Alexander Planche

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Kdedpfx Aeya Iaqog Uog Press capacity: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis travel: 620 mm Backgauge R-axis travel: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y-axis rapid traverse: 200 mm/s Y-axis working speed: 1-10 mm/s Y-axis return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC Control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable stop fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop points up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electrical foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for the lower tool, height 160 mm x width 60 mm, with 14 x 23 mm locating slot - TRUMPF tool system, without tooling Dimensions L x W x H: 0 x 2500 x 3400 mm Machine height: 3350 mm (max. height 3400 mm) Weight: 17,000 kg In good condition

Condition: good (used), functionality: fully functional, Year of construction: 2006, Used 4 meter CNC press brake from Bystronic Model: PR 200 Capacity: 4100 x 200 tons Cybelec ModEva12 CNC control Controlled axes: Y1, Y2, X, R, Z1, and Z2 Year of manufacture: 2006 Extra long stroke: 415 mm Hydraulic RFA upper clamping Hydraulic WILA NS lower clamping Hydraulic CNC crowning Kodpfsya Hpdox Ag Ujdg

Condition: good (used), Technical data: Working length: 8050 mm Column distance: 7550 mm Pressing force: 200 t CNC control: CYBELEC DNC 880 S Adjustable backgauge Dimensions (Length x Width x Height): approx. 8650 x 2900 x 3800 mm Weight: approx. 47 tonnes Note: The table extends approximately 3 meters into the floor. Kdsdpeya D A Iofx Ag Uog Accessories: Various tools The seller shall not be liable for typing or data transmission errors. The machine's condition, visually, mechanically, and regarding wear, is consistent with its age; used machines are sold without any form of warranty.

Condition: used, Year of construction: 2007, bending force (max.): 1,100 t, PRESS BRAKE "LVD" MOD. PPEB 110/42 Pressing force: 1,100 kN Pressure: 245 bar Usable length: 4,270 mm Distance between uprights: 3,820 mm Stroke: 200 mm Table/ram distance: 400 mm Throat depth: 400 mm Table width: 120 mm Maximum table load: 2,000 kN/m Working height: 970 mm Approach speed: 130 mm/s Working speed: 12 mm/s Kjdsya Dcuspfx Ag Uedg Return speed: 115 mm/s Motor: 15 kW

Condition: ready for operation (used), Press force: 250 t Kdodjx Tr Ugopfx Ag Uog greatest working length: 4050 mm equipped with CYBELEC DNC 70 PSG control

Condition: used, Press Brake Brand: LVD Capacity: 3000 x 135T Model: PPBL 135/30 Distance between uprights: 2550 mm Throat depth: 200 mm Stroke: 130 mm Working speed: 8 mm/s Number of backgauge axes: 2 Motor power: 8.5 kW Kdsdox Tqt Ujpfx Ag Uog

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller model: DT10, bending force (max.): 175 t, working width: 3,050 mm, distance between stands: 2,600 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, travel distance X-axis: 650 mm, back gauge adjustment: motor-driven, overall weight: 11,250 kg, Equipment: european tool clamping system, Durma AD-R 30175 CNC Hydraulic Press Brake for Sale (2018) For sale: a lightly used Durma AD-R 30175 CNC hydraulic press brake, single owner, manufactured/purchased in 2018 (supplied by Vendo Kft.). Kdsdpfsx Taplex Ag Ujg The machine is in excellent technical condition and has been regularly maintained. Very low usage: over the past 7 years, it has been used on average only 2–3 hours per month. Main Technical Specifications (Durma AD-R 30175): CNC control: DT10 touchscreen controller Pressing force: 175 tons Bending length: 3050 mm Distance between columns: 2600 mm Y-axis rapid speed: 100 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 100 mm/s X-axis speed: 250 mm/s X-axis stroke: 650 mm Back gauge: motorized ball screw type Tool clamping: Euro-type quick clamping system Machine weight: approx. 11,250 kg Price: EUR 42,500 net The machine can be inspected and tested at our facility in Tatabánya, Hungary.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, 6 axes Y1 - Y2 - X - R - Z1 - Z2 Electromechanical follower pair Kdsdpfx Ajx Sru Djg Uog Pneumatic punch and die clamping Pneumatic bending and pressing unit Intermediate pieces H = 200 Angle reader ACTIVE hydraulic crowning

