Mdk Michal Jadczak

Condition: good (used), Year of construction: 2018, functionality: fully functional, Siemens 828 chop-mill Palett 650x400 mm X/Y/Z 560/360/480 mm 24.000 v/min, BT 30 Big plus ATC 20 pos. Itsdpfjy S Ubtjx Amijg

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 172822005, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC530i, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 500 mm Swivel axis A: ±120° Rotary axis C: 360° Rotary table diameter: 500 mm Spindle speed (max.): 18,000 rpm Rapid traverse rate, X-axis: 36 m/min Rapid traverse rate, Y-axis: 36 m/min Rapid traverse rate, Z-axis: 36 m/min Number of tool slots in the tool magazine: 24 Positioning accuracy: 0.01 / 300 mm Repeatability: ±0.01 mm MACHINE DETAILS Control system: Heidenhain TNC530i Coolant supply: 20 bar Dimensions & Weight Dimensions (L x W x H): 3,015 x 5,050 x 3,000 mm Total weight: 9,000 kg Type of input current: Three-phase Power: 60 kVA Frequency: 50 Hz Rated voltage: 400 V Number of phases: 3 + PE Rated current at full load: 100 A Short-circuit strength: 25 kA Maximum load current: 200 A Fuse protection / rated current: 80 A Operating hours Spindle hours: 6,940 h Program runtime: 7,686 h Machine operating hours: 17,193 h Control system operating hours: 19,880 h EQUIPMENT Iedpfx Asy S Ua Nsmietg Chip conveyor

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, total height: 2,600 mm, table load: 700 kg, overall weight: 3,800 kg, spindle speed (max.): 22,000 rpm, number of axes: 3, This 3-axis Fidia CORTINI HS 644 was manufactured in 2001. It features an X-axis travel of 600 mm, Y-axis travel of 450 mm, and Z-axis travel of 400 mm. The machine has a maximum linear axis speed of 30 m/min and a robust table size of 1000 x 500 mm with a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the Fidia CORTINI HS 644 vertical machining centre. Contact us for further details. • Accuracy: • Positioning accuracy (ISO 230-2): 0.010 mm • Speeds: • Max linear axis speed: 30 m/min • Max acceleration: 3 m/s² • Table: • Dimensions: 1000 x 500 mm • T-slots: • Number: 4 • Width: 14 mm • Pitch: 140 mm • Electrical supply: • Standard: EN 60204-1 • Voltage: 400 V Ijdpfjy S S A Iox Amistg • Frequency: 50/60 Hz • Pneumatic supply: • Standard: PNEUROP 6611 • Pressure: 0.7 MPa ±10% (7 bar ±10%) • Footprint: 2150 x 2450 mm • Environmental conditions: • Ambient temperature: 10–40 °C • Relative humidity: 10–80% (non-condensing)

Condition: good (used), Year of construction: 2001, operating hours: 3,700 h, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: TNC 430, rotational speed (max.): 10,000 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 3,400 h, coolant supply: 10 bar, number of spindles: 1, number of slots in tool magazine: 21, Equipment: rotational speed infinitely variable, Vertical BAZ MIKRON VC 500 with internal cooling, 10 bar Year of manufacture: 2001 Control system: Heidenhain 430 TNC Operating hours: 3,300 hours Technical data: Spindle speed: 0 - 10,000 rpm Ijdpfx Amey S Rmxeietg Drive power: 13 kW Tool holder: SK 40 Number of magazine positions: 21 pcs. Travel ranges: X-axis: 510 mm Y-axis: 510 mm Z-axis: 560 mm Table size: 650x600 mm Accessories: - Internal coolant system with 10 bar - Chip conveyor - Electronic handwheel - Renishaw 3D probe - Oil mist extraction - Rotoclear The machine was used in a training workshop – in very good condition!

