Thomas Wieland Automobile GmbH

Condition: excellent (used), functionality: fully functional, power: 39.9 kW (54.25 HP), input current: 56 A, temperature: 450 °C, inner dimension length: 1,000 mm, inner dimension width: 1,500 mm, inner dimension height: 1,000 mm, total length: 1,900 mm, total width: 2,500 mm, total height: 1,600 mm, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, Chamber oven, make: Nabertherm type: N 1500/45 HA Itodpfxozd Sd To Aa Ish electrical heated max. temperature: 450°C internal dimensions (w x d x h): 500 x 1000 x 1000 mm external dimensions (w x d x h): 2500 x 1900 x 1600 mm circulation rate: 3600 m3/h gas inlet pressure: max. 25 bar gas outlet pressure: 0,2 / 2 bar nitrogen: 0,3 / 12 m3/h input frequency: 50 Hz input current: 56,3 A power: 39,9 kW

Condition: good (used), Year of construction: 2008, machine/vehicle number: 200415, Offer 26150 Iedpfx Aajzd Rq Ee Isth Technical data: - Nominal temperature / continuous temperature, steplessly adjustable up to 1280 °C - Three-sided heating (bottom + sides) - Temperature control via NABERTHERM controller C 30 - Drive: 400 V / 3.6 kW - Internal dimensions approx.: W 250 x H 140 x D 350 mm - Usable volume: 11 L - Space requirement approx.: W 800 x H 600 x D 750 mm - Weight approx.: 80 kg

Condition: excellent (used), Here we offer you a chamber dryer. External dimensions approx.: Width: 1,885 mm Depth: 1,200 mm Height: 2,425 mm Internal dimensions approx.: Itedpfjzdzixex Aa Ish Width: 1,030 mm Depth: 1,000 mm Height: 2,100 mm Internal volume: 2.2 m³ Rated temperature: 100 °C Operating temperature: 85 °C Heating medium: 3 x 400 V, 50 Hz Heating power: 20 kW Air circulation rate: 4,500 m³/h / 400 Pa Motor power: 1.1 kW Protection class: IP 54 The chamber heating oven must not be used for flammable or explosive materials. The chamber heating oven must not be installed in an explosion-proof area. Continuous chain conveying system External dimensions: Height: 1,880 mm Width: 809 mm Depth: 950 mm Carrier bars: 13 pieces Pitch: 228 mm Carrier bar width: 354 mm Carrier bar depth: 320 mm Usable height: 135 mm Drive motor power: 0.25 kW at 189 Nm Transport speed: average 5 m/min. Load capacity/carrier bar: max. 10 kg Total load capacity: max. 130 kg Total weight when loaded: max. 730 kg Year of manufacture: 2005 Type: Ke/SO Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We will gladly answer any further questions you may have over the phone.

Condition: used, TECHNICAL DETAILS - Useful dimensions : 400 x 450 x 600 [mm] - Volume of the heating chamber : 96 [dm3] - Max. load : 250 [kg] - Max. temperature : 1400 [°C] - Max. operating temperature : 260 - 1350 [°C] - Maximum convection heating temperature : 750 [°C] - Heating time from 50°C to 1250°C : 60 [min] - Chamber cooling time from 1200°C to 200°C : 2 [min] PUMP UNIT - Mechanical primary pump : Drystar GV160 * Pumping speed : 160 [m3/h] * Power : 7.5 [kW] - Roots-type pump : Edwards EH1200 * Pumping speed : 500 [m3/h] * Power : 3 [kW] - Diffusion pump : Edwards HT16B * Pumping speed : 6.500 [l/s] * Power : 9 [kW] GAS - Cooling gas : Argon or Nitrogen - Power : 90 [kW] Water - Min. / max. pressure (inlet) : 2.5 / 3.0 [bars] - Min. / max. pressure (outlet) : 0 / 0.5 - Flow rate for heat exchanger during cooling phase : 400 [lpm] - Furnace chamber flow rate : 200 [lpm] - Max. inlet temperature : 30 [°C] - Max. inlet temperature (DP) : 25 [°C] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 120 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 4.682 x 4.356 [mm] - Machine height : 3.242 [mm] - Machine weight : 5000 [kg] - Vacuum level : 10-5 - Cooling pressure level : 11.5 bar abs Iedozdvluopfx Aa Ijth EQUIPMENT - CNC : Siemens S7 - Automatic loading robot - Cooling unit - 100 baskets

