Ets chartier sarl

Condition: used, Year of construction: 1990, machine/vehicle number: 90-10-175, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, saw blade diameter: 450 mm, height adjustment type: mechanical, actuation type: manual, Equipment: saw blade guard, Altendorf table saw, model F-90, as shown in the photo. Year of manufacture: 1990. The saw is being sold because it has been replaced by a new one. It is still in perfect working order. It will be transported on a wooden pallet and can be loaded onto a truck using a forklift on site. Sold as is, no warranty. Dcjdezq Srqopfx Ai Aok

Condition: used, Year of construction: 2000, Used machine Year of manufacture 2000 special SCM guide system of the saw carriage. The arc-shaped arrangement between balls and running guides as well as the hardened contact surfaces ensure exceptional and constant precision the scorer can be swivelled in and out from outside without any problem; a special plate enables precise positioning the fence is extremely robust and can be used for both rip cuts and angle cuts; fast return to the initial position. The precise flip stops enable a direct reading of the dimensions over the entire length Table dimensions 830 x 1200 mm Saw carriage 1500 x 290 mm Cutting length 1500 mm Tilt of the saw blade 45° max. diameter main saw blade 300 mm max. diameter scoring saw blade 100 mm max. cutting height 90° = 95 mm max. cutting height 45° = 67 mm Saw blade speed 4000 rpm Scoring saw speed 8000 rpm Cutting width with parallel guide 1000 mm Diameter extraction port 100 mm Motor 4 kW Dcsdpfx Ajzlbr Aji Aek Weight: 425 kg Availability: at short notice Storage location: Röllbach

Condition: excellent (used), Weight: 760 kg Throat depth: 68 cm Djdpfx Aiezkkr Ao Aeck Table length: 115 cm Table width: 70 cm Cutting height: 10 cm Angle adjustment Motor: 4 kW

Condition: excellent (used), Table length: 300 cm Angle adjustment Cutting height: 11 cm Motor: 5.5 kW Dcjdpfezi N Duex Ai Ajk Integrated dust extraction system Clearance: 65 cm / 80 cm

Condition: used, functionality: fully functional, SCM SI16 SW panel saw Carriage length: 1500mm Cutting width from the right side: 1000mm Maximum cutting height: 100mm Scoring saw Dedjzg H N Nopfx Ai Aock Main saw diameter: 250-350mm Scoring saw diameter: 120mm Saw blade adjustable from 0-45° Saw blade adjustable up/down 3 saw blade speeds: 3200/4500/5500 rpm Scoring saw speed: 9800 rpm Main motor power: 5.5kW Scoring saw motor power: 0.75kW Dust extraction port diameter: 120mm

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, saw blade diameter: 300 mm, rotational speed (min.): 8,600 rpm, overall weight: 2,000 kg, trimming length: 1,150 mm, SECOND-HAND DOUBLE END TENONER FOR 45 DEGREES PARQUET - 90* max. length 290-1150mm - ⁠60* max. length 350-1050mm - ⁠45* max. length 410-1050mm - ⁠Max. Thickness 50mm Dodszfikmjpfx Ai Aeck - ⁠N. 4 saw motors - 2.2kw each - ⁠Saw blade diam. 300mm - ⁠Tilting angle 0-20* - ⁠N. 2 milling cutter motors - 3kw each - ⁠Speed rotation 8600rpm - ⁠Adjustable feeding speed 0-10m/min - ⁠N. 6 dust suction holes 100mm - ⁠Overall dimensions 3200x2050x1400mm - ⁠Weight 2000kg - ⁠Year 2023

Condition: used, Year of construction: 1988, saw blade diameter max. 450 mm Dcjdjzczf Sspfx Ai Ask

Condition: used, Year of construction: 2001, saw blade diameter min. 200 / max. 500 mm Dedpfxszczf Ee Ai Ajck Speed 2800 / 4000 / 5500 U/min.

