VosTecME

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Bjdpfez Dhrqex Aa Ijdh Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Pressure 6 bar, Pump capacity 80 m3/h , el.mootor 18,5 kW, 1470 rpm, 34,7 A. Quantity 7 psc. Bdjdpfx Asz A Au Rja Ijh

Condition: excellent (used), Lambrechts Monobloc 80 Keg Filling Line Bsdpfx Ajz Ayh Rsa Iodh Built in CIP for internal and external wash Infeed Outfeed Conveyors

Year of construction: 2021, condition: excellent (used), functionality: fully functional, controller model: PLC Siemens S7, production capacity: 4,000 unit/h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Capacity: 4,000 bottles/hour Dimensions of screw cap: 30 × 10 mm Dimensions of PET bottle (20 ml): 26.05 × 48.38 mm MACHINE DETAILS Control system: PLC Siemens S7 Sorting hopper Height of transport chains: approx. 1,000 mm ± 50 mm Power consumption: 2.5 kW Voltage supply: 380/400 V Fuse rating: 16 A EQUIPMENT Centrifugal cap sorter made of stainless steel AISI 304 with cap level sensor Cap feed chute made of stainless steel AISI 304 with electronic cap jam detector Manual device for removing misaligned caps Pick-and-place system Capping heads with magnetic clutch and cap cone Bottle neck ring centering with spikes Frequency-controlled geared motor Special design of the height adjustment range for handling bottles outside the height adjustment range Anti-rotation device Protective device to cover the bottles Electric height adjustment of the capping head Axially adjustable worm Control cabinet Machine drive via Danfoss VLT 2800 frequency inverter Touch panel for operation FESTO pneumatics Diameter of the feed table: 800 mm Feed table with frequency inverter and separate drive Conveyor extension at the machine inlet: 500 mm Bdodpfx Ajzyihhoa Ijh Conveyor extension at the machine outlet: 200 mm Sensor control Mechanical cap feeding system with floor-mounted storage container Vertical conveyor made of stainless steel AISI 304 with cap conveyor belt

Condition: used, functionality: fully functional, Dosing hopper with inclined base, equipped with an extraction screw conveyor. Capacity: 3 m3 Bodozxz Iqjpfx Aa Iodh Dimensions: 2800x1400x2300mm Driven by a high-efficiency ALMO IE3 geared motor (model MH3-100L4, 230/400V, 1445 rpm, manufactured 07/2017). Equipped with plexiglass inspection windows. Mounted on a mobile frame with wheels. In good overall condition. Made of painted steel.

Year of construction: 2000, condition: used, Suitable for 0.7l-VdF bottles, capacity: 3000bottles/h, running direction: right to left, the packing head is equipped with 12 long-life packing tulips, the machine was used in low-volume operation, is very well maintained and has low operating hours, an on-site inspection is possible. Bdodozxr Nlepfx Aa Ioh

Year of construction: 1982, condition: used, Throughput: 2000-4000bottles/h, number of rows: 12, the machine is steam-heated and fully functional, an on-site inspection is possible. Bsdozxr Nxepfx Aa Isdh

