FleiKa gbr.

Condition: excellent (used), Year of construction: 2014, operating hours: 2,308 h, functionality: fully functional, table width: 500 mm, table length: 630 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of spindles: 1, number of slots in tool magazine: 41, Equipment: chip conveyor, documentation/manual, CNC Milling Machine HAAS UMC-750 TECHNICAL SPECIFICATIONS: • Date of manufacture: October 2013 • Power-on hours: 2 308 h • Number of axes: 5 (simultaneous machining) • X-axis travel: 762 mm • Y-axis travel: 508 mm Iisdpfx Afsz S H D Njuoh • Z-axis travel: 508 mm • B-axis travel: +110° to -35° • C-axis rotation: 360° • CNC control: HAAS • Max. spindle speed: 12 000 obr/min • Table dimensions: 630 × 500 mm • Distance from spindle nose to table surface: 102–610 mm • Tool magazine capacity: 40 + 1 tools • Max. power: 22,4kW • Chip conveyor • Machine weight: approx. 9 000 kg Machine in very good technical condition, connected to power – it can be inspected and tested on site by prior appointment. Professional loading is included in the price. Accessories, tooling and clamping devices shown in the photos are part of the offer only if listed under equipment. Technical data is for reference only and may contain inaccuracies. Subject to prior sale. Vertikales Bearbeitungszentrum

Condition: good (used), Year of construction: 2005, functionality: fully functional, Description: The machine is in good technical condition, and can be tested upon prior arrangement. It features a Haas CNC control system, often a 32-bit version for this model year. Travel distances for X/Y/Z axes are 1016 × 406 × 406 mm, or 40" × 16" × 16" in inches. Table dimensions are 1467 × 267 mm / 57.75" × 10.5". Spindle taper is CAT/CT 40 or BT 40. Spindle speed ranges from 0–4000 rpm. Spindle power is 5.6 kW / 7.5 HP. The spindle drive is belt-driven. Maximum torque is approximately 45 Nm at 1200 rpm. Distance from the spindle nose to the table is 102–508 mm / 4"–20". Rapid traverse rates for X/Y/Z axes are 5.1 m/min / 200 ipm. Maximum cutting feed rate is 5.1 m/min. There are 3 T-slots, each approximately 16 mm wide. Iiodpfx Afsz S H Afeueh

Condition: good (used), Year of construction: 2006, functionality: fully functional, Machine parameters: Swing over bed: Iiodoz S Hy Rspfx Afuoh 406 mm Max. turning length: 1219 mm Description: The machine is in good technical condition, and a test run is possible upon prior agreement. Haas CNC control. Max. turning diameter 406 mm / 16". Max. turning length 1,219 mm / 48". Distance between centers 1,219 mm / 48". Swing over cross slide / carriage approx. 282 mm / 11.1". X-axis travel 203 mm / 8". Z-axis travel 1,219 mm / 48". Spindle A2-6. Spindle bore 76.2 mm / 3.00". Spindle speed 0–2,000 rpm. Spindle power 12 HP / approx. 8.9 kW. Torque approx. 203 Nm at 150 rpm. Chuck usually 10" / 254 mm. Tailstock manual, depending on configuration. Weight approx. 2,087 kg. Machine dimensions approx. 2,515 × 1,727 × 1,981 mm (operating dimensions). Electrical connection 195–260 V, 3-phase / approx. 25 A or 1-phase 240 V / 40 A depending on configuration.

Condition: excellent (used), functionality: fully functional, controller manufacturer: Haas, Equipment: documentation/manual, 3-Axis Machining Center Manufacturer: Haas Type: VF-1 / VCE-500 Year of manufacture: 09-1998 Control system: Haas (retrofit) Operating hours: unknown Serial number: 16XXX Technical data: ----- - Table size: 660 x 356 mm - Travel distances X-Y-Z: 508 x 406 x 508 mm - Spindle: max. 7,500 rpm Iisdpjz Sy I Iefx Afush - Spindle power: 11 kW - Tool holder: SK40 - Tool magazine with 20 stations - Coolant system - Programmable coolant nozzle - Chip conveyor - Footprint (L x W x H): 2.60 x 2.30 x 2.50 m - Weight: approx. 3.2 t Accessories: ----- - Documentation - SK-40 holder set Special features: ----- - Retrofitted with a newer Haas M17.04B control system! - In top condition.