Condition: used, HERMLE C 600 V is a 3-axis machining center, engineered for precision, high accuracy and reliability. Table 800×465 mm, travels X 600 / Y 450 / Z 450 mm, table load max 200 kg; tool changer 30 stations, spindle taper HSK‑A63. Spindle 20–16,000 min⁻¹, spindle power 15 / 10 kW; feed 1–30,000 mm/min, rapid 35 m/min, max feed force 6000 N. Supply 3×400 V 50 Hz, total power 35 kVA, weight ≈6800 kg, size 2500×2020×2750 mm, noise 78 dB(A). Coolant through spindle 40 bar. Achieves tight tolerances; typical sectors: automotive, aerospace, medical, watchmaking, tooling. Itsdpoy S Dddofx Amieg

Condition: ready for operation (used), Year of construction: 2002, operating hours: 13,028 h, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, total height: 2,450 mm, table width: 2,400 mm, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, product length (max.): 3,000 mm, number of axes: 3, This 3-axis DMG DECKEL MAHO 64V Linear was manufactured in 2002. It features an X-axis travel of 640 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine includes a table clamping surface of 850 × 600 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 64V Linear vertical machining centre we have for sale. Contact us for further details. • Rapid Traverse (X / Y / Z): 30 m/min • Max. Feed Rate: 20000 mm/min • Table Clamping Surface: 850 × 600 mm • Max. Table Load: 600 kg Ijdpfxjy S Azhs Amietg • Automatic Tool Changer (ATC) Magazine Capacity: 30 stations • Max. Tool Diameter: 80 mm (140 mm with adjacent pockets empty) • Max. Tool Length: 300 mm • Max. Tool Weight: 7 kg • Spindle Speed Range: 20 – 8000 rpm • Tool Taper: SK 40 / ISO 40 • Spindle Power (100% / 40% ED): 13 kW / 19 kW • Max. Spindle Torque: 140 Nm Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2018, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 465 mm, YEAR 2018 MODEL VC 3600 CNC FANUC i Series Specifications X-axis travel: 520 mm Y-axis travel: 360 mm Z-axis travel: 465 mm Table size: 650 x 375 mm Table load capacity: 500 kg Spindle speed: 12,000 rpm Spindle power: 5.5/7.5 kW Tool holder: BT 40 Tool magazine: 20 positions Accessories Adapter with D’Andrea TRM/50 boring head Iedpfey Sh Adjx Amijtg Gerardi vice 345x120 mm Machine is supplied with manuals and EC Declaration of Conformity. All technical data given is indicative and may be subject to change without notice. Therefore, the details are not binding.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, DMG MORI ecoMill 600 V Year of manufacture: 2016 Control unit: SIEMENS 840D Travels: 600 x 560 x 510 mm Table size: 900 x 560 mm Spindle mount: SK40 Max. spindle speed: 12,000 rpm Tool changer: 30 positions Total weight: 5,000 kg Various accessories Iodpfxey Saazs Amiotg

Condition: good (used), Year of construction: 1998, functionality: unexamined, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 520 mm, table width: 420 mm, table length: 840 mm, spindle speed (max.): 6,000 rpm, Table size 840 x 420 mm Travel X/Y/Z: 600 / 410 / 520 mm Spindle SK 40, speed up to 6000 rpm Main drive 8.5 kW Tool changer with 22 stations Control: Heidenhain TNC 370 Ijdpfjy R Um Tjx Amietg Including coolant system

Condition: used, Year of construction: 2004, Deckel Maho DMC 70 V – Vertical Machining Centre Offered here is a used vertical CNC machining centre Deckel Maho DMC 70 V equipped with Heidenhain TNC 426 control. Technical specifications: Type: Vertical machining centre, 3-axis Travel X/Y/Z: 700 / 500 / 500 mm Table size: approx. 750 x 500 mm Itjdsy R E H Djpfx Amieg Spindle speed: up to 8,000 rpm Tool changer: Chain magazine Control: Heidenhain TNC 426 Operating voltage: 400 V / 50 Hz Manufacturer: Deckel Maho GmbH, Pfronten Condition: Used, on-site inspection possible

