Baltgina, UAB

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: API429763, overall weight: 490 kg, fuel type: electric, volume flow: 216 m³/h, pressure (max.): 13 bar, Atlas Copco GA18VSD screw compressor with variable speed drive for compressed air supply in workshops and industry. TECHNICAL DATA – AS PER NAMEPLATE Manufacturer: Atlas Copco Model: GA18VSD Year of manufacture: 2010 Motor power: 18.5 kW / 25 hp Maximum permissible operating pressure: 13 bar Volumetric flow rate Qv as per nameplate: 60 l/s / 3.6 m³/min Power connection: 400 V, 50 Hz, 3 phases Weight: 490 kg Serial number: API429763 EQUIPMENT AND CONDITION Frequency-controlled drive (VSD) and sound-dampening enclosure. Technical and visual condition according to available information: very good. Maintenance and service history available; last reported service: 24.01.2025. Psdpfez Hck Hex Ac Aegt Current operating hours are not available. An integrated refrigeration dryer is not confirmed and is not offered as a guaranteed component. LOCATION AND INSPECTION 65618 Selters, Germany. Inspection and collection by arrangement. Coordinate the scope and procedure of loading before collection. Price: EUR 5,750 net, negotiable, plus statutory VAT. Reference: RQ449789FA

Condition: new, Year of construction: 2025, functionality: fully functional, Fan motor power - 5.5 kW Pgsdpfxez Hckye Ac Aet Filtration area - 14.15 m² Number of filter bags - 15 Dimensions - 255x90x310 cm Power supply - 380 V Rated capacity - 6500 m³/h Year of manufacture - 2025