Condition: excellent (used), ALFA LAVAL CAF 2H/1 – Double-Head Aseptic Filler – Stainless Steel ALFA LAVAL CAF 2H/1, a 2-head aseptic filler, designed for the sterile filling of liquid, semi-liquid, and viscous food products into large-format aseptic packaging within industrial processing lines. The dual filling head configuration allows operation with two stations, facilitating process continuity and increasing operational flexibility. This type of equipment is especially suitable for packaging pre-sterilized products that must be maintained under aseptic conditions until sealing. Its stainless steel construction, protected filling zones, and automatic control system allow it to be integrated with sterilizers, aseptic tanks, and complete processing lines for fruits, tomatoes, and other food products. MAIN FEATURES -Manufacturer: ALFA LAVAL -Model: CAF 2H/1 -Type: Automatic aseptic filler -Number of heads: 2 -Dual filling station configuration -Product filling under aseptic conditions -Designed for pre-sterilized product -Automatic process control system -Sanitary product circuits -Construction primarily in stainless steel -Integrated process instrumentation and valves -Central control panel -Closed filling zones with safety guards -Roller conveyors for handling the packaging -Designed for industrial operation -Integrable into complete aseptic processing lines PROCESS The ALFA LAVAL CAF 2H/1 receives the product that has already undergone sterilization and guides it to the filling heads, maintaining the required hygienic conditions during filling. The packaging is positioned at the corresponding station and connected to the filling system, with the product transferred within a protected and controlled zone. Once filling is complete, the packaging can be removed and replaced with another to continue production. The 2-head configuration is particularly useful for maintaining an efficient workflow during packaging changeover operations. APPLICATIONS Especially suitable for processors of tomatoes, fruits, and vegetables, as well as manufacturers of purees, pulps, concentrates, juices, and sauces that need to package sterilized products for storage or distribution. Bodpfozxk Tpsx Aa Isdh Depending on the installed configuration, it can be used with aseptic bags in drums, bins, or other industrial containers. It can be integrated with aseptic sterilizers, buffer tanks, sanitary pumps, CIP systems, and UHT lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), Gravity-Fed Linear Filler – Stainless Steel Automatic, gravity-fed linear filler made of stainless steel, designed for the continuous filling of liquid products into bottles, jars, and other rigid containers within industrial packaging lines. The equipment incorporates multiple filling nozzles arranged in a line, allowing for the simultaneous processing of several containers. The product is dispensed by utilizing gravity, providing a simple and efficient solution for low-viscosity liquids and products with good flow characteristics. Its construction primarily in stainless steel, integrated conveyor, and protected filling area make it particularly suitable for professional applications in the food and beverage industry. MAIN FEATURES -Type: Automatic, gravity-fed linear filler -Filling system: Gravity feed -Linear, multi-nozzle configuration -Simultaneous filling of multiple containers -Automatic container feeding -Controlled positioning under the nozzles -Integrated infeed and outfeed conveyor -Continuous industrial operation -Construction primarily in stainless steel -Product distribution circuit -Enclosed filling area with guards -Hygienic design for the food industry -Compact and robust construction -Integrable into automatic packaging lines PROCESS The containers are automatically transported to the filling area, where they are positioned under the different nozzles. Once positioned, the filling process is carried out using gravity, taking advantage of the height difference and the natural flow of the product to introduce it into the containers. At the end of the cycle, the containers are released and automatically continue to the next stage of the line. This filling principle is particularly suitable for liquid and fluid products with low viscosity. It can be integrated with: Container feeders Feed tanks Transfer pumps Capping and sealing machines Twist-off closing machines Weight checkers Inspection systems Labeling and coding machines Case packers and end-of-line equipment APPLICATIONS Particularly suitable for food industries, beverage manufacturers, canning companies, liquid sauce producers, and packaging companies that need to automate the filling of fluid products. Depending on the installed configuration and the characteristics of the product, it can be used for water, juices, beverages, vinegars, brines, oils, liquid sauces, and other low-viscosity products. Its linear, multi-nozzle configuration, gravity-fed filling, and stainless steel construction provide a versatile solution for industrial packaging lines. Bjdszxch Sspfx Aa Iedh Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), GUALAPACK FLEXTECH CHP30-RS Automatic Bag Filling and Capping Machine – Stainless Steel GUALAPACK FLEXTECH CHP30-RS automatic filling and capping machine, designed for the automatic filling and sealing of flexible pouches with spouts and caps in industrial food packaging lines. The equipment integrates the operations of pouch feeding, positioning, filling, and capping in a single unit, providing an automatic and continuous process, and reducing manual handling of the packaging. Bjdpozxcblsfx Aa Iedh Its construction, mainly in stainless steel, together with the comprehensive safety enclosure and automatic handling systems, makes it particularly suitable for professional food product lines in pouch format. MAIN FEATURES -Manufacturer: GUALAPACK / FLEXTECH -Model: CHP30-RS -Type: Automatic bag filling and capping machine -Format: Flexible pouch with spout -Automatic product filling -Automatic cap placement and sealing -Automatic pouch handling and positioning -Continuous industrial operation -Integrated transport system -Construction mainly in stainless steel -Perimeter enclosure with safety guards -Integrated control panel -Pneumatic and electromechanical drive systems -Designed for automatic packaging lines -Integrable with upstream and downstream equipment in the line PROCESS The GUALAPACK FLEXTECH CHP30-RS is designed to automate the packaging of products in flexible pouches equipped with spouts. The pouches are automatically fed and positioned in the work stations. Then, the product is dispensed through the spout, followed by the placement and sealing of the cap. Once filled and sealed, the pouches are discharged to continue to the next operations of inspection, control, or packaging. It can be integrated with: -Product feeding systems -Sanitary tanks and pumps -Dosing systems -Pouch feeders -Cap feeders -Weight checkers -Metal detectors -Inspection systems -Conveyors -Case packers and end-of-line equipment APPLICATIONS Particularly suitable for manufacturers of baby food, purees, fruit preparations, sauces, dairy products, beverages and other liquid or semi-liquid products packaged in pouches with spouts. The combination of GUALAPACK FLEXTECH technology, automatic filling, and integrated capping provides a complete industrial solution for spouted pouch packaging lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), SIDEL / HEMA SF Classic MV2 Volumetric Filler SIDEL / HEMA SF Classic MV2 automatic volumetric filler, designed for the precise dosing and filling of food products into containers within continuous industrial production lines. The equipment uses a volumetric filling system, allowing control over the amount of product introduced into each container and maintaining uniform dosing throughout