Rst-Connect Ug

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, working range: 3,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness aluminum (max.): 50 mm, table height: 1,750 mm, table length: 3,710 mm, working width: 1,500 mm, table width: 1,960 mm, We are selling a Swift-Cut 3000XP CNC plasma cutting center with a Hypertherm MAXPRO200, purchased mid-2023. The machine has seen very little use. According to the manufacturer, the maximum sheet thickness is 50 mm; we have cut sheets up to 40 mm thick. The cuts were clean and straight, with minimal slag. Piercing in the middle is possible up to 32 mm thickness. Ksdpsxxighjfx Ac Nedw The machine offers online support from Swift Cut in both English and German. Solid Edge software is installed on the machine. The machine is immediately available. We are planning to invest in further production equipment. The unit is located at our subsidiary in the Czech Republic – Vrbno pod Pradědem.

Condition: good (used), Year of construction: 2016, functionality: fully functional, overall weight: 12,000 kg, total width: 10,000 mm, total height: 3,500 mm, total length: 12,000 mm, travel distance X-axis: 3,000 mm, travel distance Z-axis: 400 mm, MICROSTEP SPL-PA 6001.20 plasma cutting system - with a total of 2 cutting units - Y-axis travel: approx. 2 x 3000 mm The machine is equipped with a MICROSTEP control unit, a plasma source from KJELLBERG, and an extraction system specifically designed for this machine by DONALDSON. Note: The item must be collected between 19 and 23 January 2026 on a firmly agreed date yet to be determined. FCA D-76571 Gaggenau – loaded onto truck Kdjdpfxexw Thgs Ac Njw

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, working range: 12,000 mm, sheet thickness (max.): 300 mm, sheet thickness steel (max.): 300 mm, sheet thickness aluminum (max.): 60 mm, cutting current: 300 A, warranty duration: 36 months, travel distance X-axis: 3,000 mm, travel distance Y-axis: 12,000 mm, travel distance Z-axis: 450 mm, type of cooling: water, One of the most advanced and efficient plasma cutting machines on the market! Thunder 3D is a plasma system capable of cutting and beveling steel plates, pipes, and profiles, as well as open sections such as H, L, C, and T beams. 100% MADE IN POLAND! Travel speed up to 60 m/min! Working area: 3000x12000 mm (other options available from 1500 mm to over 30,000 mm) Compatible with Hypertherm and Kjellberg plasma units. Kdjdpfx Ajxw Ihhoc Njw Optional gas torch (propane, acetylene, natural gas). 3D bevel head with a rotation angle of at least: ±93° on the A axis and at least: ±50° on the B axis. Capable of cutting V, A, X, K, Y, and 2Y bevels. Access to Industry 4.0 application. For more detailed information, please contact us.

Condition: new, Plasma cutter Erfi PS990 Manufacturer: Erfi Type: PS990 Plasma cutting machine ERFI PS990 - powerful, single-stage plasma cutter. Up to 20mm clean cut in steel, up to 25mm separating cut. Contact-free ignition by HF-ignition also on paint and rust by pilot arc. Includes 6m torch, standard filter and integrated pressure reducer with pressure gauge. The ERFI devices are produced with the utmost care in Germany - that is why ERFI always gives a guarantee of 3 years - without restriction. Kdsdpfjxwmb Tex Ac Nsw Technical data: Mains voltage 3x400V Frequency 50Hz Fuse protection 32A slow-blow Cutting current 60A level 1/ 90A level 2 Air pressure 6-10bar Weight 105kg Available immediately. For collection by the customer. Forklift available. Shipping also possible Subject to errors and prior sale

Condition: ready for operation (used), Year of construction: 2008, operating hours: 22,560 h, General Data Measurements width 540 Kdjdpfx Acsxwfm Io Now Measurements depth 960 mm Measurements height 1050 mm Machine weight 196 kg Table Outer length 4500 mm Outer width 2000 mm This plasma cutting machine was manufactured in 2008. It features a CNC control MSNC500P Windows and a plasma source with a cutting range of 0.5 to 25/30mm, adjustable from 10 to 160 A for cutting. The flame cutting table measures 4500x2000mm, suitable for both plasma and oxyfuel cutting. It operates efficiently within a temperature range of +5 to +45 °C. Consider the opportunity to buy this MicroStep SPL-P 4501.25 plasma cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2017, General Data Ksdpoxv Ezpofx Ac Nedw Machine weight 9000 kg Measurements height 2300 mm Measurements depth 4300 mm Movement X-Axis Movement 3000 mm Y-Axis Movement 1200 mm Main Drive Number of axis 3 Dimensions Machine Length 15000 mm This 3-axis Hypertherm PL-YPE 3100 was manufactured in 2017 and features a Hypertherm® HyPerformance HPR 400XD gas plasma source. It offers precise cutting with a maximum capacity of 50 mm in mild steel, 75 mm in stainless steel, and 45 mm in aluminum. The effective cutting area is 3000 mm by 1200 mm. If you are looking to get high-quality cutting capabilities, consider the Hypertherm PL-YPE 3100 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 700 mm Measurements depth 1054 mm Measurements height 978 mm Machine weight 197 kg Kodpfxsxvfhce Ac Nedw This Thermal Dynamics UltraCut 200 was manufactured in 2012. It features a robust output current range of 10-200 A and a duty cycle of 100% at 200 A, ensuring continuous operation. The cutting capacity on mild steel reaches up to 40 mm with a maximum edge start of 65 mm. It includes a liquid-cooled XT-300 precision torch and a DFC-3000 digital gas console with touchscreen. For more information about this machine, please reach out to us. Application Types Cutting

Condition: used, Year of construction: 2023, CNC Gantry Plasma Cutting Machine with Rotator Manufacturer: Microstep Model: MasterCut 6001.30PtkG Year of manufacture: 2023 CNC control system Working area: 3,000 x 6,000 mm 1 plasma torch with Kjellberg Q3000 power source 1 oxy-fuel torch GCE FIT+ three (cutting gas: acetylene) Burning table with sectional extraction 6,000 x 3,000 mm 'Plasma Rotator MasterCut' with fully automated support ACTG automatic calibration unit for the beveling system Kemper Extraction System 8000 (year 10/2015) Asper Basic 2D programming software + Asper BevelCut bevel cutting programming Other technical specifications: MicroStep machine control with MMI console and 24" touchscreen iMSNC module expert system iMSNC module for automatic calibration of mechanical sensing iMSNC module assistant for loading CNC programs LCD control unit on the gantry Laser pointer with automatic offset transfer USB 3.0 connectivity for storage devices MicroStep RemoteDiagnostics remote maintenance module Grate cover for cutting table Kdjdpfsxu U Ddsx Ac New Reinforced design of cutting table Interface for fine plasma source to CNC control Control for automatic gas console Electrical and mechanical torch sensing LED signal tower on the gantry bridge (2 colors) Tactile shutdown device for guide rails Light barrier safety (collision protection) on the gantry bridge with emergency stop Smart Z Movement ACTG calibration report Fully automatic oxy-fuel support Automatic gas console for oxy-fuel torch (cutting gas: acetylene) Active collision protection 71125

Condition: ready for operation (used), Year of construction: 2015, Main Drive Maximum sheet thickness 3mm - 80 mm This VOORTMAN V304 was manufactured in 2015. A robust plasma cutting machine, it's ideal for precision cutting tasks. Consider the opportunity to buy this VOORTMAN V304 plasma cutting machine. Contact us for further details. Ksdpfx Acexulfrj Nodw Application Types Cutting

Condition: ready for operation (used), Year of construction: 2011, This MicroStep EasyCut 6001.25PrGB was manufactured in 2011. It is a CNC plasma/oxyfuel cutting machine designed for industrial, heavy-duty applications. Features include a large working area of 6000 × 2500 mm, dual-side driven gantry, and compatibility with CAM software like mCAM and AsperWin. It supports up to 6 oxyfuel torches and offers options like automatic height control. Note: the gas console is defective. Contact us for more information about this machine. Application Types Cutting Kodoxuaywopfx Ac Nodw

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: 2000422, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser hours: 1,480 h, laser power: 6,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 15 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,050 mm, working width: 1,515 mm, working height: 1,480 mm, power: 6 kW (8.16 HP), compressed air connection: 8 bar, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, 6kW fiber laser cutter, year 2023, with 2 automatic tables. Like new condition. Kodpfx Aexr U Idoc Nsdw

Condition: ready for operation (used), Year of construction: 2015, This KOIKE PNC-12 EXTREME plasma cutting machine was manufactured in 2015. It features a robust CNC control system and an effective cutting area of 1500 x 3000 mm. Capable of handling a maximum cutting thickness of 50 mm and equipped with rapid travel speeds up to 4000 mm/min, it ensures efficient operation. Consider the opportunity to buy this KOIKE PNC-12 EXTREME plasma cutting machine. Contact us for more information about this machine. Application Types Kdedpfx Acsxr Rwzj New Cutting

