ZUP Badura Group sp zoo

Condition: used, Year of construction: 2009, Overview This LM S.p.A. multiline divider is a lane-dividing system for bottle conveying, built in 2009 by LM S.p.A. (Modena, Italy). It sorts a single-lane bottle stream into up to 4 lanes and is offered together with a complete bottle conveyor system manufactured by GEA Procomac - approximately 40 metres of multiline conveyors plus the divider unit. The system is still installed and under power in a German water and soft-drinks bottling plant, remains in production until 30 September 2026, and can be visited in operation. Technical data - Manufacturer of multiline divider: LM S.p.A. (Modena, Italy) - Manufacturer of bottle conveyors: GEA Procomac - Year of manufacture: 2009 - Machine type: multiline divider with bottle conveyor system - Lane division: up to 4 lanes - Capacity: min. 12,500 bottles per hour - Conveyor length: approx. 40 m (multilines) plus divider Scope of delivery - LM S.p.A. multiline divider - GEA Procomac bottle conveyor system, approx. 40 m - Drive units, guide railings and safety guards as installed Condition Hodpfxozuc Rxj Al Tenr The equipment is in very good condition. It is still installed and under power and remains in production until 30 September 2026; operation can be demonstrated on site. Availability Available from 7 October 2026. The equipment will be dismantled and loaded onto the buyer's trucks by the seller between 7 and 10 October 2026. Location: Germany.

Condition: used, Year of construction: 2009, Overview This SMI SK 450 T is a shrink packer for PET bottles, built in 2009 by SMI (Italy). It collates bottles into pack formations, wraps them in shrink film and shrinks the film in the integrated heating tunnel, at an output of up to 45 packs per minute. It handles 0.5 l bottles in 3x3, 0.75 l bottles in 2x3 and 1.5 l bottles in 2x3 formats. Hedezuc Nzspfx Al Tsnr The wrapping section is fully enclosed by safety guarding with viewing windows, and the machine is operated from a machine-mounted touchscreen control panel. It has been running as the shrink packer of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Technical data - Manufacturer: SMI (Italy) - Model: SK 450 T - Year of manufacture: 2009 - Machine type: shrink packer for PET bottles with integrated heating tunnel - Output: up to 45 packs/minute - Pack formats: 0.5 l (3x3), 0.75 l (2x3), 1.5 l (2x3) - Location: Germany Equipment - Integrated shrink tunnel (heating oven) - Film wrapping unit with film roll holders - Machine-mounted touchscreen control panel - Full safety enclosure with viewing windows Condition The machine is well maintained and has received extensive annual overhauls by the manufacturer. It is still installed and under power and remains in regular production, so it can be inspected in operation on site. Availability The machine remains in production until 30 September 2026. Dismantling and loading onto the buyer's trucks will take place between 7 and 10 October 2026 and can be carried out by the seller. The machine is located in Germany.