Condition: used, Year of construction: 2006, Overview Pgodpsz Hckmefx Ac Aot This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Innopro warmer-cooler - Year of manufacture: 2006 (control cabinet 2007) - Machine type: thermoregulator for heating or cooling wine, skid-mounted - Product: wine - Throughput: 9,900 l/h (99 hl/h) - Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at 18,328 l/h - Heating section: wine from 9 °C to 18 °C via a warm-water circuit (25 °C to 21 °C, 20,516 l/h), which is heated by hot water from 100 °C to 55 °C - Plate heat exchanger: Thermowave, 3 sections, 71 plates, total heat transfer area 6.1 m² - Plate heat exchanger ratings: operating pressure 10 bar, test pressure 12.5 bar, max. operating temperature 100 °C - Power supply: 400 V, 50 Hz, 3/N/PE, rated current 25 A; control voltage 24 V DC - Overall dimensions: approx. 3,100 x 1,850 x H 2,330 mm Equipment - Thermowave plate heat exchanger with cooling, wine heating and warm-water heating sections - Warm-water circuit and membrane expansion vessel - Centrifugal pumps, including a Hilge stainless steel pump - Pneumatically operated valves and a pneumatic control valve with positioner - Pressure gauges and process instrumentation - Freestanding KHS stainless steel control cabinet with touch panel - Stainless steel skid frame with interconnecting piping Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: used, mileage: 811,100 km, power: 217 kW (295.04 HP), first registration: 02/2012, fuel type: diesel, empty load weight: 7,800 kg, maximum load weight: 10,200 kg, overall weight: 18,000 kg, axle configuration: 4x2, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: air, loading space length: 6,650 mm, loading space width: 2,500 mm, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, onboard computer, soot filter, tail-lift, trailer coupling, Renault Midlum 300.18 4x2 Machinery Transporter First registered: 2/2012 881,100 km Short cab Manual transmission Air conditioning Trailer coupling Powerful 300 hp 6-cylinder engine with 7146cc displacement Air suspension front and rear Tires 305/70 R22.5, approximately 50% tread Flatbed: 6650mm (5750mm straight + 950mm angled) Ramp, split: 3550mm (2450mm + 1100mm) Loading width: 2500mm Loading height: 1100mm Winch Permissible total weight: 18,000 kg Unladen weight: 7,800 kg Payload: 10,200 kg Export/net price: 16,900 Euros Pgodpoz Hckasfx Ac Ast All information without guarantee, subject to change.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, loading space length: 18,000 mm, loading space width: 2,540 mm, loading space height: 1,700 mm, total length: 18,000 mm, total width: 2,540 mm, total height: 1,700 mm, suspension: air, tire size: 435/50-R19.5, Equipment: ABS, - BPW axles - EBS - Lift axle - Air suspension - Disc brakes Available directly from stock: MAX200 with a flat loading ramp, lowered, capable of carrying up to 12,000 kg and vertically positionable, extendable by 4.5 m, equipped with a trailing steering axle and a lift axle: Technical data MAX200-N-3A-13.50-FTR-19.5-2.54 Total weight: 45,000 kg Coupling pressure: 18,000 kg Axle load: 27,000 kg Coupling height (loaded): 950–1050 mm Loading area length: 13,500 mm Extendable by: 4,500 mm Axle distance: 1360/1405 mm Vehicle overall width: 2,540 mm Total weight depends on coupling pressure. Loading area: Loading area in extendable design with pneumatic locking. The loading platform can be lowered hydraulically at the rear by approx. 2100 mm. Load capacity of the rear vehicle in horizontal position: 6 t. Lowered: Can be driven with an axle load of 12 t. 2 pairs of lashing points (LC 5000 daN). 1 pair of lashing points (LC 10000 daN). 6 pairs of lashing points that fold outwards (LC 5000 daN). 2 pairs of lashing points that fold outwards (LC 10000 daN). 1 pair of horizontal lashing points at the rear (LC 5000 daN). Recesses in the outer frame of the loading platform for attaching lashing straps (LC 2000 daN). Tire pressure monitoring system (TPMS) according to ECE R 141. BPW axles with disc brakes. Tires 435/50 R 19.5 Options: • Red and yellow air couplings on the galvanized front connection plate. • 2 wheel chocks with holder. • Galvanized steel partition, approx. 1,600 mm high (approx. 35 kg), EN12642-XL • Loading area made of hardwood. • Hardwood floor on the hydraulic loading table. • 1 pair of aluminum ramps, type: VFR 105, 1,500 x 450 x 120 mm (L x W x H). • Holder for aluminum ramps under the ramp (approx. 88 kg). • 1 spare wheel holder under the loading area on the right. • Movable profile for attaching separate aluminum ramps at the rear of the semi-trailer. • Operating manual and description on a USB stick. • Holder for a rotating beacon at the rear, right and left of the vehicle. • Under the gooseneck and at the rear, on the left and right, a holder for warning signs with socket. • Electro-hydraulic unit (approx. 45 kg). • 6 pairs of recesses in the loading area floor for WADER container locks, for 1 x 20', 2 x 20', 1 x 40' or 1 x 45' container (approx. 90 kg). • 10 pairs of tubes for stanchions (approx. 100 x 50 mm) in the outer frame of the loading area floor (approx. 30 kg). • 3 pairs of stanchion profiles, mounted crosswise in the loading area floor, for stanchions (100 x 50 mm) (approx. 95 kg). • Galvanized widening elements, extendable by approx. 230 mm per side (approx. 262 kg). • Lift axle on the front axle, controlled by TEBS E depending on axle load and loading condition (± 69 kg). • 4 warning signs (width ± 423 x 423 mm), extendable by ± 400 mm, each with one LED position light (± 25 kg). • Rope hooks (8 mm), approx. 500 mm below the edge profile of the gooseneck and the loading area floor (± 2 kg). Axle configuration Tire size: 435/50-R19.5 Psdpfx Acoz Hci Ns Asgt Axle brand: BPW DISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread left: 100%; Tire tread right: 100% Rear axle 2: Max. axle load: 9000 kg; Tire tread left: 100%; Tire tread right: 100% Rear axle 3: Max. axle load: 9000 kg; Steered;...

