Pee-Wee Kaltwalz- und Rohrbearbeitungsmaschinen GmbH

Condition: used, Year of construction: 2003, Ex-Cello XK 275 Cold Rolling Cell comprising Ex-Cello XK 275 cold rolling machine (2003) 45 kW drive power 1,000L hydraulic tank capacity 1,950mm maximum slide stroke 1,400+330mm or 915+815 mm maximum bar length 60mm maximum profile outside diameter 175mm maximum profile width Bsdpfxez Stlme Ap Dsww 0,3 2,0m gear module range 56mm maximum workpiece diameter 800mm maximum workpiece lenght Felsomat FZ250 infeed and outfeed system (2003)

Condition: used, Year of construction: 2015, overall weight: 16,000 kg, total height: 2,200 mm, total length: 4,410 mm, total width: 2,600 mm, GROB C6-A – Cold Rolling Machine Technical Data: Bsdpfxoz E Ra Ho Ap Dsww Gear Module: up to approx. 2.3 Gear Diameter: approx. 8–80 mm Max. Clamping Diameter: approx. 315 mm Power: 25 kW Weight approx.: 16,000 kg Dimensions (LxWxH) approx.: 4410 x 2600 x 2200 mm Year of construction: 2,015 Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: used, Year of construction: 2011, rotational speed (max.): 375 rpm, Cold Rolling Machine Manufacturer: GROB-WERKE Type: C6 Year of manufacture: 2011 Control system: Siemens Sinumerik 840D sl Technical data: - Center height: 1,150 mm - Z-axis: 1,559 / 307 mm - X-axis: 16 – 80 mm Rolling spindle: - Swing diameter: 92 mm - Rolling spindle speeds: 0 – 3,000 rpm - Rolling roll clearance – axial: 0.025 mm - Feed rates (infinitely variable): 0 – 30,000 mm/min - Rapid traverse: 30,000 mm/min - Swivel angle range: ±3.2° - Max. speed – main spindle: 375 rpm Tailstock/Counter-support - Piston stroke: 400 mm - Piston diameter: 90 mm - Effective piston area: 63.6 cm² Bwjdpfozdk Iksx Ap Dew In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. Bodpfx Aot Hw D Dep Deww * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Bjdpfxod Nw Tts Ap Deww Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv