Montano Industrial Solutions

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 220 mm, travel distance Z-axis: 650 mm, number of axes: 3, This DMG NEF 400 was manufactured in 2006. It features a maximum spindle speed of 4000 RPM and includes a 12-station tool turret for efficient tool management. The machine is equipped with a manual tailstock and a 3-jaw chuck for versatile clamping. If you are looking to get high-quality turning capabilities, consider the DMG NEF 400 horizontal turning machine we have for sale. Contact us for further details. Cedpfx Ae Ah Sh Tsp Dohd - Number of Controlled Axes: 3 axes (X, Z, C) - Swing Diameter: - Over Bed: approx. 400 mm - Over Cross Slide: approx. 230 mm - Turning Diameter (max.): approx. 200 - 250 mm - Rotary Axis: C-Axis (main spindle indexing / positioning) - Control Unit: Heidenhain EP 4290 TP (Heidenhain Plus panel) - Spindle Speed (max.): 4000 RPM - Apparent Power: 21 kVA - Nominal Current (Jn max): 31 A - Fuse / Total Current: 35 A / FN1 - Operating Voltage: 400 V (50 Hz) - Control Voltage: 230 V / 24 V- Tool Carrier: 12-station tool turret (VDI 30 / VDI 40) - Clamping Device: 3-jaw manual/hydraulic chuck installed Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2017, operating hours: 7,349 h, turning length: 800 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, spindle motor power: 25 W, overall weight: 8,800 kg, Year of construction: 2017 CNC controller: Fanuc FS31iB (MAPPS IVS) Capacity Turning length mm: 800 Max. turning diameter mm: ø 320 Bar work capacity mm: 65 Upper turret X-axis travel mm: 210 Y-axis travel mm: 110 Z-axis travel mm: 810 Number of tool slots St .: 16 Speed ​​driven tools RPM: 6000 Lower turret X-axis travel mm: 210 Z-axis travel mm: 810 Number of tool slots St .: 16 Speed ​​driven tools RPM: 6000 Main spindle Speed ​​spindle rpm: 5000 Drive power spindle kW: 25/22 Spindle bore mm: 73 Chuck type: 8" Manufacturer: KITAGAWA Counter spindle Speed ​​spindle rpm: 5000 Drive power spindle kW: 25/22 Spindle bore mm: 73 Chuck type: 8" Manufacturer: KITAGAWA Coolant system High-pressure bar: 10 Equipment Chip conveyor Mist collector Chuck foot switch (double) for main and counter spindle Program restart Synchronized tapping Paper band filter Automatic door Codpfj Ah Iq Rox Ap Dehd Robot Automation interface Messenger V4 Working time hours Under power: 7349 Spindle 1: 1370 Rated power kVA: 94 Basic machine dimensions / weight Weight kg: 8800

Condition: good (used), Year of construction: 2011, functionality: fully functional, DMG Gildemeister CNC turning machine MSL 42|7 Year of manufacture: 2011 TECHNICAL DETAILS - Control system: Fanuc 31i Cedpfe Ah Hk Nsx Ap Dshd - Spindle bore: 46 mm - Max. bar diameter: 42 mm - Main spindle speed (max.): 5,000 rpm - Tool holder positions: 6 - Machine weight: 3,500 kg Bar feeder FMB Turbo 5-55 / 3200 / A Year of manufacture: 2008 Bar diameter: 5 - 55 mm Bar length: 3200 mm Accessories: - FMB bar feeder Turbo 5-55 (bar length up to 3,200 mm) - KSS coolant supply / cooling unit - Chip conveyor

Condition: used, Year of construction: 1997, Index ABC Turning Machine, Main spindle, Bar capacity: max. 52 mm, Main spindle speed: max. 5,000rpm, Main spindle power: up to 20 kW C-axis: available, Sub-spindle, Sub-spindle speed: max. 4,500 rpm, Sub-spindle clamping diameter: max. 42mm, Turrets and live tooling, Turret 1:8 tool stations, Turret 2:6 tool stations, Linear tool carrier: max. 6 tools, Live tool speed: max. 6,000rpm, Live tool drive power: 3.3 kW, Rapid traverse: up to 24m/min, Coolant tank: 210 l, Hydraulic pressure: 90 bar, Dimensions & weight, Machine height: 1,750mm, Footprint: approx. 2.4 m², Machine weight: approx. 2,500kg, Synchronous/sub-spindle, Live tooling, Bar feeder up to Ø 52mm, Chip conveyor, Workpiece discharge via conveyor belt. S/No. 400733 (1997). Country of Origin: Germany Location: These lots are located in Leicester and Coventry, UK. Please see individual lot for dismantling and loading charges. Cedpfx Ape Ah Hb Ss Dohd