the production process. The SF Classic MV2 incorporates a product feeding hopper, automatic container transport, and a control system with a Siemens HMI, offering an automated solution for professional filling applications in the food industry. MAIN FEATURES -Manufacturer: SIDEL / HEMA -Model: SF Classic MV2 -Type: Automatic volumetric filler -Volumetric dosing system -Automatic product feed -Integrated product hopper -Automatic container handling -Integrated infeed and outfeed conveyor -Automatic container positioning -Control panel with Siemens HMI -Construction primarily in stainless steel -Perimeter safety guards -Designed for continuous industrial operation -Integrable into automatic filling and packaging lines APPLICATION The SIDEL / HEMA SF Classic MV2 is designed to automatically dispense a controlled volume of product into each container. The product is fed from the top hopper to the volumetric system. The containers arrive automatically via the conveyor, are positioned in the filling area, and receive the set amount of product before continuing to the next stage of production. This system is particularly suitable for applications where dosing consistency, automated filling, and continuous operation are required. Bedpfx Aaozw Dgye Ijdh It can be integrated with: Product feeders Container conveyors Seamers and cappers Can closers Cap feeders Weight checkers Inspection equipment Labeling and coding machines Packaging equipment and end-of-line equipment Complete automatic filling lines APPLICATIONS Especially suitable for canning industries, food manufacturers, sauce producers, food preparation companies, and other processing plants that require an automatic volumetric filling system. Depending on the installed configuration, it can be used for different liquid, semi-liquid, viscous, or particulate food products, adapting to the specific product and container format. The combination of SIDEL / HEMA technology, volumetric dosing, and automatic container handling makes the SF Classic MV2 a particularly interesting solution for continuous industrial filling lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), ZACMI 40-Cup Rotary Telescopic Filler – Stainless Steel Bdjdpfxozw Dbwe Aa Ieh ZACMI automatic telescopic filler with 40 cups, designed for the volumetric filling of solid and particulate food products into containers within continuous industrial production lines. Manufactured by ZACMI, the machine features a rotary telescopic filling system with 40 dosing cups, enabling the automatic and continuous feeding, dosing, and filling of the containers. This type of technology is particularly interesting for the canning industry, where a regular volumetric dosage of solid or particulate products is required, along with their proper introduction into cans or other rigid containers. Its construction, primarily in stainless steel, along with the rotary carousel and automatic transport systems, provides a robust solution for high-production industrial lines. MAIN FEATURES -Manufacturer: ZACMI -Type: Automatic telescopic filler -Number of dosing cups: 40 -Telescopic volumetric filling system -Rotary configuration -Multiple filling stations -Automatic product dosing -Automatic container handling -Continuous container input and output -Integrated conveyor -Construction primarily in stainless steel -Perimeter safety guards -Designed for continuous industrial production -Integrable into automatic canning lines APPLICATION The ZACMI filler is designed to perform continuous volumetric filling using a rotary system with 40 cups. The containers are automatically fed and transferred to the filling carousel. During the cycle, the dosing cups control the amount of product and transfer it into the container. Once filled, the containers automatically continue to the next stage of production. It can be integrated with: -Product feeding systems -Can feeders and conveyors -Liquid or brine dosing systems -Can sealers -Lid feeders -Weight checkers -Container washers -Pasteurizers and autoclaves -Labeling and end-of-line equipment APPLICATIONS Especially suitable for canning industries and processors of vegetables, legumes, and other solid or particulate foods that require a high-capacity automatic filling system. Depending on its configuration and installed format, it can be used with vegetables, legumes, olives, and other solid or particulate products intended for canning. The combination of 40 cups, rotary operation, and telescopic filling technology makes this ZACMI a particularly interesting solution for continuous production canning lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), MECOM Automatic Telescopic Filler – Rotary Filler for Cans MECOM automatic telescopic filler, designed for the volumetric filling of solid and particulate food products into cans and rigid containers within continuous production lines. The machine incorporates a rotary telescopic filling system, designed to dispense and introduce the product into the containers in a controlled and continuous manner. This filling system is particularly suitable for products that require controlled volumetric dosing and proper introduction of the solid or particulate product into the container. Its robust construction in stainless steel and its rotary configuration make it especially suitable for canning production lines. MAIN FEATURES -Manufacturer: MECOM -Type: Automatic telescopic filler -System: Telescopic volumetric filling -Rotary configuration -Designed for cans and rigid containers -Suitable for solid and particulate products -Multiple filling stations -Automatic container handling -Integrated container conveyor -Automatic container infeed and outfeed -Stainless steel construction -Continuous industrial operation -Integrable into existing canning lines APPLICATION The containers automatically enter the machine via the conveyor and are transferred to the rotary filling section. The telescopic system facilitates the controlled introduction of the product into each container during the continuous operation of the machine. Once the filling is complete, the containers are automatically discharged and transferred to the next stage of the process. It can be integrated with: Product feeding systems Can feeders and conveyors Liquid or brine dosing systems Can sealers Lid feeders Weight control systems Can washers Pasteurizers and autoclaves Bdedjzw Av Hepfx Aa Ioh Labeling and coding equipment Complete automatic canning lines APPLICATIONS Particularly suitable for canning industries, vegetable processors, legume processors, and other food industries that require the automatic filling of solid or particulate products. Depending on its configuration, this type of filler can be used with vegetables, legumes, olives, and other solid or particulate products intended for subsequent closing and processing. The combination of rotary operation, telescopic filling technology, and automatic container handling provides an efficient solution for continuous production canning lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), ZILLI & BELLINI 40-Piston Rotary Filling Machine – Stainless Steel Automatic rotary filling machine by ZILLI & BELLINI, equipped with 40 pistons, designed for volumetric filling of containers in high-production industrial lines for the food and canning industries. The machine incorporates a rotary filling system with 40 pistons, allowing for the continuous processing of multiple containers as they move along the carousel. This configuration provides an efficient solution for lines that require automatic, uniform, and high-capacity dispensing. Primarily manufactured from stainless steel, it features a robust industrial construction designed for continuous operation. KEY FEATURES -Manufacturer: ZILLI & BELLINI -Type: Automatic rotary piston filling machine -Number of pistons: 40 -Volumetric filling system -Rotary filling carousel -Automatic and continuous operation -Automatic container handling -Automatic container infeed and outfeed -Transfer stars -Stainless steel construction -Robust industrial design -Suitable for high-production lines -Integrable into automatic filling and packaging lines -Designed for the food and canning industries APPLICATION The ZILLI & BELLINI is designed for continuous volumetric filling of containers using a rotary carousel equipped with 40 pistons. The containers are automatically transferred to the carousel, where they are positioned for dispensing. During the rotation, the piston system introduces the corresponding amount of product before transferring the filled containers to the next stage of production. The combination of 40 pistons and rotary operation is particularly interesting for facilities that require a continuous flow of containers and a high level of automation. It can be integrated with: Container feeders and conveyors Product feeding systems Can closing machines Cap feeders Weight checkers Inspection equipment Pasteurizers and autoclaves Labeling and coding systems Stacking and end-of-line equipment APPLICATIONS Especially suitable for canneries, vegetable canning manufacturers, sauce producers, ready-made meal producers, and other food industries that require a high-capacity automatic filling system. Depending on its configuration, it can be used with liquid, semi-liquid, and viscous products, such as sauces, purees, creams, pastes, tomato products, and food preparations. Machine available for inspection. Bdodpfezw At Eox Aa Ioh Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), HEMA TD3/1 – Automatic Volumetric Piston Filling Machine The HEMA TD3/1 is an automatic piston filling machine designed for the precise volumetric dosing and filling of food products into containers within continuous production lines. The machine uses volumetric piston filling technology, which is particularly suitable for achieving controlled and uniform dosing of liquid, semi-liquid, and high-viscosity products, depending on the installed configuration. Equipped with a large stainless steel product hopper, an automatic container handling system, and an integrated conveyor, the HEMA TD3/1 offers a robust solution for industrial automatic filling applications. MAIN FEATURES -Manufacturer: HEMA -Model: TD3/1 -Type: Automatic piston filling machine -System: Volumetric piston filling -Automatic product dosing -Stainless steel feed hopper -Automatic container feeding and positioning -Integrated conveyor -Product contact areas in stainless steel -Control panel for the operator -Robust industrial construction -Designed for continuous production -Integrable into filling, closing, and packaging lines APPLICATION The HEMA TD3/1 is designed to automatically dispense a controlled volume of product into the containers as they pass through the filling line. The product is fed from the top hopper to the volumetric dosing system. The containers are automatically transported and positioned at the filling station, where the required amount is dispensed before continuing to the next stage of the process. The piston dosing system is particularly suitable for applications that require precision and consistency in filling volume. It can be integrated with: Container feeders Can and jar conveyors Capping and sealing machines Can sealers Lid feeders Weight checkers Inspection equipment Labeling and coding machines Packaging and end-of-line equipment APPLICATIONS Particularly suitable for canneries, food manufacturers, sauce producers, and prepared food companies that require an automatic volumetric filling system. Depending on its configuration, it can be used with sauces, creams, purees, pastes, tomato products, fillings, condiments, and other liquid, semi-liquid, or viscous products. Bdodpfx Aaszw Atrs Ieh Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), TECHMI 10-Piston Automatic Filler – Stainless Steel TECHMI automatic filler with 10 pistons, designed for precise and continuous dosing and filling of liquid, semi-liquid, and viscous products in industrial production lines. The machine is equipped with 10 pistons/filling nozzles, allowing multiple containers to be filled simultaneously in each production cycle, offering an efficient solution for medium to high production industrial processes. Primarily manufactured in stainless steel, it incorporates an in-line container conveyor, a protected filling area, and a control panel for the operator. MAIN FEATURES -Manufacturer: TECHMI -Type: Automatic piston filler -Number of filling pistons: 10 -Multi-nozzle configuration -Automatic volumetric filling system -Simultaneous dosing of multiple containers -Integrated container conveyor -Automatic positioning under the nozzles -Stainless steel construction Bdsdpfx Ajzwwa Tja Ijh -Closed filling area with safety guards -Integrated control panel / HMI -Adjustable filling system -Designed for continuous industrial production -Integrable into automatic filling and packaging lines APPLICATION The TECHMI filler is designed for automatic volumetric dosing using a 10-piston system. The containers are automatically transported to the filling area and positioned under the nozzles. The piston system dispenses a controlled amount of product into several containers simultaneously before transferring them to the next stage of the line. The piston filling technology is particularly suitable for products that require controlled volumetric dosing, including products with higher viscosity or consistency than those typically processed by gravity filling systems. It can be integrated with: Container feeding systems Bottle and jar conveyors Capping and sealing machines Cap feeders Weight checkers Metal detectors and inspection equipment Labeling and coding equipment Stacking and end-of-line systems APPLICATIONS A solution especially suitable for food manufacturers, sauce and condiment producers, canning companies, and packaging companies that require an automatic multi-head volumetric filling system. Depending on its configuration, it can work with sauces, creams, purees, pastes, jams, tomato-based products, condiments, and other liquid or viscous products. The 10-piston configuration allows for the simultaneous filling of multiple containers, making it particularly interesting for industrial lines that require automated and repetitive dosing. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2008, condition: used, functionality: fully functional, Blažek ABM-5 D stick packaging line for sale – 3 machines available For sale are three fully functional Blažek ABM-5 D stick packaging lines, including downstream collection stations. These systems were specifically developed for the precise filling of fine-grained sugar and feature volumetric dosing for granules and crystalline raw materials. Thanks to their robust design and reliable technology, the machines are also suitable for numerous other free-flowing products with comparable properties. Technical specifications: Manufacturer: Blažek Type: ABM-5 D Dosing system: Volumetric dosing Suitable for: Fine-grained sugar Granules Crystalline raw materials Current configuration: 5 sticks per cycle Includes downstream collection station Machines are fully functional Available systems: Year of manufacture 2008 Year of manufacture 2008 Year of manufacture 2016 Condition Bjdpfx Ajzvww Nsa Iedh All systems are in functional condition. A demonstration in test operation on-site is possible by arrangement, so that interested parties can be convinced of the function and performance of the machine. Inspection An inspection of the systems is possible by appointment. We will gladly provide further technical information, pictures, or a test run video. If you are interested, we look forward to hearing from you.

Condition: excellent (used), Audion Sealmaster Magneta 421 MG-2 Heat Sealer – 420 mm – 600 W Audion Elektro Sealmaster MAGNETA 421 MG-2 Impulse Heat Sealer. This device is suitable for sealing plastic bags and films and is designed for professional or commercial use. Data according to the nameplate: Model: Audion Sealmaster Magneta 421 MG-2 Year of manufacture: 2012 Sealing length: approx. 420 mm Seal width: approx. 3 mm Voltage: 230 V Frequency: 50/60 Hz Power: 600 W Serial number: 45/21968 with film cutter adjustable sealing time electromagnetic closing/holding function The device is in used condition with corresponding signs of wear, see photos. The device has been tested and is functioning perfectly. Sealing, magnetic function, and cutter are working. Bdsdpfx Aaozuvl As Ieh Wear parts or replacement parts are still available from the manufacturer if necessary – making it also interesting for continued professional use.

Condition: used, Little used Kosme filling line with equipment made between 2020 and 2021. Bodpfx Aaezunu Ns Ijdh Equipment includes: - Kosme rotary weight-filler, designed for precise filling of liquids such as edible oils, dairy, home care, or personal care products. - Kosme Flexa Sensicol rotary labelling machine. - Kosme and Atlanta S.p.A. packaging equipment.

