Gewerbe "Dmitri Perfilov"

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is an Oerlikon Nonwoven ecuTEC+ electrostatic charging machine, designed for the electrostatic charging of filter media. The machine is intended for integration into a production line and processes material webs with a width of up to 1,700 mm. The material is guided through the machine by a system of deflection rollers and electrostatically charged using charging bars. The system is equipped with an HMI control panel and can operate in constant-current or constant-voltage mode. The machine has seen very little use and is being offered due to changes in the production setup. Manufacturer: Oerlikon Nonwoven / Oerlikon Neumag Model: ecuTEC+ Year: 2020 Application: electrostatic charging of filter media Maximum material width: 1,700 mm HMI operator panel Adjustable charging system Gusdezumiropfx Aafjf Constant-current / constant-voltage operating modes Designed for integration into an industrial production line CE documentation available According to the manufacturer's documentation, the material is guided through the machine via seven deflection rollers and electrostatic charging takes place at four charging positions. The system includes the machine frame with safety guarding, deflection roller/charging section, electrical cabinets with control electronics and high-voltage generators, and touchscreen control panel. Condition: Used, very low operating use. The machine is currently dismantled/disconnected from the production line. Detailed technical documentation is available. A comprehensive PDF specification/manual can be provided to interested buyers upon request. Inspection can be arranged by appointment. Further information, photos and documentation are available on request.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Industrial spinning extruder from an Oerlikon Barmag production installation, suitable for polymer processing and nonwoven applications. 2 extruders are available for sale at the moment. The machine was manufactured in 2020 and has seen very little use. Machine details: Manufacturer: Oerlikon Barmag / BBE Engineering Type: 9E10/30D-HT Project: P13000 Year of manufacture: 2020 Application: spinning / polymer extrusion / nonwoven production Polymer configuration: PP Single-screw extruder Industrial heavy-duty design The original Barmag documentation identifies the unit as a “Spinning Extruder” and covers its operation as part of the complete production plant. The equipment includes the extruder with drive system, feeding/dosing equipment, electrical/control equipment and associated components as shown in the photographs. Components from well-known industrial manufacturers including Siemens, Flender, Nordson and Oerlikon Barmag are installed. The machine is currently still installed, which allows the buyer to inspect the equipment in its existing installation. Condition: Used, very low operating use Year: 2020 Availability: Immediately / by arrangement Location: Germany Guedezulh Tjpfx Aafjf Extensive original technical documentation is available for the machine, including operating and maintenance documentation, drawings and information concerning the drive, gearbox, heating, cooling and electrical systems. The documentation also includes drawings and technical information concerning the extruder and its associated equipment. The complete PDF documentation with detailed technical specifications can be provided to interested buyers upon request. Additional photographs and information are available upon request. Worldwide inquiries are welcome.

Condition: good (used), Year of construction: 2002, functionality: fully functional, filter area: 48 m², filter pressure: 15 bar, pressure: 380 bar, cake thickness: 25 mm, total width: 1,500 mm, total length: 4,800 mm, total height: 1,980 mm, overall weight: 4,600 kg, number of chambers: 44, Equipment: documentation/manual, safety light barrier, For sale is a chamber filter press with the following accessories: Hydraulics, filter plates, safety devices, control system, swing plates, feed pump, press frame (steel platform), 3 cake containers for forklifts. Gujdjzulf Sepfx Aafjf Chamber filter press 800 Side-frame press 15 bar filtration pressure Approx. 540 liters Open filtrate discharge 800x800 PP 25mm chamber depth 44 chambers Approx. 2.5 meters useful length Length 4800 x Width 1500 x Height 1980 mm 4600 kg Price upon request. We would be happy to provide you with an individual offer.

Condition: new, Max. capacity steel tube (mm) 32x2 Max. capacity stainless steel tube (mm) 25x1.5 Max. capacity steel profile (mm) 30x30x1.5 Min. Tube (mm) 8 Max. Radius (CLR) 225 Min. Radius (CLR) 20 Control system PLC Max. bending angle (°) 190 Guodezuklkepfx Aafsf Screen 10” PC Windows touch screen

Condition: used, Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, 75 L Intensive Rubber Mixer with a 220 kW AC Motor, Gearbox, Drive and Control Panel, Pneumatic Hopper Door, and Hydraulic Discharge Door. Ready for operation and in good condition. Gsdpfx Aaozufu Hefsuf