Condition: excellent (used), mileage: 499,790 km, power: 355 kW (482.67 HP), first registration: 01/2021, fuel type: diesel, wheelbase: 4,150 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 6,510 mm, total width: 2,550 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, parking heater, = Additional Options and Accessories = - (Roof) spoiler - Aluminum fuel tank - Climate control - Bunk - Air horn - Radio/CD player - Side mirrors with electric adjustment - Transceivers - Sun visor - Digital speedometer = Additional Information = Cab: one and a half Number of cylinders: 6 Engine displacement: 12,902 cc Unladen weight: 8,819 kg APK (Technical Inspection): valid until 01/2027 Technical condition: very good Psdpfez Hci Asx Ac Asgt Optical condition: very good Damage: none License plate: 83-BRB-7

Condition: used, Year of construction: 2006, Overview This KHS Innopack CA-1, built in 2006, is a carton erector that forms cartons from flat blanks and closes their bottom with hot-melt glue. Blank stacks are fed on a roller conveyor into the magazine; suction grippers pick each blank, erect it, fold the inner bottom flaps, apply glue with a Robatech hot-melt unit, close and press the outer flaps and discharge the carton onto the outfeed roller conveyor. The machine is still installed in a wine bottling and packaging line and can be inspected on site. Technical data - Manufacturer: KHS - Model: Innopack CA-1 - Year of manufacture: 2006 - Machine type: carton erector with bottom gluing - Glue system: Robatech Concept hot-melt unit with glue nozzles for the bottom flaps - Power supply: 400 V, 3 Ph, 50 Hz, 15 A - Compressed air: min. 5 bar operating pressure - Overall dimensions (L x W x H): 4,550 x 3,450 x 2,720 mm - Blank infeed: roller conveyor with stainless steel rollers, roller width 1,000 mm, infeed clearance 800 x 450 mm - Outfeed: roller conveyor with stainless steel rollers, roller width 300 mm, 3,050 x 650 x 880 mm Equipment - Stack preparation with automatic loading of the blank magazine - Blank magazine with lifting device, side guides and front and rear stops - Pick-up and erecting stations with vacuum suction grippers and vacuum unit - Folding, gluing, closing and pressing devices for the carton bottom - Side and height adjustment by handwheel for different carton sizes - Enclosure with windowed safety doors - Operator panel with display, keypad, start/stop, key switch and emergency stop; operator texts in French - Control cabinet and pneumatic service unit - CE marked; operating manual (Dutch) available Pgodpfxoz Hcivj Ac Aet Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: excellent (used), working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/bottom/universal two axes heads regulation spindles diameter 40mm spindles speed 6000 RPM variable regulated feeder digital displays of working dimensions electric regulation of pressure rolls Pgjdpfjz Hcipex Ac Aet pneumatic pressure of feeding rolls grooved table

Condition: used, empty load weight: 6,540 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2020, next inspection (TÜV): 02/2020, loading space length: 7,300 mm, loading space width: 2,354 mm, loading space height: 1,660 mm, loading space volume: 27 m³, tire size: 385/65 R22,5, wheelbase: 1,310 mm, Equipment: ABS, Color: RAL 7035 Light Gray Disc brakes EBS (Electronic Braking System) Pgsdpjz Hciiofx Ac Ajt Payload: 32,460 kg Air suspension with lifting function Floor: 5 mm - Walls: 4 mm ROTOS axles Lift and lower mechanism Foldable underrun protection Rollover tarp Platform Subject to errors and omissions.

