ITALGARD srl

Condition: used, Year of construction: 2020, functionality: fully functional, measuring range X-axis: 3,000 mm, measuring range Y-axis: 3,000 mm, total height: 400 mm, total width: 800 mm, total length: 800 mm, overall weight: 50 kg, input voltage: 220 V, Equipment: documentation/manual, type plate available, Mobile coordinate measuring system KEYENCE WM-3000 (Wide Area Coordinate Measuring Machine). The system was delivered in November 2020 and is in well-maintained, fully functional condition. This is a complete measuring system including accessories, software, and transport cases. Lhjdpfx Aoy E Rv Hod Asf Scope of delivery • WM-3000 measuring head • WM-P3000 probe • WM-C3000 control/camera module • WM-S1 camera tripod • 3x WM-B1 batteries • WM-BC1 charger • OP-99032 power cable • Laptop with installed WM measuring software • Transport cases • Calibration certificate (09/2020) • Inspection report (Inspection Result) Condition • Fully functional • Visually well-maintained • Calibration from 09/2020 (factory recalibration recommended) • Sold from ongoing operations The WM-3000 is an optically guided 3D coordinate measuring system for large-volume measurement of components in the range of 300 mm to 3,000 mm. Measurement is performed using an active probe with camera tracking. Suitable for manufacturing, toolmaking, plant engineering, and quality assurance.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 3,000 mm, measuring range Z-axis: 800 mm, Measuring Range X Axis: 1,000 mm Y Axis: 3,000 mm Z Axis: 800 mm Granite Guides Air-bearing Axes Measuring Accuracy Linear measurement deviation approx. 1.3 µm plus L/400 depending on configuration and calibration status Lhodpoy Ewgxofx Ad Asf Probing Systems Renishaw probe heads possible Touch trigger and scanning PH10, TP20, SP25, SP80 depending on equipment Workpiece Weight Permissible table load up to approx. 2,000 kg depending on configuration Control CNC control with handheld operating unit Software Metrosoft CM version 3.112 WENZEL Quartis R16 Electrical Supply 230 V 50/60 Hz Power consumption approx. 1 kVA Pneumatic Supply Compressed air 6 to 10 bar filtered and dry

Condition: excellent (used), The probe was used on a Zeiss Prismo Ultra as a replacement probe with few operating hours. Lhsdpfey Epm Iex Ad Aof

Condition: ready for operation (used), functionality: fully functional, repeat accuracy: 0.002 mm, table load: 50 kg, rotary table diameter: 500 mm, The offer consists of the following components: VL-770 Probe Head – High-resolution optical 3D scanner VL-700 Control Unit – Control and evaluation unit, including software interface VL-C35 Cover – Light protection hood VL-A3D Software Package – Measurement and evaluation software (German) OP-88145 Calibration Plate – Reference plate VL-H3G Module – Geometric dimensioning and tolerancing (GD&T) module VL-H3R Module – CAD conversion module VL-B1 Accessory – Calibration ball gauge OP-99031 Cable – AC power cable TECHNICAL DETAILS Repeatability (σ): 2 µm Measurement accuracy: ±10 µm Measurement resolution: 9 million measurement points Measuring range Low magnification: Ø300 × H200 mm High magnification: Ø70 × H50 mm Work Table Rotary table: 500 mm Ledpfx Adey Eglqe Ashf Rotation mechanism: 360° XY movement of object stage: Ø200 mm Tilting mechanism: up to 45° Maximum load capacity: 50 kg MACHINE DETAILS Weight Weight of control unit: 3.7 kg Weight of object table: 26 kg Weight of cover: 5.5 kg Weight of measuring unit: 19.6 kg EQUIPMENT Original software and manuals Calibration plate Protective hood Monitor, PC, keyboard, and accessories

Condition: used, Year of construction: 2023, controller manufacturer: Sonstige, controller model: MCOSMOS, _____ Description: Year of manuf. : 2023 Control : Sonstige MCOSMOS Movement X/Y/Z : mm Technical Data: Measuringrange in X/Y/Z:500 x 500 x 500 mm Tablesize:755 x 730 mm Workpieceweight (max.):120 kg Equipment/Accessory: Probesystem:Renishaw PH 10MQ Measuringhead:Renishaw SP25M Scanningmodul:Renishaw SM25 Changesystem:Renishaw FCR25 Operation:Joystickbox-M Lhjdpfoy Ea Hzox Ad Ajf Further Accessory:Misc. stylus, calibration sphere, clampingsystems