Condition: good (used), Year of construction: 2015, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: Siemens, x-axis travel 635 mm y-axis travel 510 mm z-axis travel 460 mm Control system SLIMline Siemens Main spindle speed range 20 - 12,000 rpm Main spindle drive power 13 / 9 kW Torque 83 / 57 Nm Tool holder SK 40 Clamping surface of table 790 x 560 mm Number of T-slots 4 + 1 T-slot width 4 x 14H12 / 1 x 14H7 mm T-slot spacing 100 mm Isdpfsy Rzbwjx Amijtg Max. table load 600 kg Table height above floor 720 mm Number of tool stations 20 pos. Max. tool diameter 80 mm Max. tool diameter with free adjacent slot 130 mm Max. tool length 300 mm Max. tool weight 6 kg Total tool weight approx. max. 60 kg Feed rate max. 20,000 mm/min Rapid traverse 30 m/min Total power requirement 17 kVA Machine weight approx. 4.0 t Space requirement approx. 4.5 x 4.0 x 2.8 m ICS 12 bar Chip conveyor Preparation for 4th axis (rotary table)

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 675002, travel distance X-axis: 650 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 1,100 mm Travel Z-axis: 500 mm C-axis rotation: 360° MACHINE DETAILS Control: CNC Itjdpfsy Rxryjx Amijg Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,800 x 2,800 mm Net weight: 13,000 kg EQUIPMENT Chip conveyor Tool magazine Probe

Condition: excellent (used), Year of construction: 2000, operating hours: 1,100 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 520 mm, table load: 500 kg, overall weight: 2,700 kg, spindle speed (max.): 12,000 rpm, FOR SALE: VMC 600/22 Vertical Machining Center – Upgraded High-Speed Unit A high-performance, extensively upgraded vertical machining center is available for sale. This machine has undergone significant technical modernization, greatly increasing its speed and reliability compared to standard models. Key Upgrades: - Control System Retrofit (2018): Completely modernized CNC for improved reliability and efficient programming. - High-Speed Spindle: Upgraded to a 12,000 rpm spindle (replacing the standard 6,000 rpm unit). The new spindle has only approximately 300 operating hours. Technical Data: - Travel paths: X: 600 mm, Y: 410 mm, Z: 520 mm - Worktable: 840 x 420 mm (max. load: 500 kg) Itodpoy Rvdtofx Amisg - Tool changer: 22-position tool magazine - Rapid traverse rates: X/Y 40 m/min, Z 20 m/min - Spindle taper: BT 40 - Machine weight: approx. 2,700 kg This VMC is a production-ready powerhouse. Thanks to the high-speed spindle upgrade, it is perfectly suited for modern high-speed machining and efficient material removal.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 8,200 h, functionality: fully functional, machine/vehicle number: 28850018432, TECHNICAL DETAILS Tool diameter: max. 140 mm Speed at maximum diameter, max.: 6,500 rpm Balancing quality according to DIN ISO 1940: G 6.3 Tool Magazine Number of tools: 24 Tool diameter, standard tools: max. 80 mm Tool diameter, special tools with adjacent positions free: max. 140 mm Tool length: max. 300 mm Tool weight: max. 7 kg Magazine load: max. 72 kg Table Clamping surface with T-slots DIN 650-14: 800 x 500 mm Loading height, top of table: 850 mm Workpiece height: max. 240 mm Table load capacity: max. 500 kg Coolant System Tank capacity with standard chip container: 150 l Tank capacity with spindle cooling: 80 l Pump performance standard, flow rate: 30 l/min Pump performance standard, pressure: 1.2 bar Tank capacity with chip conveyor option: 750 l Pump performance, chip conveyor option, flow rate: 40 l/min Pump performance, chip conveyor option, pressure: 3.0 bar Tank capacity including chip conveyor: 750 l Pump performance, internal coolant supply, flow rate: 30 l/min Pump performance, internal coolant supply, pressure: 15 bar Chip Disposal Chip conveyor discharge height: 850 mm Chip conveyor type: scraper belt MACHINE DETAILS Rated power: 30 kVA Rated current: 42 A Delayed main fuse: 3 x 50 A Operating voltage: 400 V Iodpfx Asy Rta Ejmiotg Frequency: 50 Hz Compressed air connection: 6 bar Required system delivery rate: 38 Nm³/h Ambient temperature: +5 to +40 °C Average temperature over 24 h: +35 °C Relative humidity: 30–95 % Dimensions & Weight Transport dimensions of the machine with table (L x W x H): 3.1 x 2.1 x 2.4 m Transport weight: approx. 4,200 kg Mounting elements: 4 x BNV 150/4 EQUIPMENT Fixed station coding Vertical tool changer Pick-up system via work spindle Coolant system Spindle cooling Chip conveyor Internal coolant supply Mounting elements BNV 150/4

