Vurcon CNC

Condition: good (used), Year of construction: 2012, Control system Heidenhain 620. Including probes. Table 1200 x 560 mm Axe X 1035 mm Axe Y 560 mm Axe Z 510 mm Max. workpiece weight 1000 kg Spindle revolutions 14000 rpm Machine dimensions 2820x3210x2700 mm Machine weight 5500 kg Iaslhcewz Rc Sjcqqjw

Condition: excellent (used), Year of construction: 1997, Ultimax 3-4 control system with two color screens (text and graphics) Travel X/Y/Z: 1020/510/610 mm Speed: 8000 rpm Tool magazine for 24 tools, SK 40 DCF software Islswzy N Iehccqqjaw

Condition: used, Year of construction: 2016, CNC vertical machining center Manufacturer: FEELER Model: NBP-1000A Year of manufacture: 2016 Control: Siemens Sinumerik 828D Travel (X/Y/Z): 1,000 x 610 x 600 mm Main spindle: 10,000 rpm Spindle hours approx.: 6,000 Tool interface: SK40 DIN 69871 Tool magazine: 30-position Coolant system Separate coolant tank: 250 L Through-spindle coolant (IKZ) Chip conveyor Hinged belt conveyor Table, pallets + pallet storage Preparation for NC rotary table Renishaw OMP60 probe Machine weight approx.: 7,000 kg Includes Babatz screw compressor Accessories: Various SK40 toolholders Iaelhccewzyxpsqqsw The machine was operated in single-shift operation.

Condition: good (used), Year of construction: 2007, operating hours: 23,500 h, Functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, Control: SIEMENS 810D Clamping surface of the work table: 1120 x 540 mm Max. table load: 700 kg Max. spindle speed: 8000 rpm Iajlhswzwznsccqqjw Spindle motor power: 13 kW Tool magazine capacity: 24 pcs. Clamping system: SK 40 with pull stud DIN 69872 - Total machine weight: 5900 kg - Approximate machine dimensions (L x W x H): 4.3 x 2.2 x 2.5 m - Chip conveyor Recently, the following parts were replaced on the machine: - Timing belt 02/2025 - Deublin rotary union 02/2025 - Solenoid valve for high-pressure pump 02/2025 - Filter element with pressure spring 02/2025 - Y-axis cover seal 05/2024 Known defects: - Backlash in X-axis of 0.05 mm - Tool measurement system defective - One gripper in the tool changer defective

Condition: used, Year of construction: 2021, Serial no. 1804617, Datron next control, 23" touch display, travel X / Y / Z 1,020 x 830 x 245 mm, X/Y/Z sensor, HF spindle, max. spindle speed 60,000 rpm, tool holder HSK-E 25, 5-position magazine, 2 vacuum clamping stations, cooling unit, enclosure, steel cabinet 1,000 x 400 x 1,900 mm. Ielowzun Eehccqqoaw +++ Attention: This item is part of an online auction! +++

Condition: used, Year of construction: 2007, x-travel 1020 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 max. turning speeds 12.000 min/-1 Islhccewzmwfsqqsaw table surface area 1.250 x 600 mm max. table load 800 kg tool taper HSK-A 63 number of tool places 32 Pos. Number of working hours ca. 46.200 h spindle hours ca. 12.100 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2008, Functionality: unexamined, travel distance X-axis: 1,000 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: TNC 530, number of spindles: 1, number of slots in tool magazine: 20, tool mount: 40 mm, Equipment: chip conveyor, documentation/manual, Travel: X 1,000 Y 560 Z 500 mm SK 40 20 tools in the tool changer Spindle is defective Without loading magazine Iaslhewzmchjccqqjw

