Schreinerei Eichenseer

Condition: used, OTT Tornado - TOP Control via a 15-inch color touch monitor for full automation and maximum operating convenience CM-CombiMelt gluing system suitable for processing both EVA and PUR hot-melt adhesive as well as all standard cleaning granulates Joining unit for bonding chipboard panels Automatic roll magazine Automatic edge magazine Double end trimming unit with automatic swiveling 0° / 3° Flush trimming unit - for flush trimming - 12mm Fine radius trimming unit - radius trimming - profile cutters R2 - R5 Automated copy milling - corner rounding Scraper unit - radius - chamfer Hjdpfx Aceyym Dcovek Flat scraper unit Release agent spraying device - PU Cleaning set with fine polishing unit Very stable workpiece support with roller conveyors - FRONT with scissor extension Complete set of tools included Machine is in EXTREMELY WELL-MAINTAINED CONDITION Machine from a joinery workshop Available from stock in Lieboch

Condition: used, Year of construction: 2009, Upgrade for 2 mm 1st milling station; combination jointing cutter, Leuco surface scraper blade. Min./max. workpiece thickness: 10-40 mm. Min. workpiece length: approx. 180 mm. Ready for operation in approx.: 3.5 min. Feed speed: approx. 7 m/min. Dimensions approx.: 3300 x 1300 x 1400 mm. Weight: approx. 600 kg Storage location: Supplier Hodpsyymz Isfx Acvjk

Condition: used, Holz Her Auriga 1308 FÜ + PU Compact design – edge thickness 0.4 – 6 mm SPS touchscreen control Edge-Control PPC 221 color screen Pre-milling unit for preparing prior to adhesive application Fully automatic edge magazine for coil and strip material Glue application station GLU-JET, EVA and PUR adhesive (cartridge or granulate) + PU Glue application via nozzle technology Workpiece height 6–65 mm Automatic glue height adjustment Pressure unit 1912-3, pneumatic End trim unit 1918, pneumatic, for coil and strip material up to 8 mm edge thickness With pneumatic adjustment for trim saw angle 0–10° Milling unit 1827 MOT 4, flush milling 8 mm, radius milling – chamfer milling – 15°, 1827 MOT NC axes via control panel Corner rounding unit 1832 SPS, corner rounding for edges up to 3 mm thickness in through-feed operation Scraper unit for chamfers and radii with 2 scraper holders (motorized) Surface scraper unit – finish Spray unit – PU Complete set of DIA tools included Few operating hours / from a craftsman's workshop Machine is FACTORY OVERHAULED and in TOP CONDITION Available ex stock Lieboch Hjdpfx Acoyyl U Hovsk

Condition: used, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, feed rate X-axis: 7 m/min, The used FELDER G 460 is a compact and powerful edge banding machine designed for professional applications in crafts and small-scale industry. It enables precise edging and post-processing of edge materials, impressing with reliable technology, user-friendly operation, and high-quality workmanship results. Machine features: - Glue unit for hot-melt adhesive - End trimming unit (front/rear) - Flush milling unit - Fine milling/radius unit - Combined radius and surface scraper unit - Sturdy machine construction Hjdoyyk Sqepfx Acvok Further technical data: - Edge thickness: approx. 0.4 – 3 mm - Workpiece height: approx. 10 – 45 mm

Condition: excellent (used), 4-SIDES LINE of Sizing-Edge Banding and Drilling, composed of the following machines: A) Loader (portal/bridge) double pick-up station "IMA" with central motorized rollers conveyor. Hjdpfx Aceyyb Susvjk With 2 external on-ground roller ways to in-feed the piles (stacks) of panels to the Loader. B) 1st Double-side Sizing & Edge Bander "IMA" Mod. Combima/N/II/230/A/R3 (mm 1300) C) Turning Station "IMA" (from lengthwise to crosswise) with double cone system. D) 2nd Double-side Sizing & Edge Bander "IMA" Mod. Combima / II /740 / B / R3 + (mm 3300) With KFA 30 (multi-profile copying Unit for fine-trimmimng and corner rounding) E) Drilling machinee "IMA" Mod. I-Magic (with 2 horizontal units + 4 bottom vertical unitsi) F) Motorized rollers conveyor "IMA" G) Turning Station "IMA" (from lengthwise to crosswise) with double cone system. H) Stacker (portal/bridge) double stacking station "IMA" with central motorized rollers conveyor. With 2 external on-ground roller ways to out-feed the piles (stacks) of panels from the Stacker

Condition: excellent (used), Year of construction: 2023, Biesse Akron 1330 A Edgebander Single-sided edgebander AKRON 1330-A Gluing Unit SP03 End trimming Unit IT03 Fine trimming Unit RF02 Corner rounding Unit AR02 PRE-MILLING UNIT RT02 Symmetrical diamond tools H=45 mm Z=2+2 30° included. EDGE SCRAPER RB02 Tools are not included. GLUE SCRAPER UNIT RC02 BRUSHING UNIT SZ02 SUPPLEMENTARY LATERAL PANEL SUPPORT KIT FOR THE INSTALLATION OF THE PANEL RETURN SYSTEM MANUAL INFEED SYSTEM FOR NARROW PIECES KIT FOR PROCESSING "SHADOW LINE" PROFILE PANELS STRAIGHT AIR TABLE AT THE MACHINE INFEED ANTIADHESIVE UNIT ADZ02 PAIR DIAMOND-COATED MILLING CUTTERS H=65 mm Z=2+2 30°.In replacement of standard tools. HYBRID GLUING CHUCK FOR GRANULATED EVA/PUR GLUE INSTEAD OF THE STANDARD SYSTEM TM15 HYBRID PREMELTER FOR EVA/PUR GLUE ADAPTIVE INFRA RED LAMP AdIRL-700 AX-4, NC AXIS ON FINE TRIMMING UNIT PRO-NESTING KIT FOR FINE TRIMMING UNIT Pair of multiprofile milling cutters for fine trimming unit: chamfering 25 degrees, R=2 mm + R=1 mm, straight profile for solid wood AX-2, NC AXIS ON CORNER ROUNDING UNIT ROUNDING FUNCTION ONLY SLIDING UNIT FOR CORNER ROUNDING UNIT Hodpfsyyb Icex Acvek Pair of milling cutters, R=2 mm, for corner rounding unit Pair of milling cutters, R = 1 mm, for corner rounding unit AX-4, NC AXIS ON EDGE SCRAPER PRO-NESTING KIT FOR EDGE SCRAPER UNIT Pair of knives R=2 mm, for edge scraper Pair of knives R=1 mm, for edge scraper CLEANING UNIT LPT02 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Edge banding machine Felder G660, Pre-milling units, Glue application by roller, Pneumatic pre-cut guillotine, Pressure rollers, Trimming saws for finishing cut, Top and bottom milling unit R1 – R2, Profile scraper, Hsdpfsyx U Tcex Acvek Flat scraper, Polishing unit, Edge thickness 0.4-3mm, Max panel height 60mm, Total power requirement 7KW, Good condition, ready for testing.

Condition: used, Year of construction: 2016, Central pneumatic valve manifold, bus-controlled. Optimized maintenance unit with pressure sensor. Additional control air supply and pressure build-up valve. Chain feed with 2 feed speeds: 12 and 20 m/min. Drive motor 2.2kW (S6). Minimum workpiece length 140mm. Minimum workpiece width varies depending on workpiece length, height, and surface condition. 20 m/min feed is only possible up to a maximum edge thickness of 3mm and a maximum workpiece height of 25mm. When the corner rounding unit is selected, the speed automatically decreases to 12 m/min. Segmented, rubberized support pads with quick-change system. Minimum workpiece width varies depending on workpiece length, height, and surface condition. Electrically: 3x400V 50Hz. If a residual current circuit breaker (RCD) is upstream of the machine, it must be an all-current sensitive residual current device, type B, suitable for frequency inverter operation, with a tripping current of 300mA. End position damping for cross-cut saw unit. Jointing unit with plunge-controlled diamond cutters; speed 12,000 rpm, 4.4kW, max. cutting depth 3mm. Jointing cutter with diamond blades Z2+2, D-60 x 64 mm. e-Motion control. Extension frame for tempora 60.12. Machine base of the tempora 60.12 edgebander is made of thick-walled, electrowelded steel construction, featuring ribbing for high stability. Pneumatic-mechanical infeed lock for workpiece distance monitoring: a pneumatically controlled steel bolt prevents infeed of workpieces before the minimum distance is met. Prepared for retrofitting a pre-melter. Operating tools for tempora series. Workpiece feed and feed fence: the feeding support surface is designed as a roller bed for sensitive surfaces. The robust feed fence has a length of 1100mm. The jointing removal for the jointing unit is electrically position-controlled from 0-3mm at the feed fence and displayed via e-motion control. Upper pressure beam tempora 60.12E: made of welded, torsion-resistant steel construction. Motorized, controlled adjustable workpiece height from 8-60mm via e-motion control. Smooth, staggered, double-row upper pressure rollers ensure uniform pressure distribution on the workpiece. Workpiece distance monitoring with traffic light indicator. Spray application of separator agent. Cutter configuration 60mm Z3+3 'whispercut' tempora series. Glue application roller with reverse function. 50Hz rotary table — edge magazine for coil edge material 0.4-3mm. Ball bearing rotary table, diameter 800mm, for coil edge material. Strip magazine for 12 pieces of 10mm edges. Perfect 608: max. edge thickness 8mm. Edge feeding for coil and strip material, tempora series. Corner processing unit with motorized adjustment for post- and softforming profiles. Application-controlled profiling unit for machining end edges; edge thickness/workpiece height 10-60mm; min. workpiece length 270mm. Wood edges are possible only to a limited extent, depending on edge material. Restrictions apply for loose core layers on post-/softforming parts and extremely thin melamine/foil edges and surface materials. Pneumatically controlled, Teflon-coated glue unit for 1.5kg EVA granulate with synchronized glue roller and quick-change system. Suitable for processing PUR adhesive, taking adhesive processing guidelines into account. Hsdoyx Iwbspfx Acvok

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 0-261-95-3811, functionality: fully functional, operating hours: 2,076 h, input voltage: 400 V, input current: 24 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, We offer this Brandt Highflex 1440 Edge banding machine that has very low hour for a 2016 machine. Hodpfx Acjyx H D Hjvok With edge rounding and corner profiling.

Condition: like new (used), For sale: as-new edge banding machine HolzHer AUGRIA 1308 Hsdpfx Ajyx E Azecvsk Year of manufacture: 2011 Excellent condition from a small joinery shop Equipped with jointing cutters, corner copying unit, and surface scraper Can operate with glue granulate or glue cartridges Detailed machine data and description available in the attached PDF file

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Edgebanding machine with jointer and corner rounding unit Very well-equipped and hardly used edgebanding machine in robust construction, ideal for precise and efficient edge processing in woodworking trades. Equipment: • Jointer unit with 2 counter-rotating diamond cutters • Edge feed for coil and strip material Hsdpeyx Ew Eofx Acvok • Glue unit with glue roller • Pre-end trimming unit (roller) • Pressure unit for optimal pressing • End trimming unit with pulling trimming cut • Flush and radius milling unit • Corner rounding unit for end edges • Radius scraper unit • Surface scraper • Polishing unit • Manual unit adjustment • Control panel with LCD display and keypad • Extendable workpiece support Technical data: • Edge thickness: 0.4 – 5 mm • Workpiece height: 8 – 60 mm • Min. workpiece width: 70 mm • Min. workpiece length: 140 mm • Feed speed: 11 m/min • Extraction port: 120 + 2 × 80 mm • Weight: approx. 990 kg • Approx. dimensions (L × W × H): 4550 × 1550 × 1100 mm

Condition: excellent (used), Model: Hebrock AKV 3006 DKF Pre-milling Station Hjdpfx Acjyx Dfbsvjk Crosscut saws Top/Bottom cutter Corner trimming Scraper Polisher

Condition: like new (used), Hebrock F4 Edgebander Well-equipped, inspection possible before purchase. Pre-milling units, Glue application by roller, Hjdpfx Acjyx Aqcjvjk Equipped with glue drain, Interchangeable glue pot Second glue pot included Pneumatic pre-cut guillotine, Pressure rollers, Finishing saw for edge trimming, Top and bottom milling unit, R1 – R2 Profile scraper Corner rounding unit Flat scraper, Three-point pneumatic adjustment Max workpiece height 50 mm, Max edge thickness (in roll) 3 mm, Feed speed 7 and 10 m/min, Power requirement 7.08 KW, Machine as new, year 2025 Only 1120 meters worked.

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: Minimum workpiece length (mm): 160 Workpiece thickness (mm): 6-60 Edge thickness (mm): 0.4-6 Feed speed (m/min): 10 Overall length (mm): 4930 Weight (kg): 1420 Equipment: 15" touchscreen control Jointing milling unit with 2 milling heads Edge feed Hjdpfsyxyahsx Acvjk GluJet glue application system 2.3 kW, automatic glue height adjustment, sensor nozzle Pneumatic pressure unit Pneumatic end trimming unit Diamond cutters left and right with CM technology Corner copying unit with diamond cutters Surface scraper blade Buffing unit Special equipment: Extendable workpiece support Motorized pressure bridge adjustment with NC axis via program control Diamond jointing cutters left and right Extraction hoods for end trimming unit MOT 4 multifunction milling unit Vertical pneumatic tracing rollers Pneumatic swiveling device for milling unit MOT 4 MOT 2 scraper unit with chip collection box Spraying device for infeed and outfeed areas Availability: by arrangement Location: Röllbach

Condition: used, Year of construction: 2012, functionality: fully functional, Feed speed: 10–18 m/min Workpiece length: min. 160 mm Workpiece width: min. 60 mm Workpiece thickness: 8–60 mm Cutting thickness: 0.4–8 mm With CE certificate, total operating time: 1979 h Hsdpfx Acoyxq Ebevsk

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Min. panel height: 10 mm Max. panel height: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 5 mm The machine is equipped with: RT02 pre-milling unit for precise and clean results. SP03 gluing unit for strong and long-lasting bonding. IT03 end trimming unit for clean and accurate cutting. RF02 edge trimming unit for perfectly angled edge finishing. AR02 corner rounding unit with 2 motors for smooth, rounded edges. Hedpfxjyxq Dde Acvjk Slots for RB02 edge scraping, RC02 glue scraping, and SZ02 brushing units, ensuring every detail is perfectly processed. SMART TOUCH control panel for easy and intuitive operation. Available: August – September 2026

Condition: used, Year of construction: 2012, functionality: fully functional, BRANDT KDF 220 HIGHFLEX Edge Banding Machine with Edge Feeding Unit Edge magazine with 1 grooved roller Edge thickness 0.4–6 mm Workpiece thickness 8–60 mm Feed rate 11 m/min Edge feeding unit 2 x 2.2 kW Hsdjyxp Iujpfx Acvjk Glue application unit A6 Cutting unit 2 x 0.18 kW Fine trimming unit 2 x 0.27 kW Profile trimming unit 1 x 0.35 kW / WD 40 Flat scraper Profile scraper EASY CONTROL EC 10+ control system - Edge feeding unit - Edge magazine (simple) - Pressure rollers (3 units) with pneumatic 2-point adjustment - End trimming saw with pneumatic adjustment for bevel/straight cut - Profile trimming (pneumatic) for bevel/radius/straight cut - Shape trimming (single motor) - Profile scraper with quick-change heads - Flat scraper

Condition: used, Year of construction: 2005, functionality: fully functional, Edge thickness 0.3 - 8 mm Workpiece thickness min. 8 / max. 45 mm Feed rate 10 m/min Jointing milling unit Gluing unit Cutting unit Rough trimming unit Fine trimming unit Profile milling unit Flat scraper unit Profile scraper unit Edge polishing unit Total connected load approx. 13.8 kW Total length: 5,250 mm Jointing cutters: 2 pcs, diameter Single edge feed: available Extraction port diameter: 80 mm Chip collection container (crosscut saw) Extension arm (extendable to the front) Quick-heating gluepot 50 Hz 35.7 A Quick-heating gluepot for adhesive application Heating power 3.2 kW Application roller motor power 0.18 kW Crosscut saw Hsdjyxpywepfx Acvok Motor power 1 x 0.37 kW Speed approx. 15,000 rpm Corner cutter Motor power 1 x 0.37 kW Speed approx. 12,000 rpm Accessories with roller conveyor incl. work cabinet, with edge protection, 6 drawers Jointing cutter 100 x 45.5 x 30 x Z2 Jointing cutter 3 pcs new 100 x 45.5 x 30 x Z2 Leitz reversible knives 12 x 12 x 1.5 Leuco circular saw blades 110 x 3.6 x 22 Z = 20

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, edge thickness (max.): 22 mm, rotational speed (max.): 12,000 rpm, Equipment: CE marking, The machine has the following configuration: Pre-milling unit Automatic, timer-controlled intervention and positioning via NC Edge preheating lamps Edge band magazine Glue pot for EVA hot-melt adhesive Premelter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Hedjyxndbjpfx Acvjk Top and bottom flush trimming unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine finishing and contour trimming unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner rounding unit AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Automatic, timer-controlled intervention End cutting unit RB02 Positioning by NC Glue scraping unit RCC-701 Polishing unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS Panel height min: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Feed pressure with rubber belt Panel support guides with NC positioning CE marking The machine is sold and delivered as is (“as seen and approved”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 7673

Condition: used, machine/vehicle number: 008483, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Max feed speed: 30 m/min Maximum panel thickness: 60 mm Operating Units: 11 nr Hjdpfx Ajyxmx Recvsk

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Safety and sound-proof enclosures/cabins OPTIONAL: Panels in-feed system 63.152 (mm 500 x 500) In-feed fence, adjustable by N.C. Hjdpfx Aoyxl Siocvok Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (EVA Glue) 283.1513 Band Pressure zone + Edge coils supporting unit (No. 1+2 reels) Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-25° Multi Function Unit (Profile contour Trimming unit) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Very neat SCM Olimpic K 230 evo edge bander. Includes extraction pipes with branches up to the shut-off valve. Extra options: - Rounding unit - Nesting sensors - Riepe bottles at 3 positions - Glue scraper unit Technical specifications: - Feed speed m/min: 9 - Panel thickness mm: 8 – 60 - Edge banding thickness in strips mm: 0.4 – 3 Hedpfxoyxhqns Acvsk - Edge banding thickness on coils (incl. covers) mm: 0.4 – 3 - Max. cross-section edge material for trimming mm²: 135 - Coil holder diameter mm: 780 - Max. edge band projection relative to the panel mm: 4 (2 – 2) - Min. distance between 2 panels mm: 700 (600*) - Min. panel length (minimum width 100 mm) - For edge banding in coil or strips mm: 160 (140*) - For solid wood strips mm: 220 (140*) - Min. panel width for edge banding on coil (min. length 210 mm) mm: 90 - Working height of the machine mm: 900 - Width of fixed panel support mm: 500

