verpackung24 GmbH

Condition: used, mileage: 201,928 km, power: 353 kW (479.95 HP), first registration: 01/2023, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 3,900 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 7,670 mm, total width: 2,550 mm,

Condition: used, CTS T-50/3800/I – Temperature/Battery Test Chamber Temperature range: -50 to +100 °C | 3,750 liters | water-cooled Nitrogen inertization with O2/CO monitoring and safety door locking Used temperature test chamber from CTS – Clima Temperatur Systeme GmbH. According to the previous owner, it was used for HV battery testing; suitable for temperature and material testing, environmental simulation, and quality assurance. TECHNICAL DATA Chsdpfx Ao Ah Si Hop Ded Type: T-50/3800/I Temperature range: -50 to +100 °C Temperature deviation over time/space: up to ±0.5 K each Heating: approx. 4 K/min (-40 to +80 °C) Cooling: approx. 3 K/min (+85 to -40 °C) Change rates according to the manufacturer, without test specimen, measured in the supply air. REFRIGERANT Pre-cooling: R507, 6.5 kg Cooling: R23, nameplate rating 15 bar / 5 kg Both circuits: max. permissible overpressure 25 bar, test pressure 27.5 bar ELECTRICAL 400 V / 3/N / 50 Hz; rated power 20.4 kW; rated current 36.3 A On-site protection: 50 A slow-blow; protection class IP54 DIMENSIONS AND WEIGHT Test volume: 3,750 liters Internal dimensions (H × W × D): approx. 1,000 × 2,500 × 1,540 mm according to the previous owner Installation drawing: dimensions in plan view 2,840 mm; system height approx. 2,450 mm. Complete external dimensions to be confirmed. Test chamber approx. 2,700 kg; control cabinet approx. 200 kg; total approx. 2,900 kg without test specimen/additional equipment. EQUIPMENT Digital temperature control with 32-bit controller, LCD setpoint/actual value display, manual and program operation, stainless steel test chamber (1.4301), stainless steel heating element, radial fan, lockable double-leaf door, water-cooled refrigeration unit, separate control cabinet. Test chamber floor load: 500 kg. SAFETY AND CONNECTIONS Nitrogen inertization, O2 residual content and CO monitoring, Dräger-Polytron sensors according to the previous owner, ATEX-tested flame arrestors according to manufacturer’s documents, electromagnetic door locking, mechanical emergency opening, safety temperature limiter, overpressure switch in the refrigeration circuit, fan motor current monitoring. RS232; potential-free fault report contact. HV connections and cooling water connections for test specimens according to the previous owner. Max. heat radiation: 5,000 W at -40 °C. Cooling water: R 1 inch, approx. 2.5 m³/h at ΔT 10 K and full load. Nitrogen: R 3/4 inch, operating pressure 3–6 bar. Condensate drain: R 1 inch internal thread. Sound pressure level: below 70 dB(A) according to the manufacturer. NOTE ON BATTERY TESTING HV battery application and designation of the safety equipment as “Hazard Level 6” according to the previous owner; classification not independently confirmed. CONDITION AND SCOPE OF DELIVERY Used; optical condition according to the pictures. 1 × CTS T-50/3800/I, separate control cabinet and accessories according to the pictures. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, mileage: 71,814 km, power: 96 kW (130.52 HP), first registration: 12/2023, fuel type: gasoline, axle configuration: 4x2, wheelbase: 2,720 mm, fuel: super 95, CO₂ emissions: 153 g/km, fuel tank capacity: 54 l, color: white, gearing type: automatic, number of gears: 7, emission class: euro6, number of seats: 2, total length: 4,490 mm, total width: 1,860 mm, total height: 1,840 mm, Equipment: ABS, Android Auto, Apple CarPlay, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), hill-start assist, navigation system, onboard computer, power mirror, sliding door, traction control, = Additional Options and Accessories = - Rear parking sensors - Front parking sensors - Sliding door on the right side - Automatic low beam headlights - Heated exterior mirrors - Passenger airbag - Electric front windows - Electrically folding exterior mirrors - Electrically adjustable exterior mirrors - Euro 6 emission standard - Driver airbag - Remote central locking - Height-adjustable driver's seat - Keyless entry - Keyless start - LED daytime running lights - Lumbar support - Front center armrest - Multimedia capable - Radio - Radio with DAB - Rain sensor - Rearview camera - Immobilizer - Bumpers in body color - Blind spot monitoring - Traffic sign recognition - Connected services - Partition = Additional Information = General Information Number of doors: 5 Model range: Nov. 2021 - Dec. 2024 Cab: simple Technical Information Torque: 240 Nm Number of cylinders: 4 Engine displacement: 1,333 cc Acceleration (0-100): 10.8 s Top speed: 183 km/h Dimensions Length/Height: L1H1 Weights Unladen weight: 1,334 kg Payload: 676 kg GVWR: 2,010 kg Cjdj Ah Si Aopfx Ap Djhd Interior Interior: black Consumption Average fuel consumption: 6.7 l/100km Maintenance, History and Condition APK (Technical Inspection): valid until 12/2027 Number of keys: 2 (2 remote controls) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: Bull30_4, working width: 3,100 mm, stroke length: 270 mm, distance between stands: 3,200 mm, reverse speed: 40 mm/s, travel distance X-axis: 600 mm, back gauge: 600 mm, back gauge speed R-axis: 100 mm/s, back gauge travel distance R-axis: 250 mm, back gauge travel distance Z-axis: 3,200 mm, overall weight: 16,000 kg, total length: 20,000 mm, total width: 40,100 mm, total height: 32,000 mm, warranty duration: 36 months, travel distance Y-axis: 270 mm, travel distance Z-axis: 3,200 mm, pressing force: 250 t, height adjustment type: electric, mount diameter: 3,100 mm, rapid traverse X-axis: 500 m/min, rapid traverse Y-axis: 40 m/min, space requirement height: 3,500 mm, space requirement length: 2,000 mm, space requirement width: 4,010 mm, table width: 3,200 mm, travel distance R-axis: 250 mm, working length: 3,100 mm, Equipment: CE marking, angle measuring system, angle stop, documentation/manual, emergency stop, european tool clamping system, finger protection, lower tooling, safety light barrier, upper tooling, Electric press brake Bull30 CoastOne Oy - Made in Finland Spindle drive - 5 controlled spindles Chjdps Ah Siusfx Ap Djd Directly controlled crowning in the upper beam Pressing force: 2500kN Bending length: 3100mm Light barrier: Lazersafe IRIS Tool clamping: WILA hydraulic Backgauge: X-R-Z1-Z2 controlled Control: TC15-2D graphics control Front support arms, height adjustable and foldable Work light at the front and in the stop area Price and delivery time on request Further equipment options on request Warranty: 36 months after installation

