Wzw werkzeugwelten gmbh

Condition: used, Year of construction: 2019, machine/vehicle number: FA76, Used ATLANTA srink wrapping machine - Year 2019Technical Specifications & Performance DataUsed Atlanta type shrink wrapper, manufactured in 2019 and supplied as two units. The equipment is configured for secondary industrial packaging with a current 3x2 pack layout, providing compact film-wrapped bundles for efficient handling, transport and distribution.Quantity: 2 unitsYear of manufacture: 2019Current pack configuration: 3x2Capacity: 40-45 packs/min, ( 2.400 - 2.700 Packs/hours).Installed power: 5.9 kWElectrical supply: 400 V, 50 HzOperating air pressure: 6 barAdvanced Automation & Control SystemsThis shrink wrapper is designed for automated bundle formation and film wrapping within an industrial packaging environment. Its dry-run capability supports testing, setup and verification procedures without product flow, helping operators check the packaging cycle before production operation.The machine uses a 400 V, 50 Hz electrical supply and requires compressed air at 6 bar. These utility requirements should be coordinated with the available site services during installation and recommissioning.Production Line Integration CapabilitiesThe Atlanta type shrink wrapper can be positioned downstream of bottling, labeling or other primary-packaging equipment to create stable multipacks. With its 3x2 layout, it is suited to packaging-line applications where grouped containers require film protection and a practical handling format.In a used bottling line or second hand industrial packaging installation, shrink wrapping equipment typically interfaces with infeed and discharge conveyors. It can support beverage production and other containerized products where bundled packs are required before palletizing, warehousing or distribution.Machine Condition & Maintenance HistoryBoth machines are used and were operational until dismantling. They are reported to be in perfect working order, with no spare-parts replacement required. The equipment was dismantled during the current year and is suitable for professional installation, commissioning and integration into a production line.Operational Performance & VersatilityWith a stated output of 40-45 packs per minute, this shrink wrapper is designed for consistent secondary packaging throughput. The 3x2 pack arrangement provides a defined bundle format for film-wrapped products, supporting orderly downstream handling in industrial packaging operations.Dry-run operation is available, allowing functional checks of the packaging sequence. This feature is useful during installation, line setup and routine operational verification.Installation Requirements & Site PreparationInstallation requires a 400 V, 50 Hz electrical connection, 5.9 kW installed power and compressed air at 6 bar. As the two units have been dismantled, site preparation should include suitable floor space, conveyor alignment, electrical connection and pneumatic supply routing for reliable integration with upstream and downstream packaging machinery.Safety Standards & Compliance CertificationThe shrink wrappers should be installed a... Cedpfo Aia Etsx Aqvori

Condition: used, Year of construction: 2009, machine/vehicle number: FA75, Used ITALDIBIPACK SA 1250 shrink wrapper - Year 2009Technical Specifications & Performance DataThe ITALDIBIPACK SA 1250 is a used shrink wrapper designed for secondary packaging operations in bottling and industrial packaging environments. Manufactured in 2009 and fully refurbished by ITALDIBIPACK in 2020, this machine is intended for wrapping products and grouped packs with shrink film. Its working configuration accommodates film rolls in different sizes, up to 1000 mm width.Manufacturer: ITALDIBIPACKModel: SA 1250Year: 2009Refurbishment: Fully refurbished in 2020 by ITALDIBIPACKMaximum film width: 1000 mmElectrical supply: 400 V, 3Ph + T + NFrequency: 50/60 HzPower: 2 kWWeight: 350 kgAdvanced Automation & Control SystemsThis shrink wrapper is configured for industrial operation with a three-phase electrical supply including earth and neutral connection. The machine is equipped for operation at 50/60 Hz and has an installed power requirement of 2 kW. Its film-routing arrangement incorporates guide and drive rollers to support controlled film handling during the wrapping cycle.The available safety protections contribute to protected operation around the machine's moving packaging components. The operating configuration is suitable for integration into an automated or semi-automated end-of-line packaging area, depending on the connected material-handling equipment and production layout.Production Line Integration CapabilitiesThe SA 1250 can be positioned downstream of filling, capping and labeling equipment to create shrink-film packs for a used bottling line or wider beverage production and industrial packaging process. It can receive products from straight infeed conveyors and can be coordinated with downstream palletizing or further handling systems.Machines of this type are commonly used to create stable, film-wrapped multipacks before pallet handling. The ability to use film rolls of different dimensions up to 1000 mm width provides flexibility when configuring packaging presentations and pack dimensions. Integration should include suitable product conveyors, electrical connection and synchronized upstream and downstream flow management.Machine Condition & Maintenance HistoryThe machine is in production. It was manufactured in 2009 and fully refurbished in 2020 by ITALDIBIPACK. This refurbishment history supports its suitability for continued second hand packaging operations where a maintained shrink wrapping solution is required.Manuals, refurbishment documentation and spare parts are available. These resources can assist maintenance teams with commissioning, routine servicing and ongoing support within a production line.Operational Performance & VersatilityThe ITALDIBIPACK SA 1250 provides a practical shrink wrapping function for grouped products in industrial packaging applications. It is suitable for use as part of secondary packaging operations in beverage production and other product-handling environments where film-wrapped packs are required.Its film handling system is designed a... Cedo Aia Ehspfx Aqvjri