Year of construction: 2004, condition: excellent (used), Stainless Steel Fermenters / Storage Tanks - 39,000 L - Food Grade These ASTM 304 stainless steel tanks are highly versatile and ideal for the industrial storage or fermentation of wine, spirits, distillates, and craft beer. They are also perfectly suited for the essential oil industry to store floral waters (like rose or lavender distillate) and for water treatment facilities requiring large-capacity hygienic storage. Their conical bottom design ensures 100% full drainage and effortless cleaning, making them highly efficient for various food-grade and liquid processing applications. • Quantity: 6 units • Capacity: approximately 38 m3 (38,000 liters) each • Type: Vertical stainless steel tanks • External dimensions: • Diameter: 2.80 m • Height: 7.20 m Gujdpfx Aszud Irsafjf • Material: Stainless steel (food grade), ASTM 240 type 304 / AISI 304 • Last used: 2017 • Condition: Good, stored empty • Location: Rosenovo, Sredetz Municipality, Burgas region, Bulgaria • Suitable for: wine, juice, beer, edible oils, food & beverage liquids or other liquids (they have been used for wine storage). PRICE IS PER UNIT. Available as a full lot or individually (Full lot price is 7000 EUR per unit). Loading assistance possible.

Condition: used, Space containing 15 galvanizing tanks of various sizes. Self-built. Location: Bad Tölz. Gedpfx Aaozud E Dofeuf Inspection is welcome. We have other used machines available. Please contact us.

Year of construction: 2020, condition: like new (used), functionality: fully functional, For sale: A.Celli Nonwovens Stream In Line, manufactured in 2020 Industrial in-line winding and slitting system designed for the processing of nonwoven materials. Machine details: Manufacturer: A.Celli Nonwovens S.p.A. Machine type: Stream In Line Machine version: 668 Serial number: 2020026 Year of manufacture: 2020 CE marked Gsdpszudfdjfx Aafjuf Country of manufacture: Italy The machine comes from an industrial nonwoven production facility and is offered as shown in the photos. The system includes the main machine structure, winding and roller assemblies, drives and associated machine components. A detailed PDF with the complete technical specification of the machine is available upon request. We will be happy to provide it to seriously interested customers. Additional photos and further information are also available upon request. Price: on request / negotiable. Please contact us for further information.

Year of construction: 1995, condition: used, functionality: fully functional, machine/vehicle number: 9481, CADALPE – Macchine Enologiche Wine Press We are offering for sale a CADALPE – Macchine Enologiche wine press, manufactured in Italy, designed for grape processing and wine production. Technical Specifications: • Manufacturer: Cadalpe – Macchine Enologiche • Country of origin: Italy • Type/Model: See manufacturer’s label • Type: wine press • Construction: stainless steel • Drive: electric / hydraulic system • Year of manufacture: 2005 Machine application: The press is primarily designed for: • grape pressing, • extracting grape juice, • processing wine grapes, • use in wineries and food processing facilities. Machine condition: • The machine is complete, • functional and in working order, Gsdpfx Aaezucttsfsuf • its condition matches the photos, • the structure and technological components are complete, • suitable for immediate further use. This is a robust, professional machine suitable for winemaking operations, both small and large wineries, or as a supplement to existing grape processing equipment.