Condition: reconditioned (used), functionality: fully functional, pressure: 200 bar, empty load weight: 168 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KÄRCHER HDS 10/20-4M HOT WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 200 bar and a flow rate of 1000 l/h, this machine is well-suited for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL DATA: Model: HDS 10/20-4M Supply voltage: 400V ~ 3-phase Flow rate (l/h): 500 – 1000 Operating pressure (bar): 30 – 200 Max. Water heating temperature (°C): 80–155 Connected load (kW): 7.8 Fuel tank capacity (l): 25 Cleaning agent tank capacity (l): 20 + 10 High-pressure hose length (m): 10 Weight (kg): 168 Dimensions (L x W x H, mm): 1330 x 750 x 1060 EQUIPMENT: Cedpo Ah Siqjfx Ap Dshd NEW heavy-duty high-pressure spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced, steel-braided high-pressure hose (10 m) NEW 25° power nozzle Water filter and GEKA-style quick-connect couplings – INCLUDED (FREE) KEY FEATURES: Open oil system – no operating time restrictions Two built-in chemical tanks allow for the direct dispensing of cleaning agents through the machine Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and straightforward to service Tank for water-softening agent (RM110) prevents corrosion and limescale buildup within the heating coil and other internal plumbing. An exhaust gas temperature sensor shuts off the engine if the temperature exceeds 300°C. When the eco!efficiency mode is activated, the unit heats the water to 60°C, which allows for effective cleaning—even of heavy soiling—while simultaneously reducing fuel consumption by approximately 20%.