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, Wagner WMC 1100 Year of manufacture: 2012 Iaslhccqewzbicjqsw Renishaw probe system – With probe, laser, etc. (see picture) Control: SIEMENS Sinumerik 828D ICS (internal coolant supply) Spindle speed range: 8,000 rpm Tool holder: SK 40 X-axis travel: 1,100 mm X-axis feed force: 20,000 mm/min X-axis rapid traverse: 20 m/min Y-axis travel: 650 mm Y-axis feed force: 20,000 mm/min Y-axis rapid traverse: 20 m/min Z-axis travel: 600 mm Z-axis feed force: 15,000 mm/min Z-axis rapid traverse: 24 m/min Turret Number of tool positions: 24

Condition: like new (used), Year of construction: 2009, operating hours: 3,878 h, Functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller model: Heidenhain iTNC530, workpiece weight (max.): 1,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 3,878 h, distance table to spindle center: 630 mm, distance table center to spindle nose: 120 mm, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 20, tool length: 250 mm, tool diameter: 100 mm, tool weight: 6 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This DMG DMC 1035 V has only 3875 spindle hours and is therefore still in excellent condition!!! The machine is set up in our showroom and can be viewed operationally by appointment. Ieljwza T Hshccqqsaw

Condition: excellent (used), Year of construction: 2007, operating hours: 10,000 h, Functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 300,000 m/min, table length: 1,200 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, INTERNAL REF.: 20 BARS 12,000 RPM HEIDENHAIN 530 NEW TELESCOPIC COVERS Iaolewzaa Hehccqqow NEW SPARE TELESCOPIC COVERS INCLUDED YEAR: 2007 10,000 HOURS OF USE TAPER: BT40

Condition: used, Year of construction: 2004, Leadwell Vertical Machining Centre Model V-30. S/No. L2TJD0216 (2004) with Fanuc Series Oi-MB Control, 24 Station ATC, Table Size 890mm x 400mm, X Travel 760mm, Y Travel 410mm, Z Travel 410mm, BT 40 Tooling Iajlhewy U Dqsccqqsw Location: This lot is located in Birmingham, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 1064590, SPECIFICATION Travel X axis stroke 1270mm Y axis stroke 508mm Z axis stroke 635mm Distance spindle nose to table 102-737mm Table Width 457mm Length 1321mm Max. Weight on table 1588kg T Slots : width 16mm : pitch 80mm   SPECIFICATION Cont’d Spindle Taper size No.40 Speed 0-7500rpm Iajlhcjwy Uy Eocqqsw Bearings Bearing lubrication Air/oil injection Cooling Liquid cooled Motor Spindle motor, max. rating 14.9kW Feedrate Rapid X, Y & Z axis 18m/min Max. Cutting feedrate 12.7m/min Toolchanger Capacity 20 tools Type BT40 General Approximate machine weight 6033kg Air supply (min) 113lpm, 6.9 bar MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control system Programmable coolant nozzle Automatic lubrication system Enclosed guarding Swarf auger Lighting

Condition: excellent (used), Year of construction: 2019, operating hours: 1,330 h, Functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 608 mm, travel distance Z-axis: 608 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 1,330 h, coolant supply: 20 bar, We offer in almost new condition Hurco VMX42i with only 1330 spindle hours from 2019: X-Axis travel: 1067mm Y-Axis travel: 610 mm Ielhcjwy H Afjcqqeaw Z-Axis travel: 610 mm 12.000 RPM spindle with 239Nm torque Machine has following options included: Internal coolant 20 bar Touch probe Renishaw OMP40 Tool probe wireless Renishaw OTS Software options: DXF Tool + Part probing NC Conversational merge Ultimotion Tool change optimization

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 609 mm, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 4,100 h, coolant supply: 20 bar, We offer in very good condition Hurco VMX30i with 4th axis. We checked machine and geometry and spindle is within new tolerance protocol. Machine is from 2018 and has following options with around 4100 spindle hours and mostly machine Aluminium: Iaolhccqswy Hz Ieqew 40 Tool ATC Internal coolant 20 bar Air true spindle 4th Axis Kitagawa GT200 with tail spindle