Condition: good (used), functionality: fully functional, Krones steam shrinking line, capable of processing up to 12,000 bottles per hour. Crsdpo Ah Thnofx Aqvsi

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, total length: 2,200 mm, total height: 1,230 mm, total width: 1,400 mm, type of input current: three-phase, product height (max.): 180 mm, product height (min.): 10 mm, product length (min.): 200 mm, product length (max.): 1,000 mm, product width (max.): 630 mm, product width (min.): 200 mm, input voltage: 400 V, compressed air connection: 6 bar, input frequency: 50 Hz, energy consumption: 21 kWh, feed rate X-axis: 26 m/min, workpiece weight (max.): 10 kg, For sale is an AMTEC film packaging system, consisting of a vertical angle sealing machine SPEEDshrink 40XXL PRO and a high-speed POF-XL shrink tunnel. The system was factory-adapted for larger products and product weights up to 10 kg. The enlarged sealing frame and the reinforced conveyor drive enable the packaging of products up to 1,000 mm in length. Technical data and features: -Product dimensions according to special design: Length 200–1,000 mm, Width 200–630 mm, Height 10–180 mm -Sealing frame: 1,200 × 700 mm -Product weight: up to 10 kg -Conveyor speed: up to 26 m/min -Additional frequency converter for speed control of the conveyor belts -Stable four-column guide for the vertical sealing frame -Height and pressure of the sealing frame adjustable -Adjustable perforation module -Compressed air requirement: 6 bar Crsdpfxs Ah Hvlo Aqvoi -Connection power angle sealing machine: approx. 4 kW Shrink tunnel POF-XL High-Speed PRO: -For processing POF shrink film -Double air circulation with adjustable airflow -Tunnel dimensions: approx. 1,700 × 790 × 350 mm (L × W × H) -External dimensions: approx. 2,200 × 1,400 × 1,230 mm (L × W × H) -Electrical connection according to documentation: 380 V, 21 kW The machine is in good, fully functional condition and has been used only sparingly. The machine is ready for operation and can be inspected and demonstrated under power after prior appointment. A trial run is possible after consultation. If you are interested, we look forward to receiving your inquiry.