Condition: used, Year of construction: 2020, operating hours: 2,000 h, machine/vehicle number: LC665, Technical Specifications & Performance DataThis Tetra Pak A3/Compact Flex aseptic carton filling and capping line is configured for Prisma Edge packaging in the 250 ml format. It combines carton filling, cap application and Helix handling equipment for compact beverage production and industrial packaging operations. The available equipment is designed around the Tetra Pak filling platform and Cap30 DreamCap closure system.Manufacturer: Tetra PakFiller model: A3/Compact FlexMaximum production capacity: 9600 BPHPack format: 250 ml Prisma EdgeAvailable configuration: filler, Cap30 capper and Helix equipmentOperating hours: 2000Machine year: 2020Advanced Automation & Control SystemsThe equipment includes line control for coordinated operation of the available filling, closure application and handling sections. A controlled line architecture supports consistent product flow through the filling and capping process while allowing the individual modules to operate as an integrated packaging system. The listed configuration includes Filler, LC40, ACHX30 and Cap30 components.Production Line Integration CapabilitiesThis equipment is suitable for integration into an aseptic carton packaging line. The available filler, capper and Helix sections can be positioned with compatible upstream product preparation equipment and downstream carton conveying, accumulation, coding and secondary packaging machinery. Its Prisma Edge format configuration makes it relevant for beverage production applications requiring 250 ml carton packs.Machine typeManufacturer / modelYearFilling MachineTetra Pak A3/Compact Flex2020Capping MachineTetra Pak Cap30 DreamCap2020Various EquipmentTetra Pak Helix2020Machine Condition & Maintenance HistoryThe line is reported as running, with 2000 operating hours. The stated availability is limited to the filler, capper and Helix equipment. This condition provides a practical basis for buyers planning a second hand aseptic packaging installation, line extension or replacement project within an existing industrial packaging environment.Operational Performance & VersatilityThe A3/Compact Flex platform is intended for high-output carton filling and closure application. The Cap30 DreamCap system is matched with the listed carton format, supporting a consistent filling-and-capping sequence for Prisma Edge packs. With a maximum stated output of 9600 BPH, the equipment can support structured beverage production where compact retail carton formats are required.Installation Requirements & Site PreparationInstallation should be planned as part of a complete aseptic carton packaging layout, with appropriate product supply, utility connections, hygienic process interfaces and downstream pack handling. Site preparation should allow access for operation, cleaning, maintenance and format-specific material handling. Compatible line controls and conveying should be assessed when integrating the available modules into a used bottling line or broader industrial packaging... Hsdpfezucgmex Al Tsnr

Condition: used, Year of construction: 1999, Capacity: 350 hl/h Hodpfxjzty Tuj Al Tenr Operating over pressure: 24 bar Desing temperature: 104 °C Length: 1,6 m Width: 0,85 m Height: 2,2 m Weight: 5000 kg Features: product pump H: 9,8 bar (Hygiana CN II, GEA, 350 hl/h), booster pump H: 4,7 bar (EURO Hygia CN II, GEA, 350 hl/h), hot water pump H: 1,3 bar (Maxa -DIN 80-2ßß 4/4, GEA, 700 hl/h)

Condition: used, Year of construction: 1998, Velcorin dosing system for the cold sterilisation of beverages during bottling. Velcorin is drawn from a storage tank and injected into the product stream via a dosing pump. System out of service. Ideal as a source of spare parts. Additional title: Cold sterilizing Capacity: 7200 l/h Maximum permissible dosing rate: 20 ml/hl Hnjdpfxjzty S Do Al Tor Features: Velcorin storage tank; compressed air connection; dosing pump (Cibus 32 lubricant); flow/volume measurement module; pneumatic control block; centrifugal fan; control panel with buttons and warning lights; various valves, actuators and sensors

Condition: used, Year of construction: 1992, Two-stage counterflow plate heat exchanger: Section 1: Heating or regeneration: Product/product Product inlet 6°C, outlet 66.2°C, Flow rate 300 hl/h Product inlet 72°C, product outlet 69.8°C Flow rate 300 hl/h Section 2: Heating: Product/hot water Product inlet 66.2°C, product outlet 70°C, flow rate 300 hl/h Hot water inlet 72°C, hot water outlet 69.8°C, flow rate 500 hl/h Additional title: two-stage heat exchanger Capacity product: 300 hl/h Capacity hotwater: 500 hl/h Hnjdpjzty Ryofx Al Tor Max. pressure: 21 bar Working temp.: 110 °C Systemic volume: 695 Liter Length: 3250 mm Width: 910 mm Height: 2160 mm Weight: 2656 kg Material: plates: AISI 316, thickness 0,6 mm, Clip-on gasket-material: Nitrile Features: Section 1: heat exchanger surface 160,58 m², content 317,2 / 317,2 liter, pressure drop 1,2 / 1,2 bar Section 2: heat exchanger surface 14,88 m², content 29,3 / 31,7 liter, pressure drop 0,2 / 0,5 bar