Condition: excellent (used), Year of construction: 2019, Traverses XYZ: 762 x 508 x 508mm, Ijdez Sqqmopfx Afueih 500mm x 500mm table, max table weight 300kg, table tilt +110°, -35°, 22.4kW, 15000rpm, BT40, 40 station tool changer, Through spindle coolant, Tool Setter, Programmable coolant,

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 700 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, number of axes: 3, This 3-axis Huron KX8 vertical machining center was manufactured in 2006. It features a Siemens 840D control unit, a spindle speed of 12,000 rpm, and a tool magazine capacity of 20 tools. The machine offers an X-axis travel of 700 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. If you are looking to get high-quality milling capabilities, consider the Huron KX8 machine we have for sale. Contact us for further details. • Table size: 800 x 600 mm Technical Specification Taper Size HSK 63 Iiedsz Spqropfx Afuoh

Condition: excellent (used), For sale: a robust WEMAS column milling machine, model FM23. Cast iron construction, very rigid, ideal for tool rooms and maintenance workshops. The machine is equipped with a 3-axis DRO D60-3V digital position readout and Rascher Nürnberg–München measuring scales. Table with longitudinal T-slots, coolant with a separate tank and pump. Vertical spindle with a precision collet and adjustable feed. Power supply: 3×400 V. The machine is complete, has undergone a recent inspection, runs smoothly, and is ready for testing under power. It shows normal signs of use – without any disqualifying play or looseness. Ijdpfx Aoz Slaqjfuoih Included in the price: 3-axis DRO display, scales on the X/Y/Z axes, coolant tank and pump, hoses, power cable, work light. Additional information from the photos: “WEMAS” and “FM23” nameplates, spindle setting correction plate, DRO panel with mm/inch functions, ABS/INC, calculator. Working parameters, spindle taper, and speed ranges to be confirmed on-site – I can measure the table and X/Y/Z travels. Loading with a forklift is possible. I can assist with organizing transport.

Condition: good (used), Year of construction: 2012, 3-axis machining center SPINNER VC 750, CNC Siemens 840D, year of manufacture 2012, serial number BV0446, chip conveyor. Iiedpoz R R Dxsfx Afujh

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, table load 500 kgs, Iiodpfx Aez R Rbdefujh spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 860 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC 620, table width: 560 mm, table length: 910 mm, overall weight: 4,500 kg, spindle speed (max.): 9,000 rpm, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, Manufacturer: Wemas Model: VZ860Star Year of manufacture: 2009 Control system: Heidenhain 620 Travel distances XYZ: 860/600/650 Tool changer: 24 positions Spindle speed: 9,000 RPM Iodpfxez R Amke Afuoih Weight: approx. 4,500 kg Tool holder: SK40 Sale is only to commercial businesses, without warranty or guarantee. Free on board (FOB).

Condition: good (used), Year of construction: 2011, XYZ: 760 x 610 x 610mm, Table 900 x 600mm, 21kW, Heidenhain TNC530, Ijdsz Rz Nqepfx Afujih 12000 rpm, 30 station ATC, BT40 taper, swarf conveyor, through spindle coolant,

Condition: excellent (used), Year of construction: 2017, operating hours: 14,000 h, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, SPINNER VC 750 – Year of manufacture 2017 Manufacturer: SPINNER Type: VC 750 Machine type: Vertical CNC machining center Control system: Siemens Sinumerik 840D sl / ShopMill Axes: 3 Working area: Travel in X-axis: 760 mm Travel in Y-axis: 460 mm Travel in Z-axis: 460 mm Table clamping area: 900 × 410 mm Max. table load: 350 kg Stiens Werkzeugmaschinen Main spindle: Max. spindle speed: 12,000 rpm Tool holder: SK 40 Spindle drive: approximately 11 kW or 17/10 kW, depending on the configuration Rapid traverse rate X/Y/Z: 36 m/min Industry Pilot Tool changer: Tool positions: 24; also 32 in certain configurations Tool changer: Dual-arm rapid tool changer Iijdpfx Afsz Rzzyjueh Max. tool diameter: approx. 130 mm Max. tool length: approx. 200 mm Max. tool weight: approx. 8 kg Stiens Werkzeugmaschinen Machine data: Machine weight: approximately 3,300–4,000 kg, depending on the configuration Dimensions: approximately 2,590 × 1,700 × 2,825 mm (without considering different accessory configurations) Coolant system and chip conveyor

Condition: good (used), Year of construction: 2016, functionality: fully functional, Haas control system, 5-axis machining center, Coolant through the spindle (CTS), 40-position tool magazine, Ijdpfxsz Rzapo Afuoih Spindle speed 12,000 rpm.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Travel (X/mm) 760 Iijdpfx Afez Rnngsujh Travel (Y/mm) 460 Travel (Z/mm) 460 Control System Type Siemens Sinumerik Tool magazine Yes Number of tool magazine positions 24 Spindle connection ISO 40

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 3-axis vertical machining center Year of manufacture: 2012 Iodpfxez Rkars Afujih Further details will follow.