Condition: used, Pallet Wrapping Machine W&W EFA5 1450 Palettenstretchmaschine - Pallet Wrapping Machine W&W EFA5 1450 Year 1995 - Serial-No. 9503264-943-3144 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Cede Ahzv Uepfx Aqvjri

Condition: used, Banding system for banknotes and cheques ATS US-2000 SIB-BIN3 Banderolieranlage für Banknoten und Schecks - Banding system for banknotes and cheques ATS US-2000 SIB-BIN3 Crsdpfo Ahzv Hex Aqvji Year 2011 - Serial-No. BTA 734/3 V5B16897 Performance - up to 24 bandings per minute Band width - 20, 30, 50 mm Voltage - 230 V, 13 A Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Banderolieranlage für Banknoten und Schecks - Banding system for banknotes and cheques ATS US-2000 SIB-BIN3 Year 2009 - Serial-No. BTA 734 V5A96330 Performance - up to 24 bandings per minute Band width - 20, 30, 50 mm Csdpfx Aqs Ahzv Aovjri Voltage - 230 V, 13 A Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Capacity of up to 90 bottles per minute. 9-meter conveyor infeed (double lane) and 15-meter conveyor outfeed in a U-shape. Crjdpj Ahybxjfx Aqvsi Cosmotec cooling unit for the electrical cabinet. 4 reels (2 x 2) can be used simultaneously on the machine, with an accumulation unit to prevent downtime during reel changes.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, Capacity of up to 45 bottles per minute. Crjdpfx Aqo Ahx Tisvji Single-head heat-shrink sleeve applicator. Includes a 4-meter infeed conveyor belt and a 4-meter outfeed conveyor belt.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 1755741, total length: 4,500 mm, total height: 1,800 mm, total width: 1,900 mm, input voltage: 400 V, energy consumption: 23 kWh, Industrial Film Wrapping Machine LPFK1-218 Manufacturer: Lerum Pac Maskin AB, Sweden Model: LPFK1-218 | Year: approx. 2017 Machine No.: 1755741 Industrial film wrapping machine for automatic packaging of wood products, boards and long profiles. The machine has been used at Superwood A/S and has a total operating time of less than one month. It is being sold due to changes in the production line. Technical data: Crsdpfx Aqe Ahnkzjvei Max. film width: 800 mm Adjustable conveyor speed Digital temperature control 400 V / 50 Hz, 23 kW Siemens SIMATIC HMI and PLC control Frequency inverters, CE marked Dimensions (L × W × H): approx. 4,500 × 1,880 × 1,560 mm Original documentation included, including manual, electrical and pneumatic diagrams, and spare parts lists. The machine is sold in its current condition. Important: The machine will be removed from the production line in week 52, 2026. Collection is possible from week 2, 2027. Price: EUR 35,000 excl. VAT Location: Hampen, Denmark Delivery: EXW, buyer arranges collection and transport.

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: VD 09.16.1408, WITH SHRINK TUNNEL Commission No.: 25.150.71 Equipment / Additional information: Sealing frame dimensions: approx. 800 x 600 mm Cjdpfxj Ahng Ne Aqvjri Packaging capacity: up to 20 cycles/minute (depending on the product and operation) Film roll width: max. 750 mm (suitable for center-folded or flat film; film thickness approx. 12 µm to 80 µm) Clearance height: approx. 100 – 400 mm // Working height: approx. 870 – 970 mm Sealing technology: Impulse sealing system with a Teflon-coated cutting/sealing wire (odorless) Typical applications: Printed materials (books, magazines) Glass products in multipacks General consumer goods and industrial items requiring shrink-film protection

Condition: used, Die Kallfass KC5050/400 Universal ist eine sehr kompakte Winkeleinschweißmaschine mit einem Schrumpftunnel.  The Kallfass KC5050/400 Universal is a very compact L-sealer with an integrated shrink tunnel. Halb-automatische Winkeleinschweißmaschine / Semi-Automatic Foil sealing machine Kallfass KC5040/450 Universal Year 2000 - Serial-No. FR 06.00.094 Cjdpfs Ahkzfox Aqvori Schweißrahmenabmessungen / max. 500 x 400mm Folienrollenbreite / Foil width max. 550mm Tunneldurchlassbreite / Tunnel width max. 520mm Tunneldurchlasshöhe / Tunnel high max. 245mm Fahrbar auf Rollen / Mobile on mobile frame Nach dem Schweißen automatisch der Transport in den Schrumpftunnel  /After sealing - automatic transport into tunnel Sehr guter Zustand - TOP Condition Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Semi-Automatic Foil sealing machine MAF WS2-St500 Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine MAF WS2-St500 Year 1989 - Serial-No. 24 08689 Mobile on mobile frame After sealing - automatic transport into tunnel Crsdpfs Agp D Hjx Aqvei Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), LP MASKIN / Lerum Pack Maskin ab Model: FKK2 Heavy Duty shrink wrapping machine for packing bundled timber products for wood industry. Crodpfx Aqs Af U D Djvji Suitable for use with mechanisation feeding from a bundling unit mechanical handling. (Possible to offer addition mechanisation and bundling automation also if needed.) Connection: 3-phase 63 ampere Power: 32 kW PLC controller Adjustable temperature between 180-245 degrees C Adjustable feeding speed between 15-40 meters/minute Welds the plastic at the ends Dimensions & weight Length: 5300 mm Width: 1500 mm Height: 1850 mm Included tools or accessories Full range of forming shoes and film rollers for all dimensions of timber.