Condition: used, Year of construction: 2019, Fruit reception: Water bath, fruit conveyor with water shower, chopper Packing press type H65: Capacity: 1,200 kg/h Yield up to 75% 24 press inserts (65 x 65 cm) 22 press cloths (100 x 100 cm) Dimensions: 2,330 x 840 x 2,060 mm Additional title: Fruit reception with water bath, fruit conveyor, chopper and packing press Hnodpezty Ixjfx Al Ter Capacity: 1200 kg/h Features: Water bath, fruit conveyor with water shower, chopper, packing press with 24 press inserts and 22 press cloths

Condition: used, Year of construction: 1983, Schenk ZHF Kieselguhrfilter Additional title: Kieselguhr filter Capacity: 3000 l/h Max. pressure: 6 bar Max. temp.: 20 °C Vessel content: 680 l Operation / Control: manual operation, with buttons / switches on the control box Hodpfx Alozty Iro Tonr Material: stainless steel Position: Fixed to the floor on a frame Features: CIP heat exchanger with fittings, dosing vessel, dosing pump, control cabinet, electric motor for shaft drive

Condition: used, Year of construction: 2000, Insulated, steam-heated V4A stainless steel tanks, most recently used as CIP cleaning tanks. Additional title: vertical, conical stainless steel tanks Capacity: 3000 l/tank Width: 1,55 m Height: 3 m Weight: 600 kg Material: V4A stainless steel Position: vertical, standing on feet Base construction: cylindrical tanks with dished top and conical bottom Features: 2 stainless steel tanks 30 hl each, insulated, heatable by steam Hnodpfx Alszty H Ij Tor

Condition: used, Year of construction: 2019, Pasteuriser Profi PA SH: Capacity: 600 l/h 48 kW heated with gas Automatic temperature controller Stainless steel tank, V4A Dimensions: 2,100 x 880 x 1,300 mm Bag-In-Box dosing unit Profi: Capacity: 600 l/h including weighing unit with automatic stop when the specified filling quantity or weight is reached. Bags with up to 10 litres Additional title: bag-in-box filling Hnodpfeztyyuox Al Tor Capacity: 600 l/h Max. bag volume: 10 l Power: 48 kW Material: vessel from V4A stainless steel Features: gas burner, automatic temperature controller, weighing unit with automatic stop

Condition: used, Year of construction: 2002, Additional title: Wort cooling Hnsdpfx Ajztywtel Ter

Condition: used, Year of construction: 2003, Hop dosing unit comprising 6 stainless steel containers with screw-on lids, mounted on a stainless steel frame. Hjdpfx Aoztywgsl Tonr Additional title: Stainless steel vessels for the delivery of hop pellets and extract Total volume approx.: 60 l Width: ca. 300 mm Height: ca. 800 mm Material: Stainless steel 1.4301 (AISI 304) Base construction: completely piped on base frame Features: 6 hop dosage vessels, 1 perforated plate for hop extract can

Condition: used, Carbonisation reconditioned by ACM. Automated by Mommert in 2016. Additional title: Baujahr: 1991 - 2016 Capacity: 10000 l/h CO2 regulating range: 7 g/l Length: 2,6 m Width: 0,75 m Height: 2,0 m Hnedpfxsztykmj Al Ter Weight: 400 kg Operation / Control: Siemens Simatic HMI Features: CO₂ compensation line DN100 (approx. 14.2 m long); control cabinet (with HMI touchscreen, S7-300 control module, switching power supply, 2 universal transmitters); ACM continuous online CO₂ measurement; CO₂ flow meter; pneumatic control valve; Air sterilizing depth filter; 2/2-way pneumatic angle seat valve, PT 100; pressure transmitter; air filter; sampling valve; additional piping, valves, and fittings

Condition: used, Year of construction: 1992, 3 component mixing unit. Mixing plant for non-alcoholic beverages to mix: carbonated water, liquid sugar and base product. Year of construction: 1992 Output: 120 hl/h Additional title: 3 component; years of manufacture 1992 - 1997 Capacity: 12000 l/h Ready-to-drink Operation / Control: Siemens OP7 Material: Stainless steel Hjdpfx Aljztx Udj Tenr Base construction: Frame with height-adjustable feet Features: 3 x 400 l stainless steel vessels; mixing tank; Bran + Lübbe dosing pump type N-C32; product pump

Condition: used, Separator for clarifying fruit juice Additional title: Plate centrifuge with self-emptying drum Drum speed: 5000 rpm Density liquid: 1000 kg/m³ Hnjdpoztx S Nefx Al Tjr Density solid: 1200 kg/m³ Features: Centrifuge, motor, sludge discharge, control cabinet

Condition: used, Year of construction: 1991, Cylindroconical fermentation and storage tank - Ammonia or glycol cooled, 1 x cone cooling, 3 x frame cooling. - Swivelling cone - Stainless steel - insulated - Standing frame, short - Cleaning air fitting with safety valve - Vacuum valve Additional title: Refrigerated stainless steel pressure tank for outdoor installation Capacity: 96450 l Operating pressure: 2 bar Hnedpfx Alsztx S Ae Ter Length: approx. 12400 mm Width: approx. 3950 mm Height: approx. 3950 mm Weight: 6220 kg Material: Stainless steel 1.4301 Position: vertical Base construction: short supporting skirt Features: Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination with safety valve; vacuum valve; temperature measurement

Condition: used, Year of construction: 1993, Additional title: Microfiltration Hjdpsztwz Nsfx Al Tsnr Material: stainless steel Base construction: on stainless steel frame with feet Features: 32 filtration modules, pumps, pipes, valves, control cabinet

Condition: used, Year of construction: 2010, “Cleaning in Place” (CIP) system, consisting of the following components: - 400-liter stainless steel tank serving as a hydrostatic circulation tank - 7.5-kW feed pump (Packo) for pumping 25 m³/h against 4.1 bar - 4.0 kW return pump (Packo) for pumping 25 m³/h against 2.0 bar - Shell-and-tube heat exchanger (Weinbrenner) for heating a flow rate of 25 m³/h from 55 °C to 75 °C with 790 kW - 4-channel chemical dosing system (ProMinent) for lye, acid, disinfectant, and additive - Temperature measurement - Conductivity measurement (E+H) - Inductive flow meter (E+H) - Control cabinet with touchscreen display - Various piping and valves Additional title: Cleaning system for cleaning pressurised tank cellars Volume circulation tank: 400 l Length: 2,5 m Width: 3,0 m Hodpfx Alsztwu As Tonr Height: 2,9 m Operation / Control: Simatic S7 Material: contact surfaces from stainless steel Position: on stainless steel frame with feet Features: Circulation tank; 2 centrifugal pumps; shell-and-tube heat exchanger; 4-channel chemical dosing system; control cabinet with touch panel; flow measurement; conductivity measurement; temperature measurement; various pipes and valves

Condition: used, Year of construction: 2017, Overview This sleeve labelling and shrinking system was manufactured in 2017 by Germany Krones. The system consists of a Krones Sleevematic sleeve applicator and a Krones Shrinkmat shrink tunnel, designed for the application and shrinking of sleeve labels on bottles and containers of various formats. Hjdpfjztan Eox Al Tjnr Technical data - Formats: Various bottle and container formats - Application: Sleeve labelling and sleeve shrinking - Configuration: Krones Sleevematic sleeve applicator + Krones Shrinkmat shrink tunnel - Labelling technology: Sleeve labels Scope of Delivery - Sleeve applicator | Krones | Sleevematic | 2017 | Sleeve label application machine - Shrink tunnel | Krones | Shrinkmat | 2017 | Sleeve shrinking system