Condition: like new (used), Year of construction: 2010, overall weight: 890 kg, For sale: industrial generators by Marelli, in like-new condition. Chsdpfe Ah Siiox Ap Dod Please contact me for more information.

Condition: used, mileage: 537,116 km, power: 294 kW (399.73 HP), first registration: 12/2014, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: red, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,400 mm, total width: 2,550 mm, Equipment: AdBlue, air conditioning, crane, cruise control, differential lock, electric window regulation, traction control, = Additional options and accessories = - Lifting axle - Air suspension - Power take-off (PTO) - Radio - Rear view camera - Disc brakes - Sun visor - Tool box = Notes = Man TGS 8x4-4 BL Lift steering axle. 9,000 kg front axle. Engine PTO. Crane: HMF 1943 Z2 Container system: Hyvalift: 26-55 S 26,000 kg. 560 cm. Cedps Ah Sifofx Ap Dshd = Further information = Technical information Number of cylinders: 6 Axle configuration Brakes: Disc brakes Front axle: Steered; Suspension: Leaf spring suspension Rear axle 1: Suspension: Air suspension Rear axle 2: Suspension: Air suspension Rear axle 3: Steered; Suspension: Air suspension Weights Unladen weight: 16,585 kg Payload: 19,415 kg GVW: 36,000 kg Functional Crane: HMF Identification Model number: TGS 36.400 8x4 EURO 6 / Z CRANE = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, Color: Red Model number: Container Chsdpo Ah Sibofx Ap Dsd = Company Information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT) We speak Russian. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 220 mm, travel distance Z-axis: 650 mm, number of axes: 3, This DMG NEF 400 was manufactured in 2006. It features a maximum spindle speed of 4000 RPM and includes a 12-station tool turret for efficient tool management. The machine is equipped with a manual tailstock and a 3-jaw chuck for versatile clamping. If you are looking to get high-quality turning capabilities, consider the DMG NEF 400 horizontal turning machine we have for sale. Contact us for further details. - Number of Controlled Axes: 3 axes (X, Z, C) - Swing Diameter: - Over Bed: approx. 400 mm - Over Cross Slide: approx. 230 mm - Turning Diameter (max.): approx. 200 - 250 mm - Rotary Axis: C-Axis (main spindle indexing / positioning) - Control Unit: Heidenhain EP 4290 TP (Heidenhain Plus panel) - Spindle Speed (max.): 4000 RPM - Apparent Power: 21 kVA - Nominal Current (Jn max): 31 A - Fuse / Total Current: 35 A / FN1 - Operating Voltage: 400 V (50 Hz) - Control Voltage: 230 V / 24 V- Tool Carrier: 12-station tool turret (VDI 30 / VDI 40) - Clamping Device: 3-jaw manual/hydraulic chuck installed Technical Specification Counter Spindle No Driven Tools Yes Cedpfx Ao Ah Sh Tsp Dehd

Condition: excellent (used), Year of construction: 2008, Title: MEP TIGER 352 SX evo Metal Cut-off Saw / Cold Cut Saw – Semi-automatic – Year of Manufacture 2008 Technical Data (Manufacturer's Specifications for the Model): * Manufacturer: MEP, Italy * Model: TIGER 352 SX evo * Year of Manufacture: 2008 * Saw Blade: HSS 350 × 32 × 2.5 mm * Motor Power: 1.8 / 2.6 kW * Connection: 400 V Three-Phase * Saw Blade Speeds: 15 / 30 / 45 / 90 rpm * Miter Range: -45° to +60° * Maximum Vise Opening: 190 mm * Cutting Range at 90°: Round material up to Ø 115 mm * Square Material at 90°: up to 95 × 95 mm * Rectangular Material at 90°: up to 180 × 95 mm * Machine Weight: approx. 425 kg * Dimensions: approx. 1,050 × 1,120 × 2,050 mm Equipment: * Semi-automatic sawing technology * Control panel with control unit * Pneumatic workpiece clamping Chedpfx Ao Ah Sh Nep Djd * Swiveling saw table for miter cuts * Coolant system * Robust machine base * Saw blade and other accessories shown in the pictures, available after inspection