Condition: used, Year of construction: 1999, functionality: unexamined, input voltage: 380 V, input frequency: 50 Hz, temperature: 1,300 °C, number of chambers: 1, control type: PLC-controlled, fuel type: gas, Equipment: documentation/manual, No. 1 Industrial car furnace / USED, year 1999, for heat treatments on metals (tempering, annealing, normalizing, stress relieving, preheating, sintering), and for firing ceramics and porcelain. Type: STC2400 Maximum temperature: 1300°C Isdpfszclcuex Aa Ioth No. 1 motorized car No. 1 flap door Thermal power: 240,000 kcal/h Power supply: 400 V 3-phase + neutral + ground, 50 Hz Control panel type: ATR 313 No. 1 heat exchanger made of stainless steel Machine sold as is, where is.

Condition: like new (used), Year of construction: 2023, machine/vehicle number: N1000, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, input current: 108 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,340 °C, inner dimension length: 1,000 mm, inner dimension width: 800 mm, inner dimension height: 1,250 mm, total length: 1,850 mm, total width: 1,390 mm, total height: 2,140 mm, overall weight: 2,800 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, with 12 months warranty, -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm Iodpszbr U Uefx Aa Ieth -External dimensions (w x d x h): 1790 x 1900 x 2500 mm -Control cabinet (w x d x h): 1200 x 500 x 2350 mm -Control unit (w x d x h): 600 x 900 x 1850 mm -Volume: 1000 liters -Maximum temperature: 1340 °C -Siemens PLC control system H1700 (100 programs, each with 20 segments) with Nabertherm (NCC), computer-assisted, extremely user-friendly control system, as well as recording of all parameters; recordings can be processed, supplemented with batch data, archived, and printed. Printer and UPS integrated in the control unit. -Automatically generated report after each heating cycle -Thyristor-controlled -2 opposing, lockable doors with safety interlock -5-sided heating -Manual air inlet damper -Motorized exhaust damper -Stainless steel exhaust hood with pipe connection -Calibrated control thermocouples for the three heating zones -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the empty working chamber, without protocol -Separate control cabinet -Audible alarm and alarm light -Over-temperature limiter -Power: 75 kW -Oven weight approx. 2320 kg + control cabinet + control unit -DGUV V3 inspection current with protocol -Documentation, CE declaration, circuit diagrams The oven is in excellent condition. It has been used for approximately 10 months in a cleanroom for the production of implants and is of high quality (new price 100,000 EUR net). We would be happy to offer installation, commissioning, and training for your staff. Please contact us! We sell new and used industrial furnaces. Inspection in our warehouse on request! Chamber furnace, furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, normalizing furnace, enameling furnace, drying furnace, industrial furnace, ceramic furnace, tempering furnace, sintering furnace.

Condition: good (used), Year of construction: 1982, Oven, heating oven, heating chamber, heating cabinet, hardening oven, annealing oven -Manufacturer:Artur Nolzen, Chamber dryer oven type KTS 53/30/70 Itjdpjzbrx Hsfx Aa Ijh -Temperature: max. 1100 °C -Chamber size: 710 x 535 x 300 mm -Heating output: 25 kW -Automatic temperature control -Individual components: see photos -Dimensions: 1630/1530/H1700 mm -Weight: 1698 kg

Condition: used, Year of construction: 2018, functionality: fully functional, operating hours: 5,000 h, Continous Cast link belt Hardening & tempring furnace with online pre wash & post wash SCADA control fully automatic Ijdpfxjzbiqgo Aa Ijth

Condition: refurbished (used), functionality: fully functional, Batch furnace on trolley Manufacturer: Av Eujc Year of manufacture: 2007 Technical data: Batch weight: max. 15 t Usable dimensions: 3300 x 2200 x 1600 mm (L x W x H) Itodpfoza S Ewex Aa Ieh Operating temperature: max. 950 °C Temperature uniformity: +/- 10 °C at the end of the holding time 6 pulse burners "System Löcher" on the furnace door of the trolley including: Control cabinet and gas control system Turnkey, including installation, excluding freight

Condition: used, Year of construction: 2008, power: 27 kW (36.71 HP), input voltage: 400 V, input current: 44 A, temperature: 200 °C, inner dimension length: 1,100 mm, inner dimension width: 1,600 mm, inner dimension height: 1,500 mm, overall weight: 3,500 kg, number of chambers: 1, Equipment: CE marking, documentation/manual, Chamber oven Vötsch for components containing solvents Usable dimensions: 1600 x 1100 x 1500 mm (width x depth x height) Rated temperature: 200 °C Maximum temperature: 250 °C Maximum permissible solvent quantity according to EN 1539 at rated temperature: 38 g Connected load: 30 kVA Rated power: 27 kW Itodpfx Asy U Uzxja Ieh Usable volume: 2.78 m³ Steam space: 4.5 m³

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 830397, functionality: fully functional, power: 85 kW (115.57 HP), temperature: 1,000 °C, inner dimension length: 1,600 mm, inner dimension width: 700 mm, inner dimension height: 950 mm, The item is offered as a "Premium Listing" – the sale is qualified and curated by Maschinensucher. Used in a large German corporation, adhering to applicable guidelines and maintenance recommendations. ACQUISITION COSTS Original purchase price in 2008: €490,000 plus VAT Retrofit in 2022: €254,000 plus VAT TECHNICAL DETAILS Dimensions of the heat treatment unit Housing width, including control cabinet: 3,600 mm Overall length with attachments: 7,000 mm Height above furnace floor: 4,900 mm Loading height above furnace floor: 1,200 mm Pit depth: 630 mm Internal height of the furnace chamber: 950 mm Internal depth of the furnace chamber: 1,600 mm Internal width of the furnace chamber: 700 mm Temperatures Rated furnace temperature: 1,000 °C Operating furnace temperature: 850 °C Oil bath temperature: 60 °C Dimensions of the furnace control cabinet Width: 2,000 mm Isdey Uxt Eopfx Aa Ijth Depth: 600 mm Height with 100 mm base: 2,100 mm Weights and Volumes Weight of multi-purpose chamber furnace: 22,000 kg Oil bath volume: 7.5 m³ Weight of switchgear: 600 kg Total weight of furnace with oil and charge: 30,000 kg Energy Data Total connected load: 85 kVA Supply voltage: 400 V Supply frequency: 50 Hz Number of phases: 3 Oil bath heating: 2 x 21.6 kW Motor power, heating chamber circulation fan: 5.5 kW Motor power, pre-chamber circulation fan: 2.2 kW Motor power, oil bath air cooler: 3.0 kW Motor power, lifting table: 11 kW Motor power, loading machine: max. 38 kW Current draw, pre-chamber door: max. 17.2 A Current draw, heating chamber door: max. 13.2 A Motor power, combustion air fan: 1.5 kW Motor power, oil bath pump for oil bath: 2.2 kW Motor power, cooling air blower: 0.75 kW Motor power, oil bath circulation fan: 2 x max. 11 kW Motor power, oil bath pump for cooling plates: 1.1 kW Motor power, batch oil circulation pump: 3 kW Batch dimensions with base grate Height: 950 mm Width: 700 mm Length: 1,600 mm Weight: 1,000 kg Note: The dismantling and loading of the furnace must be organized by the buyer.