Condition: used, Year of construction: 2018, Overview This DUETTI case packing group combines a case erector, a case packer and a top-loading case sealer for American-style cases, built by Duetti Packaging (Galliera Veneta, Italy) in 2018 and commissioned at the end of 2018. It packs bottles in 12 x 33 cl and 6 x 75 cl formats at approx. 6,000 bottles/h (33 cl) or approx. 3,000 bottles/h (75 cl), around 10 cases/min. The group is still installed and under power at a brewery in France and can be visited in production on request. Technical data Hnjdpezrpwtofx Al Tsr - Manufacturer: Duetti Packaging (Galliera Veneta, Italy) - Model: FORMER 20H + PACKER 10 + CHMSS - Year of manufacture: 2018 (commissioned end of 2018) - Machine type: case former - case packer - case sealer group, American-style cases (carton) - Case formats: 12 x 33 cl and 6 x 75 cl - Capacity: approx. 6,000 bottles/h (12 x 33 cl), approx. 3,000 bottles/h (6 x 75 cl) - approx. 10 cases/min - Gluing: hot melt, Meler Micron 5 unit Equipment - FORMER 20H case erector: carton magazine, vacuum gripper, bottom folding and gluing with 4 nozzles, pressure cylinder and pad, 90° discharge towards the packing section - PACKER 10 case packer: 4-lane bottle distributor, batch formation via sensors, gripper head with inflatable tulip grippers, Cartesian-type movements - CHMSS top-loading case sealer: 4 glue nozzles and pressure rollers - Meler Micron 5 hot-melt unit - Case transport through former and sealer via rough-surfaced side belts (no push bars); conveyor in the filling section - Inclined transfer belt between filling and sealing, convertible to horizontal by removing the sealer foot extensions - Technical documentation (operating manuals, electrical schematics) and CE declarations of conformity Please note: case marking / coding is not included in the scope of delivery. Condition Used - in production: the group is still installed and under power and can be visited in operation on request. Availability From February 2027 - the line remains in production until the end of January 2027 and is dismantled thereafter. Location: France.

Condition: used, Year of construction: 2003, Overview This TIRELLI KS12/660 is a rotary rinsing machine for glass bottles, manufactured in 2003 by TIRELLI (Porto Mantovano, Italy). It previously operated within a complete 2,500 bph glass bottling line for kombucha production and handles formats from 250 ml to 750 ml with a 26 mm neck finish. The machine can rinse with air, water, inert gas or another rinsing medium. The machine is enclosed in stainless steel framing with transparent safety guard doors and features a rotary gripper carousel, infeed and outfeed conveyor sections and a control cabinet with push-button panel. Technical data - Manufacturer: TIRELLI (Porto Mantovano, Italy) - Model: KS12/660 - Year of manufacture: 2003 - Machine type: rotary bottle rinser, glass - Rinsing media: air, water, inert gas or other rinsing product - Formats: 250 ml / 330 ml / 750 ml Hnodpfx Alozrnrpj Ter - Neck finish: 26 mm - Capacity: up to 2,500 bph Condition Used - in production until June 2026; already dismantled and stored. Availability Immediately available. Location: France. Handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Year of construction: 2011, Overview This M+F KEG-Technik MICROMAT M 1/1-F KeyKeg is a semi-automatic filling machine for one-way KeyKegs, built in 2011 by M+F KEG-Technik (Bottrop, Germany) and used in a Belgian brewery. The machine fills 20 l and 30 l KeyKegs at 50-60 kegs per hour. It became redundant when the brewery switched its production from one-way KeyKegs back to returnable stainless steel kegs. It has already been dismantled, is in storage and can be inspected on request. Technical data - Manufacturer: M+F KEG-Technik - Model: MICROMAT M 1/1-F KeyKeg - Year of manufacture: 2011 - Machine type: semi-automatic KeyKEG filling machine - Capacity: 50-60 KeyKegs per hour - Container formats: 20 l and 30 l KeyKEG - Fitting type: KeyKEG fitting Hedpfx Aozrihxjl Tjnr - Connection voltage: 230/400 V, 50 Hz Equipment - EC Declaration of Conformity (Machinery Directive 2006/42/EC) - Technical documentation Condition Used. The machine has already been dismantled and is stored. Availability Immediately available. Location: Belgium. Handling and truck loading are included.