Condition: used, Film Wrapping Machine for pharma single and multipacks Pester PEWO-fold Crsdpfxe Af Ahve Aqvoi Folieneinschlagmaschine für pharmasichere Einzel- und Sammelgebinde - Film Wrapping Machine for pharma single and multipacks Pester PEWO-fold Year 1991 - Serial-No. N-261 Maschinen Abmessungen: 2950 x 1450 x 2100 mm [L x B x H] Ausstattung: K-Stapler Min. Formatbereich: Faltschachtel 30 x 15 x 60 mm [a x b x h] Gebinde 60 x 30 x 60 mm [L x B x H] Max. Formatbereich: Faltschachtel 150 x 80 x 250 mm [a x b x h] Gebinde 250 x 250 x 140 mm [L x B x H] Leistung: bis zu 60 Gebinde/ Min. Steuerung: Schneider Electric PacDrive 3 / Rockwell Automation (Allen-Bradley) Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, We are selling a complete shrink-wrapping system from Reiner Diez Packaging Machines (Neuffen), manufactured in 2015, Made in Germany. The system was used in our facility for packaging tires. It is located in a hall and is fully functional and can be inspected on-site. In February 2025, the entire system underwent a comprehensive maintenance service by the manufacturer, Reiner Diez, for over €14,400. The invoice is available. Scope of supply: Codpfx Aj Afx Ngoqvori Film wrapping and sealing unit with separating sealing bar, belt conveyor, film unwinding at the bottom, two viewing window doors, and protective grating at the inlet Through-feed shrink tunnel Two control panels with emergency stop, compressed air maintenance unit Technical data of the wrapping/sealing unit Type: SB-D 11070 IL-SZ Machine No.: 141019 SZ Year of manufacture: 2015 Connection: 400 V / 3 Ph / 50 Hz Control voltage: 230 V AC / 24 V DC Rated current: 12 A Power consumption: 4 kW Fuse rating: 16 A Technical data of the shrink tunnel Type: HTC 950900 260-SZ Machine No.: 202046 Year of manufacture: 2015 Connection: 400 V / 3 Ph / 50 Hz Control voltage: 230 V AC Rated current: 100 A Power consumption: 59 kW Fuse rating: 100 A In addition, a compressed air connection is required. The sale is made excluding any warranty. Commercial sale; an invoice with VAT can be provided.

Condition: ready for operation (used), machine/vehicle number: B15100778, The DBA-1300A semi-automatic pallet strapping machine is specifically designed for the automatic strapping of heavy pallets. It is characterized by stable performance, energy efficiency, robustness, and durability. Crjdps Afntqjfx Aqvoi It solves the problems associated with the difficult and slow packing of large pallets, which often results in poor quality and other deficiencies. The machine improves the efficiency and effectiveness of bundling goods. After strapping, the pallet can be transported more easily and safely. The machine is widely used in manufacturing, trade, business, and other sectors. Maintenance is simpler than with manual tools, operation is straightforward, and the price is affordable. The machine is of high quality and easy to operate.