Year of construction: 2018, condition: used, 2018 | Heatwork HW3600 | Used Small Equipment 📍Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 38500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 1 inspection points 1 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Engine hours 2495 - HeatWork HW3600 Ground Thawing / Hydronic Heater - 2018 Diesel and electric hydronic heater, 103 kW, Made in Norway Overview: HeatWork HW3600 (year 2018), a mobile ground-thawing and frost-prevention machine. Closed-system hydronic heater delivering fluid-borne heat up to 100 degrees C for thawing frozen ground, curing concrete, heating buildings and halls, drying and frost protection. Three independent hose circuits (630 m total) for flexible coverage of large areas. Year-round machine. Condition: Fully functional when run on AC mains power - heating, pump and controls all operate normally. When running on the built-in diesel generator, the unit may shut down unexpectedly and fail to restart; fault suspected in the control box. Sold as-is; buyer should budget for control-box diagnosis/repair to restore off-grid diesel operation. Usable now wherever mains power is available. Key specifications: Year: 2018, Engine hours: ok. 2,500 h Max heating effect: 103 kW, Fluid temp: 0-100 degrees C, Efficiency: 94 percent Pump: 3,900 l/h, Burner: single stage Fuel: winter diesel (Arctic Class 2) / biodiesel; ok. 3.5 l/h thawing 200 m2, max 9.0 l/h Diesel tank: 320 L, Run time: up to 90 h, VTV fluid: ok. 50 L Hoses: 3 x 210 m = 630 m, reinforced (max 30 bar), System pressure: 2-6 bar Electrical: 230 V / 2,600 W, Weight: 1,860 kg, Origin: Norway Capacity: Thawing 0-200 m2 (internal reel), 200-400 m2 with external reel; frost prevention up to 400 m2. Thawing ok. 48 h at 60-80 cm depth. Applications: Frozen ground/ice/snow, concrete curing, heating buildings/garages/workshops, preheating before casting, point-thawing foundations/manholes, roof thawing, drying, water heating. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41209 Equippo" is commonly used when looking up more details online. Gusdpfxozuapre Aafsf 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 8445, functionality: fully functional, operating hours: 3,000 h, power: 80 kW (108.77 HP), input voltage: 380 V, input current: 126 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension height: 1,000 mm, total height: 4,425 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, We offer this Rohde SG 80/120 nitriding furnace, which is new and manufactured in 2024. Manufacturer: Rohde Schutzgasofen GmbH Model: SG 80/120 Year of manufacture: 2024 Condition: As new Category ID: 34 Type ID: 4293 Type: Nitriding furnace If you have any questions or need further information, please do not hesitate to send us a message or contact us by phone. Gusdpfxezuabzo Aafef

Condition: used, Bushing Cutoff Gjdszt Taujpfx Aafjuf IAC Enclosure

Year of construction: 2005, condition: used, Plastic shredder Godpfxezt R Szo Aafjuf

Year of construction: 2023, condition: excellent (used), 2023 Vixen Surface Treatments 2 Stage FL250 Industrial Parts Washer Front Pneumatic Vertical Loading Door Dimension W2,690 x H1,910mm. Voltage 400V. S/No. 3177 (2023). Please note a loading charge of £50 + VAT to be added to buyer's invoice. Gjdpfx Aozt R E Ueafsuf With Extractor Fan, Pumps, Filtration, Signal Tower, Loading Trolley, Staging & Wash Gun. Overall Dimensions W3,300 x D4,440 x H2,800mm.

Condition: used, functionality: fully functional, Separate single-position unit with a horizontal roller shaft, presumably with pneumatic clamping, housing/drive unit, pneumatic auxiliary functions, and its own control panel with a material length counter. Gjdpfxszt I U Ts Aafouf Intended for the controlled feeding of web-shaped materials into a subsequent coating, laminating, or converting system. Manufacturer: Cavitec, Caratsch–Villars, Münchwilen, Switzerland. Model, year of manufacture, serial number, electrical connection values, maximum roller data, and web speed are unknown due to the absence of a nameplate.

Condition: new, Model CNC 114R1 Max. steel tube capacity (mm) 114.3 x 6 Max. stainless steel tube capacity (mm) 114.3 x 5 Min. tube diameter (mm) 32 Max. steel profile capacity (mm) 80 x 80 x 4 Max. radius (CLR) 300 Min. radius (CLR) 55 Control system PLC Gusdpfxszt Ir Ss Aafsf Max. bending angle (°) 190 Screen 17” Industrial PC with Windows touch screen Bending drive Hydraulic

Year of construction: 2023, condition: new, Unused item! Variable displacement pump, axial piston with swash plate design, for hydrostatic drives in open circuit. The new price was EUR 14,000.00 net. Mannesmann Rexroth replica, new part. The flow rate is proportional to the drive speed and displacement and can be infinitely adjusted at constant drive speed. Manufacturer: Zhen Yuan Model: A7VO355DR/63R-VPH02 Year of manufacture: 2023 Nominal size: 0-355 cm³ Control device: pressure regulator Displacement: 355 cm³ Max. speed: 1320 Gjdpfxszt Iq Uj Aafjuf

Condition: used, functionality: fully functional, INATEC slot die coating system, type 100050 500 Heated multi-nozzle coating head for continuous, web-width application of hot melt adhesive onto web-shaped materials. The bar features a number of pneumatically controlled individual coating heads, which Gjdpfx Aaozt Ip Rofeuf can be switched on individually or together. Electrical heating power 11 kW, operating voltage 230 V, protection rating IP 44. Adhesive supply via external pump/drum melter. Manufacturer: INATEC GmbH, Leverkusen. Identification No. 950672. Year of manufacture probably around 1995.