Condition: excellent (used), Max. operating temperature: 300°C Internal dimensions (W x H x D): 400 x 380 x 370 mm Internal volume: 57 liters Power consumption: 1.4 kW Electrical connection: 230 V Isdpfx Aajy Uwr Ho Ijth Footprint: 750 x 610 x 550 mm Approximate weight: 50 kg

Condition: excellent (used), Rated temperature: 1100°C Usable chamber dimensions (W x D x H): 200 x 300 x 150 mm Itsdpfx Aoy Uwqvea Ieh Electrical connection: 230 V, 1.4 kW Heating-up time: 100 min. Footprint: 752 x 576 x 700 mm Weight: 78 kg

Condition: excellent (used), functionality: fully functional, El. heated salt bath continuous furnace system, make Kohnle consisting of Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Itjdpfx Aoy Uuwmea Ieh Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system

Condition: excellent (used), El. heated salt bath continuous furnace system, make Kohnle consisting of Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Itsdpfxjy Uuu Es Aa Ieh Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system

Condition: excellent (used), El. heated continuous furnace system, make Safed consisting of: Magnetic feeder Hardening furnace Type: T 80/54 Ti Throughput: 540 kg/h Temperature: max. 950°C Conveyor belt: effective width 600 mm Effective height: 100 mm Heating power: 229 kW Heating length: 7.200 mm Temperature control zones: 9 Processing time: 15 - 150 minutes Gases used: nitrogen, methanol, ammonia, propane Oil quenching bath Liquid capacity: 4000 l Bath temperature: max. 80°C Isdey Ur Aaepfx Aa Ieth Washing system Annealing furnace

Condition: good (used), functionality: fully functional, Year of construction: 2017, Forced-circulation chamber ovens, electric, 12-month warranty, available for short-term delivery -Temperature 200°C, can be increased to 250°C! -Charging trolley, 5 units available, modification upon request -Fast heating times, short process times -Homogeneous temperature distribution of +/- 10°C -Internal dimensions (W x D x H): 3750 x 1400 x 2300 mm -External dimensions (W x D x H): 4850 x 1705 x 3880 mm -Usable volume: 11.6 m³ -Control system: S!MPAC with touch panel -Program execution with feeler as a cascade control -Temperature limiter -Signal column -Directly accessible, with grid rails -Exhaust air volume flow: 140 m³/min -Electromagnetic door lock -Rated power: 180 kW -Connection: 241 kW!! -Weight: approx. 3500 kg -Documentation, CE declaration of conformity We would be happy to offer transport, installation, and training for your employees. Itjdpsy Tkfwofx Aa Ioh Inspection in our machine hall is possible at any time by appointment. Oven, ovens, drying oven, industrial oven, drying cabinet, heat oven, heat cabinet, forced-circulation oven, chamber oven, heating oven, chamber forced-circulation oven, annealing oven, tempering oven, forced-circulation chamber oven, hardening oven, Vötsch oven, Weisstechnik, fusing oven, curing oven, post-curing of liquid crystal windows, CFRP support structure, oven for glass, glass tempering oven, glass fusing oven, glass hardening oven.

Condition: ready for operation (used), A retort furnace PFS Anlagenbau UG for gas nitriding, nitrocarburizing, and tempering is available. Load weight range: 750kg-6000kg, max. operating temperature: 750°C, treatment chamber dimensions X/Y/Z: 1800mm/900mm/900mm, number of burners: 4, burner type: recuperative, burner output: 4×80kW, loading height: 1200mm, max. evacuation temperature: 350°C, retort material: 1.4841, circulator air volume flow: 10000m³/h, nitriding system manufacturer: Process-Electronic, vacuum pump capacity: 240m³/h, total pressure: below 0.7mbar, max. operating pressure: 1.45bar. Documentation available. An on-site inspection is possible. Ijdpfx Aajy N Uxgs Ieth