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, controller manufacturer: Cybelec, bending force (max.): 250 t, stroke length: 265 mm, number of axes: 6, type of crowning: CNC-controlled, Equipment: CE marking, emergency stop, safety light barrier, Used Bystronic 250ton x 5metre multi axis hydraulic downstroke cnc pressbrake for sale PR250 x 5100 Make: Bystronic Kodpfxox R Ut Ho Ag Uodg Model: PR 250 Pressure Reference Year / new: 2005 Total axis:6 – 4axis back gauge X R Z1 Z2 Free standing no pit required Capacity / bed size / tonnage: 5metre x 5100mm x 250ton Cnc control: Cybelec Delivery to your factory and installation complete with tuition with your operators can be arranged (mainland UK only) shipping worldwide can be arranged

Condition: ready for operation (used), throat depth: 260 mm, operating speed: 7 mm/s, reverse speed: 73 mm/s, total length: 4,270 mm, total width: 1,750 mm, total height: 2,850 mm, travel distance Z-axis: 190 mm, empty load weight: 12,000 kg, passage width: 2,550 mm, Durma HAP 200 ton x 3100 mm Kdjdpfx Ajx R E Hwog Ujg Capacity: 200 ton x 3100 mm Backgauge: elec Locking speed: 100 mm/sec

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 100 h, machine/vehicle number: 7363126775, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Very good condition Kdodpfxox R Ed No Ag Ujg

Condition: used, functionality: fully functional, Year of construction: 2003, Capacity: 3600 x 200 tn. Distance between frames: 3150 mm. Stroke: 200 mm. Kdsdpfx Aex Rx Tweg Uog Throat: 300 mm. Control: Robosoft ATS 560 NC. Tools: 1 set. Full length. Motor: 18,7 kW. Year: 2003 Country of origin: Belgium. Size (L x W x H): 4900 x 2200 x 2650 mm. Weight: 12.500 kg. With Lazersafe ligth guard and manual crowning table. All our machines are tested and serviced before delivery.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, controller manufacturer: ESA, controller model: S 875W, bending force (max.): 220 t, working width: 4,100 mm, stroke length: 310 mm, throat depth: 410 mm, distance between stands: 3,600 mm, operating speed: 10 mm/s, reverse speed: 200 mm/s, number of axes: 8, type of crowning: CNC-controlled, oil tank capacity: 220 l, travel distance X-axis: 750 mm, back gauge adjustment: CNC-controlled, back gauge: 750 mm, number of support arms: 2, Hybrid Bending Press MVD 4100 x 220 Tons HC-Series CNC ESA S 875W 21″ *dxf 3D ready Kdodpfx Agsx N Rxcs Ujg 8 axes (Y1-Y2-X-R-Z1-Z2-X5_conical_A1) Automatic WILA crowning table Dsp Laser GIVI MISURE high-precision optical scales UNIMEC back gauge Upper tool clamp: Promecam Rolleri Type H = 150 mm Multi-cavity die, full length Press force: 220 tons Bending length: 4100 mm Distance between uprights: 3600 mm Throat depth: 410 mm Table – ram opening (“light”): 515 mm Working height: 965 mm Y-axis stroke: 310 mm Y-axis descent speed: 200 mm/s Y-axis working speed: 0–10 mm/s Y-axis return speed: 200 mm/s X-axis back gauge stroke: 750 mm Power: 18.5 kW Dimensions (L x W x H): 5600 x 2200 x 3040 mm Approximate weight: 13,700 kg