Condition: used, Year of construction: 2002, functionality: fully functional, overall weight: 2,200 kg, Equipment: documentation/manual, # TAKAMAZ SX-07 CNC lathe with FMB bar feeder – manufactured in 2002 For sale is a CNC lathe from the Japanese manufacturer TAKAMAZ, model SX-07, manufactured in 2002. The machine was fully functional until it was decommissioned and was subsequently professionally dismantled and stored. The complete system will be sold including the bar feeder magazine, chip conveyor, extraction system, and accessories. ## Technical data - Manufacturer: TAKAMAZ / Takamatsu Machinery - Model: SX-07 - Year of manufacture: 2002 - Control: FANUC Series 21i-T - Serial number: 940011 - Machine weight: 2,200 kg according to the nameplate - Tool turret - Main and counter spindle Csdpfxs Ah Eite Ap Dshd ## Operating data according to the control system - Control system switched on: 95,815 hours - Feed time: 23,599 hours - Total part counter: 8,324,144 pieces ## Equipment - FMB Turbo 3-26 bar feeder magazine (year of manufacture unknown) - Chip conveyor - Extraction system - Various tool holders and accessories as shown in the pictures - Operating manual available ## Condition and inspection The machine was fully functional until it was dismantled. It has already been dismantled and stored, but can be powered up for inspection. A complete machining demonstration cannot be guaranteed in the stored condition. Inspection is possible after prior appointment. Sale from warehouse. Loading and transport by arrangement.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 5800-0001, RECENT OVERHAUL OF SPINDLES AND SLIDES - IEMCA BOSS 432/32 - MACHINE TO BE DELIVERED; MORE PHOTOS TO FOLLOW SOON. Chodpe Ahyryjfx Ap Dsd

Condition: good (used), Year of construction: 1998, In good technical condition and fully functional. Year of manufacture: 1998 Bar diameter: 42 mm Max. main spindle speed: 7,000 rpm Main spindle power: 13 kW Number of tool stations: 7 + synchronized counter-spindle Axis travels: X: 90 mm Z: 280 mm Rapid traverse: Chedpfx Apo Ahm Ate Ded X: 27 m/min Z: 36 m/min Automatic bar feeder INDEX LMI, year 1998 + accessories. Bar length: 3.2 / 3.7 / 4.2 m Machine weight: approx. 2,500 kg

Condition: used, Year of construction: 2013, turning diameter max. 20 mm turning length max. 80 mm control Fanuc 310is max. usable bar diameter 20 (25) mm inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C1: 360 ° inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C2: 360 ° x-axis 1: 50 / 2: 240 mm y-axis 1: 350 / 2: 120 mm z-axis 1: 80 / 2: 300 mm number of toolpositions 17 pos. inner processing 6 pos. outer processing 6 pos. driven statition 5 pos. Shank diameter 20 mm shaft cross cut 12 x 12 mm collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0.98 kW max. Torque 3x 4 / 2x 2,3 Nm number of toolpositions 13 pos. inner processing 4 outer processing 4 driven statition 5 pos Shank diameter 20 mm shaft cross cut 12 x 12 collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0,98 kW max. Torque 3x 4 / 2x 2,3 Nm rapid traverse ( X / Y / Z ) max. 40 m/min feed power max. 2,5 kN Accelaration max. 5 m/s² Codpfxs Ahkfyj Ap Dohd total power requirement 56 kVA weight of the machine ca. 4,8 t dimensions of the machine ca. 8,0 x 2,5 x 2,0 m CNC-Short-Lathe GILDEMEISTER - Sprint 20-8 - 8 Achsen ( 2x X / 2x Y / 2x Z / 2x C ) - Main- and Subspindle - Bar-Feeding-Magazine FMB turbo 3-36/ 3200A - Coolant System DELTATHERM