Condition: good (used), Year of construction: 2019, 3-axis machining center POS Posmil E 1600, no. 20190405, year of manufacture 2019, HEIDENHAIN control, 40-position tool changer, weight approx. 15,000 kg, with cooling system, filtration unit, chip conveyor, including tool holders and 2 POSFIX machine vices. Ijlhjwyxpdsccqqsaw

Condition: good (used), Year of construction: 2013, 3-axis machining center POS Posmil C 1050, no. 20131203, year 2013, HEIDENHAIN control, 30-position tool changer, weight approx. 7,800 kg, with cooling, filtration system, chip conveyor Islhccewyxn Hoqqeaw

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, Equipment: chip conveyor, MTRENT Machining Center V85 Control: Heidenhain TNC including control option "Rapido High Speed VMC" Good, well-maintained condition Travel (X-axis): 850 mm Travel (Y-axis): 520 mm Travel (Z-axis): 610 mm Rapid traverse (X-axis): 32 m/min Rapid traverse (Y-axis): 32 m/min Rapid traverse (Z-axis): 32 m/min Feed rate (X-axis): 12 m/min Feed rate (Y-axis): 12 m/min Feed rate (Z-axis): 12 m/min CNC Control Manufacturer: HEIDENHAIN CNC Control Model: TNC Overall height: 3,000 mm Overall length: 3,100 mm Overall width: 2,600 mm Table width: 520 mm Table length: 1,000 mm Table load capacity: 800 kg Total weight: 7,800 kg Max. spindle speed: 12,000 rpm Spindle operating hours: 8,300 h Distance from table center to spindle nose: 760 mm Number of tool magazine stations: 24 Tool holder: BT40 mm Tool length: 300 mm Tool diameter: 76 mm Tool weight: 7 kg Iaelewyxdzohccqqow Description: - Control powered on: 25,400 hours - Machine powered on: hours - Program runtime: 8,287 hours

Condition: used, Year of construction: 2006, operating hours: 40,501 h, Functionality: fully functional, machine/vehicle number: AB0730, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, feed length X-axis: 560 mm, feed length Y-axis: 410 mm, feed length Z-axis: 410 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 13 kVA, torque: 82 Nm, controller manufacturer: Siemens, controller model: 810 Power Line Shop Mill, table width: 410 mm, table length: 650 mm, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, Machining Center Spinner VC 560 Year of manufacture: 2006 Control: Siemens 810 Power Line Shop Mill with programming support including color display Tool holder: SK40 Automatic tool changer ATC24 Enclosure with sliding doors, electrically interlocked Work area lighting Iolhccjwymkcsqqeaw Coolant tank Chip conveyor The machine can be inspected and tested on site at any time.

Condition: good (used), Year of construction: 2006, HAAS TM-1C E CNC Vertical Toolroom Milling Machine with HAAS CNC Control System Table Dimension 1,219 x 267mm (3 'T' Slots). Maximum Table Load 227kg. Axis Travel 'X'=762mm, 'Y'=304mm, 'Z'=406mm. Maximum Spindle Speed 4,000rpm (5.6kW Motor). Spindle Taper ISO 40. 24 Station ATC. S/No. 49098 (2006). Iaslhcswyl Rhscqqow With Coolant System, Swarf Tray, Work Lamp & Signal Tower. Approx Overall Dimensions L1,676 × W2,083 × H2,642mm. Weight 1,558kg.

Condition: ready for operation (used), Year of construction: 1999, Immediately available from stock: CNC vertical machining center EMCO Type VMC 600 Year of manufacture 1999 Heidenhain TNC 426 D Electronic handwheel Travel X/Y/Z 1200/410/370 mm Iaslhccjwykxdsqqsw SK 40 24-position tool magazine Speeds up to 6000 rpm 3 vices Weight 4 t Price: €6,500 plus VAT ex stock SK 40

Condition: ready for operation (used), Sigma Zenit 3 machining center Manufacturer: Sigma Type: Zenit 3 Condition: good, ready for operation Power-on hours: 8600h Spindle hours: 1800h Spindle speed: 12,000 Spindle taper: SK40 X-travel: 1000mm Y-travel: 500mm Z-travel: 550mm Iaelhjwya Emoccqqow Tool stations: 50 Chip conveyor Oil mist extraction Through spindle coolant (IKZ) With 4th axis Nikken