Condition: excellent (used), functionality: fully functional, mileage: 37,350 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: automatic, wheelbase: 4,035 mm, overall weight: 3,500 kg, empty load weight: 2,255 kg, maximum load weight: 1,245 kg, first registration: 05/2025, next inspection (TÜV): 09/2028, loading space length: 4,070 mm, loading space width: 1,870 mm, loading space height: 1,932 mm, fuel tank capacity: 90 l, emission class: euro6e, color: white, number of seats: 3, number of previous owners: 1, Year of construction: 2025, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, hill-start assist, immobilizer system, lane keeping assist, navigation system, onboard computer, parking sensors, power assisted steering, second-hand vehicle warranty, sliding door, soot filter, start-stop system, traction control, truck registration, Rear wing doors (opening angle 270 degrees), Techno package, USB connection (dual), audio navigation system: digital radio DAB+, connected services, 10" touchscreen (Apple CarPlay and Android Auto), Bluetooth hands-free system, automatic climate control, Heavy worksite package, jack, reinforced rear suspension, winch for spare wheel, spare wheel in roadworthy condition, tires: all-weather/all-season tires, Grip Control Additional equipment: Airbag, passenger side, airbag, driver side, exterior mirrors, electrically adjustable and heated, both sides, exterior mirrors, standard, up to vehicle width 2200 mm, battery 95 Ah, short digital roof antenna, rear parking assist (acoustic), trailer stabilization program, driving assistance system: post-collision system, driving assistance system: rollover protection system, driving assistance system: adaptive load control (LAC), traction control system (ASR), driving assistance system: pedestrian detection and warning, cup holders in front and storage space, urea tank (AdBlue): 19 liters, rear wing doors without glazing, body/superstructure: high-roof standard van, fuel tank: 90 liters, radiator grille frame, black glossy, cargo area partition, model update, engine 2.2 liters - 132 kW Blue-HDI FAP CAT, wheelbase 4035 mm, low emissions according to emission standard Euro 6e, sliding door, cargo/passenger compartment, right side, safety package, black box (event data recorder, EDR), seat cover/upholstery: fabric, seats in the cab: double passenger seat (including automatic seat belt), seats in the cab: driver's seat with lumbar support, start/stop system, trim in the cargo/passenger compartment: half-height, tie-down points in the cargo area, warning system for seat belts in the front, permissible gross weight 3.50 t. Pgodpez Hcicsfx Ac Aot

Condition: used, functionality: fully functional, empty load weight: 6,900 kg, maximum load weight: 29,900 kg, overall weight: 36,800 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2001, loading space volume: 26 m³, total length: 8,150 mm, total width: 2,550 mm, suspension: air, Minerva Euro2000S semi-trailer 26 cbm tipper with sliding tarpaulin air suspension 3 axles ROR axles GVWR 36,800 kg - payload 29,900 kg Total length of semi-trailer: 8.15 m Width: 2.55 m 1st axle height-adjustable Tires: 50% tread (385/65 R22.5) Export net price: 10,500.00 Euro Pgsdpfx Acez Hchxj Ast All information subject to change without notice; no guarantee.

Condition: excellent (used), mileage: 821,259 km, power: 330 kW (448.67 HP), first registration: 10/2019, fuel type: diesel, tire size: 355/50 R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 6,040 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, parking heater, = Additional options and accessories = - (Roof) spoiler - Aluminum fuel tank - Climate control - Sleeper cab - Radio/CD player - Side mirrors with electric adjustment - Communication devices - Sun visor - Digital speedometer Pgjdpfx Asz Hchfjc Ajt = Additional information = General information Cab: simple License plate: 33-BNV-4 Technical information Number of cylinders: 6 Engine displacement: 10,837 cc Unladen weight: 7,727 kg Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 355/50 R22.5; Max. axle load: 8000 kg; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle: Tire size: 295/60 R 22.5; Max. axle load: 11,500 kg; Tire tread depth left: 20%; Tire tread depth right: 20% Condition Technical condition: very good Optical condition: very good Damage: none