Condition: used, KRONES ROUND GLASS LINE 500/600BPM 700ml, 750ml, 1 Litre STORK MINIATURE LINE Bjdpfxezrf A Eo Aa Ijdh 200 BPM 50ml Glass & PET BERTOLASO LINE 200BPM 200ml, 300ml, 375ml, 500ml Glass & PET STORK GLASS LINE 200BPM 350ml, 700ml, 750ml, 1.14 Litre

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. Bjdpfx Aaezmyvio Iodh • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Year of construction: 2006, condition: used, Complete Automatic PET Edible Oil Bottling and Packaging Line – 8,000 Bottles/Hour Complete fully automatic production and packaging line for filling edible oil into 1.0 L PET bottles, with a production capacity of approximately 8,000 bottles per hour. Our asking price is EUR 520,000 net, ex works Shtip, North Macedonia. The price is negotiable, and we are open to considering reasonable offers. The line covers the complete production and packaging process, from PET preforms to finished automatically palletized products. The complete line includes: SIAPI EAS 50.100/8 – PET stretch blow moulding machine, 8 cavities Bjdpfjzmd Uiex Aa Isdh Bottle air conveyor and conveying system AVE Industries RVM 30/8 – filling and capping monoblock, 30 filling stations and 8 capping stations Nitrogen injection system Bottle conveyor system AVE Industries 8T H/M E1 – automatic labelling machine AVE Industries CP3-20 – automatic shrink wrapping / packaging machine with heat tunnel Conveyor systems AVE Industries PABR-80 – automatic palletizing system Main specifications: Application: Edible oil Bottle material: PET Bottle size: 1.0 L Line production capacity: approx. 8,000 bottles/hour Main equipment year of manufacture: 2006 Fully automatic production and packaging line The equipment is offered as a complete integrated production line for PET bottle blowing, edible oil filling, capping, labelling, shrink wrapping and automatic palletizing. The complete line is currently installed, in operation and fully functional. Interested buyers can inspect the line and see it running under actual production conditions by prior arrangement. The line is located in Shtip, North Macedonia. Additional technical documentation, photographs and videos of the equipment are available upon request. The complete line is offered for sale as one unit.