Condition: used, Year of construction: 1996, machine/vehicle number: VKD5000G, power: 180 kW (244.73 HP), temperature: 1,120 °C, inner dimension length: 5,000 mm, inner dimension width: 550 mm, inner dimension height: 130 mm, number of chambers: 3, year of last overhaul: 2025, We offer a used WMU VKD5000G protective gas conveyor furnace (continuous belt furnace), year of manufacture 1996. The system is ideally suited for soldering and annealing stainless steel components. Technical data: Heated length: 5000 mm Number of heating zones: 3 Operating temperature: up to 1120 °C Usable width: 550 mm Usable height: 130 mm Heating power: 180 kW Protective gas: Hydrogen / Nitrogen The furnace was relined in 2025 and is equipped with an almost as-new furnace muffle. If you have any questions or require further information, please do not hesitate to contact us by phone or email at any time. Itjdpsy Nyqzsfx Aa Ioh

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, FOUR IPSEN 224 SOUS VIDE OVENS They have been thoroughly refurbished Model: VFC-224R Nitrogen tank Power: 40 kW Usable dimensions: 500 x 310 x 220 mm Ijdpfey Nnxtjx Aa Ijth Cooling pressure: 5 bars Located in Spain and available for inspection EXCEPTIONAL PRICE: €75,000 net EXW, loaded onto truck

Condition: ready for operation (used), Brand: HERAEUS Itsdpfjy Nlfdjx Aa Ioh Maximum temperature: 1200 °C Internal furnace dimensions: 390 x 200 mm, depth: 650 mm

Condition: used, Manufacturer: HERAEUS Model: RL 250 Ijdpfx Asy Nlcvea Isth Internal dimensions: Diameter: 315 mm Depth: 450 mm

Condition: excellent (used), Gas Cylinder Dryer / Infrared Heating Unit for Gas Bottles (Nitrogen, CO2 etc.) For sale is a professional gas cylinder drying unit with infrared heating, e.g. for nitrogen or other industrial gas cylinders. The system consists of a large insulated stainless‑steel drying cabinet with infrared heaters, a separate control cabinet and a loading ramp. Features / Equipment: Drying system for several gas cylinders at the same time (industrial design) Infrared heating with OSRAM THERATHERM 250 W emitters Insulated stainless‑steel housing with reflective inner lining Solid base frame with transport frame / rollers Separate electrical control cabinet including: Temperature controller Ammeters for heating circuits Hour counters (heating rods / lamps) Drying phase counter Push buttons incl.: bottle drying ON/OFF, Start/Stop, heating phase ON, vacuum/underpressure, valves, emptying, reset Main switch Upper pipe manifold with several gas / vacuum connections and valves Aluminium loading ramp for moving cylinders into the unit Ijdpfxsy Nkqxs Aa Ioth The unit was used in an industrial environment. If you are interested or need more details, please send me a message.

Condition: ready for operation (used), Year of construction: 1974, An industrial drying oven Biagosch & Brandau, which has been overhauled by Neitz, is available. Fuel: natural gas, calorific value: 7600kcal/Nm³, gas pressure: 200mm/Ws, fuel consumption: 2.75Nm³/h, operating temperature: 120°C, heating capacity: approx. 23.3kW/20000kcal/h. An on-site inspection is possible. Iodpfx Aasy Ndfvo Ijth

Condition: new, Year of construction: 2026, machine/vehicle number: PB-70/250-1000NC-2C, functionality: fully functional, power: 20 kW (27.19 HP), input frequency: 50 Hz, type of input current: three-phase, total length: 30,000 mm, total width: 5,000 mm, total height: 3,000 mm, overall weight: 10,500 kg, Equipment: CE marking, documentation/manual, Our welding and spacer bending line is a fully automatic system with PC control, designed for fast and precise production of reinforcement elements. It is equipped with 4 × 45 kVA transformers, 20 kW electric motors, and a 3 × 400 VAC, 50 Hz power supply. The machine processes longitudinal wire with a diameter of 3.5–5 mm and diagonal wire of 3.5–4 mm. It supports a 150 mm step, adjustable heights from 70 to 250 mm, spacer length of 2400 mm before bending and 2050 mm after bending, as well as simultaneous transformer activation to optimize the welding process. With a welding speed of 30 m/min, a weight of 10.5 t, and dimensions of 30 × 5 × 1.5/3 m, it enables efficient and reliable serial production. Iodpfxsy Iyygs Aa Ijth