Condition: used, Vötsch Temperature shock chamber / Thermal shock chamber Vötsch ShockEvent T/120/V2 temperature shock chamber Hot chamber up to +220 °C / Cold chamber up to -80 °C Workshop-checked – water-cooled version with 120-liter test chamber volume For sale is a used temperature shock chamber from the manufacturer Vötsch Industrietechnik GmbH. The temperature shock chamber is suitable for thermal cyclical testing, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging and stress tests. The system has a hot chamber and a cold chamber. The test item is transported between the two temperature zones using a mobile test trolley. This allows for rapid temperature changes to test the thermal resistance. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: ShockEvent T/120/V2 Device type: Temperature shock chamber / Thermal shock chamber Year of manufacture: 2018 Hot chamber: up to +220 °C Cold chamber: up to -80 °C Two-chamber temperature shock system Humidity control: not available Water-cooled version Temperature data according to manufacturer's brochure: Hot chamber: +50 °C to +220 °C Cold chamber: -80 °C to +100 °C Temperature change by transporting the test item between the hot and cold chambers Temperature change rates according to manufacturer's brochure: Heating rate, hot chamber: approx. 18 K/min Cooling rate, cold chamber: approx. 7.5 K/min Refrigerant 1: R449A Refrigerant quantity: 1.70 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 1.30 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Standby pressure: 14 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A Test chamber volume: 120 liters Internal dimensions (H × W × D): 410 × 470 × 650 mm External dimensions (H × W × D): 2,450 × 1,000 × 2,530 mm Weight: approx. 1,000 kg Dimensions and weight according to manufacturer's brochure for the basic unit of the T/120/V2 model series. Deviations due to equipment features are possible. Equipment: Two separate temperature chambers Hot chamber and cold chamber Mobile test item trolley Digital control and operating unit Temperature control Water-cooled version Cooling water connections for supply and return Temperature shock operation Temperature change between hot and cold chambers Electrical connection: 400 V / 50 Hz Refrigeration system with R449A and R23 Temperature monitoring Test item support in the mobile trolley Application areas: Temperature shock testing Thermal cyclical testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Research and development Service life testing Aging and stress tests Chjdpfxo Ah Shwj Ap Dsd Condition: Used Optical condition according to pictures Scope of delivery: 1x Vötsch ShockEvent T/120/V2 temperature shock chamber Accessories according to pictures The table shown in the photos, or any other items not explicitly mentioned, are not part of the sale. Shipping or freight transport possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Year of construction: 2022, condition: ready for operation (used), Plastic processing machine manufactured in 2022. This RAPID 400-60 includes a Pulsotronic metal detection unit, a machine base frame, and a material extraction system with a cyclone separator, ductwork, and filter bag. If you are looking to get high-quality plastic processing capabilities, consider the RAPID 400-60 machine we have for sale. Contact us for further details. Cjdpfx Aj Ah Shtjp Dshd

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 91121053, Year of construction: 2017, operating hours: 185 h, load capacity: 2,500 kg, lifting height: 5,000 mm, free lift: 1,500 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, battery capacity: 775 Ah, battery voltage: 48 V, fork length: 1,150 mm, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), empty load weight: 4,412 kg, Equipment: 3rd hydraulic function, hydraulic fork positioner, Jungheinrich ETVQ 25 4-way reach truck, year of manufacture 2017 with a Triplex mast Details: Jungheinrich ETVQ 25 Year of manufacture: 2017 Work hours (h): 185 Mast type: Triplex Lift height (mm): 500 Freelift (mm): 1500 Build height (mm): 2350 Attachments: Fork positioner Lift capacity (kg): 2500 Fork length (mm): 1190 Weight (kg): 4412 Additional hydraulic vehicle: AH1 Additional hydraulic mast: AH1 Front wheels: Polyurethane Rear wheels: Polyurethane Battery YOM: Unbekannt Battery capacity (Ah): 775 Battery voltage (V): 48 Chjdpfx Ae Ah Sg Iep Dsd Comments: Full freelift. Forkpositioner opens from 485 mm to 1640 mm.