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,940 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,000 mm, spindle motor power: 11,000 W, total height: 2,022 mm, total width: 1,953 mm, overall weight: 3,000 kg, controller manufacturer: FAGOR, controller model: 8055i FL, product length (max.): 4,177 mm, number of axes: 2, Horizontal turning machine manufactured in 2015. This Challenger BNC-1840 (Microturn series) features a robust Fagor CNC control with a manual/power chuck and a disc turret tooling system. It has a machine weight of 3000 kg and is equipped with dual manual electronic handwheels for precise control. If you are looking to get high-quality turning capabilities, consider the Challenger BNC-1840 machine we have for sale. Contact us for further details. - CNC Control: FAGOR 8055i FL (with graphic cycle simulation and Microturn operator interface)- Part Counter: 264- Center Height: 230 mm- Max Turning Length: 1,000 mm- Swing Over Bed: 475 mm- Spindle Speeds: 100 - 4,500 rpm- Spindle Nose Mount: D 1-6 CAMLOCK (direct mount DIN 55029/6)- AC Spindle Motor Power: 7.5 / 11 kW- Drive Power (Total Connected Load): 20 kVA- Nominal Operating Voltage: 400 V- Frequency: 50 Hz- Phase Count: 3 + PE- Full Load Current: 52 A- Max Load Current: 320 A- Short Circuit Protection: 25 kA- Tool Turret: BARUFFALDI TB 160, VDI 40 automatic 8-station tool turret with internal coolant supply (installed in place of standard manual quick-change tool post)- Chuck: SCHUNK ROTA-S-PLUS 250-62/3 (3-jaw wedge bar chuck, Ø 250 mm, 62 mm spindle bore passage) with base jaws and hard reversible top jaws- Tailstock: Manual quill tailstock with clamping lever- Machine Dimensions (L x W x H): 3,030 mm (without chip conveyor) / 4,177 mm (with chip conveyor) x 1,953 mm x 2,022 mm- Optional Equipment: Movable control panel; electronic handwheels (2 manual on apron and 1 portable); heat exchanger; automatic lubrication for headstock, longitudinal, and cross slides; high-pressure coolant system; halogen work lamp; full machine enclosure; Pilz safety relays; Fagor servo drives Codpe Ahhc Dofx Ap Dehd Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2011, operating hours: 48,000 h, machine/vehicle number: IntNr231180, DMG Gildemeister CNC Multi-Slide Automatic Turning Machine MSL 60/7 Year of manufacture: 2011 Machine on-time: 56,000 hours Automatic cycle hours: 48,000 hours CNC control: FANUC 31i – Model A, 7 axes Cjdpfx Apj Ahfbao Djhd Technical specifications - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 60 mm - Spindle speed: 5,000 rpm - Spindle drive power: 7.5 kW COUNTER SPINDLE (on turret) - Max. bar diameter: 42 / (60) mm - Spindle speed: 5,000 rpm - Spindle drive power: 3.7 kW Driven tools (turret): - Tool drive power: 3.7 kW - Max. speed: 6,000 rpm Back-side machining: - 4 fixed tool stations - Capacity for up to 14 tools possible Bar feeder: FMB Turbo 5-55 / 3200 / A Year of manufacture: 2008 Bar diameter: 5 – 55 mm Bar length: 3,200 mm Chip conveyor included Machine can be inspected under power by appointment. Technical data, details, and prior sale subject to change and error.

Condition: used, Year of construction: 1994, functionality: fully functional, turning diameter: 42 mm, Equipment: documentation/manual, For sale: Index GB30 automatic lathe, manufactured in 1994. - The machine is in normal working order. - E173 collets - Drive for powered tools at three rear stations - Attachment for producing hexagonal shapes at position Q1 Csdpfs Ahdwaex Ap Dohd - LNS MINI SPRINT bar feeder

Condition: ready for operation (used), Year of construction: 1996, operating hours: 5,736 h, travel distance X-axis: 100 mm, travel distance Z-axis: 290 mm, overall weight: 2,600 kg, controller manufacturer: MAZATROL, controller model: T PLUS, number of slots in tool magazine: 8, number of axes: 2, CNC Lathe manufactured in 1996. This Mazak Quick Turn 10 features a maximum turning diameter of 160 mm and a turning length of 256 mm. It is equipped with a robust 8-station drum turret and a main spindle speed of up to 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn 10 machine we have for sale. Contact us for further details. - Model Designation: Quick Turn 10 (Nameplate: QTN-10)- Year of Construction: 1996- Control Unit: Mazak MAZATROL T PLUS- Total Operating Hours (Gesamt / Betr. Zeit): 26,800 h 00 m 35 s- Automatic Machining Hours (Aut. Zers.): 9,151 h 11 m 30 s- Automatic Cycle Time (Aut. Abla.): 9,369 h 25 m 11 s- Pure Cutting Time (Rei. Zers.): 5,736 h 15 m 38 s- Max. Turning Diameter: 160 mm- Circumferential / Swing Diameter: 300 mm- Turning Length: 256 mm (Z-travel 290 mm)- Tool Turret: 1 Turret, 8-station drum turret- Tool Clamping: Block holder, shank 20 x 20 mm- Main Spindle Speed: Up to 6,000 rpm- Spindle Nose: A2-5- Spindle Bore: 50 mm- Drive Power: 7.5 kW- Bar Capacity: Ø 42 mm (Standard chuck 6" / 165 mm)- Tailstock: None visible / to be confirmed on inspection (optional MK 4) Technical Specification Counter Spindle No Csdpfx As Agvl Tep Djhd Driven Tools No

Condition: good (used), Year of construction: 1997, operating hours: 33,000 h, functionality: fully functional, machine/vehicle number: 323, turning diameter over cross slide: 200 mm, turning length: 950 mm, turning diameter: 410 mm, spindle bore: 54 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 950 mm, spindle motor power: 7,500 W, rotational speed (min.): 1 rpm, rotational speed (max.): 3,000 rpm, total height: 1,700 mm, total length: 2,300 mm, total width: 1,400 mm, quill travel distance: 120 mm, quill diameter: 65 mm, quill stroke: 120 mm, swing diameter over cross slide: 200 mm, feed rate Z-axis: 10 m/min, turning diameter over bed slide: 410 mm, turning diameter over top slide: 200 mm, type of input current: three-phase, torque: 700 Nm, overall weight: 2,100 kg, swing diameter over bed slide: 410 mm, bar passage: 54 mm, swing diameter over top slide: 200 mm, spindle nose: DIN 55027 Size 6 type, center height: 200 mm, bar diameter (max.): 54 mm, travel distance cross slide: 230 mm, Equipment: rotational speed infinitely variable, 1997 Weiler E35 Cycle-Controlled CNC Lathe Used 1997 Weiler E35 CNC / Cycle-Controlled Lathe for Sale – Weiler D1 Control – 410mm Swing – 54mm Spindle Bore – 3,000rpm – 10 Tool Holders Manufacturer: Weiler Model: E 35 Machine Type: CnC Lathe Year: 1997 Condition: Working Well Machine Description The Weiler E35 is a high-quality German-built precision lathe combining the flexibility of a conventional centre lathe with the productivity of CNC/cycle-controlled machining. This machine is equipped with the Weiler digital conversational cycle control, allowing straightforward manual machining as well as programmed turning cycles for repeat work, tapers, radii and other common turning operations. With approximately 410mm swing over the bed, 54mm spindle bore and spindle speeds up to 3,000rpm, the E35 is particularly well suited to precision engineering, toolroom work, maintenance departments, repair work and small-to-medium batch production. The machine has approximately 33,000 power-on hours and is supplied with 10 quick-change toolpost holders. Chjdpfxe Agu A Sj Ap Djd Main Specifications Manufacturer: Weiler Werkzeugmaschinen Model: E35 Year: 1997 Serial Number: 323 Machine Type: Cycle-Controlled / CNC Centre Lathe Control: Weiler Digital Cycle Control / D1-type control Power-On Hours: Approx. 33,000 hours Turning Capacity Swing Over Bed: 410mm Swing Over Cross Slide: 200mm Centre Height: 200mm Spindle Bore: 54mm Maximum Chuck Diameter: 250mm Faceplate Diameter: 355mm Distance Between Centres: 950mm Spindle Spindle Speed Range: 1–3,000rpm Spindle Power: 7.5kW Maximum Spindle Torque: 700Nm Spindle Bore: 54mm Spindle Internal Taper: MT6 Spindle Nose: DIN 55027 Size 6 type The combination of a 54mm spindle bore and substantial torque makes the E35 suitable for both precision finishing and heavier general turning work. Weiler Cycle Control The machine is fitted with the Weiler conversational cycle control, designed to make CNC turning accessible without requiring full conventional G-code programming for every job. The control provides functions for operations such as: Straight turning Facing Taper turning Radius turning Threading Positioning Feed control Spindle speed control Repetitive machining cycles Manual machine operation Conversational cycle programming This type of control makes the E35 particularly attractive to toolrooms and general engineering workshops where both one-off components and repeat batches are produced. Feed & Axis Performance Longitudinal Feed Range: 0.001–20mm/rev Cross Feed Range: 0.001–20mm/rev Longitudinal Rapid Traverse: 10m/min Cross Rapid Traverse: 5m/min Cross Travel: 230mm Tailstock Tailstock Taper: MT4 Tailstock Quill Diameter: 65mm Tailstock Quill Stroke: 120mm The tailstock allows the machine to support longer workpieces and carry out drilling, reaming and centre-working operations. Tooling Included The machine is supplied with: 10 quick-change toolpost holders Electrical Specification Operating Voltage: 400V Frequency: 50Hz Connected Load: 10kW Nominal Current: 18A Control Voltage: 24 / 230V Approximate Machine Dimensions Overall Length: 2,300mm Overall Width: 1,400mm Overall Height: 1,700mm Machine Weight: 2,100kg Please Note: All specifications, dimensions, capacities, speeds and machine details quoted above are approximate and are provided for guidance only.