Condition: excellent (used), Year of construction: 2021, Very recent Durma plasma Type PL 30120 Capacity 3000 x 12000 mm Source Hypertherm XPR300 CNC bevel cutting head +/- 45 degrees Kdedpfxjxruc Uj Ac Nsw Including rotary axis for cutting pipes ø50 to ø400mm Complete with Donaldson extraction system

Condition: ready for operation (used), Year of construction: 2013, This MGM Omnicut 3100 was manufactured in 2013. A robust plasma cutting machine, it features a 12-meter table and a powerful Kjellberg HiFocus 360i plasma source. It efficiently handles mild steel up to 80 mm, stainless steel up to 80 mm, and aluminum up to 100 mm. If you are looking to get high-quality cutting capabilities, consider the MGM Omnicut 3100 machine we have for sale. Contact us for more information. Kdsdexrhdrepfx Ac Njw Application Types Cutting

Condition: ready for operation (used), Year of construction: 2015, operating hours: 558 h, functionality: fully functional, Plasma Cutter MGM MS300 + Hypertherm HPR130XD Fully operational | Excellent condition For sale: a powerful and reliable MGM MS300 CNC plasma cutter equipped with the Hypertherm HyPerformance HPR130XD plasma source. The machine is in perfect working order, well maintained, and immediately ready for production use. ✅ Specifications: Kdsdpfx Acoxq Ta Ae Now Model: MGM MS300 Plasma source: Hypertherm HPR130XD Cutting range: 1.5m x 3m PowerPierce™ Technology – excellent piercing capability HyPerformance Automatic Gas Consoles (O₂ / N₂) Control: Industrial touchscreen controller Automatic height control (IHT) Includes compressor and control cabinet Voltage: 3-phase 400V Year of plasma source: 2015 Operating hours: Low usage, everything operates properly Purchase invoice available – can be shown upon request. 🧰 Condition: The machine is in excellent technical and optical condition with high precision. Price includes transport (within Belgium) VAT excluded

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 5500 mm Measurements depth 8100 mm Measurements height 2500 mm Main Drive Number of axis 4 Kjdpfxoxqtfrs Ac Nsdw Additional Equipment Dust & Fume Extraction System: Air Flow: 12000 m³/h Filter Area: 171 m² This 4-axis Baykal BPS-3006 was manufactured in 2020, featuring a CNC Plasma Cutting Machine with a cutting table size of 3000 × 6000 mm. It includes a rotary axis for tube and pipe cutting and is equipped with a Hypertherm HPR 130XD plasma source. If you are looking to get high-quality cutting capabilities, consider the Baykal BPS-3006 machine we have for sale. Contact us for more information about this machine. Application Types Cutting

Condition: good (used), Year of construction: 2015, ESAB Combirex DX 3500 Plasma Machine Plasma Unit : ESAB m3 362 Precision 360A Oxygen Plasma Oxy Fuel Station, Automated Oxy-Fuel Torch with GPB Nozzle Capacitive Height Control Track Width : 3500m, Track Length : 8000mm, Cutting Width : 2500, Cutting Length : 6000mm Vision T% Interface, Power Cable, Gas System with Solenold Valves, Laser Point For Plate Location and Alignment, Light Guards Front And Rear. Kdodpfx Acjxqqfij Nsw

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,800 h, Table Table load 7500 kg This VOORTMAN V320 was manufactured in 2019. It features a Kjellberg Smart Focus 300 plasma source and a Donaldson DFPR06 extraction system. Capable of handling mild steel with a panel length range of 850 – 6,100 mm and thickness from 6 – 75 mm. It includes options for punch marking and countersinking, enhancing versatility. Consider the opportunity to buy this VOORTMAN V320 plasma cutting machine. Contact us for more information about this machine. Application Types Kodoxp Sr Iopfx Ac Nodw Cutting

Condition: ready for operation (used), Year of construction: 2018, This ECKERT Onyx was manufactured in 2018. It features a robust table size of 2500 × 13000 mm and a cutting table of 2500 × 13500 mm, equipped with two fume exhaust channels. It includes two gas cutting heads capable of handling up to 300 mm thick mild steel and a Kjellberg Smart Focus 300 plasma source. Ideal for large-scale cutting tasks. Contact us for more information about this machine. Application Types Kedoxpypbspfx Ac Nodw Cutting