Condition: ready for operation (used), Year of construction: 2023, Main Drive Spindle speed range 16000 Number of axis 4 Movement X-Axis Movement 1000 mm Y-Axis Movement 500 mm Z-Axis Movement 480 mm Additional Equipment Coolant: Through-spindle, 15 bar, Coolant tank 150 L Lubrication: Automatic grease lubrication (X/Y/Z) Hydraulic Workpiece Clamping: Pressure: 80–210 bar (mechanically adjustable) Pump: 210 bar, 100% ED duty Tank: 27 L Iaslhswx S Dfsccqqsw Emulsion Mist Extraction Unit: Suction Capacity: 700 m³/h Stages: 5-stage filter with V2A pre-filter Includes: PVC hose (2m, Ø200 mm), Flange connection Ø200 mm This 4-axis Brother Speedio W1000Xd1 was manufactured in 2023. It features a travel range of X-axis: 1000 mm, Y-axis: 500 mm, Z-axis: 480 mm, and a tool magazine with 21 tools. The spindle operates at speeds up to 16,000 rpm. It supports materials like aluminum and steel, and includes a high-pressure coolant system and chip disposal. Consider the opportunity to buy this Brother Speedio W1000Xd1 vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand SIEMENS Model Sinumerik 828D Main Drive Spindle speed range 10000 rpm Spindle motor power 22.5 kW Iajlhccjwx S Ausqqow Number of axis 3 Movement X-Axis Movement 1000 mm Y-Axis Movement 610 mm Z-Axis Movement 600 mm Tools Max weight 8 kg Type of tool holder SK 40 DIN 69871 Additional Equipment Pump pressure: 30 bar Cartridge filter to protect the spindle rotary feedthrough Fully enclosed with large doors and maintenance access Prepared for oil mist extraction (Ø 200 mm) Flushing nozzles on both sides Screw/hinge belt conveyor Chip bucket included Ejector on the left, mounted on the front This 3-axis Feeler NBP 1000A vertical machining center was manufactured in 2016. It features a robust structure with Meehanite fine-lamella cast iron and heat-treated guideways for superior machining performance. The spindle operates at 10,000 rpm, supported by angular contact ball bearings and a temperature-controlled cooling unit. It includes a 30-station tool magazine with a double-arm changer and a Siemens Sinumerik 828D control system. Consider the opportunity to buy this Feeler NBP 1000A vertical machining center. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2012, operating hours: 600 h, This 3-axis machining centre is in very good condition. It was only used for research, development and prototyping and was never used for actual production or hard metal machining, only aluminium and plastic. Immediately available for delivery. 380V power connection - 1 MB memory expansion - 15" color LCD display and USB interface - Rigid tapping - Memory access is locked via a key switch on the control panel - Screw chip conveyor - Programmable coolant nozzle - Automatic air blow gun - Wireless WIPS measuring system for tool and workpiece measurement, including hardware - High-speed machining with a "Look-ahead" function - Visual Quick Code programming Sale at an additional cost (to be discussed): -Renishaw measuring probe -table clamps and work piece clamps -tool holders. Iaslhjwx Rv Hjccqqow X-axis 1016 mm Y-axis 508 mm Z-axis 635 mm Max spindle speed 10000 rpm Table work area (LxW) 1219 x 457 mm Max. weight on table (evenly distributed): 1588 kg Rapid traverses on X/Y/Z 25.4 m/min Tool changer capacity 20 positions Max. tool diameter 89 mm Max. tool weight 5.4 kg Spindle taper SK40 Chip conveyor yes Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: good (used), Year of construction: 2003, X 1200 mm Y 900 mm Z 500 mm 24.000 rpm Tool holder :HSK 63 Parts shown by hand not come. Iolhcswx N R Ajcqqeaw