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 3,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, spindle motor power: 22,400 W, overall weight: 6,804 kg, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2007. This HAAS SL-30THE features a maximum cutting diameter of 432 mm and a cutting length of 864 mm. It includes a spindle bore of 88.9 mm and a maximum speed of 3400 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS SL-30THE machine we have for sale. Contact us for further details. • Max. swing over front cover: 762 mm • Max. swing over cross slide: 381 mm • Max. cutting diameter: 432 mm • Max. cutting length: 864 mm • Spindle bore: 88.9 mm • Max. torque: 407 Nm @ 700 rpm • Spindle nose (Standard): A2-6 • Feedrate rapids X axis: 18.0 m/min • Feedrate rapids Z axis: 18.0 m/min • Outside/inside turning tool size: 25 mm • Bore size for turning tools: 50 mm • Tool change time (adjacent tool): 1 second • Tool change time (opposite tool): 3 seconds • Electrical supply / Power requirement: 28 kVA • Voltage: 380 V 3-phase Chjdpfxe Agnvvo Ap Dod • Air requirement: 113 l/min @ 6.9 bar • Coolant tank capacity: 189 l Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 240 mm, travel distance Z-axis: 950 mm, number of axes: 3, This 2-axis SOMAB OPTIMA 450 was manufactured in 2007. It features an X-axis travel of 240 mm and a Z-axis travel of 950 mm, along with a 12-position VDI 30 turret. If you are looking to get high-quality turning capabilities, consider the SOMAB OPTIMA 450 horizontal turning machine we have for sale. Contact us for further details. Technical Specification Codpfj Agk R Aex Ap Dohd Taper Size VDI 30 Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, type of input current: three-phase, We are offering a used Haas DS-30Y CNC turning machine, manufactured in 2022. Manufacturer: Haas Machine type: CNC turning machine Model: DS-30Y Year of manufacture: 2022 Cjdpfo Af Un Sox Ap Dehd Supply voltage: 440 V Phases: 3 Frequency: 50/60 Hz Full-load current: 35 A Short-circuit interrupting capacity: 10,000 A Enclosure type: NEMA Type 2, for indoor use only If you have any questions or require further information, please feel free to send us a message or call us.