Condition: excellent (used), Technical data: Working length: 4100 mm Frame width: 3650 mm Press force: 220 t CNC Control: OPERATOR OPII graphic Color monitor size: 14" Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motorized adjustable back gauge Throat depth: 300 mm Stroke: 180 mm Automatic crowning Motor power: 17 kW Dimensions (L x W x H): approx. 4800 x 2300 x 2900 mm Weight: approx. 17 tons Accessories: Kdedpfxex N Hw Is Ag Uog New AMADA tools The seller assumes no liability for typographical or transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, bending force (max.): 220 t, working width: 4,100 mm, stroke length: 310 mm, throat depth: 410 mm, distance between stands: 3,600 mm, operating speed: 10 mm/s, reverse speed: 140 mm/s, number of axes: 4, table height: 965 mm, type of crowning: motor-driven, back gauge adjustment: CNC-controlled, power: 18.5 kW (25.15 HP), STANDARD FEATURES CNC-controlled hydraulic press brake CNC control of Y1 – Y2 – X – R axes (4 axes) CNC control unit (ESA S640 – 15” touchscreen, 2D graphic display) Offline PC programming capability Kdjdpfx Agox Nqqrj Ujg Stress-relieved, heavy-duty steel frame CNC-controlled synchronized cylinder system 310 mm stroke 410 mm throat depth ±0.03 mm precision servo-motorized back gauge Back gauge travel distance: X axis: 750 mm R axis: 250 mm Back gauge system with ball screw spindles and linear guides Sliding type front support arms Manual crowning system (wedge type) Narrow European-style lower table European-style quick-release upper tool clamping system (Promecam type) High-precision linear encoders Standard upper punch (H: 67 mm – 85° – R: 0.8) Standard lower die (60×60 mm – 4 grooves V: 16 / 22 / 35 / 50 mm) Front safety system with laser beam LED lighting Foot pedal Emergency stop buttons Safety equipment compliant with CE standards OPTIONAL FEATURES 4 / 6 / 8-axis back gauge systems starting from X + R Extension of the X-axis back gauge travel up to 1000 mm Additional back gauge fingers Hydraulic upper and lower tool clamping systems Motorized crowning system Wide lower table for multi-groove dies Front safety laser system (AKAS or DSP) Rear safety light barrier CNC-controlled sheet metal front support systems Automatic angle measurement system Oil cooler or oil heater Electrical cabinet with air-conditioned cooling system Deep throat option TECHNICAL SPECIFICATIONS (C 220 / 4100 MODEL) Bending force: 220 tons Bending length: 4100 mm Distance between side frames: 3600 mm Stroke: 310 mm Open height (distance between lower and upper dies): 515 mm Throat depth: 410 mm Table height: 965 mm Back gauge axes: X = 750 mm / R = 250 mm Approach speed: 180 mm/sec Working speed: 140 mm/sec Return speed: 10 mm/sec Main motor power: 18.5 kW Oil tank capacity: 290 liters Machine weight: ~13,650 kg Machine dimensions (LxWxH): approx. 6180 x 2650 x 3040 mm

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, bending force (max.): 400 t, working width: 4,100 mm, stroke length: 310 mm, throat depth: 510 mm, distance between stands: 3,600 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, number of axes: 4, table height: 985 mm, type of crowning: motor-driven, back gauge adjustment: CNC-controlled, power: 30 kW (40.79 HP), Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm Stroke, 510 mm Throat Depth • ESA S650 CNC Control Unit • Servo-driven backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA wedge-type) • Narrow lower beam (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-way V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • Rear backgauge options from X+R up to 4-6-8 axes • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower beam for multi-vee die • Backgauge X-axis distance 1000 mm • AKAS or DSP front laser safety system • Additional backgauge fingers • Additional backgauge stops TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 400 Bending Length (mm) 4100 Distance Between Side Frames (mm) 3600 Kjdpfx Ajx Npalsg Ujdg Stroke (mm) 310 Daylight Opening (mm) 535 Throat Depth (mm) 510 Table Height (mm) 985 Approach Speed (mm/s) 100 Return Speed (mm/s) 80 Pressing Speed (mm/s) 8 Oil Tank Capacity (L) 400 Machine Weight (kg) 22500 Main Motor Power (kW) 30 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA wedge-type) Safety System Front laser safety Origin Turkey