Condition: used, functionality: fully functional, SCM si12 panel saw Specifications: • Condition – used, after a comprehensive inspection Dedoza Hi Rjpfx Ai Aeck • Manufacturer – SCM • Model – si 12 • Carriage length – 150 cm • Diameter of installed saw blade – 300 mm • Main saw motor – 3.0 kW • Saw blade can be tilted manually • Manual raising and lowering of the saw blade • Max cutting height – approx. 90 mm • Side table, dimensions: 85 x 60 cm • Dust extraction port – 100 mm diameter • Weight – approx. 450 kg • Overall dimensions: 350 x 150 x 100 cm (width x length x height) • Dimensions for transport: 90 x 150 x 100 cm (width x length x height) Additional information: • The machine is in good technical condition and ready for immediate use. • The photos show the actual condition of the item being sold. • It is possible to turn on and inspect the machine on-site. • Free training on how to operate the machine is provided (at the company's premises). • The price listed in the auction does not include VAT and transport costs. Financing and transport: • We arrange transport using our MDD fleet, courier companies, or external carriers. • We offer financial support in the form of leasing or a leasing loan.

Condition: excellent (used), Cutting length: 500 mm Cutting width: 120 cm Cutting height: 130 mm Total length: 650 mm Electric saw carriage separation Djdpfjy Af Tbox Ai Aeck

Condition: excellent (used), 3.2 kW motor Cutting height 7 cm With 45-degree angles Table width 50 cm Table length 60 cm Djdsy Aagpjpfx Ai Aock

Condition: used, Year of construction: 1995, functionality: fully functional, SCM si150 Panel Saw Specification: • Condition – used, after a comprehensive overhaul • Manufacturer – SCM • Model – si 150 • Sliding table length: 150 cm • Blade diameter: 300 mm • Machine equipped with a scoring unit • Main saw motor: 4.0 kW • Blade tilting: manual • Manual blade raising and lowering • Blade guard on spring support • Maximum cutting height: 95 mm • Side table dimensions: 85 x 60 cm • Extraction port diameter: 100 mm • Cart with wheels for machine relocation included • Weight: 480 kg • Year of manufacture: 1995 • Overall dimensions: 151 x 270 x 137 cm (W x L x H) • Transport dimensions: 151 x 125 x 137 cm (W x L x H) Additional information: Dsdpfx Aioyy Sq Us Ajck • The machine is in good technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Testing and demonstration on-site available • Free training on machine operation (at company headquarters) • The auction price does not include VAT or transport costs Financing and transport: • We organize transport with our MDD fleet, courier services, or external carriers • Financing available through leasing or a lease loan

Condition: excellent (used), Year of construction: 2014, I sell the format sliding table saw without scoring KUSING FPn MINI 1000 Year 2014. Sliding table length 1000mm / cutting length 1200mm. Max. cutting width on cross fence 1950 / 2850mm. Max. cutting width on parallel fence 1270mm. Motor 4,0 kW (5,5 HP). Djdpfeyc N Dcox Ai Ajck Max. saw blade diameter fi.300x30mm Main blade 4000 rpm. Saw aggregate tilting 0-45° EU-Product. Made in Slovakia. Fully working, including CE and full Documentation. Condition very good. Avialable immediately.

Condition: new, ALTENDORF F 35 Type 1 - 1000 Panel Saw Robust, powerful, high cutting height – ideal for solid wood! - New machine - available immediately - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large protective hood Double roller carriage 3,200 mm Scoring unit preparation Rip fence, cutting width 1,000 mm Angle and mitre fence 3,450 mm, without longitudinal compensation Dcjdextbtpjpfx Ai Aok Table extension/widening: powder-coated surface Saw blade tilt: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade Ø: 450 mm Screen size: 15 inches Working table height: 910 mm Extraction port Ø: 80 + 120 mm Including options: M45102 Rip fence 1000 mm Digit_X M64300 Front support roller M99008 Template holder

Condition: new, Saw blade diameter 255 mm Sawblade tiltable 45 ° Cutting height 75 mm Table dimensions 640 x 920 (ausgezogen) mm Dedpsu Imitjfx Ai Aeck Saw blade 30 mm Motor output 1,6 kW connected load frequency 230 V machine weight ab. 32 kg Dimensions (L/W/H) 720 x 1080 x 920 mm

Condition: good (used), Year of construction: 1986, functionality: fully functional, Sizing saw Altendorf TRK 45 Year of manufacture 1986 S/N 86-9-209 checked in our workshop for normal operating condition Gs Dkkmsng Etrjz Ssua carriage length: 1350 mm height and swivel adjustment manual with handwheel engine power: 5,5kW cutting width: 1250 mm 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 ( without scorer ) with scorer Automatic engine brake weight approx. 1100 kg Technical specification under reserve + 2 additional saw blades Dsdpsng Etrofx Ai Asck