Condition: repair required (used), Year of construction: 2000, functionality: limited functionality, machine/vehicle number: 1130000731, spindle bore: 38 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 628 mm, travel distance Z-axis: 175 mm, spindle motor power: 7,000 W, total height: 1,790 mm, total length: 1,600 mm, total width: 947 mm, type of input current: three-phase, overall weight: 1,250 kg, Equipment: documentation/manual, Machine for processing feed components with individual part feeding via a vibrating conveyor and a loading arm. Although the machine is still operational, it would need to be overhauled or can be used as a source of spare parts. The machine is being sold including the feeder and chip conveyor. This machine was taken out of service approximately one year ago. Chsdpj Af Ryyofx Ap Dod

Condition: repair required (used), Year of construction: 2000, functionality: limited functionality, machine/vehicle number: 0130000741, spindle bore: 38 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 628 mm, travel distance Z-axis: 175 mm, spindle motor power: 7,000 W, total height: 1,790 mm, total length: 1,600 mm, total width: 947 mm, type of input current: three-phase, overall weight: 1,250 kg, Equipment: documentation/manual, Machine for processing feed components with individual part feeding via a vibratory conveyor and loading arm. The machine is still operational, but should be overhauled or can be used as a source of spare parts! The machine is being sold including the feeder and chip conveyor! This machine was taken out of service last month! Chjds Af Nc Ejpfx Ap Dsd

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 175 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 435 mm, Fanuc 18i-TB control Collet chuck device main spindle Collet chuck device sub spindle C-axis Y-axis 12-fold turret with driven tools chip conveyor bar loading device coolant device Technische Daten: / technical details max. Stangendurchlass / max. bar diameter 51 mm max. Drehdurchmesser / max. turning diameter 175 mm Verfahrweg X / travel X 175 mm Verfahrweg Z / travel Z 435 mm Chjds Af Ipkepfx Ap Ded Verfahrweg Y / travel Y +-40 mm max. Drehzahl / max. spindle speed 5000 UpM/rpm Anzahl der Revolverplätze / number of tool places 12 Eilgang X,Z,Y / rapid feed X,Z,Y 18,20,12 m/min Gewicht/weight 4550 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, turning length: 250 mm, turning diameter: 150 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 150 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 285 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 25 m/min, No minimum price – guaranteed sale to the highest bidder! Chsdpfo Afxtzjx Ap Djd TECHNICAL DETAILS Spindle motor power: 7.5 kW Spindle bore: 45 mm Spindle nose: A2-5 Spindle speed: min. 60 rpm Spindle speed: max. 6,000 rpm Turning diameter: 150 mm Turning length: 250 mm Chuck outer diameter: 203 mm Swinging diameter over cross slide: 150 mm Swinging diameter over compound slide: 250 mm X-axis travel: 150 mm Y-axis travel: 60 mm Z-axis travel: 285 mm Rapid traverse Z-axis: 25 m/min Rapid traverse X-axis: 20 m/min MACHINE DETAILS Input current type: Three-phase Dimensions and weight Dimensions (L x W x H): approx. 2,000 x 1,700 x 2,000 mm Machine weight: approx. 4,000 kg EQUIPMENT Documentation/Manual