Condition: ready for operation (used), X-axis: 505mm, y-axis: 405mm, z-axis: 405mm, number of M8 threaded holes: 9, max. workpiece height: 545mm, max. table load: 180kg, accuracy: ISO 10360-2, resolution: 0.1µm, guide system: air bearings on all axes, traverse speed CNC mode: 8-300mm/s (max. 520mm/s), joystick rapid traverse: max. 80mm/s, slow: 0.05mm/s, measuring speed: 1-8mm/s (CNC), acceleration: 0.13g (max. 0.23g), measuring table material: granite, table dimensions: 638x860mm, compressed air consumption: approx. 50l/min at 0.4MPa, length: 1122mm, width: 1082mm, height: 2185mm, weight (incl. table and control): 515kg. An on-site inspection is possible. Lodpfx Adey Duq Eo Ajhf

Condition: used, Year of construction: 2003, Coordinate Measuring Machine Wenzel LH 54 (Year of Manufacture 2003) in well-maintained and fully functional condition. The machine is built on a stable granite structure combined with air-bearing guides. This allows the portal and axes to move almost frictionlessly and smoothly over the granite—a proven foundation for high measurement accuracy and repeatability. The LH 54 is designed for reliable use in quality assurance as well as in series production and delivers consistent measurement results even during continuous operation. Before delivery, the machine is inspected and test-run by our service technicians in Remscheid, ensuring full functionality. The system is currently powered on and can be viewed and demonstrated at any time. PC System (modernized): After purchase, a completely new PC system will be installed, meeting WENZEL’s current requirements. This system is fully up to date and thoroughly tested before the machine is finally handed over to the buyer. Optional Services (upon agreement): - Installation and commissioning of the measuring machine within NRW - Issuance of a factory calibration certificate Ljdpfx Adey Dcivs Ashf - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Maximum measuring volume diagonal: 4,660 mm - Determination of probing uncertainty according to DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training for the WM | Quartis measuring software - Custom programming for your components Additional Information: On request, the machine can be retrofitted with the proven Renishaw SP25M probe. The retrofit includes additional service work and complementary hardware components, which will adjust the purchase price accordingly. Additional software modules, custom adaptations, as well as individual accessories and clamping systems are available on request—optimally tailored to your specific measurement requirements. Measuring range X: 500 mm Measuring range Y: 1.000 mm Measuring range Z: 400 mm Measurement uncertainty: Eo = 2,5 + L/300 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2040 Basic PC System: Windows 11 (current configuration) Probing system: TP20 Probe head: PH10T Probe module: 1 × TP20 Standard Force Module head interface: PHC10-3 PLUS Probe interface: PI200 (Combi) Joystick: HT400 Exchange bridge: MCR20 (empty) Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck Included transport frame: On loan

Condition: like new (used), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, measuring range X-axis: 100 mm, measuring range Z-axis: 500 mm, warranty duration: 19 months, total height: 1,170 mm, type of input current: AC, total width: 600 mm, total length: 850 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 500 mm, overall weight: 250 kg, input voltage: 230 V, table width: 450 mm, table height: 110 mm, table length: 600 mm, feed length X-axis: 100 mm, feed length Z-axis: 500 mm, Equipment: documentation/manual, type plate available, We are offering this nearly new Mitutoyo Avant FTA - H4 D4000-D contour/roughness measuring instrument, year of manufacture (2022). According to the nameplate, the machine was built in 2022 but was only delivered to us and put into operation for the first time in November 2025. It has been used once since then and is therefore like new. Lhedpfx Asy Dcfkjd Aof All original accessories are included, as well as the transport cases for both measuring arms. The software key is also provided. If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2008, functionality: not functional, Faro Gage Plus measuring arm with 6 axes Arm length: 4 ft (approx. 1.2 m) Accuracy: 5+8L/1000µm Lhodpfx Adey A Tgpo Asf Includes measuring table, accessories, and corresponding transport case User manual and manuals included No software included!!!