Condition: new, Max saw blade diameter: 350 mm Max cutting height: 115 mm Worktable dimensions: 560x800 mm Aluminum trolley dimensions: 1200x360 mm Saw angle: 0-45° Max cutting height at 45° with 350mm saw: 80mm Main disc speed: 4000 rpm Dodpfx Aoi Dtyrei Aeck Motor power: 4 kW Power: 380V

Condition: new, Year of construction: 2026, Holzkraft panel saw with scoring saw Compact panel saw with a pivoting saw blade and a high-quality, anodized aluminum crosscut fence The cutting plane of the compact panel saw is directly on the sliding table Precision-guided aluminum crosscut fence, anodized as standard Large table extension guided on a telescoping arm and adjustable in length The standard table widening and extension allow for easy work with larger workpieces The large-sized saw unit made of gray cast iron is double-mounted on the cast iron table and guarantees stability, precision, smooth running, and a long service life Large work table made of ground gray cast iron, making it extremely robust and durable Smooth operation and precise cuts Aluminum crosscut fence Equipped with a tried and tested ball bearing system Dust and dirt resistant due to minimal contact point between the ball and trapezoidal rail 10-year HOLZKRAFT warranty on wear of the hardened guide rails Telescoping fence Extendable aluminum telescoping fence Angle adjustable With two professional folding fences Ek2a0i2ik Parallel fence Standard with fine adjustment and quick clamping Scope of delivery: Table extension Table widening Anodized aluminum crosscut fence Parallel fence with round bar guide and fine adjustment Model SC 2 classic Item No. 5504215 Technical data Table dimensions 1020 x 325 mm Table height 900 mm Fence length 1660 mm Cutting height max. 90° with scoring saw 100 mm Dcjdpeih Dwvofx Ai Aek Cutting height max. 45° with scoring saw 79 mm Rip width max. to the left of the saw blade 1270 mm Cutting width with parallel fence 900 mm Saw blade tilt 90° - 45° Saw blade diameter max. with scoring saw 315 mm Saw blade diameter max. without scoring saw 315 mm Scoring saw blade diameter (optional) 80 mm Main saw blade speed 4000 min-1 Scoring saw blade speed 7600 min-1 Electrical connection 400 V / 50 Hz Motor power 4.0 kW Dust extraction nozzle diameter 120 mm Dust extraction nozzle diameter saw blade guard 60 mm Weight 295 kg Location: In stock at 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1999, Sliding table saws Longitudinal and transverse saw for ps 400 Longitudinal and transverse saw for ps 400 Second hand 1999 Make: Longitudinal and transverse saw for ps 400 Model: Longitudinal and transverse saw for ps 400 Description: Longitudinal and transverse saw for ps 400 Producer of GOMAD Model / type of the machine ps 400 Year of production 1999 Machine category Longitudinal and transverse saw Main shield adjustable up / down and at an angle shield for the shield with sidecar cutting length on the trolley 1500 mm cutting width at the guide 1000 mm main engine 6 kW dimensions of the top 1020 x 1120 mm with extension with extension with a podcinakiem max diameter of the scoring blade 120 mm scoring spindle diameter 22 mm 0.75 kW scoring engine 3 types of rotation speeds 2800/4000/5000 rpm brake diameter of the extraction port 120 mm dimensions (length / width / height) 250 x 120 x 120 cm weight 935 kg Dsdpfjgap Szsx Ai Aeck

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm Djdpfx Aiefv Hphe Ajck weight ~ 320 kg

Condition: good (used), Panel saw, table saw, heavy precision circular saw, metal circular saw, cold circular saw -Sliding carriage: 200 mm -Speeds: 90-4000 rpm -Cutting width: 710 mm -Saw blade diameter: max. 260 mm Dcsdjctvp Tspfx Ai Ask -Max. Cutting height: 40 mm -Height adjustment -Transport dimensions: 1450/900/H1100 mm -Weight: 254 kg

Condition: used, for saw blade diameter up to approx.: 280 mm Dodpfeb Nwgnjx Ai Asck with a cutting height of approx.: 70 mm Saw blade speed: 2600 rpm Drive motor: AC 220 V, 1.47 kW Space requirement: 670 x 520 x 800 mm Weight: 31 kg