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand ESAB Model Vision 51 Main Drive Number of axis 2 Kdodsxn Dktspfx Ac Now This ESAB Eagle 2000 plasma cutting machine was manufactured in 2007. It features a custom-built 2000 x 4000 mm cutting table and is equipped with an ESAB M3 plasma system capable of handling plate thicknesses up to 30 mm in carbon steel. The ESAB Vision 51 CNC controller enhances operational efficiency with a user-friendly interface. Consider the opportunity to buy this ESAB Eagle 2000 plasma cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: good (used), Year of construction: 2010, Offer 25375 Ksdpsxnivzsfx Ac Njdw Technical Data: - Working area / cutting length with approx. 5 m rails: approx. 3000 mm - Working area / cutting width: approx. 1500 mm - Controller: BACH - Track gauge: approx. 1900 mm - 1 plasma torch with height adjustment - Plasma source: KJELLBERG Hi FOCUS 160 i - Cutting current at 100% duty cycle: 10 - 160 A - Cutting range (steel): approx. 5 - 50 mm - Cutting range (aluminium): approx. 5 - 35 mm - Cutting range (stainless steel): approx. 5 - 30 mm - Connection: 400 V / 35 kVA - Extraction table with extraction unit, make: TEKA, type: Filtercube 4 H, year 2010 - Weight: approx. 4 t - Space requirement for system: approx. L 7.5 x H 1.5 x D 2.4 m - Space requirement for extraction unit: approx. L 1.5 x H 3.5 x D 1.5 m

Condition: good (used), Year of construction: 2019, functionality: fully functional, sheet thickness (max.): 30 mm, table length: 6,000 mm, table width: 2,000 mm, - Includes Katana control system - Kjellberg Hi Focus 161i neo plasma source with automatic gas mixing console - Machine table size: 6,000 x 2,000 mm - Marking and cutting of structural steel up to 30 mm (also suitable to a limited extent for aluminium and stainless steel) - Includes nesting software Sigmanest (dongle version with no ongoing costs) - Includes accessories (see pictures) - Includes extraction system (see pictures) Kjdpfx Acoxl Ayzo Nodw The machine has been regularly maintained and seldom used (approx. max. 8 – 15 hours per week). The plasma cutting system is still in operation and can be inspected and tested on site by prior appointment. We are happy to recommend a specialist company to assist you with dismantling and relocating the machine if required. Original purchase price WITHOUT accessories: €140,000 plus VAT. Subject to change and error. Sale exclusively to businesses, with VAT shown separately. No warranty or guarantee. Immediately available. No dismantling or delivery – collection ex works only!

Condition: used, Year of construction: 2010, functionality: limited functionality, machine/vehicle number: 21006585, sheet thickness steel (max.): 15 mm, ESAB Combirex DX3000 with only plasma function, complete including table and extraction system Kdjdpfx Acjxlxvfe Nsw

Condition: used, Year of construction: 2018, Opportunity to buy an outstanding ESAB plasma cutting machine built in 2018. Equipped with: ESAB DMX KIT automatic plasma beveler + iSeries 300 BEVEL PT 36 plasma torch with cutting and marking function Integrated water cooler and coolant Multi-point collision protection system Carbon steel injection: 40 mm Maximum cutting thickness for carbon steel: 45 mm Stainless steel injection: 25 mm Maximum cutting thickness for stainless steel: 30 mm Aluminum injection: 25 mm Maximum cutting thickness for aluminum: 30 mm Kdsdpfxoxltg Sj Ac Nsw Availability: 02/2026 Viewing possible upon appointment. Multiple videos of the machine in operation available on request. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection. CNC Control: Esab Vision T5 Plasma source: iSeries 300 BEVEL Travel path length: 9000 mm Table width: 3400 mm Table length: 6500 mm Cutting width: 3000 mm Cutting length: 6000 mm Table height: 700 mm Exhaust section length: 515 mm Speed: up to 24000 mm/min Connected voltage: 230V Frequency: 50/60 Hz Power consumption: 2000 VA

Condition: good (used), functionality: fully functional, Thermal-Dynamics plasma and oxy-fuel cutting table, model ULTRA-CUT 300XT CE Technical specifications Working area: 12000 x 3000 mm Overall dimensions: 14000 x 5000 mm Machine weight: approx. 5000 kg Power supply: single-phase 220 V - 3 Amp Torch height control: automatic adjustment Kdsdpfoxlqx Esx Ac Nsw Equipped with a CNC controller featuring motion control, I/O, user interface, and an integrated optional plasma height control, all in one package. Runs on Windows 7, 2 GB RAM, 2 USB ports, 120 GB SATA SSD hard drive, etc. Sold with its manual. Retrofit completed in 2021. Selling due to modernization of facilities.