Oltmanns Innenausbau Gmbh

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 220.242, cutting length (max.): 4,300 mm, saw blade diameter: 350 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting Data Nominal cutting length: 4,300 mm Maximum saw blade diameter (S): 350 mm Scoring blade diameter (V): 300 mm Maximum saw blade projection above table (U): 95 mm Stack Height and Panel Thickness Maximum stack height (P): 80 mm Minimum panel thickness (P): 3 mm Strip Aligner Minimum aligning force: 300 N Maximum aligning force: 990 N Dksdpox Sqpmefx Adajg Additional Specifications Maximum clamp opening (K): 90 mm Working height: 970 mm Overall height: 2,020 mm Machine Accuracy Positioning accuracy: ± 0.1 mm (measured at feed-in) Cutting straightness: ± 0.1 mm over 3 m cutting length Electrical Power and Speeds Main saw motor power: 15 kW Saw carriage forward speed: 5 – 120 m/min Saw carriage return speed: 120 m/min Feed-in forward speed: up to 80 m/min (Europe 25 m/min EN 1870-13) Feed-in return speed: up to 80 m/min EQUIPMENT Strip aligner Label printer Optimization software HPO/F N5

Condition: excellent (used), Year of construction: 2008, Machine Data Holzma HPP 230 43/43 Cutting length: 4300 mm Cutting width (program fence travel): 4300 mm Roller rail element: 10 lanes, 1 piece Roller rail (element, 2 lanes): 5 pieces Clamping grippers: 6 pieces, first 3 are 2-finger; others are 1-finger air cushion tables: 4 units, 1800 x 650 mm Central blower: 1 unit Technical Data: Saw blade projection: 75 mm Saw carriage feed: forward 1–120 m/min, reverse constant at 120 m/min Program fence speed: forward and reverse 80 m/min (EU limited to 25 m/min forward) Automatic cutting height control; pressure beam height control Angle alignment device, min. pressure width 0 mm; max. pressure width equals full cutting length Main saw motor: 7.5 kW with pneumatic saw stroke Scoring saw motor: 1.1 kW Djdpfxex Sp Sae Adaskg Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection value: 13 kW Power Control CADmatic 4 – Practive control system Optimization software SchnittProfit Practive for Office Labeling package including label printer

Condition: excellent (used), Year of construction: 2007, Machine Data: Holzma HPP 380/43/43 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rails (2-track element): 9 pcs Clamps: 7 pcs, first 3 clamps: 2-finger type Air cushion table width: 650 mm / 1 x 800 mm (4 pcs), each 2810 mm length Central blower: 1 unit, high output version POWER-CONCEPT TYPE PROFILINE HPP/L 380 – 1 ‘Power-Concept’ clamp (3-finger type) – 3 skew-lift clamps (2-finger type) – 1 skew-lift clamp (1-finger type) – 1st air cushion table, 800 mm wide – Speed package: saw carriage feed rate 1 – 150 m/min Dedpfox Sd Suox Adajkg Technical Data: Saw blade protrusion: 95 mm Saw carriage feed rate: forward 1-130 m/min, reverse fixed at 130 m/min Automatic cutting height adjustment Angle alignment device, min. pressure width: 0 mm, max. pressure width: full cutting length Main saw motor: 21 kW, frequency-controlled Scoring saw motor, type VVSH vertical upstroke: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating with main saw motor 18 kW: 28 kW Power Control CADmatic 4.0 control with 17" flat display Labelling with part graphics / label program / label printer PICA 104 Grooving program

Condition: used, Year of construction: 2004, machine/vehicle number: 0-240-10-1426, Capacity: 4300 mm x 4300 mm. Saw blade projection: 125 mm. Main saw motor 13.5 kW / Scoring motor 2.2 kW Saw carriage feed: 1-150 m/min, 150 m/min in return Djdpsx Ryy Eefx Adajkg Program fence feed: 90 m/min (limited after 25 m/min) 7 clamping grippers, spacings: 75/275/475/1075/1825/2625/3425 mm. Control: CADmatic 4 – Professional Hardware with Windows XP (US), TFT flat screen Software with graphical display of cutting plan and error diagnostics