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, spindle speed (max.): 10,000 rpm, type of input current: three-phase, grinding wheel diameter: 250 mm, overall weight: 8,100 kg, feed rate X-axis: 20 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 20 m/min, travel distance X-axis: 380 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 280 mm, grinding spindle motor power: 14,000 W, table length: 500 mm, table width: 330 mm, input voltage: 400 V, CNC Tool grinding machine SCHNEEBERGER Gemini DMR TECHNICAL CHARACTERISTICS: Year of manufacturing: 2014 CNC control: FANUC 31i B5 Software installed: Quinto Qg1 Colour touchscreen: Yes Number of axes: 5 Stroke X axis: 380 [mm] Max. Stroke speed X axis: 20000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Y axis: 300 [mm] Max. Stroke speed Y axis: 5000 [mm/min] Resolution Y axis: 0.0001 [mm] Stroke Z axis: 280 [mm] Max. Stroke speed Z axis: 20000 [mm/min] Resolution Z axis: 0.0001 [mm] Table length: 500 [mm] Table width: 330 [mm] Grinding spindle attachment: HSK-50 Max. grinding wheel speed: 10000 [rpm] Grinding spindle motor power: 14 [kW] Max. diameter grinding wheel: 250 [mm] Pgsdpfx Acoz Hcg Io Ast Weight: 8100 [Kg] EQUIPMENT INCLUDED: x1 8-position grinding wheel changer x8 coolant supports x1 tool probe x1 FANUC LR Mate 200iC 5L 6-axis tool-loading robot x1 set of robot grippers x1 pallet for robotic tool loading/unloading x3 HEIDENHAIN linear scales on the X, Y and Z axes x1 electrical cabinet air-conditioning unit x1 spindle chiller x1 fire suppression system (to be inspected by the buyer through a qualified organization) x1 set of 4 lifting brackets x1 set of technical manuals x1 parameter backup on USB flash drive *The SCHUNK collet holder and the 2 grinding wheel holders shown in the photos are not included Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening/grinding tools such as milling cutters, taps and drills. Machines similar to the following brands: Blohm, ELB, Ewag, Favretto, Fenix, GER, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer and Walter. Also consider cylindrical and surface grinding machines, lathes, machining centres and milling machines.

Condition: good (used), Year of construction: 1993, operating hours: 4,313 h, power: 22 kW (29.91 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 6,100 mm, throat depth: 300 mm, distance table to ram: 500 mm, clearance between the columns: 5,500 mm, oil tank capacity: 350 l, overall weight: 26,000 kg, Max. pressing force: 320 t Bending length: 6100 mm Distance between uprights: 5500 mm Control system: MNC 95 c Maximum ram stroke: 250 mm Max. distance table/ram: 500 mm Overhang: 300 mm Table width: 250 mm Closing speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Oil capacity: 350 l Pgedpfxoz Hcgzo Ac Ajt Operating hours: 4312 h Voltage: 380 V / 50 Hz Total power consumption: 22 kW Machine weight approx.: 26 t

Condition: used, Leybold Trivac D4B vacuum pump with a single-phase motor, 230V, 50Hz. Pgodpfxoz Hcguj Ac Aot

Condition: good (used), Year of construction: 1999, Saw with planing head unit Pgodpfx Asz Hcgnoc Aot Cutting length: 3020 mm Year of manufacture: 1999 Equipped with a rear support table and stop with positioning indicator Space requirement: 4.78 x 1.56 m

Condition: used, Leybold Trivac D8B vacuum pump with a single-phase motor, 230V, 50Hz. Psdpfsz Hcgbox Ac Aogt