Condition: used, Year of construction: 2018, The line consists of: Treif slicer Type: Divider 660+ Serial number: 660002.21888.133706 Year of manufacture: 2018 Cutting speed: max 2640 RPM Slice thickness: 0.5 - 25 mm Stack height: up to 100 mm Product dimensions: max 280 x 160 mm Product length: max 850 mm Belt width: 385 mm Compressed air: min 6 Bar Power: 3 x 400V, 50Hz, 7.5kW Dimensions: 1900 x 1050 x 2150 mm Weight: 850 kg Includes knife holder and parts trolley Treif / Wipotec checkweigher Belt width: 345 mm Weighing platform: 400 mm Dimensions: 400 x 1100 x 1050 mm Treif transverse sorter Belt width: 420 mm Cheds Ah Sg Dopfx Ap Djd Dimensions: 700 x 1050 x 1050 mm Treif sorting conveyor Belt width: 420 mm Dimensions: 2300 x 1150 x 1250 mm Treif knife sharpener Type: HS-380 Serial number: 243003.61973.105787 Year of manufacture: 2009 Dimensions: 500 x 900 x 1650 mm Weight: 90 kg Variovac thermoformer Type: Optimus Serial number: 420.OL0707 Year of manufacture: 2018 Film: rigid film Film width: 420 mm Index: 280 mm Form: 2 pcs. or 232 x 175 mm Vacuum pump: Busch, RA0100F Compressed air: min 6 Bar Power: 3 x 400V, 50Hz, 15kW Dimensions: 4200 x 1100 x 1850 mm Weight: 1170 kg

Condition: excellent (used), functionality: fully functional, spindle bore: 52 mm, spindle speed (max.): 2,300 rpm, type of input current: three-phase, Displayed are the specifications for a parallel lathe: center height 230 mm, distance between centers 1000 mm, bar capacity 52 mm, spindle nose CL 6”, spindle speed 2300 rpm, 3 ranges. Codpfxe Ah Sgys Ap Dohd

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: CIP-8P_1003, overall weight: 320 kg, total length: 650 mm, total width: 2,300 mm, total height: 1,100 mm, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, Pneumatic Press-In Machine CIP-8P Technical Data: Pressing force 80 kN, approx. 8 tons Force setting via display, accuracy 1 kg Compressed air 8 bar, min. 150 l/min Tool and shank diameter: Total length 37 or 76 mm, of which 15 mm is in the holder, Ø 12.7 mm Compatibility: Tools from other manufacturers can also be used External dimensions (L × W × H) and weight: 650 × 2,300 × 1,100 mm, 400 kg Cedpfx Apo Ah Sgvj Dehd Warranty: 36 months after delivery

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 10 h, machine/vehicle number: ShearOne H3000-6_15, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, back gauge: 1,000 mm, overall weight: 7,000 kg, total length: 2,700 mm, total width: 4,500 mm, total height: 2,100 mm, warranty duration: 36 months, travel distance X-axis: 1,000 mm, cutting length (max.): 31,000 mm, cutting width (max.): 3,100 mm, Equipment: safety light barrier, Hydraulic guillotine shear ShearOne H3000-6 from CoastOne in Finland Chedpfxj Ah Sgne Ap Dod Cutting length - 3,100.0 mm Sheet thickness 400 N/mm² - 6.0 mm Sheet thickness 700 N/mm² - 4.0 mm Cutting angle ° - 0.5 - 2.0 Back stop - 1000 mm

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 34834_2025_34, total length: 1,050 mm, total width: 850 mm, total height: 1,240 mm, overall weight: 310 kg, number of drawers: 12, height adjustment type: mechanical, product height (max.): 3 mm, Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) Chodpfxj Ah Sgke Ap Djd -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Year of construction: 1996, condition: ready for operation (used), travel distance X-axis: 450 mm, number of axes: 3, This 3-axis OKAMOTO Grind-X ACC-450 DX was manufactured in 1996. It features a grinding range of approximately 450 x 150 mm and a maximum grinding height of 300 mm. The machine includes a hydraulic table drive and an electromagnetic clamping plate for enhanced precision. If you are looking to get high-quality surface grinding capabilities, consider the OKAMOTO Grind-X ACC-450 DX machine we have for sale. Contact us for further details. Csdj Ah Sggjpfx Ap Djhd - Table Dimensions: approx. 450 x 150 mm with T-slots - Max. Table Load Capacity: approx. 120 kg - Max. Grinding Height: approx. 300 mm (table surface to spindle center) - Machine Weight: approx. 1,500 kg - Drive Mechanism: Hydraulic table longitudinal drive - Operation / Controls: Compact control console with axis jog, cycle, and downfeed functions - Machining Capability: Surface / precision grinding (wet grinding capable) - Included Fixtures: Electromagnetic clamping plate on table, grinding wheel flange, wet grinding device with filter paper band unit - Excluded Items: Grinding wheel (delivered without wheel) - Conformity: CE marked