Condition: excellent (used), Year of construction: 2023, Mobile 3D coordinate measuring device Camera, manual probe with display Max. measuring length 10000/3500/3500 mm Certified measuring range 3000/1500/1500 mm Lhjdpfxey Aypko Ad Ajf Triple camera Integrated probe camera Measuring accuracy ±(28 + 5 L/1000) μm* Repeatability ±10 μm* Accessories

Condition: good (used), total height: 1,360 mm, total width: 1,100 mm, total length: 1,000 mm, -KOM 3179- Offered here is a measuring and inspection plate made of hard stone. Dimensions: approx. 1100 mm x 1000 mm x 1360 mm. Table height: approx. 900 mm. Lhedpey Auvlefx Ad Aof

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,415 mm, measuring range Z-axis: 1,000 mm, The machine was around 6 years complete overhauled and its control technology was brought to the newest status. Technical details: Distance between portal columns: 1440mm Lhodpfx Aey Amfrsd Asf X-travel (cross): 1200mm Y-travel (longitudinal): 2415mm Z-travel (vertical): 1000mm Feeler head: Vast Gold Regularly maintenanced through company Zeiss With housing

Condition: used, used, robust marking-out and spotting plate Lhjdoy Ahwpopfx Ad Ajf Table surface: 750 x 1000 mm Working height: 800 mm

Condition: good (used), Year of construction: 2002, measuring range X-axis: 1,205 mm, measuring range Y-axis: 2,005 mm, measuring range Z-axis: 1,005 mm, Type: Coordinate Measuring Machine Manufacturer: Mitutoyo Model: CRT-A 122010 Year of Manufacture: 2002 Serial Number: N0001301 Includes PC and software, probe set (as shown in photos), JSBOX-M Type A control unit, Renishaw measuring head (PH10MQ, TP200), and UC240H controller. A set of transport locks is supplied with the machine. Last calibration: 12.09.2024 CRYSTA-Apex C 122010 – Technical Description The CRYSTA-Apex C 122010 is a high-precision coordinate measuring machine (CMM) designed for inspecting medium- to large-sized components. The system features a configurable design for increased rigidity and is also available with vibration isolation for accurate measurement of heavy workpieces. Measuring range (X/Y/Z): 1,205 × 2,005 × 1,005 mm Measuring error (MPEE): 1.9 + 3L/1000 µm (standard accuracy) Operating temperature range: 18 – 22°C Configuration for heavy workpieces (optional vibration isolation version): - Suitable for measuring workpieces up to approx. 5 tons - Reinforced base structure for enhanced rigidity - Integrated vibration isolation system Ljdpfjyzxcyox Ad Aohf Extended specifications (heavy-duty configuration): - Maximum workpiece weight: approx. 11,023 lbs (5,000 kg) - Machine weight: approx. 17,196 lbs (7,800 kg) - Air supply requirement (vibration isolator): approx. 0.45 MPa (minimum 0.55 MPa supply) This machine is particularly suitable for applications such as mold and automotive component inspection, where high precision and stability under heavy loads are critical. No guarantee; data according to OEM datasheet.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 201502530269, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, table load: 560 kg, Equipment: documentation/manual, type plate available, ZEISS CONTURA G2 7/7/6 – VAST XXT TL1 Year of Manufacture: 2015 | Commissioned: 2016 | Immaculate Condition | Extremely Low Operating Hours We are offering for sale a ZEISS Contura G2 coordinate measuring machine (CMM) with a measuring range of 700 × 700 × 600 mm, equipped with a VAST XXT TL1 scanning probe head. The device comes from a controlled laboratory environment and was used exclusively on-demand, single-shift operation, never on a production line – resulting in exceptionally low actual usage and outstanding technical condition. 🔹 Basic Information Manufacturer: ZEISS Model: Contura G2 Measuring Range (X/Y/Z): 700 / 700 / 600 mm Year of Manufacture: 2015 Commissioned: 2016 Technical and Visual Condition: Perfect Measurement Error MPE (E0) = 1.7+L / 350 μm 🔹 Configuration and Accessories ✅ ZEISS VAST XXT TL1 active scanning probe head ✅ Stylus rack / magazine ✅ Set of measuring styli (mainly diameters ⌀ 0.6 mm and ⌀ 1.5 mm) ✅ Reference sphere ✅ BP26_SE control console 🔹 Usage History Device used exclusively in laboratory conditions Occasional, project-based (on-demand) use Single-shift operation, no serial or production work As a result, the machine exhibits extremely minimal mechanical wear 🔹 Service and Calibration ✅ Service and calibration exclusively by official ZEISS technicians ✅ Regular maintenance according to manufacturer guidelines ✅ No third-party interventions ✅ Device fully operational Lhsdeyzmbdopfx Ad Aof 🔹 Status 📍 Machine available immediately 🔍 Viewing possible 📄 Full documentation included ✅ Buyer arranges transport