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, bending force (max.): 400 t, working width: 6,100 mm, stroke length: 310 mm, throat depth: 510 mm, distance between stands: 5,100 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, number of axes: 4, table height: 1,055 mm, type of crowning: motor-driven, back gauge adjustment: CNC-controlled, power: 30 kW (40.79 HP), Standard Features • Y1, Y2, X, R 4-axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA wedge type) • Narrow bottom table (European type) • GIVI brand linear encoders • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-channel V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • Backgauge options from X+R up to 4-6-8 axes • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide bottom table for multi-channel tooling • Backgauge X distance up to 1000 mm • AKAS or DSP laser front safety system • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 400 Bending Length (mm) 6100 Distance Between Side Frames (mm) 5100 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 510 Table Height (mm) 1055 Approach Speed (mm/s) 100 Return Speed (mm/s) 80 Pressing Speed (mm/s) 8 Oil Tank (L) 400 Machine Weight (kg) 33000 Kedpfsx Nn Syox Ag Usdg Main Motor (kW) 30 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA wedge type) Safety System Laser front safety Origin Turkey

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, bending force (max.): 320 t, working width: 4,100 mm, stroke length: 310 mm, throat depth: 410 mm, distance between stands: 3,600 mm, operating speed: 10 mm/s, reverse speed: 110 mm/s, number of axes: 4, table height: 955 mm, type of crowning: motor-driven, back gauge adjustment: CNC-controlled, power: 22 kW (29.91 HP), Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm Stroke, 510 mm Throat Depth • ESA S650 CNC Control Unit • Servo motorized backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European type Promecam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA cam) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper die (H: 67, 850 R:08) • Standard lower die (60x60 mm, 4-way V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4, 6, or 8-axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-channel dies • Backgauge X-travel of 1000 mm • AKAS or DSP laser beam front safety system • Additional backgauge fingers • Additional backgauge stop plates TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 320 Bending Length (mm) 4100 Distance Between Side Frames (mm) 3600 Stroke (mm) 310 Daylight Opening (mm) 535 Throat Depth (mm) 410 Table Height (mm) 955 Approach Speed (mm/s) 150 Return Speed (mm/s) 110 Pressing Speed (mm/s) 10 Oil Tank Capacity (L) 290 Machine Weight (kg) 16800 Main Motor Power (kW) 22 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Backgauge X Travel (mm) 750 Backgauge R Travel (mm) 250 Crowning Manual (WILA cam) Kdodpfx Agex Nn I Uo Uog Safety System Front laser safety Country of Origin Turkey

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, bending force (max.): 320 t, working width: 3,100 mm, stroke length: 310 mm, throat depth: 410 mm, distance between stands: 2,600 mm, operating speed: 10 mm/s, reverse speed: 110 mm/s, number of axes: 4, table height: 955 mm, type of crowning: motor-driven, back gauge adjustment: CNC-controlled, power: 22 kW (29.91 HP), Standard Features • Y1, Y2, X, R 4-axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promecam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA cam lock) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower die (60x60 mm, 4-channel V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-channel die • Backgauge X travel distance 1000 mm • AKAS or DSP laser beam front safety system • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 320 Bending Length (mm) 3100 Distance Between Side Frames (mm) 2600 Kdodpox Nn Eaefx Ag Ueg Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 410 Table Height (mm) 955 Descent Speed (mm/sec) 150 Return Speed (mm/sec) 110 Pressing Speed (mm/sec) 10 Oil Tank Capacity (Lt) 290 Machine Weight (kg) 14,700 Main Motor Power (kW) 22 CNC Control Unit ESA S640 CNC Axis Configuration Y1-Y2-X-R (4 Axis) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam lock) Safety System Laser front safety Origin Turkey