Condition: used, functionality: fully functional, The Dibipack 4255 EV from Italdibipack is a small, microprocessor-controlled shrink wrapping machine. Automatic adjustment of the sealing temperature to the operating cycle guarantees stable and consistent seams. The shrinking process, combined with the simultaneous sealing of the film, is completed in a single operation. The product is placed inside the film and then drawn into the shrink chamber. The hood is now manually closed and held in place by an electromagnet. The automatic cycle then begins, during which the film is sealed around the product and shrunk, conforming closely to the product's shape. The shrinking is achieved by heating the air, which is simultaneously circulated by a fan. Once the process is complete, the hood opens automatically, and the finished, packaged product can be removed. For bagging products, the film can be sealed without subsequent shrinking. Up to 8 different work programs can be stored via the control panel. Parameters such as shrink temperature, shrink time, and the sealing time of the sealing strip can be easily and conveniently adjusted on the operating panel. An electronic counter informs you about the product flow. A mobile base, which makes the Dibipack 4255 EV even more flexible, is available as an accessory. The Dibipack 4255 EV can be used to process PVC, PE, PO, LDPE, OPP, CP films, all sealable films, as well as micro-perforated and food-grade films. The machine has undergone a thorough inspection in our in-house workshop and is fully functional. Upon request, a video of the machine can also be sent. You will receive an invoice with VAT shown. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality branded equipment at fair prices. Professional refurbishment / inspection & expert cleaning. Checked & fully functional - or your money back. Flexible options for shipping or self-collection. Competent advice - before and after purchase. Provision of operating instructions, wiring diagrams & spare parts. Inspection according to DGUV V3. Technical data: Max. output per hour: 240-360 pieces Power connection: 230 V - 1 phase Rated power: 3 kW Working table height with base: 920 mm Crede Afdmyepfx Aqvji Sealing frame L x W: 550 x 420 mm Max. product height: 200 mm Machine dimensions, L x W: 1,235 x 750 mm Max. film width: 600 mm Max. film roll diameter: 250 mm Machine weight: 87 kg Condition: used, fully functional Further details: Up to 8 different work programs can be stored. Microprocessor-controlled processes. Energy-saving standby function. Hood opening system with gas spring. Electronic counter. Quick and easy adjustable film unit for different product sizes. Processing of different films. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to change and errors.

Condition: good (used), Year of construction: 1989, It's going well; I also have about 100 kilograms of shrink wrap available. Crodpfx Aqj Ad Uf Revei

Condition: used, Year of construction: 2005, machine/vehicle number: FA68, Used OCME VEGA S602 shrink wrapper 43200 BPHTechnical Specifications & Performance DataThis automatic shrink wrapper is engineered for high-speed industrial packaging in beverage production and food applications. Manufactured by Ocme, the VEGA series is recognized for reliability, precision, and consistent performance on used bottling line setups and second hand packaging machinery installations.Model: VEGA S60/2Maximum speed: 43,200 bottles/hour (up to approximately 120 bundles/min with 3x2 of 1.5L)Current format: 3x2 for 1.5L bottlesContainer materials: PET, Glass, Aluminum cansMaximum container height: 400 mmPackage type: Film onlyNo. of lanes: 2Max film reel diameter: Ø 500 mmNo. of reels: 2 (no automatic reel change)Operator side: RightMachine dimensions: 17000 x 2000 x 2400 mmElectrical supply: 400 V, 3 Ph, 50 HzInstalled power: 36 kWCompressed air pressure: 6 barPLC: SiemensHMI: Siemens SimaticPrinted film equipment: Complete with printed film centering/registrationAdvanced Automation & Control SystemsThe machine integrates Siemens PLC control with a Siemens Simatic HMI for intuitive operation, recipe management, and diagnostics. Automated synchronization across dual lanes ensures stable infeed, collation, and film handling at high speeds. Printed film registration enables precise artwork alignment on every bundle. Electrical specifications of 400 V and 50 Hz support integration into standard industrial packaging environments, while the 36 kW power rating ensures robust thermal and motion performance.Production Line Integration CapabilitiesDesigned for seamless integration into existing bottling equipment and industrial packaging lines, this shrink wrapper can operate inline or as a standalone unit with upstream and downstream conveyors. The 2-lane configuration provides flexible throughput and format changeover potential for PET, glass, and aluminum containers. It is suitable for a wide range of beverage production contexts, enabling efficient secondary packaging across multiple SKUs and bottle sizes, including 1.5L formats.Machine Condition & Maintenance HistoryThe machine is ready for operation, overhauled, and covered by a 6-month warranty. It has been refurbished with compatible spare parts, ensuring dependable performance and minimized commissioning time for second hand installations.Operational Performance & VersatilityOptimized for film-only bundles, the system delivers stable collation and strong, uniform shrink results. With printed film centering, it supports high-quality branding on multipacks. Compatible product categories include water (still and sparkling), soft drinks, beer, wine, milk, oil, and spirits, enhancing multi-product flexibility within a used bottling line or mixed beverage production facility. The dual-lane setup boosts thro... Crodpe Adyzdofx Aqvsi