Condition: used, Year of construction: 2017, functionality: fully functional, Machine Type: Automatic single-sided edge banding machine Key Features: Model: K 800R Hedpfeyxcbhjx Acvsk Capacity: 1 unit, net weight 2,472 kg Purpose: Edge banding and processing of wooden and plastic components for the furniture industry Standards: Complies with European safety regulations (CE certified) Equipment & Accessories: AUTOMATIC SINGLE-SIDE EDGEBANDER European safety regulations (CE norms) Olimpic K 800 "T-ERL" composition (47) Volt 400 EU Frequency 50 Hz "AUTOSET" for ER2, T-ERS and T-ERL compositions "StarTouch" electronic control instead of "Touch 7" Panel spacer on infeed fence Electronic positioning of top presser Horizontal movement of "K-SEL" end cutting unit RAS/S 2P edge scraping unit "AAR" anti-adhesive unit "EASY SIZE" device Edge detecting sensor "IGLUE" kit for gluing unit "SGP" glue pot with manual dosing in substitution of he standard one 2 positions pneumatic kit for RI/800 trimming unit 3 positions pneumatic kit for RI/800 trimming unit Spray-mist device for delicate edges "RCA/2C" glue scraping unit "SPN" brushing unit Edge scraping unit radius = 1 mm Edge scraping unit radius = 2 mm Wood blocks

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0-261-20-3177, functionality: fully functional, Panel thickness 8 - 50 mm Minimum workpiece length 150 mm Minimum workpiece width 70 mm Feed rate 11 m/min Extendable workpiece support ESC electronic control Solid/PVC edging 0.4 - 3 mm Hodpfx Aeyw Rbgjcvjk Strip and roll magazine Guillotine blade for separating edging tape Jointing cutters 2 x 2.2 kW 12,000 rpm Infeed fence manually adjustable with SIKU counter Glue pot underneath. Glue application roller switchable for synchronous/counter-direction Glue station overhauled and cleaned by service technician in 2025 Pressure unit with 1 powered pressure roller and 1 follow-up roller End trimming with 2 swiveling motors 0 - 12° 2 x 0.18 kW 12,000 rpm Flush/bevel/radius milling cutters 2 x 0.27 kW 12,000 rpm Pneumatically controlled radius scraper blade Pneumatically controlled flat scraper blade Chip collection box Weight approx. 1,000 kg Total length 3,570 mm Electrical connection approx. 9.5 kW

Condition: used, Year of construction: 2003, machine/vehicle number: KL 77/A20/S2, functionality: fully functional, feed rate X-axis: 20 m/min, total length: 9,000 mm, Equipment: documentation/manual, We are offering this used HOMAG Optimat kL 77/A20/S2 EVENT edge bander, year of manufacture 2003. Manufacturer: HOMAG Model: Optimat kL 77/A20/S2 EVENT Year of manufacture: 2003 Condition: used Type: edge bander Hsdpfx Acjyw N Apsvjk Edge bander for sale due to purchase of a new machine. The machine is currently still in use and fully operational. It is a very robust machine, including a return system. Very stable and always delivers a perfect finish! Equipment: - Nozzles - Format cutters, 100mm diameter - Blow-off unit - Preheating unit - PUR bonding with cartridge heating station - 7 pressure rollers - Crosscut saws, straight and mitre - Top and bottom roughing cutters - Profile cutters, radius 1/2mm - Profile/flat scrapers - Nozzles - Polishing brushes - Machine equipped with top and bottom belts (very stable design) - Height adjustable at the front (automatic) - Profile cutters automatically adjustable via the program - Crosscut saws automatic - All functions can be switched on/off via the front screen - Return conveyor operated from the PC ->Demo available upon request! Price to be discussed via private message. Please do not hesitate to contact me if you have any questions. If you have any questions or require further information, feel free to send us a message or give us a call.