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 10,000 rpm, travel distance X-axis: 108 mm, travel distance Y-axis: 104 mm, travel distance Z-axis: 140 mm, spindle motor power: 3,700 W, total height: 1,597 mm, total width: 837 mm, overall weight: 1,150 kg, controller manufacturer: FANUC, product length (max.): 1,622 mm, number of axes: 4, This 4-axis Citizen Cincom B16 was manufactured in 2013. It features a maximum machining diameter of Ø16 mm and a maximum machining length of 135 mm. The machine includes a main spindle speed range of 200–10,000 rpm and a counter spindle with a maximum chucking diameter of Ø16 mm. If you are looking to get high-quality turning capabilities, consider the Citizen Cincom B16 horizontal turning machine we have for sale. Contact us for further details. Machining capacity • Maximum machining diameter: Ø16 mm • Maximum machining length: 135 mm • Main spindle through-hole diameter: Ø20 mm • Maximum front drilling diameter: Ø6 mm • Maximum front tapping: M6Travels • A2/back-spindle axis travel: 200 mmRapid feeds • X-axis: 21 m/min • Y-axis: 21 m/min • Z-axis: 15 m/min • A2-axis: 15 m/minMain spindle • Speed range: 200–10,000 rpm • Maximum speed with rotary guide bushing: 8,000 rpm • Motor: 2.2 / 3.7 kWCounter spindle (back spindle) • Maximum chucking diameter: Ø16 mm • Speed range: 100–6,000 rpm • Maximum drilling diameter: Ø5 mm • Maximum tapping: M3 • Motor power: 1.0 kWDriven tooling • Maximum drilling diameter: Ø5 mm • Maximum tapping: M4 • Tool spindle speed: 100–4,500 rpm • Drive motor: 0.5 kWTooling • Total mountable tools: 15 • Cutting tools: 5 • Secondary machining tools: 2 • Front drilling tools: 4 • Back drilling tools: 4General • Input power capacity: 5.2 kVAUnits available and hours • Unit 1 • Manufacture date: 05/2013 • Power On: approx. 82,600 h • Run Time: approx. 31,847 h • Cutting Time: approx. 22,613 h • Unit 2 • Manufacture date: 06/2013 • Power On: approx. 81,474 h • Run Time: approx. 31,403 h • Cutting Time: approx. 20,127 h Additional equipment • Bar feeder: FMB Minimag 20 / 3200 C Csdpfx Ae Afxqqsp Dshd • Unit 1 bar feeder year: 2014 • Unit 2 bar feeder year: 2013 Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, spindle speed (max.): 5,000 rpm, bar diameter (max.): 52 mm, counter spindle speed (max.): 4,500 rpm, TECHNICAL DETAILS Main spindle Bar diameter: max. 52 mm Main spindle speed: max. 5,000 rpm Main spindle power: up to 20 kW C-axis: available Counter spindle Counter spindle speed: max. 4,500 rpm Counter spindle clamping diameter: max. 42 mm Tool turret and tool drive Turret 1: 8 tool stations Turret 2: 6 tool stations Linear tool carrier: max. 6 tools Speed of driven tools: max. 6,000 rpm Tool drive power: 3.3 kW Rapid traverse: up to 24 m/min MACHINE DETAILS Coolant tank: 210 l Hydraulic pressure: 90 bar Dimensions & Weight Machine height: 1,750 mm Footprint: approx. 2.4 m² Machine weight: approx. 2,500 kg Cheds Afwtzepfx Ap Djd EQUIPMENT Synchronous/counter spindle Driven tools Bar loader up to Ø 52 mm Chip conveyor Workpiece removal via conveyor belt