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, bending force (max.): 220 t, working width: 3,100 mm, stroke length: 310 mm, throat depth: 410 mm, distance between stands: 2,600 mm, operating speed: 10 mm/s, reverse speed: 140 mm/s, number of axes: 4, type of crowning: motor-driven, back gauge adjustment: CNC-controlled, power: 18.5 kW (25.15 HP), Standard Features • Y1, Y2, X, R 4-axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo-motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promekam quick-release die clamping system • Sliding front support system • Manual crowning system (Original WILA wheeled) • Narrow lower beam (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower die (60x60 mm, 4-channel V=16-22-35-50 mm, 850 H:60) Kdjdex Nnzbopfx Ag Ueg • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower beam for multi-channel tooling • Backgauge X travel up to 1000 mm • AKAS or DSP front laser light safety system • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 220 Bending Length (mm) 3100 Distance Between Side Frames (mm) 2600 Stroke (mm) 310 Open Height (mm) 515 Throat Depth (mm) 410 Table Height (mm) 940 Approach Speed (mm/s) 180 Return Speed (mm/s) 140 Pressing Speed (mm/s) 10 Oil Tank Capacity (L) 290 Machine Weight (kg) 11300 Main Motor (kW) 18.5 CNC Control Unit ESA S640 CNC Axes Y1-Y2-X-R (4-Axis) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA wheeled) Safety System Front laser safety Origin Turkey

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,000 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: SIMATIC, bending force (max.): 50 t, working width: 1,250 mm, power: 7.5 kW (10.20 HP), Equipment: CE marking, documentation/manual, DURMA TP9 Prunch press Year : 2011 Low hours. Very very good condition - ready to use. Tools are not included. Kdjdpfox I Rh Ujx Ag Usg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, controller model: Cybelec DNC 1200, bending force (max.): 250 t, working width: 3,550 mm, distance between stands: 3,000 mm, overall weight: 18,500 kg, TECHNICAL DETAILS Press force: 250 t Bending length: 3,550 mm Kdedpfx Agox I Ebij Usg Distance between uprights: 3,000 mm MACHINE DETAILS Controlled axes: y1, y2, x, r, z1, z2, back gauge tilt Control unit: Cybelec DNC 1200 Dimensions & weight Footprint (L x W x H): approx. 4,300 x 2,750 x 3,750 mm Machine weight: approx. 18,500 kg EQUIPMENT Two-hand foot switch Lasersafe Fisseler Hydraulic tool clamping top and bottom Die shifting Hydraulic crowning Support arms 1 set of upper and lower tools Safety guard

Condition: ready for operation (used), controller manufacturer: TS1 touchscreen, throat depth: 400 mm, installation height: 420 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, total length: 4,300 mm, total width: 1,800 mm, power: 5.5 kW (7.48 HP), travel distance Z-axis: 240 mm, empty load weight: 7,500 kg, passage width: 2,550 mm, table width: 90 mm, 7 axes: Y1 / Y2 / X / R / Z1 / Z2 / V wila / modufix / standard tooling sick laser security enlarged stroke of 240 mm Kdodpfx Agox Immye Usg enlarged depth of throat of 400 mm Capacity: 80 ton x 3100 mm Backgauge: CNC Locking speed: 300 mm/sec Height: 3160 mm (with arm)

Condition: ready for operation (used), controller manufacturer: Cadman B + Touch, throat depth: 400 mm, operating speed: 11 mm/s, reverse speed: 113 mm/s, total length: 4,355 mm, total width: 2,525 mm, total height: 3,000 mm, power: 20 kW (27.19 HP), travel distance Z-axis: 300 mm, empty load weight: 6,500 kg, passage width: 2,050 mm, table width: 150 mm, 8 assen: Y1 - Y2 - X - X' - Z1 - Z2 - R - V Easy Form Lasermeetsysteem (EFL) Wila modufix gereedschap (boven- en onderhydraulische klemming) Kodpfxex Imm He Ag Usdg lasersafe beveiliging 2 verplaatsbare plaatdragers Vergrote opening van 500 mm!! Capacity: 80 ton x 2500 mm Backgauge: CNC Max distance between table -- ram: 500 mm!! Locking speed: 130 mm/sec

Condition: ready for operation (used), controller manufacturer: Delem DA65W, throat depth: 410 mm, installation height: 450 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, total length: 4,980 mm, total width: 2,240 mm, total height: 2,840 mm, power: 11 kW (14.96 HP), travel distance Z-axis: 180 mm, empty load weight: 13,000 kg, passage width: 3,760 mm, table width: 180 mm, 7 axes: Y1 /Y2 / X / Z1 / Z2 / R1 / R2 Amada bombation Capacity: 170 ton x 4230 mm Backgauge: CNC Locking speed: 100 mm/sec Ksdpfex Immtox Ag Uedg