Condition: used, Year of construction: 2014, operating hours: 180 h, machine/vehicle number: FA54, Used Shrink Wrapper Tetra Pak year 2014 9000 bricks/hour Introduction to the Used Shrink Wrapper Tetra Pak year 2014 9000 bricks/hour This machine is a used shrink wrapper model 32, manufactured by Tetra Pak in 2014. It handles the secondary packaging of aseptic carton containers, which manufacturers commonly use for liquid food products. Currently, operators have stored the unit, and they classify it as fully automatic, featuring a straight-line feed system. Moreover, it has only 180 hours of operation, which ensures minimal wear and high reliability. In terms of productivity, the machine reaches a performance level of 9,000 bricks per hour. Supported package configurations The Shrink Wrapper 32 offers a high degree of flexibility in terms of package configurations. Consequently, it adapts well to a variety of operational setups. It supports multiple layouts, including 3×1, 3×2, 3×3, 4×1, 4×2, 4×3, 5×1, 5×2, and even the Straw configuration for packs with pre-applied straws.As a result, this versatility makes the machine suitable for integration into modern, high-capacity Tetra Pak filling lines. Furthermore, it enables seamless transitions between different packaging formats without compromising efficiency. Compatibility with the 200 ml EDGE format Csdpe Adyxvofx Aqvjri This model works specifically with the Tetra Pak EDGE 200 ml format, which remains a standard choice for juices, dairy, and ready-to-drink products. In addition, the EDGE format requires both precision handling and consistent film application—criteria the Shrink Wrapper 32 fulfills reliably.Therefore, by combining this format with the various supported configurations, operators can address a wide range of packaging needs. Additionally, this compatibility enhances line flexibility and product presentation.As a result, the Used Shrink Wrapper Tetra Pak year 2014 9000 bricks/hour serves as a high-performing option for technical teams aiming to maintain speed and versatility. Operating features and safety systems of the Used Shrink Wrapper Tetra Pak The system opera...

