRO adhesive application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° pivoting for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reactant (water molecules) from the PUR, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently of the machine's power supply and automatically compensates for any vacuum loss. - PUR fully under control! DW 301 printing unit with motorized NC axis; 1st roller driven by pneumatic plunge control, 2 conical pressure rollers GM301 spray unit after printing unit with lubricant for high-gloss edges KA 501 pneumatic trimming unit (60 mm) Extraction hoods for trimming unit FR301 MOT6 multifunctional trimming unit Shelf program FF 301 MOT1 profile trimming unit ZK301 MOT4 scraper unit including high-gloss package FK702 surface scraper Complete spray unit for separating and cleaning agent GM 301 spray unit after printing unit (high-gloss edges) SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: Short-term Storage location: Hochheim

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - MAGELIS control system - For EVA-based hot-melt adhesive - Jointing: 2 x 1.5 kW, u=12000, 200 Hz - End trimming: 2 x 0.2 kW, automatic swiveling 0°/3°, 2 HM saw blades 140 mm - Flush trimming: 2.07 kW, with WPL heads HF 70, diameter 70 mm - Radius trimming: R2 - Radius scraper Ijdpfx Aexymfweg Dja - Surface scraper - Glue pot above - Workpiece dimensions: - Minimum width: 70 mm - Thickness: 8-42 mm - Minimum length: 150 mm - Edge thickness: 0.2-6 mm - Feed rate: 12 m/min - Extraction port: 160 mm Dimensions: 4,500 x 1,250 x 1,300 mm Weight: 1,650 kg Availability: short notice Location: Baden-Württemberg

Condition: good (used), Year of construction: 2010, 0,4 - 5 mm Workingpiece thickness from to 8 - 60 mm Isdpfx Agexylpuj Dsa Total length 2814 mm Feed speed 11 m/min.

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Isdpfsxyiilex Ag Dsa

Condition: new, Year of construction: 2024, functionality: unexamined, machine/vehicle number: 1000065502, Single Sided Edgebander Stream B 9.5 with: Ijdexyf Nzopfx Ag Dja premilling unit, gluing unit with EVA-EVA REAL TIME GLUING SYSTEM WITH PRE MELTER (dual EVA gluing system consisting of two independent glue heads tahat allows for real time colo switching without the need for manual glue head changes), 6 position edgebanding containers, edn trimming unit, rough milling unit, fine trimming unit, corner rounding unit, universal milling unit, edge scraper, glue scaper, brushing unit, phon.