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, x-travel 1000 mm y-travel 600 mm z-travel 600 mm Control: Heidenhain TNC 426 Iodjy Rpa Ispfx Amijtg Spindle nose: 100–700 mm Work table: 1,080 x 580 mm Max. workpiece weight: 550 kg T-slots: 7 pcs. T-slot width: 14 mm Tool magazine with 36 positions Max. tool weight: 8 kg Max. tool length: 340 mm Machine weight approx. 6.2 t Space requirement approx. 4,790 x 5,330 x 2,905 mm

Condition: good (used), travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, controller manufacturer: Röders, table width: 700 mm, table length: 900 mm, spindle speed (max.): 36,000 rpm, operating hours of spindle: 100 h, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Precision machining center Röders Tec RP 800 Ijdpfxey Rgale Amiotg Year of manufacture: 2005 Control: Röders Tec Spindle speed: 35,000 rpm Spindle has been overhauled – approx. 100 hours run time Drive power: 17 kW Tool holder: HSK 50 Number of magazine slots: 30 Internal coolant supply: 20 bar X-axis: 800 mm Y-axis: 600 mm Z-axis: 400 mm Equipment: Chip conveyor Coolant system 3D probe Electronic handwheel

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 610 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, table width: 450 mm, table length: 800 mm, spindle speed (max.): 8,000 rpm, Model: 610L Itodjy N Uh Uspfx Amiog Control: Fanuc Series Oi-MC Year: 2012 Table Area: 800 x 450mm ‘X’ Axis: 610mm ‘Y’ Axis: 460mm ‘Z’ Axis: 450mm Spindle Taper: BT 40 Spindle Speeds: 8000 RPM Carosel 12 Station Tool Changer Dimensions: 2200 x 2300 x 2300mm high Weight: 3400 KGS

Condition: excellent (used), Year of construction: 2007, Controller Mitsubishi 64S Travel X/Y/Z 600 x 400 x 460 mm Table size 700 x 410 mm Table load capacity 250 kg Spindle speed 12,000 min⁻¹ Tool magazine for 24 tools, BT 40 Internal coolant 20 bar Iedpfjy N D Hgsx Amiotg Exhaust system Chip conveyor

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 10651-7, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table load: 800 kg, spindle speed (max.): 42,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 600 mm Travel distance Y-axis: 450 mm Travel distance Z-axis: 300 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Maximum spindle speed: 42,000 rpm Spindle taper: HSKE40 Number of spindles: 1 Table width: 405 mm Table length: 405 mm Max. table load: 800 kg Number of tool magazine slots: 26 MACHINE DETAILS Control system model: RMS6, version 3.18 Input voltage: 400 V Dimensions & Weight Dimensions (L x W x H): 4,210 x 2,350 x 2,600 mm Weight: approx. 7,000 kg Itsdpfx Ajy Nzuhemiog EQUIPMENT Documentation/manual Infinitely variable spindle speed control Chip conveyor Blum laser 3D tool setter Hirschmann 9000 zero-point clamping system Electronic handwheel Extor extraction system

Condition: good (used), Year of construction: 2006, operating hours: 13,500 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, nominal power (apparent): 34 kVA, controller manufacturer: Heidenhain, controller model: Itnc530, spindle speed (max.): 120,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Kondia S600 SEASKA – 5-Axis CNC Machining Center (Heidenhain iTNC530, 12,000 rpm, 40 Tools) For sale is a powerful and precise Kondia S600 SEASKA. This machine is configured as a 5-axis machining center (XYZ + A/C) and is ideally suited for complex milling operations in professional environments. Itsdpfxoy Nwqfo Amiog Technical Features and Highlights: * Heidenhain iTNC530 CNC control * 5-axis machining (X, Y, Z, A, C) * Linear glass scales in X, Y, and Z * SK40 spindle taper * Spindle speed up to 12,000 rpm * Internal coolant system with 50 bar pressure * Tool magazine with 40 positions * Integrated chip conveyor * Includes complete rack of SK40 tool holders Travel Distances and Performance: * X: 660 mm * Y: 400 mm * Z: 510 mm * Rapid traverse X/Y: 36 m/min * Rapid traverse Z: 30 m/min * Feed rate: 5 m/min Machine Data: * Footprint: 3243 x 3351 x 2745 mm (L x W x H) * Weight: approx. 7,000 kg * Solid cast iron construction A current geometry inspection report is being prepared and will be supplied with the machine. Condition & Viewing: The machine is in well-maintained and fully functional condition. Viewing under power is possible on site. A test machining (sample milling) can also be arranged, allowing you to directly verify the machine’s condition and precision. * Sale to commercial customers / businesses only * Price is net, plus statutory VAT * Subject to prior sale, errors, and change * No warranty, returns, or liability ⸻ If seriously interested, please contact us. Viewing under power available at any time.