Condition: used, Year of construction: 2013, machine/vehicle number: FA59, Used automatic Tecmi shrink wrapper - 2013Technical Specifications & Performance DataThis automatic shrink wrapper is engineered for high-efficiency industrial packaging of PET bottles on a used bottling line. Manufactured by TECMI, the machine combines reliable mechanics with Siemens automation to deliver consistent bundle quality for beverage production and other industrial packaging applications. With a compact footprint and robust construction, it is well suited for second hand integration into existing packaging machinery layouts.Manufacturer: TECMIModel: EV 750 – 50 – TT 70-45 x3Year: 2013Production speed: 50–100 bundles/minute, (36.000 BPH on 3x2 format) Configured format: PET 380 ml x 6-packContainer types: PETElectrical data: 440 V, 60 HzWeight: 1300 kgOperating mode: AutomaticControl platform: Siemens PLC/HMIAdvanced Automation & Control SystemsThe shrink wrapper is managed by a Siemens PLC with an HMI interface, providing intuitive setup, recipe handling, and diagnostic visibility for operators. Automated film handling, sealing, and shrink processes enable stable performance across the specified speed range. Temperature control and sealing parameters can be fine-tuned to maintain seal integrity and pack appearance, supporting consistent quality under demanding beverage production schedules. Interlocked guarding and safety monitoring are integrated into the control system to protect operators and maintain uptime.Production Line Integration CapabilitiesDesigned for seamless integration into a used bottling line or as a standalone unit, this packaging machine supports infeed from upstream conveyors and discharge toward downstream case handling or palletizing systems. The configured setup is optimized for PET 380 ml bottles arranged in 6-packs with neutral film. The automation platform simplifies line synchronization and facilitates quick adjustments when coordinating with other bottling equipment such as fillers, labeling machines, and palletizers.Machine Condition & Maintenance HistoryThe machine is currently in storage. As a second hand unit, it has higher working hours compared to other available machines noted as having less than one year of use. Despite this, the Siemens-based control and industrial-grade build are designed for longevity, offering dependable performance when properly serviced and commissioned.Operational Performance & VersatilityTargeted at industrial packaging needs in beverage production, the unit runs neutral film and forms stable 6-pack bundles of PET bottles. Its speed envelope of 50–100 bundles per minute provides flexibility for varying line capacities and demand profiles. The machine’s automation and consistent sealing performance support repeatable packaging quality, minimizing rework and optimizing throughput on high-volume lines.Installation Requirements & Site PreparationPlan for adequate floor space based on the EV 750-50 layout and ensure clear access for film loading and maintenance. Electrical service must provide 440 V,... Csdj Adyvnspfx Aqvjri

Condition: used, Year of construction: 2014, machine/vehicle number: FA60, Used ZELGA Shrink wrapper RZE 400 - 2014Technical Specifications & Performance DataThis automatic Shrink Wrapper from ZEGLA is designed for reliable secondary packaging of beverage containers, specifically aluminum cans. The model RZE 400 provides consistent bundle formation with neutral film, ensuring robust presentation and pallet stability for distribution. Built with industrial-grade components and a proven control platform, it is suitable for integration in a used bottling line or as a second hand upgrade to existing beverage production.Manufacturer: ZEGLAModel: RZE 400Year: 2014Machine category: Shrink WrapperContainer compatibility: Aluminum cansOperating type: AutomaticPLC/Control: Allen BradleyFilm type: Neutral filmElectrical supply: 440 V, 60 HzWeight: 1700 kgAdvanced Automation & Control SystemsThe machine is equipped with an Allen Bradley control architecture for dependable automation and straightforward diagnostics. Operators benefit from stable process control, precise temperature management within the shrink tunnel, and consistent infeed/outfeed synchronization for smooth bundle handling. The automatic operating mode reduces manual intervention while supporting repeatable format settings and efficient changeovers.Allen Bradley PLC for reliable control and integrationAutomatic sequence management for infeed, wrapping, and shrink tunnelStable temperature regulation for consistent film shrinkageOperator-friendly controls for setup and routine adjustmentsProduction Line Integration CapabilitiesEngineered for seamless inclusion within industrial packaging and beverage production environments, the ZEGLA RZE 400 can be positioned downstream of can filling and labeling equipment and upstream of palletizing systems. It supports integration with standard conveyor systems and typical accumulation solutions used in modern bottling equipment and packaging machinery.Compatible with upstream can filling and labeling processesDownstream-ready for case handling or palletizingSuitable for standalone use or full production line integrationDesigned for shrink-wrapping bundles with neutral filmMachine Condition & Maintenance HistoryThe unit is currently in storage and has seen less than one year of active operation. Its limited runtime and storage status make it a compelling option for producers seeking a second hand shrink wrapper with low wear. The overall presentation indicates careful handling and readiness for recommissioning in a used bottling line or packaging machinery layout.Operational status: In storageUsage: Less than 1 year in productionOperational Performance & VersatilityPurpose-built for can multipacks, the RZE 400 focuses on stable pack formation and consistent shrink quality with neutral film. This configuration supports beverage producers aiming to improve secondary packaging presentation... Crsdpfx Aqe Adyvhovei