Condition: used, functionality: unexamined, Year of construction: 2023, load capacity: 2,000 kg, lifting height: 200 mm, fuel type: electric, fork length: 2,000 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 105 kg, total length: 2,380 mm, total width: 540 mm, fuel: electricity, SONSTIGE OSE2500 – Electric low-lift pallet truck TECHNICAL DATA Lifting capacity: 2.000 kg Lifting height: 200 mm Fork length: 2.000 mm Drive: Elektro 24V Pgjdpez Hcf Refx Ac Aet Tyres: Tandem Polyurethan / Gummi Service weight: 105 kg Length: 2.380 mm Width: 540 mm Year of manufacture: 2023 Internal no.: 1700300 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: unexamined, Year of construction: 2023, load capacity: 2,000 kg, lifting height: 200 mm, fuel type: electric, fork length: 2,000 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 105 kg, total length: 2,380 mm, total width: 540 mm, fuel: electricity, SONSTIGE OSE2500 – Electric low-lift pallet truck TECHNICAL DATA Lifting capacity: 2.000 kg Lifting height: 200 mm Fork length: 2.000 mm Drive: Elektro 24V Tyres: Tandem Polyurethan / Gummi Service weight: 105 kg Length: 2.380 mm Width: 540 mm Year of manufacture: 2023 Pedpjz Hcf Dsfx Ac Ajgt Internal no.: 1700301 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: unexamined, Year of construction: 2023, load capacity: 2,000 kg, lifting height: 200 mm, fuel type: electric, fork length: 2,000 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 105 kg, total length: 2,380 mm, total width: 540 mm, fuel: electricity, SONSTIGE OSE2500 – Electric low-lift pallet truck TECHNICAL DATA Lifting capacity: 2.000 kg Lifting height: 200 mm Fork length: 2.000 mm Podpfx Aoz Hcfwoc Ajgt Drive: Elektro 24V Tyres: Tandem Polyurethan / Gummi Service weight: 105 kg Length: 2.380 mm Width: 540 mm Year of manufacture: 2023 Internal no.: 1700302 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: unexamined, Year of construction: 2023, lifting height: 200 mm, fuel type: electric, fuel: electricity, SONSTIGE OSE2500 – Electric low-lift pallet truck Pgsdpfxoz Hcfqs Ac Ajt TECHNICAL DATA Lifting height: 200 mm Drive: Elektro 24V Year of manufacture: 2023 Internal no.: 1700303 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: unexamined, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 200 mm, fuel type: electric, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 72 kg, total length: 1,500 mm, total width: 540 mm, fuel: electricity, TVH TRP0007 – Electric low-lift pallet truck TECHNICAL DATA Lifting capacity: 2.500 kg Lifting height: 200 mm Fork length: 1.150 mm Drive: Elektro 24V Tyres: Tandem Polyurethan / Gummi Service weight: 72 kg Length: 1.500 mm Podpfxez Hcfks Ac Ajgt Width: 540 mm Year of manufacture: 2025 Internal no.: 1700306 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: unexamined, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 200 mm, fuel type: electric, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 72 kg, total length: 1,500 mm, total width: 540 mm, fuel: electricity, TVH TRP0007 – Electric low-lift pallet truck Pjdpfx Acoz Hcfds Aegt TECHNICAL DATA Lifting capacity: 2.500 kg Lifting height: 200 mm Fork length: 1.150 mm Drive: Elektro 24V Tyres: Tandem Polyurethan / Gummi Service weight: 72 kg Length: 1.500 mm Width: 540 mm Year of manufacture: 2025 Internal no.: 1700307 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: unexamined, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 200 mm, fuel type: electric, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 72 kg, total length: 1,500 mm, total width: 540 mm, fuel: electricity, TVH TRP0007 – Electric low-lift pallet truck TECHNICAL DATA Lifting capacity: 2.500 kg Lifting height: 200 mm Fork length: 1.150 mm Drive: Elektro 24V Tyres: Tandem Polyurethan / Gummi Service weight: 72 kg Length: 1.500 mm Width: 540 mm Year of manufacture: 2025 Internal no.: 1700308 Location: 14974 Ludwigsfelde bei Berlin Pjdpfx Acez Hcd Ts Asgt Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), lifting capacity 200 kg lifting speed 4 m/min motor power 0.45 kW remote control operation safety button chain 5x15 mm Pgsdpfxez Hccvj Ac Ajt year of production 2004