Condition: used, Year of construction: 2011, x-travel 762 mm y-travel 460 mm z-travel 460 mm table surface area 1.000 x 460 mm control Okuma OSP 20 M rapid traverse 40/40/32 m/min table load 0,7 t turning speed range 12000 U/min power capacity - milling spindle 22/18,5 kW Iodpfxsz Nn Aze Afuoih max. torque on the spindle 198 Nm no. of tools in the magazine 32 Stück internal coolant system feed 20/43 bar tool taper BT 40 weight of the machine ca. 6,8 t dimensions 2.22 x 2,9 x 2,75 m CNC- vertical machining centre with internal coolant First installation 2014 - coolant through the spindel 15 bar, 20 ltr/min - air throug the spindle - chip conveyor - signal lamp - Dual tool change arm - external electric hand weel - tool lenght measuring and toolbreak detection - filter system - X- axis in gantry style - spindle oil cooler - thermal compensation spindel and bed - USB and Ethernet port - Hi-Cut Pro high speed control - 100 Zero offsets - thread milling

Condition: ready for operation (used), Year of construction: 2015, operating hours: 8,950 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, controller manufacturer: HAAS, controller model: CNC Control, workpiece weight (max.): 680 kg, total height: 2,570 mm, total length: 2,570 mm, total width: 2,510 mm, table width: 356 mm, table length: 914 mm, table load: 680 kg, overall weight: 3,600 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 8,950 h, spindle nose: CAT 40 / BT40, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, The Haas VF-2SS is a compact, high-speed 3-axis vertical CNC machining center. The “SS” stands for Super-Speed. This machine is installed and operational at our location and can be inspected while running! This HAAS VF-2 SS is equipped with: - SS (Super Speed) version. - 24-tool magazine. - Internal cooling (IKZ). - Chip conveyor. - Renishaw OTS tool probe. - Renishaw OMP40-2 3D probe. - Programmable coolant nozzle. - Air blow gun. Ijdoz Nhphopfx Afuoih - Coolant tank. - Original documentation.

Condition: used, Year of construction: 2019, x-travel 762 mm y-travel 508 mm z-travel 610 mm control MAX5 Hurco distance spindle nose and table 152 - 762 mm speed mainspindle max. 12.000 U/min power capacity - main spindel 13,4 kW max. Torque 214 Nm tool taper SK 40 DIN 69871 A table surface area 1.020 x 510 mm max. table load 1.500 kg T-slots 5 x 18 x 100 mm number of toolpositions 30 pos. tool taper SK 40 tool diameter max. 80 / 76 mm tool length - max. 300 mm weight of tools max. 7 kg rapid traverse X-axis 38 m/min rapid traverse Y-axis 38 m/min rapid traverse Z-axis 32 m/min total power requirement 24 kVA weight of the machine ca. 5,1 t dimensions of the machine ca. 4,0 x 4,1 x 2,8 m CNC-Machining Center Vertical HURCO - VMX 30i - Year 2019 / Commissioning May 2020 - only approx. 500 operating hours - Adaptipath Trochoidal milling for higher metal removal rates, controlled step-over, and residual material detection - Simulation graphics - Tool and material library - Pocket milling with islands - Synchronous tapping Iiedpfoz I T Rtox Afueh (Tapping without a compensating holder) - incl. 15x high-clamping force chucks BDV40-HMC20S-85 - incl. 3x tapping chucks BDV40-MGT6-80 - incl. mechanical centering vise BSM 250 - incl. 1x set of quick-change hardened grip jaws with grip strip - incl. various tap holders - incl. various drill bits and reducing sleeves

Condition: excellent (used), Year of construction: 2022, operating hours: 6,500 h, functionality: fully functional, overall weight: 4,710 kg, A wide range of accessories is included. Iodpfx Aoz I Rigjfujih

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, number of axes: 5, This DMG DECKEL MAHO DMC 60T was manufactured in 2005. A Universal machining centre, it offers robust construction and reliable performance for precision machining tasks. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60T Universal machining centre. Contact us for more information. Machine Benefits Technical Machine Benefits • Machine with nc rotary table and tool magazine for 60 tools: approximately 9610 kg • Belt filter system 900 l: approximately 850 kg • Installation weight of machine with max weight for workpiece, tools, and operating materials, belt filter system: maximum 11500 kg • B-axis complelty overhauled Extra Information Machine still under power // Contril unit: Heidenhain: MILL PLUS 2-fold pallet change. IKZ spindle with 12000 rpm, 40 bar Operating mode 4 for working with open door. Blum laser, with tool measurement and tool breakage control. Preparation for Blum 3D probe. Probe is not included in the scope of delivery. 900 liter cooling water tank with belt filter Iijdpfx Afoz I N E Tjush