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 3,500 rpm, travel distance X-axis: 275 mm, travel distance Z-axis: 820 mm, spindle motor power: 22,000 W, total height: 2,330 mm, total width: 2,230 mm, overall weight: 7,500 kg, controller manufacturer: FANUC, controller model: Series 21i-T, product length (max.): 4,950 mm, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2000. This ZPS S-60 CNC features a maximum machining diameter of 430 mm and a maximum machining length of 750 mm. It offers X/Z-axis travel of 275/820 mm and a spindle speed range of 20 to 3,500 rpm. If you are looking to get high-quality turning capabilities, consider the ZPS S-60 CNC machine we have for sale. Contact us for further details. • Maximum swing over bed: 680 mm • Maximum machining diameter: 430 mm • Maximum machining length: 750 mm • Maximum bar capacity: 65 mm • Spindle bore: 80 mm Csdpfx Apo Afm Utj Dohd • Turret: Duplomatic, 12 positions • Dimensions (L × W × H) excluding chip conveyor: 3,280 × 2,230 × 2,330 mm • Service/maintenance: Regularly serviced and maintained Additional equipment • Tool holders • Clamping jaws • Other accessories (unspecified) Technical Specification Taper Size VDI 50 Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 6,000 rpm, travel distance X-axis: 135 mm, travel distance Z-axis: 235 mm, spindle motor power: 7,500 W, total height: 1,660 mm, total width: 2,150 mm, overall weight: 2,800 kg, controller manufacturer: FANUC, controller model: Series Oi-TD, product length (max.): 2,190 mm, number of slots in tool magazine: 8, number of axes: 3, This 3-axis Miyano BNA42S2 was manufactured in 2018. It features a maximum bar machining diameter of ø42 mm and a spindle speed range of 60 – 6,000 min⁻¹. The machine includes an 8-station turret capable of live tools and a maximum machining length of 100 mm. If you are looking to get high-quality turning capabilities, consider the Miyano BNA42S2 horizontal turning machine we have for sale. Contact us for further details. Main Drive • Number of spindles: 2 • Spindle motor power: Main spindle: 7.5 / 5.5 kW; Sub-spindle: 5.5 / 3.7 kW • Spindle speed range: Main spindle: 60 – 6,000 min⁻¹; Sub-spindle: 50 – 5,000 min⁻¹Movement • B-Axis: 310 mmTurret • Number of tool slots: 8 • Rotating tools: All positions capable of live/revolving tools with half-indexingMedia • Main electronic connection: 28 KVA (100 A fuse) Cjdpfx Ao Afkytsp Dohd • Cooling pressure: Coolant tank capacity: 165 LExtra Information • Maximum bar machining diameter: Main spindle ø42 mm (1.65 in); Sub-spindle ø34 mm • Power chuck: 5 inches • C-axis control and rigid tapping included on main spindle • C-axis control included on sub-spindle • Maximum machining length: 100 mm • Live tool motor: 2.8 / 1.0 kW • Live tool speed: Up to 5,000 min⁻¹ • Turning tool shank height: Square tool □20 mm • Drill shank diameter: ø25 mm (1 in) • B-axis is specified as Z2-axis stroke for pick-off and back machining Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 4,000 rpm, travel distance X-axis: 250 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 350 mm, spindle motor power: 7,500 W, number of axes: 4, This 4-axis Quick-Tech XTS-42 CNC Lathe was manufactured in 2013. It features a twin-spindle configuration with a maximum machining length of 350 mm on the main spindle and a turning diameter of 100 mm on the sub-spindle. The machine is equipped with a Mitsubishi M70 control and has a bar capacity of 42 mm. If you are looking to get high-quality turning capabilities, consider the Quick-Tech XTS-42 machine we have for sale. Contact us for further details. • Number of spindles: 2 • Spindle motor power: Main spindle: 7.5 kW; Sub-spindle: 3.7 kW • Spindle bore: Main spindle: 44 mm; Sub-spindle: 30 mmMovement • B-Axis: Present, according to seller description Codpfx As Afi E Iep Dehd • Others: Z1-axis: 470 mmExtra Information • Bar capacity: 42 mm • Main spindle max. machining length: 350 mm • Main spindle chuck: Patron KK5-173E/42B • Main spindle nose: ISO A2-5 • Sub-spindle bar capacity: 42 mm • Sub-spindle max. machining length: 155 mm • Sub-spindle max. turning diameter: 100 mm • Sub-spindle chuck: Patron KK5-173E/42B • Sub-spindle nose: ISO A2-5 • X / Y / Z / Z1 servo motors: Mitsubishi, 1 kW • Technical specification available as attachment • Preliminary evaluation requested • Still missing / useful to request before publication: Serial number • Still missing / useful to request before publication: Exact machine location • Still missing / useful to request before publication: Operating hours / spindle hours • Still missing / useful to request before publication: Confirmation machine is fully operational • Still missing / useful to request before publication: Whether machine is under power and can be demonstrated • Still missing / useful to request before publication: Number of axes / exact B-axis configuration • Still missing / useful to request before publication: Driven tools / live tooling • Still missing / useful to request before publication: Tooling configuration / number of tool stations • Still missing / useful to request before publication: Bar feeder included or not • Still missing / useful to request before publication: Chip conveyor • Still missing / useful to request before publication: Additional accessories • Still missing / useful to request before publication: Recent photos • Still missing / useful to request before publication: Nameplate photo • Still missing / useful to request before publication: Video under power • Still missing / useful to request before publication: Maintenance / repair history • Still missing / useful to request before publication: Any active alarms or known technical issues Technical Specification Counter Spindle Yes Driven Tools Yes