Condition: excellent (used), Year of construction: 2011, HOLZMA PROFILINE HPP 380 Cutting Data Cutting length: 4,300 mm Cutting width (program pusher travel): 4,250 mm Saw blade projection: 95 mm Combi and Clamping Jaw System Combi profile rail element, 2-track: 9 pieces Clamping jaws: 7 pieces Spacing: 75/275/475/1,050/1,850/2,650/3,450 mm Manual trimming stops on clamping jaws: 4 pieces (positions 75/475/1,050/2,650 mm) Air Cushion Tables and Extraction Air cushion table with roller element 2,160 x 650 mm: 4 pieces Central blower: 1 piece Air cushion table nozzle manifold: 70 x 70 mm Dodpfsx Nf E Rsx Adaekg Feed and Program Pusher Saw carriage feed forward: 1–130 m/min Saw carriage feed backward: constant 130 m/min Program pusher speed forward: 80 m/min Program pusher speed backward: 80 m/min

Condition: excellent (used), Year of construction: 2011, HOLZMA PROFILINE HPL 380 Cutting and Lift Table Data Cutting length: 4,300 mm Lift cut size: 4,300 mm x 2,200 mm Panel size for lift table feed, max.: 4,300 mm x 2,200 mm Panel size for lift table feed, min.: 1,200 mm x 400 mm Stack Heights Stack height of lift table, floor-level installation, max.: 560 mm Stack height of lift table, pit installation, max.: 780 mm Lift table load capacity, max.: 4 t Roller Rails Roller rail element, 10-track: 1 pc Roller rail element, 2-track: 6 pcs Clamps Spacing: 75/275/475/1,075/1,825/2,625/3,425 mm Extraction and Air Cushion Tables Extraction device position: 2,375 mm Air cushion table with rollers, 2,160 x 800 mm: 1 pc Air cushion table with rollers, 2,160 x 650 mm: 3 pcs Dsdpfx Asx Nf Eqedaokg Central blower: 1 pc Air cushion table nozzle pipe: 70 x 70 mm

Condition: used, Year of construction: 2008, Type EBT 120 Panel saw 4400x2200 Workpiece length min-max mm 4400 Workpiece width min-max mm 2200 Saw blade projection 122 mm Saw carriage feed 1-150 Program pusher feed min-max m/min 100 Saw blade diameter mm 430 Dsdex I Sp Tjpfx Adaekg Main motor kW 15 Stepless feed Scoring unit 2.2 kW Workpiece length min-max mm 4400 Workpiece width min-max mm 2200 Stepless feed

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Horizontal panel saw HOMAG HPP300/43/43 Profi Vacuum loading excluded Cutting width: 4300 mm Dsdpex I Aycofx Adaskg Cutting length: 4300 mm Max. projection of main saw blade: 125 mm 8 clamping grippers

Condition: excellent (used), Year of construction: 2006, Machine available March 2026 Year of manufacture: 2006 Cutting length: 4,400 mm Cutting width: 4,400 mm Dksdpfx Aox Iv Dhjdaeg 6 clamping claws (first 3 are two-finger type) 4 air cushion tables (2,100 x 600 mm) Air cushion blower with integrated frequency control (approx. 70% performance increase) Cutout & stress-relief cut program Labeling program Label printer type PICA 104 CAD layout and optimization software: CADMATIC 3.0 Automatic, stepless cutting height limitation Automatic cutting length limitation Motorized adjustment of scoring saw from operating panel Steplessly adjustable feed speed from operating panel Saw blade projection: 72 mm Saw carriage feed: 5 - 80 m/min Program pusher: 60 m/min Full-length angle pressure device Main saw motor: 7.5 kW (10 HP) Scoring saw motor: 1.1 kW (1.5 HP) Main saw blade: D = 350 x 4.4 x 75 mm Scoring saw blade: D = 200 x 4.4 - 5.4 x 45 mm