Condition: used, Year of construction: 2011, machine/vehicle number: FA61, Used SMI LSK 35T shrink wrapper 12600 BPHTechnical Specifications & Performance DataThe SMI LSK35T Shrink Wrapper is an automatic packaging machine engineered for high-efficiency secondary packaging in beverage production and industrial packaging environments. Manufactured by SMI, this model delivers robust performance with flexible format handling across PET, glass, and aluminum containers. Suitable for integration into a used bottling line or as a standalone unit, it supports both film-only and tray-plus-film bundles for a wide range of products and container sizes.Manufacturer: SMIModel: LSK35TYear of manufacture: 2011Maximum speed: up to 12,600 units/hour (format-dependent)Current package configuration: 8x1Number of lanes: 8Machine pitch: 545 mmMaximum container height: 340 mmWorking table height: 1250 mmPack types: Film, Tray + FilmReels: 2 reelsMaximum reel diameter: Ø 500 mmContainer materials: PET, Glass, AluminumAdvanced Automation & Control SystemsEngineered for reliable, automatic operation, the LSK35T features native SMI controls for seamless handling and stable performance at speed. Printed film centering ensures accurate registration for high-quality printed shrink film applications, enhancing pack aesthetics and brand consistency.HMI: SMIPLC: SMIElectrical supply: 400 V, 3-phase, 50 HzCompressed air: 6 barOperator side: LeftPrinted film centering: IncludedProduction Line Integration CapabilitiesDesigned for flexible integration, this shrink wrapper interfaces smoothly with upstream and downstream bottling equipment. A well-defined module sequence supports consistent product flow, from separation and tray forming to wrapping and discharge. The layout typically includes a separator unit, tray former, wrapping unit, and outfeed conveyor, facilitating easy connection to conveyors and palletizing systems in a second hand or upgraded used bottling line.Inline operation with standard conveyor interfacesSeparator unit for multi-lane product distributionTray former unit for stable base packs where requiredWrapping unit for film-only or tray-plus-film bundlesSuitable for PET, glass, and can handlingMachine Condition & Maintenance HistoryThis LSK35T is reported as ready for operation, overhauled, and supplied with compatible spare parts. The machine condition supports immediate deployment in beverage production environments aiming to expand packaging capacity or modernize legacy packaging machinery with a reliable second hand solution.Ready for use and operationalOverhauled with compatible spare partsCommercial warranty support referenced (period subject to agreement)... Cjdpfx As Adyvboqvsri

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 65977, input voltage: 400 V, input current: 65 A, input frequency: 50 Hz, Equipment: documentation/manual, SMIPACK XP650 ALX-T – Automatic Shrink Wrapping Machine (2018) For sale: SMIPACK XP650 ALX-T, an industrial automatic shrink wrapping machine manufactured in Italy in 2018. The machine was used for only two years, after which it was taken out of production and placed in storage. It has remained unused and stored for the past six years. Due to its limited operating period, the machine is expected to have relatively low operating hours compared to its age. Main Features - Automatic product grouping and handling - Automatic cardboard tray forming - Automatic shrink film wrapping - Integrated heat shrink tunnel - Production capacity of up to 25 packs per minute - Suitable for packaging bottles, cans, jars, and various other products - Designed for integration into automated industrial packaging lines Machine Information - Manufacturer: SMIPACK, Italy Crsdpfx Ao Adxzijqvei - Model: XP650 ALX-T - Year of manufacture: 2018 - Operating history: Approximately 2 years - Storage period: Approximately 6 years - Current status: Stored, not currently in operation Additional Information The machine is suitable for industrial production environments requiring reliable, automated secondary packaging. With only two years of previous operation, it represents an attractive opportunity to acquire professional industrial packaging equipment at a significantly lower investment compared to a new machine. A technical inspection and functional test are recommended before recommissioning, due to the extended storage period. Further technical details, photographs, and additional information are available upon request.