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 3483425_34, total length: 1,050 mm, total width: 850 mm, total height: 1,240 mm, overall weight: 310 kg, number of drawers: 12, height adjustment type: mechanical, product height (max.): 3 mm, Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: Csdpfs Ah Sf Uox Ap Dshd - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Condition: used, mileage: 1,214,666 km, power: 456 kW (619.99 HP), first registration: 08/2006, fuel type: diesel, tire size: 385/55 R22.5, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, Equipment: ABS, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, second fuel tank, soot filter, spoiler, = Additional options and accessories = - Roof spoiler - Aluminum fuel tank - Alloy wheels - Particle filter - Headlights - Side skirts Cjdps Ah Sf Rjfx Ap Dohd - Standard air conditioning - Sun visor - Alternating current - Tool box = Additional information = Year of manufacture: 2006 Cab: Topline Brakes: Disc brakes Front axle: Tire size: 385/55 R22.5; Steerable; Tire tread depth left: 1 mm; Tire tread depth right: 1 mm; Suspension: Leaf spring suspension Rear axle: Tire size: 315/70 R22.5; Dual tires; Alloy rims; Tire tread depth left inner: 14 mm; Tire tread depth left outer: 14 mm; Tire tread depth right inner: 14 mm; Tire tread depth right outer: 6 mm; Suspension: Air suspension Damage: None

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 34834_25_33, total length: 1,050 mm, total width: 850 mm, total height: 1,240 mm, overall weight: 310 kg, number of drawers: 12, height adjustment type: mechanical, product height (max.): 3 mm, Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece Csdpfs Ah Sf Hsx Ap Dehd

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, operating hours: 100 h, machine/vehicle number: C15_202500023, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, pressing force: 44 t, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment! Cjdj Ah Sf Aspfx Ap Djhd

Condition: used, mileage: 252,941 km, power: 353 kW (479.95 HP), first registration: 01/2023, fuel type: diesel, tire size: 385/65 R22.5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, second fuel tank, spoiler, = Additional Options and Accessories = - Roof spoiler - Spare key - Speed limiter - Aluminum fuel tank - Alloy wheels - Headlights Cedpfx Ao Ah Sfxep Dohd - Side skirts - Stability control - Visor - Alternating current - Tool kit = Additional Information = Year of manufacture: 2023 Brakes: Disc brakes Front axle: Tire size: 385/65 R22.5; Steered; Tire tread depth left: 11 mm; Tire tread depth right: 10 mm; Suspension: Leaf spring suspension Rear axle: Tire size: 315/80 R22.5; Dual tires; Tire tread depth left inside: 12 mm; Tire tread depth left outside: 12 mm; Tire tread depth right inside: 13 mm; Tire tread depth right outside: 13 mm; Suspension: Air suspension Damage: None

Condition: used, mileage: 164,637 km, power: 118 kW (160.44 HP), first registration: 03/2018, fuel type: diesel, tire size: 215/70 R15C, axle configuration: 4x2, wheelbase: 4,000 mm, fuel: diesel, color: other, gearing type: mechanical, emission class: euro6, suspension: steel, total length: 6,200 mm, total width: 2,100 mm, total height: 2,700 mm, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, = Additional Options and Accessories = - CD player - Speed limiter - Stability control - Alternating current = Additional Information = General Information Year of construction: 2018 Axle Configuration Tire size: 215/70 R15C Brakes: Disc brakes Cedpfx Apo Ah Sfuo Dohd Suspension: Leaf spring suspension Front axle: Steerable; Tire tread depth left: 6 mm; Tire tread depth right: 5 mm Rear axle: Tire tread depth left: 7 mm; Tire tread depth right: 6 mm Weights Unladen weight: 2,050 kg Payload: 1,450 kg GVWR: 3,500 kg Condition Damage: None