Condition: not inspected (used), Year of construction: 1993, cutting length (max.): 4,260 mm, cutting height with scoring (max.): 105 mm, saw blade diameter: 400 mm, cutting width (max.): 4,300 mm, power: 11 kW (14.96 HP), Equipment: scorer, Machine including Laweco conveyor lines with lifting device, load capacity 5,000 kg, platform size 4,100x2,100 mm. The machine comes from a company liquidation. Dksdpfjx Iuzxjx Adaog

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, cutting length (max.): 4,300 mm, cutting width (max.): 4,250 mm, Holz-Her pressure beam saw ZENTREX 6215 Power, with storage connection Cutting length: 4300 mm Cutting width: 4250 mm Saw blade projection: 115 mm Dkedpfxox Id U Ie Adaog Main motor: 15 kW, scoring unit: 2.2 kW Mobile support tables Clean Protection & Dust Control extraction package Laser indicator – strip width detection Intelligent workpiece clamps Switchable clamp pressure Cutting gap closure system Handheld control device Label printer Software and more...

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 241.125, Horizontal Beamsaw of the manufacturer Schelling, designed for cutting wood-based material HPO – cutting optimization program Saw blade projection: max. 95 mm Djdpfex Ebzdex Adaskg Saw carriage feed up to 120 m/min Cutting lengths: Model FH 4 430 - 4.300 mm Can be inspected in working condition until beginning 2026. (dismantling planned) Maximum Saw blade Diameter - 350 mm Projection - 95 mm Clamp opening 90 mm Power Saw motor - 15 kW Scorer Diameter 300 mm Feed rate forward up to 80 m/min reverse 80 m/min Saw feed rate forward up to 120 m/min reverse 120 m/min

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Dkedpfxjx Aqdcj Adajg Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: good (used), Year of construction: 1983, functionality: fully functional, saw blade diameter: 300 mm, space requirement length: 5,200 mm, space requirement height: 2,700 mm, total width: 1,200 mm, input current: 9 A, power: 5.8 kW (7.89 HP), Striebig Vertical Panel Saw Manufacturer: Striebig AG (Switzerland) Model: 5220 A Year of manufacture: 1983 Machine type: Vertical panel saw / vertical saw Version: Manual Technical Data Saw Unit Speed: 4,750 rpm Motor & Electrical Motor power: approx. 5.80 kW Connection: 400 V / 50 Hz / three-phase Dimensions & Weight Machine footprint (W x H): approx. 520 × 270 cm (= 5,200 × 2,700 mm) Weight: approx. 750–850 kg Dodpox Af Amofx Adaokg Additional Features Robust industrial design Suitable for chipboard, MDF, OSB, laminated timber, coated panels Proven Striebig quality

