K+S GmbH Modell- und Formenbau

Condition: used, Year of construction: 2012, operating hours: 4,660 h, functionality: fully functional, machine/vehicle number: A0100-80069, We are offering this used Hennecke ELASTOLINE F elastomer casting machine, year of manufacture 2012. Kdsdpfx Agsx R Thce Uog The machine is in good used condition. If you have any questions or require further information, please write to us or give us a call.

Condition: used, Year of construction: 2020, functionality: fully functional, Technical Details: Manufacturer: • MEYER PLANTTEC • PLANER Systemtechnik Model / Designation: Weighing System Ricon 603 Control Cabinet Type: 2005767 = P1 Power Supply: 400 VAC / 50 Hz Control Voltage: 24 VDC Maximum Fuse Capacity: 25 A Rated Current: 8 A Total Weight: 60 kg Kdedpfjx Itr Nsx Ag Ujg Serial Number: 2005767-1 Year of Manufacture: 2020 PST Drawing Number: 161-10-760-02 2. System Overview (Visible Components) 2.1 Structural Frame • Welded steel frame with grating work platform • Integrated drum support area • Mounted linear guide rails and table elements • Lower grating section for drainage or spill containment 2.2 Pump and Mixing Area Mounted on the left side: • Vertical, motor-driven pump assembly equipped with INVEOR motor controller • Pump inlet connected to a chemical container positioned on the system frame • Stainless steel piping connected to the valve block and dosing line 2.3 Valve and Drive Unit • Stainless steel valve block with flange connections • Pneumatic rotary actuator: AIR TORQUE Germany Type/Model: SC0050-AJZ Series: FGF-010-S-17 Pressure Range: max. 10 bar Torque Values: 29 Nm (min) / 60 Nm (max) Temperature Range: –40 °C to +180 °C Connections: 1/4" Certification: CE, ATEX (EX II 2 G Ex h IIC T6 Gb X / Ex h IIIC T85°C Db X) Year Code: 20138769

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: Henneke MT6, Henneke high-pressure mixing head MT series "MT6" Kdedpfxox El Dro Ag Ueg

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, Mould carrier for polyurethane processing, swivelling universal mould carrier, condition good to very good, including control system and hydraulic unit, clamping area approx. 1250 x 1400 mm, parallel stroke 200 mm, with additional intermediate plate, not part of the offer, opening width 897 mm, swivel angle 40°, dimensions (H x W x D) 2410 x 1863 x 3310 mm, safeguarded by light barriers, inspection possible by appointment, drawings and further technical data available on request. Kdedpfexqmnaox Ag Uog

Condition: used, Year of construction: 2021, functionality: fully functional, Bespoke Hot Table, we built to cast hot polyurethane components, we were holding tool temps at 110 degrees to cast the parts. So perfect for molding casting or curing. Also with close down sides to protect the bed when not in use. Heat Transfer Oil S2 machined Aluminum table with oil ways for circulation we found to be much more efficient than electric. Using a Tool Temp TT-181 reconfigured for oil usage - directly by Tool Temp temperature 0-150 degrees ( we have never tried higher) Circulation cut off valve for flow and return Heat Pipes changed before decommissioning Spare pump connectors provided Being sold as the department has closed and the machine is no longer required. Kdsdpfx Aexpxmxog Usg Sizes Heated Bed 600mm wide x 1800mm long x 60mm thick Bed Height 930mm Table sizes 660mm Width 1860mm total length Closed Height 970mm Full working condition - Ex works Aylesbury Buckinghamshire England, we can export at a additional cost. Can be seen working

Condition: ready for operation (used), PE-KPE pipe welding machine, butt fusion machine, plastic pipe welder, mirror fusion machine, DYTRON ST 160, Used machine Manufacturer: DYTRON Model: ST 160 Kedpfx Agjxnqt Ue Uedg Overall dimensions: Length: 1000 mm Width: 530 mm Height: 1160 mm Electrical data: 230 V DYTRON – Welding Bench ST-160 The ST 160 welding bench is designed for socket and mirror welding of thermoplastic pipes. It supports: Mirror (butt) welding: 40 – 160 mm diameter Socket welding: 40 – 110 mm diameter To facilitate mirror welding, the set includes: Special mobile workbench Electric pipe planer POLYS P-4a welding unit (1200 W) Clamp inserts in sizes: d40, 50, 63, 75, 90, 110, 125, 140 mm Welding pair sets: d40, 50, 63, 75, 90, 110 mm Vise-style clamping mechanism for fittings Mirror insert: d170 Metal case for accessories Support stand Allen keys: 4 mm and 8 mm The ST-160 welding bench is equipped with a microprocessor-controlled welding unit. The standard set also includes a special workbench and a metal case with accessories. ST-160 Technical Specifications Feature Specification Socket welding range 40 – 110 mm Mirror (butt) welding range 40 – 160 mm Welding unit power 1200 W Planer power 630 W Power supply 230 V / 115 V Temperature control Electronic regulator Temperature range 180 – 280 °C Temperature indicator LED diode Planer Electric Weight 70 kg

Condition: used, Year of construction: 2007, For sale: Cannon Afros A-System 40 Penta Twin high-pressure polyurethane dosing line, adapted for use with flammable blowing agents such as cyclopentane or other hydrocarbons. The line is equipped with an air nucleation system for adding CO2 to the polyol. Sale based on a VAT invoice at 23%. For more information, please call. Kdjdpfxew Rfi Rj Ag Ujg

Condition: ready for operation (used), Movable welding bench MP 75, PE welding bench, PE pipe clamp, Socket fusion welder, Used machine Overall dimensions: Length: 665 mm Width: 480 mm Height: 380 mm Ksdpfxswxvvxo Ag Usdg Pipe clamp size: 40–75 mm Weight: 15 kg The MP‑75 welding bench can be used with any fittings sized 40–75 mm, since each clamping jaw can be adjusted individually. Any suitable welding machine can be used for the welding process (not included with the bench). The total weight of the bench is only 15.5 kg. If the two outer jaws are not needed during welding, they can be removed, reducing the total weight by about 4 kg. The construction ensures the ideal fixation of pipes and fittings to be welded.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: sn. 816, feed length X-axis: 2,600 mm, feed length Y-axis: 1,300 mm, total width: 4,000 mm, total length: 3,600 mm, total height: 3,500 mm, warranty duration: 12 months, cutting height (max.): 1,300 mm, space requirement length: 4,200 mm, space requirement width: 4,500 mm, space requirement height: 3,600 mm, Polish manufacturer of machines and equipment for cutting and processing polyurethane foam with over 25 years of experience offers for sale a brand-new automatic horizontal cutting machine, Model: TYPE PARK. The machine features a stable and robust steel construction. Cutting is performed by the movement of the cutting frame along the X and Y axes, while the table remains stationary. The cutting frame is driven by two reinforced toothed belts and moves on linear bearings along the X-axis. In the Y-axis (up and down movement of the frame), the feed is powered by two ball screws and linear bearings. The machine supports both single-sided and double-sided cutting modes and includes an automatic cutting correction system for double-sided cutting. Machine equipment includes: Automatic, self-adjusting saw blade tensioning system Stationary table with powered conveyor belt for easy material loading Automatic cutting length measurement Quick-change system for the saw blade Automatic material clamping system Working parameters: Cutting width: 2100 mm Cutting length: 2500 mm The machine is fully enclosed with safety fencing and equipped with safety light curtains at the loading and unloading zones. As the manufacturer, we provide installation and servicing within the EU. Kdedpfx Aowq Dvdeg Ueg The machine is CE certified. We also offer a wide range of machines and devices for cutting foam and mineral wool. We invite you to explore our full range of products.

Condition: like new (used), Year of construction: 2005, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: will advise enquirer, pressure: 200 bar, this machine has very little use and is as new condition Kedpjwgkhrjfx Ag Uedg

Condition: ready for operation (used), Year of construction: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25000l mixing tanks, a casting robot and two release agent robots is available. Capacity: 225t/24h, tool carriers: 42, mixing positions for additive mixing: 10, mixhead type: MQ, max. working pressure: 180bar, pressure tank: 330bar. Foam types: Rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible. Kjdpfx Agjttbd Ns Uedg