Year of construction: 1989, condition: not inspected (used), Industrial twin-shaft shredder C3 VKF-250 (Industrial twin-shaft shredder C3 VKF-250 from the manufacturer Přerovské strojírny ČR) Technical specifications: • Type: C3 VKF-250 • Manufacturer: Přerovské strojírny • Year of manufacture: 1989 • Drive: 2 x electric motor with gearbox (engine power 22.5 kW) • Power supply: 3 x 400 V Gsdpfx Aezt Hmzoafeuf • Machine location: Papir-Novak s.r.o. – Czech Republic Machine application: primarily for processing: • plastic waste, • wood, • paper and cardboard, • textiles, • cables, • light industrial and recyclable waste. Machine condition: • mechanically complete, • equipped with two electric motors with gearboxes, • control panel (distributor) missing, • functionality has not been verified – the machine has not been tested, • stored in a warehouse for an extended period, • the machine is suitable for reconditioning, commissioning, or as a source of spare parts.

Year of construction: 2004, condition: used, 2004 Design Environmental FS5250-25S Environmental Chamber with Digital Control Gusdpfszty Aiox Aafsf Ambient Temperature Range 10°-27°. Ambient Humidity Range 10%-80%. Refigerant R404A. Chamber Dimensions Approx 1,750mm x 1,500mm x 2,000mm High. With Stand Alone Compressor. S/No. A3254. Dimensions of Machine Approx 2,700mm x 1,700mm x 2,400mm. Power Supply 415 Volt, 21.9 Amp.

Year of construction: 2007, condition: used, Free-running crate transport system for a reusable glass bottle filling line. The system consists mainly of motorised chain conveyors, with some roller conveyors as well. Both straight and curved conveyor sections are included. Additional title: Crate conveyor system comprising motorised conveyor chains Capacity bottle filling line: 12000 bo/h Current: 63 A Voltage: 400 V Frequency: 50 Hz Operation / Control: Simatic S7-300 Gjdpfx Aajztyzfsfouf

Condition: used, Cleaning-in-place system, completely mounted on a frame. The system consists of the following components: - 2 rectangular CIP tanks with hinged lids, each equipped with a heating coil. Gross capacity approx. 750 l and 500 l respectively. - Self-priming centrifugal pump (INOXPA, 2001, 3 kW, 15 m³/h) as CIP feed pump. - Control cabinet in housing with button panel - Various pipes, valves, actuators and sensors Additional title: Cleaning system with 2 containers Volume container 1 appr.: 750 l Gusdpjztywmjfx Aafjf Volume container 2 appr.: 500 l Length: 2,20 m Width: 1,60 m Height: 1,60 m Material: CIP containers from stainless steel Base construction: mounted on frame Features: 2 CIP containers, each with heating coil; CIP feed pump; various piping; actuators; sensors; control cabinet; frame

Year of construction: 2000, condition: used, Conveyor belts for glass bottles, with 2 pressureless merges Transport with 1, 3 or 4 conveyor belts Capacity: 30,000 bottles/hour Manufacturer: Krones Year of manufacture: 2000 Additional title: Section up to filler Capacity appr.: 33000 bo/h Conveyor belt widths: 4 conveyor belts Formats: 0.33 l Vichy, 0.33 l Euro, 0.35 l lemonade, and 0.5 l NRW Operation / Control: Simatic S7-300 Material: mainly stainless steel Guedpfx Aeztyblsafsf Position: free standing Features: conveyor frames, deflection stations, drives, frequency controls, electrical switching devices, 2 pressureless bottle merges (17/9/7/5/3/1 and 12/7/3/1 belts), automatic belt lubrication

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 32/5, Rotary screen S = 1.5 P = 0.55 kW Guodpfx Aeztxw Soafof N = 9 rpm Weight: 450 kg Dimensions: 630 x 1500

Year of construction: 2018, operating hours: 10 h, condition: good (used), functionality: fully functional, Subject: RZ125-315 pump with diffuser, impeller for water with blades - Pump operating parameters: Q = 80-150 m³/h H = 14.7-12.5 m - Material: cast iron, grade ŻL250 - Sealing: rope seal - With 3SIE160L-6 motor, 11 kW, 960 rpm, 400V 2. Quantity: 2 pcs. Gujdpeztxvnofx Aafsf