Condition: used, Year of construction: 2014, Vertical high-speed machining center Manufacturer: DMG Mori Type: MILL TAP 700 Year of manufacture: 2014 Control system: Siemens 840D SL Travel ranges X/Y/Z: 700 x 420 x 380 mm Spindle speed max.: 24,000 rpm Tool magazine: 15 positions Weight approx.: 4,100 kg Automation with robot Manufacturer: Sontec Type: Sonflex Year of manufacture: 2023 Isdpfxsz I Inms Afueih Robot: Fanuc 121026

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Haas Machining Center 3 Axes + 1 Model VF-1DHE Year 2002 Iisdez Ir Nujpfx Afujh Documentation Available Includes 4-Axis Rotary Table Video Available Inspection Possible

Condition: used, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, feed length X-axis: 1,270 mm, feed length Y-axis: 660 mm, feed length Z-axis: 610 mm, controller manufacturer: Hurco, controller model: Ultimax, workpiece length (max.): 1,500 mm, workpiece width (max.): 660 mm, workpiece weight (max.): 1,300 kg, table load: 1,300 kg, rotational speed (max.): 10,000 rpm, CNC milling machine Hurco VMX 50 | Year of manufacture: 2006 | SK40 | Chip conveyor | Spare parts For sale is a Hurco VMX 50 CNC milling machine / CNC machining center, manufactured in 2006, from our machine inventory. The machine is in a well-maintained and good condition. It is ideally suited for workshops, job shops, as well as training and production companies. Technical data: - Manufacturer: Hurco - Model: VMX 50 - Year of manufacture: 2006 - Control: Hurco Ultimax - Travels X / Y / Z: 1,270 / 660 / 610 mm Iijdsz Iri Ijpfx Afuoh - Table size: 1,500 × 660 mm - Table load: approx. 1,300 kg - Tool holder: SK40 - Spindle speed: up to 10,000 rpm, depending on the model - Rapid traverse X / Y / Z: 30 / 30 / 20 m/min - Tool changer: 20-position - Internal coolant system: included - Coolant system: included - Chip conveyor: included Equipment: - Chip conveyor included - Various spare parts included - LAN-capable via existing WR box - Coolant system included Sale & Handling The machine is sold ex works. Pickup only. Inspection and demonstration under power are possible upon request. Loading can be arranged after consultation. Price: net plus statutory VAT. If you are interested, have any questions, or would like to arrange an inspection, please contact us.

Condition: good (used), Year of construction: 2012, Haas VF-2SSYT Year of manufacture: 2012 Spindle speed: 12,000 RPM CT40 taper Tool Set Carousel (TSC) Workpiece Probe System (WPS) Renishaw probing system 4th axis, wired Video available! Iodpez Ihc Rsfx Afueih

Condition: ready for operation (used), Year of construction: 2018, operating hours: 17,822 h, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table load: 250 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 4,900 W, number of axes: 4, This 4-axis Brother Speedio S700 X1 was manufactured in 2018. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 300 mm. The machine includes a table size of 1150 x 400 mm and a maximum table load capacity of 250 kg. If you are looking to get high-quality machining capabilities, consider the Brother Speedio S700 X1 vertical machining centre we have for sale. Contact us for further details. • Table size: 1150 x 400 mm • Spindle taper: 7/24 No. 30 (Big-Plus) Dual Contact / BT30 • Tool shank: MAS-BT / BBT30 • Retention knob: MAS-P30T-2 (30°) Iijdjz Hmn Nopfx Afujh • Tool changer: 21-tool carousel, total load capacity 35 kg • Tool change time (tool-to-tool): 0.8 s • Tool balance limit: 50 g • Rapid traverse rates: X 50 m/min, Y 50 m/min, Z 56 m/min • CNC control: CNC-C00 • Machine control indicated readings (recorded : Total operation time 17,822 h; Power-on time 33,212 h • Excluded equipment: External hydraulic unit Additional equipment • Hydraulic fixing table • Renishaw broken tool detector • Transformer / power supply unit • HAKUSAN chip conveyor • Emulsion mist separator SARA UC 1 SD