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, cutting length (max.): 4,300 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, plate height: 60 mm, Placing a bid obligates the buyer to collect the equipment by calendar week 02 in 2026. Forklifts and transport aids can be provided by the seller. Up for auction is a combination consisting of two Holzma saws, connected to a Bargstedt storage system. TECHNICAL DETAILS HOLZMA PROFILINE HPL 380 Cutting and Lift Table Data Cutting length: 4,300 mm Lift table cutting size: 4,300 mm x 2,200 mm Maximum panel size for lift table loading: 4,300 mm x 2,200 mm Minimum panel size for lift table loading: 1,200 mm x 400 mm Stack Heights Stack height for lift table, floor installation max.: 560 mm Stack height for lift table, pit installation max.: 780 mm Lift table maximum load capacity: 4 t Roller Rails Roller rail element, 10 tracks: 1 piece Roller rail element, 2 tracks: 6 pieces Clamping Jaws Pitch: 75/275/475/1,075/1,825/2,625/3,425 mm Extraction and Air Cushion Tables Push-off device position: 2,375 mm Air cushion table with rollers 2,160 x 800 mm: 1 piece Air cushion table with rollers 2,160 x 650 mm: 3 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm HOLZMA PROFILINE HPP 380 Cutting Data Cutting length: 4,300 mm Cutting width (programmable pusher travel): 4,250 mm Saw blade projection: 95 mm Combi and Clamping System Combi profile rail element, 2 tracks: 9 pieces Clamping jaws: 7 pieces Pitch: 75/275/475/1,050/1,850/2,650/3,450 mm Manual trimming stops on clamping jaws: 4 pieces (positions 75/475/1,050/2,650 mm) Air Cushion Tables and Extraction Air cushion table with roller element 2,160 x 650 mm: 4 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm Feed and Programmable Pusher Saw carriage feed forward: 1–130 m/min Saw carriage feed reverse: constant 130 m/min Programmable pusher speed forward: 80 m/min Programmable pusher speed reverse: 80 m/min BARGSTEDT PROFILINE TLF 420 Panel thickness: 3–60 mm Maximum panel size: 4,300 mm x 2,200 mm Maximum traverse length: 5,200 mm Measuring and Correction System Length measurement: integrated Width measurement: integrated Automatic rotation correction: available Note: Further technical details can be found in the attached order confirmations. Dedpfoxy Ng Rox Adaokg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,200 h, functionality: fully functional, Panel dividing saw Holzma HPP 380 Profiline with automatic labeller. Dkedpfxjxytlks Adaeg

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Panel saw Giben Prismatic 2 SPT H.100 with rear loading Year of production: 2003 Dkodpfx Asxyq I Nodaog Technical condition: very good Technical details: 4500 mm wide rear loading panel saws with 7 panel feed clamps, side lay-down, 4 air cushion tables of 1300x500 mm and one of 2000x500 mm. Cutting height 100 mm

Condition: used, Year of construction: 2005, functionality: fully functional, Manufacturer: HOLZMA Model: OPT HPP 350/43/43/X Machine type: Beamsaw Year of manufacture: 2008 Operating status: still connected Cutting length 4.300 mm Width of lifting table 2.200 mm Dkedpfx Ajxwwfvedajg Number of grippers 8 Feedrate max 150 m/min Saw blade projection 80 mm Saw blade diameter max 350 mm Scoring saw Yes Labelling manually Lift table loading from behind Stop side Right side HOLZMA | HOMAG Machine table with air nozzles throughout Control HOLZMA CADMATIC 4.1 Declaration of CE-conformity Conformity marking CE mark Space requirement Length 8,2 m Space requirement Width 6,5 m

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 00103, feed length X-axis: 4,800 mm, feed length Y-axis: 4,800 mm, feed length Z-axis: 100 mm, cutting length (max.): 100 mm, cutting height with scoring (max.): 90 mm, saw blade diameter: 400 mm, cutting height (max.): 110 mm, total length: 7,500 mm, total height: 1,700 mm, total width: 6,600 mm, overall weight: 7,700 kg, input voltage: 380 V, compressed air connection: 7 bar, Panel saw with a cutting length of 4500 mm, equipped with a rear table for panel loading. The machine is operational and will be disassembled due to installation of a new machine. Dkedpfx Adexwqlpoajg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, feed length X-axis: 4,300 mm, feed length Y-axis: 4,300 mm, cutting length (max.): 4,300 mm, cutting height with scoring (max.): 4,300 mm, saw blade diameter: 380 mm, HPP 380/43/43, fully automatec loading with TBP 200/31/22/ Main motor 18.5 kW Machine works perffectly, possible test run Holzma Profi HPP 380 Cutting length: 4,300 mm Cutting width (program-controlled pusher travel): 4,250 mm Air cushion table: 2,160 x 650 mm, 3 pcs. + 1* 2,810 mm length Djdpfxjxvz T Ie Adaokg Central blower: 1 unit with increased blower performance 2 additional alignment devices Technical Data: Saw blade projection: 95 mm Saw carriage feed: forwards 1–130 m/min, backwards constant 130 m/min Main saw motor: 18 kW Scoring saw motor: 2.2 kW, VVSH aggregate, program-controlled, vertically rising Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating for main saw motor 18 kW: 24 kW Power Control CADmatic 4.0 control with 17-inch flat display Labeling with part graphics / label program / label printer PICA 104