Condition: not inspected (used), Year of construction: 1997, Attention: Sale on behalf of the seller ● Serial number: CMM970103039 ● Availability: By arrangement ● Payment terms: Advance payment – by bank transfer ● Internal no.: S3 Ljdpfx Adeyyx Tpe Aehf Technical data: ● Measuring range X/Y/Z: 500/550/515 mm Scope of delivery: ● Available manuals ● Available measuring accessories as shown in the pictures Dimensions & weight: ● Installation dimensions L x W x H approx.: 1500 x 1500 x 2400 mm ● Weight approx.: 1000 kg Additional notes: ► On request, we can offer transport to the place of destination ► The offer price is net, plus VAT ► Goods are sold with exclusion of any warranty ► Technical data subject to change without notice ► Subject to prior sale ❗ Sale exclusively to businesses ❗

Condition: used, Year of construction: 2008, Coordinate Measuring Machine Wenzel XO 55 (Year of Manufacture 2008) in well-maintained and fully functional condition. The machine is based on a stable granite structure combined with air-bearing guides. This allows the portal and axes to move almost frictionlessly and smoothly over the granite—a proven foundation for high measurement accuracy and repeatability. The XO 55 is designed for reliable use in quality assurance as well as in series production and delivers consistent measurement results even during continuous operation. Before delivery, the machine is inspected and test-run by our service technicians in Remscheid, ensuring full functionality. The system is currently powered on and can be viewed and demonstrated at any time. PC System (modernized): After purchase, a completely new PC system will be installed, meeting WENZEL’s current requirements. This system is fully up to date and thoroughly tested before the machine is finally handed over to the buyer. Optional Services (upon agreement): - Installation and commissioning of the measuring machine within NRW - Issuance of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Maximum measuring volume diagonal: 4,660 mm - Determination of probing uncertainty according to DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training for the WM | Quartis measuring software - Custom programming for your components Additional Information: On request, the machine can be retrofitted with the proven Renishaw SP25M probe. The retrofit includes additional service work and complementary hardware components, which will adjust the purchase price accordingly. Additional software modules, custom adaptations, as well as individual accessories and clamping systems are available on request—optimally tailored to your specific measurement requirements. Special features: Core drilling for installation with rotary-tilt frame Included transport frame: On loan Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Exchange bridge: SCR200 (empty) Joystick: HT400 Probe interface: PI200 head interface: PHC10-2 Probe module: 1 × TP200 Standard Force Module Probe head: PH10T Probing system: TP200 PC System: Windows 11 (current configuration) Controller: WPC2030 Installed software: WM | Quartis R2026-1 Measuring range Z: 500 mm Measuring range Y: 1.000 mm Lsdpjyyulnsfx Ad Aohf Measuring range X: 500 mm

Condition: used, functionality: unexamined, Equipment: lighting, Used ZEISS AXIO Zoom V16 microscope servo-controlled setup. Microscope inspection setup consisting of AXIO microscope and camera (Zoom V16), and ZEISS control system with servo-driven XYZ positioning and lens. Manufacturer: ZEISS | AXIO Ledpfx Ajyybkwed Aohf Models: AXIO Zoom V16, ICc5 camera | Zeiss EMS 3 controller, CL 9000 LED microscope lighting, SYCOP3, MA-R-C Voltage: 4x 220-230V (50/60Hz) Includes computer with installed software, monitor, mouse, keyboard. Frame made of aluminium and stainless steel.

Condition: excellent (used), Year of construction: 2011, 1.0 pc. used image processing measuring device Manufacturer: MITUTOYO Ljdeyxxy Tspfx Ad Ashf Model: QS200Z Year of manufacture: 2011 Technical data: see photos.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 196-477 NL, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 400 mm, Machine in excellent condition from a measuring room Ljdpsyxxphsfx Ad Aohf

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: LH-M064774, measuring range X-axis: 650 mm, measuring range Y-axis: 750 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 270 kg, Offered for sale due to upgrade (we require a larger model): Wenzel LH65 3D Coordinate Measuring Machine with accessories New metrology software system Quartis R2022-2 Used but in very good condition Fixed price: EUR 22,500 net, ex-works 95369 Untersteinach, collection only Payment required before or upon collection Machine will remain in operation until early April 2026 and demonstrations are possible until then Technical data: - Model: LH 65/CNC - Year of manufacture: 2005 - First commissioning: 04/2006 - Serial number: LH-M064774 Lhsdpfxeyxv Eae Ad Ajf - Weight: 1,270 kg - Permissible workpiece weight: 500 kg - Regular maintenance and calibration carried out - Unit operated/located in a climate-controlled measuring room - Monthly usage: approx. 1 week Measurement range and accuracy: - Measuring range (X/Y/Z): 650x750x500 mm - Usable table area: 1450x850 mm - Measurement uncertainty according to DIN EN ISO 10360-2 for TP200 probing system - Measuring accuracy (MPE E): 2.6/1000 + (L/300) - Temperature range: 20°C +/- 2K, 1.0K/h, 1.0K/m - Operating temperature: 15°C to 30°C - Relative humidity: 10% - 70% - Supply pressure: 6-10 bar, pre-filtered, quality as per ISO 8573-1, Class 4 or better Equipment: - CNC control - Renishaw probing system - Base plate made of natural hard stone with minor repairs (see photo) - Horizontal air bearing system LH on measuring table - Active pneumatic damping (instead of elastomer vibration dampers) - PC system & software: - Upgraded to WM Quartis R2022-2 (new price: EUR 23,740.50) - 4-channel PCIe interface card - USB keyboard, black, German layout - One LED monitor full HD (1080p) – 61 cm, 24” - Front panel PC Si-Esprimo P757 Accessories: - Reference ball, diameter 25 mm, ceramic, with M10 mounting - Small stylus kit M2 - PH10T motorized indexing probe head - PHC 10-3 Plus control unit for indexing head - 1x TP200 - 1x SF module - 1x SCR 200 - Various M2 styli (one piece each diameter 0.5mm, 1.0mm, 2.0mm, 4.0mm) - M2 rotating swivel joint - M2 stylus holder, length 19 mm - 1 hex wrench and 2 pin wrenches - Stylus holder in case - PC and controller cart with integrated desk - HAT-400 hand control panel - Documentation All information provided to the best of our knowledge and belief. Subject to change, errors, and prior sale. Sale without warranty.

Condition: ready for operation (used), Year of construction: 2020, An optical 2D coordinate measuring machine Werth is available. Measuring range X/Y: 400mm/200mm, electrics: VDE 0113, magnification: 0.2x. Machine dimensions X/Y/Z: approx. 800mm/600mm/1200mm, weight: approx. 200kg. Including two computers, software, and one replacement glass pane. Documentation available. An inspection on site is possible. Lsdpfsyxq U Ajx Ad Ashf

Condition: excellent (used), Year of construction: 2008, measuring range X-axis: 700 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 500 mm, ZEISS ACCURA MASS 7/9/5 Year of manufacture: 2008 Refurbished: 2025 Measuring range: X = 700 mm, Y = 900 mm, Z = 500 mm MPE E = 1.6+L/333 at 18-22 °C R0 = 1.7 Lhedpfx Adoyxdmfe Asf MPE-P = 1.7 MPE-THP = 2.5/50 sec RONt = 1.7 Machine features, equipment: C99 SR VII Controller automatic temperature compensation VAST XT GOLD sensor system probe changer magazine selectable probe accessories selectable calibration sphere HP Workstation with monitor Software: Calypso Basic, latest version Options: Calypso freely selectable Further accessories

Condition: used, functionality: fully functional, measuring range X-axis: 510 mm, measuring range Y-axis: 410 mm, total height: 2,150 mm, total width: 1,100 mm, total length: 980 mm, travel distance X-axis: 510 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 340 mm, overall weight: 1,000 kg, input voltage: 400 V, table width: 650 mm, table length: 890 mm, DEA SWIFT coordinate measuring machine (CMM) in used, fully functional condition. Robust bridge-type coordinate measuring machine with granite measuring plate, ideal for precise 3D measuring tasks in industry and quality assurance. The machine offers a measuring range of approximately 510 x 410 x 340 mm (X/Y/Z) and is equipped with a touch probe system. Measuring accuracy is approximately 2.5–3.5 µm, enabling high-precision measurement of workpieces and components. Ledpfxoyw R U Tj Ad Ajhf The stable granite measuring plate (approx. 890 x 650 mm) and bridge construction ensure high rigidity and repeatability. The air-bearing guides provide smooth and precise movement. Machine dimensions: approx. 980 x 1100 x 2150 mm Machine weight: approx. 1000 kg Fields of application: • Quality assurance • Toolmaking • Mechanical engineering • Metalworking The machine is immediately ready for operation and ideally suited for precise measuring tasks in industrial applications. Inspection possible by appointment.

Condition: excellent (used), Year of construction: 2020, Measuring head: LM -1100 Lhjdpfjywk Nqjx Ad Ajf Image sensor: B/W CMOS, 1", 20 megapixels Display: 10.4" LCD monitor (XGA: 1024x768) Measuring mode with wide field of view: 225 x 125 mm High-precision measuring mode: 206 x 106 mm For further data, please refer to the PDF file!