Condition: used, Year of construction: 2017, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, Equipment: chip conveyor, MACHINING CENTER DMG MORI DMC 650 V Year: 2017 Manufacturer: DMG MORI Model: DMC 650 V CNC Control: Celos with Siemens 840D Itsdpfx Ajy Nkcnsmieg Machine dimensions: 4725 x 5090 x H 2670 mm Weight: 5,900 kg AXIS TRAVELS X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm Rapid traverse: 42 m/min Feed rate: up to 42,000 mm/min SPINDLE speedMASTER Spindle speeds - Continuously programmable: up to 20,000 rpm - In setup mode: 800 rpm Motor power - Max. drive power (40% duty cycle): 35 kW - Rated power (100% duty cycle): 25 kW Torque - Max. spindle torque (40% duty cycle): 130 Nm - Rated torque (100% duty cycle): 86 Nm Tool holder: SK40 Tool clamping force: 11.2 kN TABLE Table size: 960 x 570 mm T-slot spacing: 100 mm Number of T-slots: 4 / 14H12 Reference slot: 1 / 14H7 Max. table load: 800 kg Loading height (floor to table top): 800 mm 4TH AXIS – NC ROTARY TABLE MORI SEIKI DDRT 200X Center height: 140 mm Table diameter: 200 mm Center hole diameter: 65H7 mm Clamping surface diameter: 50 mm Clamping slot: 14h6 mm Clamping torque: 600 Nm Max. torque: 280 Nm Rotational speed: 150 rpm Positioning time: 5 s Repeatability: 3 s Max. workpiece diameter: 250 mm Max. speed: 200 rpm Load capacities - Max. clamping weight (one-sided): 102 kg - Max. vertical load: 100 kg - Max. vertical load with tailstock: 250 kg - Max. horizontal load: 250 kg Weight of NC rotary table: 115 kg TOOL MEASUREMENT – TT160 Probing accuracy: < 15 µm Max. deviation of measuring element: 5 mm Axial triggering force: 8 N Radial triggering force: 1 N Max. probing speed: 5 m/min Protection class: IP67 (EN 60529) Working temperature: 10–40°C CHIP CONVEYOR WITH COOLANT EXTENSION SYSTEM Coolant tank capacity: 230 l MACHINE COOLING UNIT Effective cooling capacity: 4.5 kW Cooling circuit pump: 40 l/min Refrigerant: R 134a Coolant: Water - Antifrogen® L 70/30 % Coolant filling volume: 38 l Coolant discharge temperature: +15° to +30°C Permitted ambient temperature: +10° to +45°C Unit weight (dry): 130 kg Additional Information Operating hours: approx. 2,200 20-position tool magazine Machine supplied with manuals and CE certificate of conformity All technical data provided are for reference only and subject to change without notice, and therefore are not legally binding.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 22,465 h, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle speed (max.): 16,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis HERMLE C 600 V was manufactured in 1998. It features an X-axis travel of 600 mm, Y-axis travel of 450 mm, and Z-axis travel of 450 mm. The machine is equipped with a tool magazine that holds 30 slots and an internal coolant supply of 10 bar. If you are looking to get high-quality machining capabilities, consider the HERMLE C 600 V vertical machining centre we have for sale. Contact us for further details. • Tool magazine: 30 slots • Internal coolant supply (IKZ): 10 bar • Operating hours: • Control on: 88,852 h • Machine on: 79,968 h • Program run: 26,348 h Additional equipment • Chip conveyor • Spindle air blast Ijdpfx Aoy Ndu Romijtg • Handheld control unit • Cooling system: KNOLL EKA/700 (YOM 1998)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 23,574 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 8,000 rpm, The following machine components have been renewed: - Motor & pump of the hydraulic system - Hydraulic and pneumatic hoses (partially) - Control cabinet LT module replaced - Drum of the Knoll system TECHNICAL DETAILS Travel distance X-axis: 600 mm Travel distance Y-axis: 560 mm Travel distance Z-axis: 560 mm B-axis: 360 x 0.001° (60 rpm) Ijdpsy Nbunjfx Amietg Spindle speed: 8,000 rpm Table size: 6 pallets, each 500 x 400 mm Table width: 400 mm Table length: 500 mm Table load capacity: 350 kg Working feed rate: 1 - 60,000 mm/min Rapid traverse: 60 m/min MACHINE DETAILS CNC control model: Siemens Sinumerik 840D Total length: 7,000 mm Total width: 5,000 mm Coolant supply: 50 bar Coolant system capacity: approx. 1,100 L Motor power: 13 kW / 20 kW Torque: 124 / 191 Nm Total power requirement: 20 kW Dimensions & Weight Space requirement (L x W): 7 x 5 m Machine weight: approx. 16,000 kg Operating hours Power-on time: approx. 48,804 h Spindle operating hours: total 23,574 h EQUIPMENT - Documentation/Manual - Steplessly adjustable spindle speed - Chip conveyor - Knoll cooling unit with drum filter (30/40/50 bar via M-command) - Tool measurement: Renishaw probe - Tool breakage monitoring in the working area - Pallet storage (4 positions) - Pallet sequence operation - Fully enclosed work area in accordance with UVV - Network capability - Technical documents & layout plan

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,956 h, functionality: fully functional, machine/vehicle number: 17211, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, controller model: Siemens Sinumerik 840 D solution Line, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 680 mm Table width: 400 mm Table height: 30 mm Table length: 500 mm Table load capacity: 500 kg Max. workpiece height: 850 mm Max. pallet load: 500 kg Pallet changer: 2 pallets, automatic Change time: approx. 8 s Tool magazine: 60 tools Itsdpfx Asy Nbt Djmisg Spindle speed (max.): 18,000 rpm Spindle motor power: 32,400 W MACHINE DETAILS Control system: Siemens Sinumerik 840 D Solution Line Dimensions & Weight Dimensions (L x W x H): approx. 5,150 x 2,800 x 3,025 mm Weight: approx. 12,800 kg Noise emission: 80 dB(A) according to EN ISO 3744 Coolant supply: 80 bar Operating hours Total operating hours: 27,412 h Automatic operation: 11,155 h Spindle hours: 9,956 h EQUIPMENT Documentation/manual Chip conveyor Siemens spindle diagnostics & remote diagnostics (Teamviewer) Energy-efficient system with regenerative feedback Standby mode for energy savings Direct drive NC rotary table 6-channel clamping hydraulics (90 bar) Increased spindle torque for high-performance machining Torque support Central coolant supply system Renishaw OMP60 optical touch probe Tool breakage control Pallet sequence operation Crane infeed/outfeed software Signal light for operating states Work area/machine equipment: shower nozzle, cleaning pistol, vortex nozzle, emission extraction interface Foot switch for air nozzle Documentation: fully digital (PDF)

Condition: used, Year of construction: 2001, x-travel 630 mm Ijdpfx Ajy I A Umemijtg y-travel 500 mm z-travel 500 mm control Heidenhain TNC 430 spindle speed: 10000 U/min power capacity - milling spindle 13/9 kW feed 30 m/min rapid traverse 30 m/min no. of workpieces in the magazine 24 Stück tool taper SK 40 table surface area 800 x 500 mm table load 0,5 t Overall size 1,9 x 3,3 x 2,6 mm weight of the machine ca. 4500 kg Used vertical machining centre in good condition. - external eletronic hand wheel - coolant system - servo tool magazin