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Panel saw Holzma HPP 22 Year of manufacture: 1997 Technical condition: good, machine fully operational Technical data: - Maximum panel size: 4200 x 200 mm - Saw blade projection: 140 mm - Cutting length: 4300 mm - Installed power: 26 kW Dedpfxjxvybqo Adaekg

Condition: used, Numerical Control OSI Working dimensions mm 4300 x 2200 Automatic rear load with lifting table (mm) 4300 x 2200 Max blade protrusion (mm) 125 System for lifting and rotating the panels inside the machine Device for cutting thin panels (4 mm approx ) N. 10 pliers on the upper main pusher carriage N. 4 pliers mounted on the lower independent pusher carriage Twin Pusher Double lateral aligner Scoring group (max blade diameter / power) 180 / Kw 2,2 Main blade group (max blade diameter / power) 430 / Kw 15 Adjustable speed of the blade carriage (m / min) 1 - 150 N. 4 front benches for panel discharge air veil Dsdoxt Sgtepfx Adaekg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 220.242, cutting length (max.): 4,300 mm, saw blade diameter: 350 mm, cutting height (max.): 90 mm, cutting depth: 3,300 mm, TECHNICAL DETAILS Cutting Data Nominal cutting length: 4,300 mm Cutting depth (material pusher positioning): 3,300 mm Cutting height: 90 mm Dsdpfxsxtfhwe Adaskg Maximum saw blade diameter (S): 350 mm Scoring saw blade diameter (V): 300 mm Maximum saw blade projection above table (U): 95 mm Stack Height and Panel Thickness Maximum stack height (P): 80 mm Minimum panel thickness (P): 3 mm Strip Aligner Minimum aligning force: 300 N Maximum aligning force: 990 N Other Specifications Maximum clamp opening (K): 90 mm Working height: 970 mm Machine height: 2,020 mm Machine Accuracy Positioning accuracy: ± 0.1 mm (measured at infeed) Cutting straightness: ± 0.1 mm over 3 m cutting length Electrical Performance and Speeds Main saw motor power: 15 kW Forward saw unit speed: 5 – 120 m/min Return saw unit speed: 120 m/min Forward feed speed: up to 80 m/min (Europe 25 m/min EN 1870-13) Reverse feed speed: up to 80 m/min EQUIPMENT Strip aligner Label printer Optimization software HPO/F N5

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted on the suction frame in the separation area, checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Dedpfx Ajxranpjdajkg Roller conveyor for stacking and unstacking: 4,200 mm Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, cutting length (max.): 4,300 mm, cutting width (max.): 4,250 mm, controller model: Power Control CADmatic 4.0, Set consisting of Holzma panel dividing saw and Bargstedt area storage system! Holzma HPP 380/43/43/R TECHNICAL DETAILS Cutting length: 4,300 mm Cutting width: 4,250 mm Saw blade projection: 95 mm Main saw motor: 18 kW Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz MACHINE DETAILS Control: Power Control CADmatic 4.0 – control unit with 17-inch flat display Operating voltage: 400 V (+10%/-5%) / 50 Hz Total connected load: 29 kW EQUIPMENT Grooving program Cut-out and tension relief program Labeling / labeling program / label printer PICA 108 Data interface for storage systems Cutting optimization software: Schnitt-Profit Professional Bargstedt Optimat TLF210/10/05 TECHNICAL DETAILS Dkjdpfjxpu Rgsx Adasg Carriage length: 13.45 m Span: approx. 12.5 m Upper edge of stack in storage: max. 1,700 mm Max. workpiece size: 4,200 x 2,070 mm EQUIPMENT Rotation drive 1 loading station and 1 unloading station