Year of construction: 2009, condition: ready for operation (used), Equipment: height-adjustable conveyor, lid sorting and feeding system, conveyor belt with infeed and outfeed section, stainless steel construction, safety enclosure with interlocked safety doors, integrated electrical control cabinet and operator panel, the machine is designed to process Pano TO 100mm PP HOmao closures without liners. Inspection on site is possible. Bdjdpfx Aozhw Tnja Ijh

Year of construction: 2000, condition: ready for operation (used), A combined rotary bottle filling and capping machine MAG Schymanski (filling monoblock) with capping heads renewed in 2023 is available. Capper manufacturer: Arol, capper type: Euro VA, filling system: rotary filler, filling valves: 28, capping heads: 4, filling capacity range: 3500bottles/h-6000bottles/h. Documentation available. An on-site inspection is possible. Bodpfxjzg Iquj Aa Ijdh

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: QP-25-AF, type of input current: three-phase, input voltage: 400 V, Qualipack QP-25-AF Bdsdpfxszgtv Aj Aa Ieh The fully automatic filling cycle begins by completely closing the bag valve and also registering the bag's weight. The next phase fills the bag, which is located on a load cell, with a rapid feed via a pneumatically operated slide gate and a screw conveyor. When the weight reaches a pre-set amount (typically around 95% of the required total), the slide gate closes to a slower feed rate until the required weight is reached, after which it closes completely. Once the screw conveyor has transferred all the product, it stops, and the valve seal is automatically released, ready for the bag to be removed. - Conveyor belts for filled bags - Sealers for filled bags - Weighing capacity: 5-50 kg - Accuracy: Within 25g - Filling rate: Up to 4 tons per hour - Filling method: 2-stage via a screw conveyor - Valve grip: Pneumatic (fully closed) - Bag support: Height-adjustable gravity rollers - Product feed: Controlled by a pneumatic gate