Condition: used, Year of construction: 1998, Overview This SIDEL SBO 10/14 Series 1 is a rotary PET stretch blow moulding machine with 10 blowing stations, producing up to 12,000 bottles per hour. It has been used for the production of 1.5 L and 2.0 L PET water bottles with PCO 1810 neck finish. The machine is still installed and in production, can be visited in operation, and is available for immediate sale. Technical data - Manufacturer: SIDEL - Model: SBO 10/14 Series 1 - Machine No.: 688 - Year of manufacture: 1998 - Machine type: rotary stretch blow moulding machine for PET bottles - Blowing stations: 10 - Capacity: up to 12,000 bph - Formats: 1.5 L and 2.0 L PET bottles - Neck finish: PCO 1810 - Installed power: 310 kW - Electrical supply: 400 V / 470 A Condition Hnsdpfx Aezrhr Ajl Tor Used - in production, still installed and under power. The machine remains a reliable solution for water, beverage and other PET packaging applications. Availability Immediately available. Location: Slovenia. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Year of construction: 2018, machine/vehicle number: LC664, Used complete craft beer brewery 750LTechnical Specifications & Performance DataThis complete bottling line for beer combines essential packaging machinery for craft-scale beverage production with professional utilities to ensure consistent quality and low oxygen pickup. Engineered for small to mid-size breweries, the line delivers dependable performance in a compact, semi-automatic configuration that supports efficient changeovers and straightforward operation.Production speed: 600 bottles/hour (semi-automatic operation)Process stages: Bottle rinsing and sanitizing; isobaric-style preparation (vacuum pre-evacuation and CO2 purging); filling and capping; labeling with integrated printingContainer types: Designed for Glass and PET bottle handlingProduct compatibility: Ideal for Beer production applicationsCarbonation: Inline beer carbonation unit for controlled CO2 dosingUtilities: Air compressor with dryer; glycol refrigeration/chiller system; CIP cleaning and sanitization systemRefrigeration package: Glycol tank 2000 L with Bitzer refrigeration compressor unit and Wilo variable-frequency glycol pumpConstruction: Food-grade materials with stainless steel product-contact componentsAdvanced Automation & Control SystemsThe semi-automatic modules are designed to streamline essential operations while preserving operator control. The filler and capper integrate two-stage vacuum pre-evacuation, CO2 purging, and foam generation prior to capping to minimize dissolved oxygen. The labeling machine features a self-adhesive system with an integrated printer for on-the-fly coding and batch identification. Safety interlocks and emergency stop functions support operator protection during use.Semi-automatic control on each module for intuitive operationIntegrated printer on the labeling machine for date/lot codingLow-oxygen filling workflow: vacuum cycles, CO2 purge, foam before cappingDesigned for quick cleaning and routine maintenanceProduction Line Integration CapabilitiesThis used bottling line integrates easily with upstream brewery operations, including bright beer tanks and carbonation systems. It can operate as a standalone packaging cell or be tied into existing conveyors and QA checkpoints. The semi-automatic design supports flexible bottle formats common in craft beer without complex retooling.Standalone or inline operation with existing brewery equipmentCompatible with standard beer bottle geometriesSuitable for beer applications within broader industrial packaging and beverage production environmentsExpandable with additional conveyors, inspection, or secondary packaging modulesMachine typeManufacturer / ModelYearRinsing Machine Hnodpszrgqdjfx Al Tjr

Condition: used, Year of construction: 2003, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 5,000 bph List of machines Blow moulder | Nissei ASB | NB-40MC | 2003      Hjdpfx Aozqvcyel Tenr Preforms feeder      Preforms tipper      Transporters | AVE | 2004      Injection and blowing | Nissei ASB | PF4-1BH |2000      Dryer Moretto | 2000   Loader Moretto | 2000   Heater Moretto | 2000   Transporters | AVE | 2004      Lot Coder | Marken | Smartlase 110i | 2009      Rinser - Filler - Capper | GyM | Tribloc 9-12-3| 2012      Labeller|Auxiemba | Basic 720-6-HM-iz  | 2010 | 7000 bph Shrink Packer | SMI | ST-2000 | 2009 | 30 packs / min Handle applicator | SMI HA 25Sx | 2012 | 25 packs /min Palletizer | Lapeyra | RP1C | 1992 (retrofit as CE RD1215) Wrapping|Impropak | Girospak 747 SBP | 1990 (retrofit as CE RD1215) Transporters | AVE | 2000